Hi Kamel, On Wed, Jul 03, 2024 at 04:25:18PM +0200, Kamel Bouhara wrote: > Add a new driver for the TouchNetix's axiom family of > touchscreen controllers. This driver only supports i2c > and can be later adapted for SPI and USB support. > > Signed-off-by: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx> > --- This is coming together nicely; just a few trailing comments on top of Marco's feedback. > MAINTAINERS | 1 + > drivers/input/touchscreen/Kconfig | 14 + > drivers/input/touchscreen/Makefile | 1 + > drivers/input/touchscreen/touchnetix_axiom.c | 616 +++++++++++++++++++ > 4 files changed, 632 insertions(+) > create mode 100644 drivers/input/touchscreen/touchnetix_axiom.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 2041384d3866..ac6b612bfbba 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -22745,6 +22745,7 @@ M: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx> > L: linux-input@xxxxxxxxxxxxxxx > S: Maintained > F: Documentation/devicetree/bindings/input/touchscreen/touchnetix,ax54a.yaml > +F: drivers/input/touchscreen/touchnetix_axiom.c > > TPM DEVICE DRIVER > M: Peter Huewe <peterhuewe@xxxxxx> > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > index c821fe3ee794..1ce8f1c25625 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -834,6 +834,20 @@ config TOUCHSCREEN_MIGOR > To compile this driver as a module, choose M here: the > module will be called migor_ts. > > +config TOUCHSCREEN_TOUCHNETIX_AXIOM > + tristate "TouchNetix AXIOM based touchscreen controllers" > + depends on I2C > + select CRC16 > + select REGMAP_I2C > + help > + Say Y here if you have a axiom touchscreen connected to > + your system. > + > + If unsure, say N. > + > + To compile this driver as a module, choose M here: the > + module will be called axiom. > + > config TOUCHSCREEN_TOUCHRIGHT > tristate "Touchright serial touchscreen" > select SERIO > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile > index a81cb5aa21a5..6ce7b804adc7 100644 > --- a/drivers/input/touchscreen/Makefile > +++ b/drivers/input/touchscreen/Makefile > @@ -91,6 +91,7 @@ obj-$(CONFIG_TOUCHSCREEN_SUR40) += sur40.o > obj-$(CONFIG_TOUCHSCREEN_SURFACE3_SPI) += surface3_spi.o > obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o > obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o > +obj-$(CONFIG_TOUCHSCREEN_TOUCHNETIX_AXIOM) += touchnetix_axiom.o > obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o > obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o > obj-$(CONFIG_TOUCHSCREEN_TS4800) += ts4800-ts.o > diff --git a/drivers/input/touchscreen/touchnetix_axiom.c b/drivers/input/touchscreen/touchnetix_axiom.c > new file mode 100644 > index 000000000000..cea52dafc913 > --- /dev/null > +++ b/drivers/input/touchscreen/touchnetix_axiom.c > @@ -0,0 +1,616 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * TouchNetix axiom Touchscreen Driver > + * > + * Copyright (C) 2020-2023 TouchNetix Ltd. > + * > + * Author(s): Bart Prescott <bartp@xxxxxxxxxxxxxx> > + * Pedro Torruella <pedro.torruella@xxxxxxxxxxxxxx> > + * Mark Satterthwaite <mark.satterthwaite@xxxxxxxxxxxxxx> > + * Hannah Rossiter <hannah.rossiter@xxxxxxxxxxxxxx> > + * Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx> > + * > + */ Please include bits.h as well. > +#include <linux/bitfield.h> > +#include <linux/crc16.h> > +#include <linux/delay.h> > +#include <linux/device.h> > +#include <linux/gpio/consumer.h> > +#include <linux/i2c.h> > +#include <linux/input.h> > +#include <linux/input/mt.h> > +#include <linux/input/touchscreen.h> > +#include <linux/interrupt.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/mod_devicetable.h> > +#include <linux/regmap.h> > + > +#include <asm/unaligned.h> > +#define AXIOM_PROX_LEVEL -128 > +#define AXIOM_STARTUP_TIME_MS 110 > +/* > + * Register group u31 has 2 pages for usage table entries. > + */ > +#define AXIOM_U31_MAX_USAGES 0xff > +#define AXIOM_U31_BYTES_PER_USAGE 6 > +#define AXIOM_U31_PAGE0_LENGTH 0x0C > +#define AXIOM_U31_BOOTMODE_MASK BIT(7) > +#define AXIOM_U31_DEVID_MASK GENMASK(14, 0) > + > +#define AXIOM_MAX_REPORT_LEN 0x7f > + > +#define AXIOM_CMD_HEADER_READ_MASK BIT(15) > +#define AXIOM_U41_MAX_TARGETS 10 > + > +#define AXIOM_U46_AUX_CHANNELS 4 > +#define AXIOM_U46_AUX_MASK GENMASK(11, 0) > + > +#define AXIOM_COMMS_MAX_USAGE_PAGES 3 > +#define AXIOM_COMMS_PAGE_SIZE 256 > +#define AXIOM_COMMS_REPORT_LEN_MASK GENMASK(6, 0) > + > +#define AXIOM_REPORT_USAGE_ID 0x34 > +#define AXIOM_DEVINFO_USAGE_ID 0x31 > +#define AXIOM_USAGE_2HB_REPORT_ID 0x01 > +#define AXIOM_USAGE_2AUX_REPORT_ID 0x46 > +#define AXIOM_USAGE_2DCTS_REPORT_ID 0x41 > + > +#define AXIOM_PAGE_OFFSET_MASK GENMASK(6, 0) > + > +struct axiom_devinfo { > + __le16 device_id; > + u8 fw_minor; > + u8 fw_major; > + u8 fw_info_extra; > + u8 tcp_revision; > + u8 bootloader_fw_minor; > + u8 bootloader_fw_major; > + __le16 jedec_id; > + u8 num_usages; > +} __packed; > + > +/* > + * Describes parameters of a specific usage, essentially a single element of > + * the "Usage Table" > + */ > +struct axiom_usage_entry { > + u8 id; > + bool is_report; > + u8 start_page; > + u8 num_pages; > +}; > + > +/* > + * Represents state of a touch or target when detected prior to a touch (eg. > + * hover or proximity events). > + */ > +enum axiom_target_state { > + AXIOM_TARGET_STATE_NOT_PRESENT = 0, > + AXIOM_TARGET_STATE_PROX = 1, > + AXIOM_TARGET_STATE_HOVER = 2, > + AXIOM_TARGET_STATE_TOUCHING = 3, > +}; > + > +struct axiom_u41_target { > + enum axiom_target_state state; > + u16 x; > + u16 y; > + s8 z; > + /* force target report processing */ > + bool insert; > + bool touch; > +}; > + > +struct axiom_target_report { > + u8 index; > + bool present; > + u16 x; > + u16 y; > + s8 z; > +}; > + > +union axiom_cmd_header { > + __le32 preamble; > + struct { > + __le16 target_address; > + __le16 length; > + } head; > +}; > + > +struct axiom_data { > + struct axiom_devinfo devinfo; > + struct device *dev; > + struct gpio_desc *reset_gpio; > + struct i2c_client *client; > + struct input_dev *input_dev; > + u32 max_report_len; > + u8 rx_buf[AXIOM_COMMS_MAX_USAGE_PAGES * AXIOM_COMMS_PAGE_SIZE]; > + struct axiom_u41_target targets[AXIOM_U41_MAX_TARGETS]; > + struct axiom_usage_entry usage_table[AXIOM_U31_MAX_USAGES]; > + bool usage_table_populated; > + struct regmap *regmap; > + struct touchscreen_properties prop; It looks like a tab snuck in here. > +}; > + > +static const struct regmap_config axiom_i2c_regmap_config = { > + .reg_bits = 32, > + .reg_format_endian = REGMAP_ENDIAN_LITTLE, > + .val_bits = 8, > + .val_format_endian = REGMAP_ENDIAN_LITTLE, > +}; > + > +/* > + * axiom devices are typically configured to report touches at a rate > + * of 100Hz (10ms) for systems that require polling for reports. > + * When reports are polled, it will be expected to occasionally > + * observe the overflow bit being set in the reports. > + * This indicates that reports are not being read fast enough. This comment is strange; if reports are not read quickly enough at the default rate, why not set the default rate at the slowest for which the overflow bit is not set? > + */ > +#define POLL_INTERVAL_DEFAULT_MS 10 > + > +/* Translate usage/page/offset triplet into physical address. */ > +static u16 axiom_usage_to_target_address(struct axiom_data *ts, u8 usage, u8 page, > + char offset) > +{ > + /* At the moment the convention is that u31 is always at physical address 0x0 */ > + if (!ts->usage_table_populated) { > + if (usage == AXIOM_DEVINFO_USAGE_ID) > + return ((page << 8) + offset); > + else > + return 0xffff; Checkpatch normally gripes if an else follows a return; did that not happen here? You should simplify it either way: if (...) { if (...) return ...; return U16_MAX; } > + } > + > + if (page >= ts->usage_table[usage].num_pages) { > + dev_err(ts->dev, "Invalid usage table! usage: u%02x, page: %02x, offset: %02x\n", > + usage, page, offset); > + return 0xffff; > + } > + > + return ((ts->usage_table[usage].start_page + page) << 8) + offset; > +} > + > +static int axiom_read(struct axiom_data *ts, u8 usage, u8 page, void *buf, u16 len) > +{ > + union axiom_cmd_header cmd_header; > + int ret; For consistency, please use 'error' as is done throughout. > + > + cmd_header.head.target_address = > + cpu_to_le16(axiom_usage_to_target_address(ts, usage, page, 0)); > + cmd_header.head.length = cpu_to_le16(len | AXIOM_CMD_HEADER_READ_MASK); > + > + ret = regmap_write(ts->regmap, le32_to_cpu(cmd_header.preamble), 0); > + if (ret) { > + dev_err(ts->dev, "failed to write preamble, error %d\n", ret); > + return ret; > + } > + > + ret = regmap_raw_read(ts->regmap, 0, buf, len); > + if (ret) { > + dev_err(ts->dev, "failed to read target address %04x, error %d\n", > + cmd_header.head.target_address, ret); > + return ret; > + } > + > + return 0; > +} > + > +/* > + * One of the main purposes for reading the usage table is to identify > + * which usages reside at which target address. > + * When performing subsequent reads or writes to AXIOM, the target address > + * is used to specify which usage is being accessed. > + * Consider the following discovery code which will build up the usage table. > + */ > +static u32 axiom_populate_usage_table(struct axiom_data *ts) > +{ > + struct axiom_usage_entry *usage_table; > + u8 *rx_data = ts->rx_buf; > + u32 max_report_len = 0; > + u32 usage_id; > + int error; > + > + usage_table = ts->usage_table; > + > + /* Read the second page of usage u31 to get the usage table */ > + error = axiom_read(ts, AXIOM_DEVINFO_USAGE_ID, 1, rx_data, > + (AXIOM_U31_BYTES_PER_USAGE * ts->devinfo.num_usages)); > + > + if (error) > + return error; > + > + for (usage_id = 0; usage_id < ts->devinfo.num_usages; usage_id++) { > + u16 offset = (usage_id * AXIOM_U31_BYTES_PER_USAGE); > + u8 id = rx_data[offset + 0]; > + u8 start_page = rx_data[offset + 1]; > + u8 num_pages = rx_data[offset + 2]; > + u32 max_offset = ((rx_data[offset + 3] & AXIOM_PAGE_OFFSET_MASK) + 1) * 2; > + > + usage_table[id].is_report = !num_pages; > + > + /* Store the entry into the usage table */ > + usage_table[id].id = id; > + usage_table[id].start_page = start_page; > + usage_table[id].num_pages = num_pages; > + > + dev_dbg(ts->dev, "Usage u%02x Info: %*ph\n", id, AXIOM_U31_BYTES_PER_USAGE, > + &rx_data[offset]); > + > + /* Identify the max report length the module will receive */ > + if (usage_table[id].is_report && max_offset > max_report_len) > + max_report_len = max_offset; > + } > + > + ts->usage_table_populated = true; > + > + return max_report_len; > +} > + > +static int axiom_discover(struct axiom_data *ts) > +{ > + int error; > + > + /* > + * Fetch the first page of usage u31 to get the > + * device information and the number of usages > + */ > + error = axiom_read(ts, AXIOM_DEVINFO_USAGE_ID, 0, &ts->devinfo, AXIOM_U31_PAGE0_LENGTH); It seems a little safer, and more intuitive, to pass sizeof(ts->devinfo) instead of AXIOM_U31_PAGE0_LENGTH. To that end, devinfo is only 11 bytes in size, but you're reading 12 bytes. I'm guessing the compiler is padding axiom_data which is the only reason the existing implementation seems to work. > + if (error) > + return error; > + > + dev_dbg(ts->dev, " Boot Mode : %s\n", > + FIELD_GET(AXIOM_U31_BOOTMODE_MASK, > + le16_to_cpu(ts->devinfo.device_id)) ? "BLP" : "TCP"); > + dev_dbg(ts->dev, " Device ID : %04lx\n", > + FIELD_GET(AXIOM_U31_DEVID_MASK, le16_to_cpu(ts->devinfo.device_id))); > + dev_dbg(ts->dev, " Firmware Rev : %02x.