Re: [PATCH v4 2/2] mmc: sdhci-of-ma35d1: Add Nuvoton MA35D1 SDHCI driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/07/2024 08:26, Shan-Chun Hung wrote:
> Add the SDHCI driver for the MA35D1 platform. It is based upon the
> SDHCI interface, but requires some extra initialization.
> 
> Signed-off-by: Shan-Chun Hung <shanchun1218@xxxxxxxxx>
> ---
>  drivers/mmc/host/Kconfig           |  12 ++
>  drivers/mmc/host/Makefile          |   1 +
>  drivers/mmc/host/sdhci-of-ma35d1.c | 297 +++++++++++++++++++++++++++++
>  3 files changed, 310 insertions(+)
>  create mode 100644 drivers/mmc/host/sdhci-of-ma35d1.c
> 
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index bb0d4fb0892a..aa6922ff4210 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -252,6 +252,18 @@ config MMC_SDHCI_OF_SPARX5
> 
>  	  If unsure, say N.
> 
> +config MMC_SDHCI_OF_MA35D1
> +	tristate "SDHCI OF support for the MA35D1 SDHCI controller"
> +	depends on ARCH_MA35 || COMPILE_TEST
> +	depends on MMC_SDHCI_PLTFM
> +	help
> +	  This selects the MA35D1 Secure Digital Host Controller Interface.
> +	  The controller supports SD/MMC/SDIO devices.
> +
> +	  If you have a controller with this interface, say Y or M here.
> +
> +	  If unsure, say N.
> +
>  config MMC_SDHCI_CADENCE
>  	tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller"
>  	depends on MMC_SDHCI_PLTFM
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index f53f86d200ac..3ccffebbe59b 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -88,6 +88,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)	+= sdhci-of-esdhc.o
>  obj-$(CONFIG_MMC_SDHCI_OF_HLWD)		+= sdhci-of-hlwd.o
>  obj-$(CONFIG_MMC_SDHCI_OF_DWCMSHC)	+= sdhci-of-dwcmshc.o
>  obj-$(CONFIG_MMC_SDHCI_OF_SPARX5)	+= sdhci-of-sparx5.o
> +obj-$(CONFIG_MMC_SDHCI_OF_MA35D1)	+= sdhci-of-ma35d1.o
>  obj-$(CONFIG_MMC_SDHCI_BCM_KONA)	+= sdhci-bcm-kona.o
>  obj-$(CONFIG_MMC_SDHCI_IPROC)		+= sdhci-iproc.o
>  obj-$(CONFIG_MMC_SDHCI_NPCM)		+= sdhci-npcm.o
> diff --git a/drivers/mmc/host/sdhci-of-ma35d1.c b/drivers/mmc/host/sdhci-of-ma35d1.c
> new file mode 100644
> index 000000000000..b5aab65b9093
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-of-ma35d1.c
> @@ -0,0 +1,297 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2024 Nuvoton Technology Corp.
> + *
> + * Author: Shan-Chun Hung <shanchun1218@xxxxxxxxx>
> + */
> +
> +#include <linux/align.h>
> +#include <linux/array_size.h>
> +#include <linux/bits.h>
> +#include <linux/build_bug.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/dev_printk.h>
> +#include <linux/device.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/err.h>
> +#include <linux/math.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/minmax.h>
> +#include <linux/mmc/card.h>
> +#include <linux/mmc/host.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +#include <linux/sizes.h>
> +#include <linux/types.h>
> +
> +#include "sdhci-pltfm.h"
> +#include "sdhci.h"
> +
> +#define MA35_SYS_MISCFCR0	0x070
> +#define MA35_SDHCI_MSHCCTL	0x508
> +#define MA35_SDHCI_MBIUCTL	0x510
> +
> +#define MA35_SDHCI_CMD_CONFLICT_CHK	BIT(0)
> +#define MA35_SDHCI_INCR_MSK		GENMASK(3, 0)
> +#define MA35_SDHCI_INCR16		BIT(3)
> +#define MA35_SDHCI_INCR8		BIT(2)
> +
> +struct ma35_priv {
> +	struct regmap		*regmap;

Drop, you don't use it.

> +	struct reset_control	*rst;
> +	struct pinctrl		*pinctrl;
> +	struct pinctrl_state	*pins_uhs;
> +	struct pinctrl_state	*pins_default;
> +};
> +
> +struct ma35_restore_data {
> +	u32	reg;
> +	u32	width;
> +};
> +

...

> +
> +static int ma35_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct sdhci_pltfm_host *pltfm_host;
> +	struct sdhci_host *host;
> +	struct ma35_priv *priv;
> +	int err;
> +	u32 extra, ctl;
> +
> +	host = sdhci_pltfm_init(pdev, &sdhci_ma35_pdata, sizeof(struct ma35_priv));
> +	if (IS_ERR(host))
> +		return PTR_ERR(host);
> +
> +	/* Extra adma table cnt for cross 128M boundary handling. */
> +	extra = DIV_ROUND_UP_ULL(dma_get_required_mask(dev), SZ_128M);
> +	extra = min(extra, SDHCI_MAX_SEGS);
> +
> +	host->adma_table_cnt += extra;
> +	pltfm_host = sdhci_priv(host);
> +	priv = sdhci_pltfm_priv(pltfm_host);
> +
> +	pltfm_host->clk = devm_clk_get_optional_enabled(dev, NULL);
> +	if (IS_ERR(pltfm_host->clk)) {
> +		err = PTR_ERR(pltfm_host->clk);
> +		dev_err_probe(dev, err, "failed to get clk\n");

Syntax is err = dev_err_probe()

> +		goto err_sdhci;
> +	}
> +
> +	err = mmc_of_parse(host->mmc);
> +	if (err)
> +		goto err_sdhci;
> +
> +	priv->rst = devm_reset_control_get_exclusive(dev, NULL);
> +	if (IS_ERR(priv->rst)) {
> +		err = PTR_ERR(priv->rst);
> +		dev_err_probe(dev, err, "failed to get reset control\n");

err = dev_err_probe

... so all your previous versions were leaking memory. Double check your
error paths.

> +		goto err_sdhci;
> +	}
> +
> +	sdhci_get_of_property(pdev);
> +

Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux