Linux Device Tree

• Thread Index

• Re: [PATCH v5 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v8 3/7] thermal/drivers/tsens: Add TSENS enable and calibration support for V2
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• [PATCH 10/12] arm64: dts: renesas: Add initial device tree for RZ/G3E SMARC EVK board
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 08/12] arm64: dts: renesas: Add initial DTSI for RZ/G3E SoC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 09/12] arm64: dts: renesas: Add initial support for RZ/G3E SMARC SoM
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 04/12] dt-bindings: clock: renesas: Document RZ/G3E SoC CPG
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 01/12] dt-bindings: serial: renesas: Document RZ/G3E (r9a09g047) scif
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 03/12] dt-bindings: soc: renesas: Document RZ/G3E SMARC SoM and Carrier-II EVK
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 00/12] Add support for Renesas RZ/G3E SoC and SMARC-EVK platform
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 02/12] dt-bindings: soc: renesas: Document Renesas RZ/G3E SoC variants
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: ipq5424: configure spi0 node for rdp466
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: ipq5424: add spi0 node
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 2/4] pinctrl: qcom: ipq5424: split spi0 pin group
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: pinctrl: qcom: update spi0 function
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH 0/4] Add SPI0 support for IPQ5424
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v8 3/7] thermal/drivers/tsens: Add TSENS enable and calibration support for V2
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: qcs615-ride: Enable ethernet node
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• [PATCH] of/fdt: Implement use BIN_ATTR_SIMPLE macro for fdt sysfs attribute
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v3 10/10] iio: adc: ad7124: Implement temperature measurement
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v3 09/10] iio: adc: ad7124: Add error reporting during probe
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v3 08/10] iio: adc: ad_sigma_delta: Check for previous ready signals
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v3 07/10] iio: adc: ad_sigma_delta: Store information about reset sequence length
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v3 06/10] iio: adc: ad_sigma_delta: Fix a race condition
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v3 04/10] iio: adc: ad_sigma_delta: Add support for reading irq status using a GPIO
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v3 05/10] iio: adc: ad_sigma_delta: Handle CS assertion as intended in ad_sd_read_reg_raw()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v3 03/10] dt-bindings: iio: adc: adi,ad7124: Allow specifications of a gpio for irq line
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v3 02/10] iio: adc: ad7124: Refuse invalid input specifiers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v3 01/10] iio: adc: ad7124: Don't create more channels than the driver can handle
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v3 00/10] iio: adc: ad7124: Various fixes
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: adf4371: add rdiv2 and doubler
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 2/2] iio: frequency: adf4371: add ref doubler and div2
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: pmic: enable rtc
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v1 2/2] arm64: dts: mediatek: mt8186: Add Starmie device
  • From: Wojciech Macek <wmacek@xxxxxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: arm: mediatek: Add MT8186 Starmie Chromebooks
  • From: Wojciech Macek <wmacek@xxxxxxxxxxxx>
• [PATCH v1 0/2] Add Starmie Chromebooks
  • From: Wojciech Macek <wmacek@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: pmic: enable rtc
  • From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
• Re: [PATCH v3 8/9] arm64: dts: qcom: Add display support for QCS615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 9/9] arm64: dts: qcom: Add display support for QCS615 RIDE board
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] power: supply: cros_usbpd-charger: extend as a thermal of cooling device
  • From: Thomas Weißschuh <thomas@xxxxxxxx>
• Re: [PATCH v3 7/9] drm/msm/dsi: Add support for SM6150
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 6/9] drm/msm/dsi: Add dsi phy support for SM6150
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 5/9] drm/msm/dpu: Add SM6150 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/3] EDAC: Versal NET: Add support for error notification
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxx>
• [PATCH 2/3] cdx: add DDRMC commands
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxx>
• [PATCH 1/3] dt-bindings: memory-controllers: Add support for Versal NET EDAC
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxx>
• [PATCH 0/3] EDAC: Versal NET: Add support for error notification
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxx>
• Re: [PATCH v3 4/9] drm/msm: mdss: Add SM6150 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• [PATCH v3 9/9] arm64: dts: qcom: Add display support for QCS615 RIDE board