%02x\n", ts->devinfo.fw_major, > + ts->devinfo.fw_minor); > + dev_dbg(ts->dev, " Bootloader Rev : %02x.%02x\n", ts->devinfo.bootloader_fw_major, > + ts->devinfo.bootloader_fw_minor); > + dev_dbg(ts->dev, " FW Extra Info : %04x\n", ts->devinfo.fw_info_extra); > + dev_dbg(ts->dev, " Silicon : %04x\n", le16_to_cpu(ts->devinfo.jedec_id)); > + dev_dbg(ts->dev, " Number usages : %04x\n", ts->devinfo.num_usages); > + > + ts->max_report_len = axiom_populate_usage_table(ts); > + if (!ts->max_report_len || !ts->devinfo.num_usages || > + ts->max_report_len > AXIOM_MAX_REPORT_LEN) { > + dev_err(ts->dev, "Invalid report length or usages number"); > + return -EINVAL; > + } > + > + dev_dbg(ts->dev, "Max Report Length: %u\n", ts->max_report_len); > + > + return 0; > +} > + > +/* > + * Support function to axiom_process_u41_report. > + * Generates input-subsystem events for every target. > + * After calling this function the caller shall issue > + * a Sync to the input sub-system. > + */ > +static bool axiom_process_u41_report_target(struct axiom_data *ts, > + struct axiom_target_report *target) > +{ > + struct input_dev *input_dev = ts->input_dev; > + struct axiom_u41_target *target_prev_state; > + enum axiom_target_state current_state; > + int id; > + > + /* Verify the target index */ > + if (target->index >= AXIOM_U41_MAX_TARGETS) { > + dev_err(ts->dev, "Invalid target index! %u\n", target->index); > + return false; > + } > + > + target_prev_state = &ts->targets[target->index]; > + > + current_state = AXIOM_TARGET_STATE_NOT_PRESENT; > + > + if (target->present) { > + if (target->z >= 0) > + current_state = AXIOM_TARGET_STATE_TOUCHING; > + else if (target->z > AXIOM_PROX_LEVEL && target->z < 0) > + current_state = AXIOM_TARGET_STATE_HOVER; > + else if (target->z == AXIOM_PROX_LEVEL) > + current_state = AXIOM_TARGET_STATE_PROX; > + } > + > + id = target->index; > + > + dev_dbg(ts->dev, "U41 Target T%u, present:%u, x:%u, y:%u, z:%d\n", > + target->index, target->present, > + target->x, target->y, target->z); > + > + switch (current_state) { > + case AXIOM_TARGET_STATE_NOT_PRESENT: > + case AXIOM_TARGET_STATE_PROX: > + if (!target_prev_state->insert) > + break; > + target_prev_state->insert = false; > + > + input_mt_report_slot_inactive(input_dev); > + /* > + * make sure the previous coordinates are > + * all off screen when the finger comes back > + */ > + target->x = 65535; > + target->y = 65535; > + target->z = AXIOM_PROX_LEVEL; > + break; > + case AXIOM_TARGET_STATE_HOVER: > + case AXIOM_TARGET_STATE_TOUCHING: > + target_prev_state->insert = true; > + input_mt_slot(ts->input_dev, id); > + input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true); > + input_report_abs(input_dev, ABS_MT_TRACKING_ID, id); > + input_report_abs(input_dev, ABS_MT_POSITION_X, target->x); > + input_report_abs(input_dev, ABS_MT_POSITION_Y, target->y); > + > + if (current_state == AXIOM_TARGET_STATE_TOUCHING) { > + input_report_abs(input_dev, ABS_MT_DISTANCE, 0); > + input_report_abs(input_dev, ABS_MT_PRESSURE, target->z); > + } else { > + input_report_abs(input_dev, ABS_MT_DISTANCE, -target->z); > + input_report_abs(input_dev, ABS_MT_PRESSURE, 0); > + } > + > + break; > + default: > + break; > + } > + > + target_prev_state->state = current_state; > + target_prev_state->x = target->x; > + target_prev_state->y = target->y; > + target_prev_state->z = target->z; > + > + return true; > +} > + > +/* > + * U41 is the output report of the 2D CTS and contains the status of targets > + * (including contacts and pre-contacts) along with their X,Y,Z values. > + * When