On 08/07/2024 08:23, George Liu wrote:
> The IEISystems NF5280M7 is an x86 platform server with an
> AST2600-based BMC.
> This dts file provides a basic configuration for its OpenBMC
> development.
>
> Signed-off-by: George Liu <liuxiwei@xxxxxxxxxxxxx>
> ---
No changelog, so did you just ignore all feedback?
> arch/arm/boot/dts/aspeed/Makefile | 1 +
> .../aspeed/aspeed-bmc-ieisystems-nf5280m7.dts | 697 ++++++++++++++++++
> 2 files changed, 698 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ieisystems-nf5280m7.dts
>
> diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
> index 5e3392621697..51531d494415 100644
> --- a/arch/arm/boot/dts/aspeed/Makefile
> +++ b/arch/arm/boot/dts/aspeed/Makefile
> @@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-ibm-rainier-1s4u.dtb \
> aspeed-bmc-ibm-rainier-4u.dtb \
> aspeed-bmc-ibm-system1.dtb \
> + aspeed-bmc-ieisystems-nf5280m7.dtb \
> aspeed-bmc-intel-s2600wf.dtb \
> aspeed-bmc-inspur-fp5280g2.dtb \
> aspeed-bmc-inspur-nf5280m6.dtb \
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ieisystems-nf5280m7.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ieisystems-nf5280m7.dts
> new file mode 100644
> index 000000000000..d706b4f64f6c
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ieisystems-nf5280m7.dts
> @@ -0,0 +1,697 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Copyright (c) 2023 IEISystems Corporation
> +
> +/dts-v1/;
> +
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/leds/leds-pca955x.h>
> +#include <dt-bindings/i2c/i2c.h>
> +
> +/ {
> + model = "NF5280M7 BMC";
> + compatible = "ieisystems,nf5280m7-bmc", "aspeed,ast2600";
> + aliases {
> + i2c200 = &bus2_mux70_0;
> + i2c500 = &bus5_mux00;
> + i2c501 = &bus5_mux01;
> + i2c600 = &i2c6s0ch0;
> + i2c601 = &i2c6s0ch1;
> + i2c602 = &i2c6s0ch2;
> + i2c603 = &i2c6s0ch3;
> + i2c604 = &i2c6s0ch4;
> + i2c605 = &i2c6s0ch5;
> + i2c606 = &i2c6s0ch6;
> + i2c607 = &i2c6s0ch7;
> + i2c610 = &i2c6s1ch0;
> + i2c611 = &i2c6s1ch1;
> + i2c612 = &i2c6s1ch2;
> + i2c613 = &i2c6s1ch3;
> + i2c614 = &i2c6s1ch4;
> + i2c615 = &i2c6s1ch5;
> + i2c616 = &i2c6s1ch6;
> + i2c617 = &i2c6s1ch7;
> + i2c620 = &i2c6s2ch0;
> + i2c621 = &i2c6s2ch1;
> + i2c622 = &i2c6s2ch2;
> + i2c623 = &i2c6s2ch3;
> + i2c624 = &i2c6s2ch4;
> + i2c625 = &i2c6s2ch5;
> + i2c626 = &i2c6s2ch6;
> + i2c627 = &i2c6s2ch7;
> + };
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200n8";
Not much improved.
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x80000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + video_engine_memory: jpegbuffer {
> + size = <0x02000000>; /* 32M */
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> +
> + vga_memory: frammebuffer {
> + no-map;
> + reg = <0x9ff00000 0x01000000>; /* 16M */
> + };
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
> + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
> + <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
> + <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + cpld {
It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).
> + label = "cpld";
> + gpios = <&gpio0 ASPEED_GPIO(N, 2) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(N, 2)>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + fan-fault {
It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).