a target has been removed (no longer detected), > + * the corresponding X,Y,Z values will be zeroed. > + */ > +static bool axiom_process_u41_report(struct axiom_data *ts, u8 *rx_buf) > +{ > + struct axiom_target_report target; > + bool update_done = false; > + u16 target_status; > + int i; > + > + target_status = get_unaligned_le16(rx_buf + 1); > + > + for (i = 0; i < AXIOM_U41_MAX_TARGETS; i++) { > + u8 *target_step = &rx_buf[i * 4]; > + > + target.index = i; > + target.present = ((target_status & (1 << i)) != 0) ? true : false; > + target.x = get_unaligned_le16(target_step + 3); > + target.y = get_unaligned_le16(target_step + 5); > + target.z = (s8)(rx_buf[i + 43]); > + update_done |= axiom_process_u41_report_target(ts, &target); > + } > + > + return update_done; > +} > + > +/* > + * Validates the crc and demultiplexes the axiom reports to the appropriate > + * report handler > + */ > +static int axiom_handle_events(struct axiom_data *ts) > +{ > + struct input_dev *input_dev = ts->input_dev; > + u8 *report_data = ts->rx_buf; > + struct device *dev = ts->dev; > + u16 crc_report; > + u8 *crc_bytes; > + u16 crc_calc; > + int error; > + u8 len; > + > + error = axiom_read(ts, AXIOM_REPORT_USAGE_ID, 0, report_data, ts->max_report_len); > + if (error) > + return error; > + > + len = (report_data[0] & AXIOM_COMMS_REPORT_LEN_MASK) << 1; > + if (len <= 2) { > + dev_err(dev, "Zero length report discarded.\n"); > + return -ENODATA; > + } > + > + /* Validate the report CRC */ > + crc_bytes = &report_data[len]; > + > + crc_report = get_unaligned_le16(crc_bytes - 2); > + /* Length is in 16 bit words and remove the size of the CRC16 itself */ > + crc_calc = crc16(0, report_data, (len - 2)); > + > + if (crc_calc != crc_report) { > + dev_err(dev, > + "CRC mismatch! Expected: %#x, Calculated CRC: %#x.\n", > + crc_report, crc_calc); > + return -EINVAL; > + } > + > + switch (report_data[1]) { > + case AXIOM_USAGE_2DCTS_REPORT_ID: > + if (axiom_process_u41_report(ts, &report_data[1])) { > + input_mt_sync_frame(input_dev); > + input_sync(input_dev); > + } > + break; > + > + case AXIOM_USAGE_2AUX_REPORT_ID: > + /* This is an aux report (force), not used currently */ > + break; > + > + case AXIOM_USAGE_2HB_REPORT_ID: > + /* This is a heartbeat report */ > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static void axiom_i2c_poll(struct input_dev *input_dev) > +{ > + struct axiom_data *ts = input_get_drvdata(input_dev); > + > + axiom_handle_events(ts); > +} > + > +static irqreturn_t axiom_irq(int irq, void *dev_id) > +{ > + struct axiom_data *ts = dev_id; > + > + axiom_handle_events(ts); > + > + return IRQ_HANDLED; > +} > + > +static void axiom_reset(struct gpio_desc *reset_gpio) > +{ > + gpiod_set_value_cansleep(reset_gpio, 1); > + usleep_range(1000, 2000); > + gpiod_set_value_cansleep(reset_gpio, 0); > + msleep(AXIOM_STARTUP_TIME_MS); > +} > + > +static int axiom_i2c_probe(struct i2c_client *client) > +{ > + struct device *dev = &client->dev; > + struct input_dev *input_dev; > + struct axiom_data *ts; > + u32 poll_interval; > + int target; > + int error; > + > + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); > + if (!ts) > + return -ENOMEM; > + > + i2c_set_clientdata(client, ts); > + ts->client = client; > + ts->dev = dev; > + > + ts->regmap = devm_regmap_init_i2c(client, &axiom_i2c_regmap_config); > + error = PTR_ERR_OR_ZERO(ts->regmap); > + if (error) { > + dev_err(dev, "Failed to initialize regmap: %d\n", error); > + return error; > + } > + > + error = devm_regulator_get_enable(dev, "vddi"); > + if (error) > + return dev_err_probe(&client->dev, error, > + "Failed to enable VDDI regulator\n"); > + > + error = devm_regulator_get_enable(dev, "vdda"); > + if (error) > + return dev_err_probe(&client->dev, error, > + "Failed to enable VDDA regulator\n"); > + > + ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); > + if (IS_ERR(ts->reset_gpio)) > + return dev_err_probe(dev, PTR_ERR(ts->reset_gpio), "failed to get reset GPIO\n"); > + > + /* Make sure the time after a power ON sequence is meet */ > + if (ts->reset_gpio) > + axiom_reset(ts->reset_gpio); > + else > + msleep(AXIOM_STARTUP_TIME_MS); > + > + error = axiom_discover(ts); > + if (error) > + return dev_err_probe(dev, error, "Failed touchscreen discover\n"); > + > + input_dev = devm_input_allocate_device(ts->dev); > + if (!input_dev) > + return -ENOMEM; > + > + input_dev->name = "TouchNetix axiom Touchscreen"; > + input_dev->phys = "input/axiom_ts"; > + > + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, 65535, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, 65535, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_FINGER, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_DISTANCE, 0, 127, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 127, 0, 0); > + > + touchscreen_parse_properties(input_dev, true, &ts->prop); > + > + /* Registers the axiom device as a touchscreen instead of a mouse pointer */ > + error = input_mt_init_slots(input_dev, AXIOM_U41_MAX_TARGETS, INPUT_MT_DIRECT); > + if (error) > + return error; > + > + /* Enables the raw data for up to 4 force channels to be sent to the input subsystem */ > + set_bit(EV_MSC, input_dev->evbit); > + /* Declare that we support "RAW" Miscellaneous events */ > + set_bit(MSC_RAW, input_dev->mscbit); Neither of these event types are reported; please drop them. > + > + ts->input_dev = input_dev; > + input_set_drvdata(ts->input_dev, ts); > + > + /* Ensure that all reports are initialised to not be present. */ > + for (target = 0; target < AXIOM_U41_MAX_TARGETS; target++) > + ts->targets[target].state = AXIOM_TARGET_STATE_NOT_PRESENT; > + > + if (client->irq) { > + error = devm_request_threaded_irq(dev, client->irq, NULL, > + axiom_irq, IRQF_ONESHOT, dev_name(dev), ts); > + if (error) > + dev_err_probe(dev, error, "failed to request irq"); > + } else { > + error = input_setup_polling(input_dev, axiom_i2c_poll); > + if (error) > + return dev_err_probe(ts->dev, error, "Unable to set up polling mode\n"); > + > + if (!device_property_read_u32(ts->dev, "poll-interval", &poll_interval)) > + input_set_poll_interval(input_dev, poll_interval); > + else > + input_set_poll_interval(input_dev, POLL_INTERVAL_DEFAULT_MS); > + } > + > + error = input_register_device(input_dev); > + if (error) > + return dev_err_probe(ts->dev, error, "failed to register input device\n"); > + > + return 0; > +} > + > +static const struct i2c_device_id axiom_i2c_id_table[] = { > + { "ax54a" }, > + { }, Please drop the comma after the sentinel as was done below. > +}; > +MODULE_DEVICE_TABLE(i2c, axiom_i2c_id_table); > + > +static const struct of_device_id axiom_i2c_of_match[] = { > + { .compatible = "touchnetix,ax54a", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, axiom_i2c_of_match); > + > +static struct i2c_driver axiom_i2c_driver = { > + .driver = { > + .name = "axiom", > + .of_match_table = axiom_i2c_of_match, > + }, > + .id_table = axiom_i2c_id_table, > + .probe = axiom_i2c_probe, > +}; > +module_i2c_driver(axiom_i2c_driver); > + > +MODULE_AUTHOR("Bart Prescott <bartp@xxxxxxxxxxxxxx>"); > +MODULE_AUTHOR("Pedro Torruella <pedro.torruella@xxxxxxxxxxxxxx>"); > +MODULE_AUTHOR("Mark Satterthwaite <mark.satterthwaite@xxxxxxxxxxxxxx>"); > +MODULE_AUTHOR("Hannah Rossiter <hannah.rossiter@xxxxxxxxxxxxxx>"); > +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>"); > +MODULE_DESCRIPTION("TouchNetix axiom touchscreen I2C bus driver"); > +MODULE_LICENSE("GPL"); > -- > 2.25.1 > Kind regards, Jeff LaBundy