> + label = "fan-fault";
> + gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
> + };
> +
> + system-hot {
> + label = "system-hot";
> + gpios = <&gpio0 ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>;
> + };
> +
> + psu-fault {
> + label = "psu-fault";
> + gpios = <&gpio0 ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + heartbeat {
> + label = "heartbeat";
> + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
> + };
> +
> + memory-fault {
> + label = "memory-fault";
> + gpios = <&gpio0 ASPEED_GPIO(Y, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + system-fault {
> + label = "system-fault";
> + gpios = <&gpio0 ASPEED_GPIO(Y, 3) GPIO_ACTIVE_LOW>;
> + };
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> +
> + flash@0 {
> + status = "okay";
> +
> + m25p,fast-read;
> + label = "bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout-64.dtsi"
> + };
> + flash@1 {
> + status = "okay";
> +
> + m25p,fast-read;
> + label = "alt-bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout-64-alt.dtsi"
> + };
> +};
> +
> +
> +&spi1 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default>;
> +
> + flash@0 {
> + status = "okay";
> +
> + m25p,fast-read;
> + label = "bios";
> + spi-max-frequency = <50000000>;
> + };
> +};
> +
> +&peci0 {
> + status = "okay";
> +
> + gpios = <&gpio0 ASPEED_GPIO(F, 6) 0>;
> +
> + peci-client@30 {
> + compatible = "intel,peci-client";
> + reg = <0x30>;
> + };
> +
> + peci-client@31 {
> + compatible = "intel,peci-client";
> + reg = <0x31>;
> + };
> +};
> +
> +&gpio0 {
> + status = "okay";
> +
> + gpio-line-names =
> + /*A0-A7*/ "","","","","","","","",
> + /*B0-B7*/ "","","","","","","","",
> + /*C0-C7*/ "","","","","","","","",
> + /*D0-D7*/ "","","","","","","","",
> + /*E0-E7*/ "","","","","","","","",
> + /*F0-F7*/ "","","","","","","","",
> + /*G0-G7*/ "","","","","","","","",
> + /*H0-H7*/ "","","","","","","","",
> + /*I0-I7*/ "","","","","","POWER_OUT","RESET_OUT","",
> + /*J0-J7*/ "","","","","","","","",
> + /*K0-K7*/ "","","","","","","","",
> + /*L0-L7*/ "","","","","","","","",
> + /*M0-M7*/ "","","","","","","","",
> + /*N0-N7*/ "","","","","","","","",
> + /*O0-O7*/ "","","","","","","","",
> + /*P0-P7*/ "RESET_BUTTON","","","NMI_BUTTON","NMI_OUT","","","",
> + /*Q0-Q7*/ "","","","","","","","",
> + /*R0-R7*/ "","","","","","","","",
> + /*S0-S7*/ "","","","SIO_ONCONTROL","","","","",
> + /*T0-T7*/ "","","","","","","","",
> + /*U0-U7*/ "","","","","","","","",
> + /*V0-V7*/ "","SIO_S5","POWER_BUTTON","","PS_PWROK","","","",
> + /*W0-W7*/ "","","","","","","","",
> + /*X0-X7*/ "","","POST_COMPLETE","","","","","",
> + /*Y0-Y7*/ "","","","","","","","",
> + /*Z0-Z7*/ "","","","","","","","";
> +};
> +
> +&kcs3 {
> + aspeed,lpc-io-reg = <0xCA2>;
> + status = "okay";
> +};
> +
> +&kcs4 {
> + aspeed,lpc-io-reg = <0xCA4>;
> + status = "okay";
> +};
> +
> +&lpc_snoop {
> + snoop-ports = <0x80>;
> + status = "okay";
> +};
> +
> +&mdio1 {
> + status = "okay";
> +
> + ethphy1: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + };
> +};
> +
> +&mac2 {
> + status = "okay";
> +
> + phy-mode = "rgmii";
> + phy-handle = <ðphy1>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii3_default>;
> +};
> +
> +&mac3 {
> + status = "okay";
> +
> + phy-mode = "rmii";
> + use-ncsi;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii4_default>;
> +};
> +
> +&adc0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
> + &pinctrl_adc2_default &pinctrl_adc3_default
> + &pinctrl_adc4_default &pinctrl_adc5_default
> + &pinctrl_adc6_default &pinctrl_adc7_default>;
> +};
> +
> +&adc1 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
> + &pinctrl_adc10_default &pinctrl_adc11_default
> + &pinctrl_adc12_default &pinctrl_adc13_default
> + &pinctrl_adc14_default &pinctrl_adc15_default>;
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> +};
> +
> +&uart4 {
> + status = "okay";
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&vuart1 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + multi-master;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + multi-master;
> + status = "okay";
> +
> + eeprom@50 {
> + compatible = "atmel,24c256";
> + reg = <0x50>;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + i2c-mux@70 {
> + compatible = "nxp,pca9546";
> + reg = <0x70>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + bus2_mux70_0:i2c@2 {
Why did you change the format and dropped the space after :?
Please respond to previous feedback and acknowledge each comment.
Best regards,
Krzysztof