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 8/9] arm64: dts: qcom: Add display support for QCS615
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 7/9] drm/msm/dsi: Add support for SM6150
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 6/9] drm/msm/dsi: Add dsi phy support for SM6150
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 5/9] drm/msm/dpu: Add SM6150 support
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] memory: mtk-smi: mt8188: Add SMI clamp function
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 4/9] drm/msm: mdss: Add SM6150 support
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 3/9] dt-bindings: display/msm: Add SM6150 MDSS & DPU
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 2/9] dt-bindings: display/msm: dsi-controller-main: Document SM6150
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 1/9] dt-bindings: display/msm: Add SM6150 DSI phy
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v3 0/9] Add display support for QCS615 platform
  • From: Fange Zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v2] arm64: zynqmp: add clock-output-names property in clock nodes
  • From: Naman Trivedi <naman.trivedimanojbhai@xxxxxxx>
• [PATCH v3 RESEND 10/10] arm64: dts: apple: t8015: Add PMGR nodes
  • From: Nick Chan <towinchenmi@xxxxxxxxx>
• [PATCH v3 RESEND 09/10] arm64: dts: apple: t8011: Add PMGR nodes
  • From: Nick Chan <towinchenmi@xxxxxxxxx>
• [PATCH v3 RESEND 08/10] arm64: dts: apple: t8010: Add PMGR nodes
  • From: Nick Chan <towinchenmi@xxxxxxxxx>
• [PATCH v3 RESEND 07/10] arm64: dts: apple: s8001: Add PMGR nodes
  • From: Nick Chan <towinchenmi@xxxxxxxxx>
• [PATCH v3 RESEND 06/10] arm64: dts: apple: s8000: Add PMGR nodes
  • From: Nick Chan <towinchenmi@xxxxxxxxx>
• [PATCH v3 RESEND 05/10] arm64: dts: apple: t7001: Add PMGR node
  • From: Nick Chan <towinchenmi@xxxxxxxxx>
• [PATCH v3 RESEND 04/10] arm64: dts: apple: t7000: Add PMGR node
  • From: Nick Chan <towinchenmi@xxxxxxxxx>
• [PATCH v3 RESEND 03/10] arm64: dts: apple: s5l8960x: Add PMGR node
  • From: Nick Chan <towinchenmi@xxxxxxxxx>
• [PATCH v3 RESEND 02/10] dt-bindings: arm: apple: apple,pmgr-pwrstate: Add A7-A11 compatibles
  • From: Nick Chan <towinchenmi@xxxxxxxxx>
• [PATCH v3 RESEND 01/10] dt-bindings: arm: apple: apple,pmgr: Add A7-A11 compatibles
  • From: Nick Chan <towinchenmi@xxxxxxxxx>
• [PATCH v3 RESEND 00/10] Add PMGR nodes for Apple A7-A11 SoCs
  • From: Nick Chan <towinchenmi@xxxxxxxxx>
• Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] memory: mtk-smi: mt8188: Add SMI clamp function
  • From: Friday Yang (杨阳) <Friday.Yang@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: memory: mediatek: Add SMI reset and clamp related property
  • From: Friday Yang (杨阳) <Friday.Yang@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] memory: mtk-smi: mt8188: Add SMI clamp function
  • From: Friday Yang (杨阳) <Friday.Yang@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: memory: mediatek: Add SMI reset and clamp related property
  • From: Friday Yang (杨阳) <Friday.Yang@xxxxxxxxxxxx>
• Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH 2/3] arm64: dts: qcom: x1e80100-romulus: Set up PCIe3 / SDCard reader
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: x1e80100-romulus: Set up PS8830s
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH v2 3/6] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/6] phy: qcom: qmp: Add phy register and clk setting for QCS615 PCIe
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 7/7] drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: qcs615: add the GPU SMMU node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH 2/2] remoteproc: qcom: pas: Add SM8750 MPSS
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: remoteproc: Add SM8750 MPSS and CDSP
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 3/3] dt-bindings: w1: ds2482: Add vcc-supply property
  • From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
• [PATCH v2 2/3] w1: ds2482: Fix datasheet URL
  • From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
• [PATCH v2 0/3] Add support for attaching a regulator to w1: ds2482
  • From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
• [PATCH v2 1/3] w1: ds2482: Add regulator support
  • From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
• Re: [PATCH RFC v2 1/1] rust: Add bindings for device properties
  • From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
• Re: [PATCH 2/2] interconnect: qcom: sdx75: Drop QP0 related interconnect and BCM nodes
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2
  • From: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
• Re: [PATCH V4 0/5] arm_scmi: vendors: Qualcomm Generic Vendor Extensions
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 2/8] serial: sh-sci: Check if TX data was written to device in .tx_empty()
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
• [PATCH RFC v2 1/1] rust: Add bindings for device properties
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: rockchip: rk3568: add reset-names for combphy
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH 00/37] drm/vc4: Add support for BCM2712 / Pi5 display hardware
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• [PATCH 2/2] ARM: dts: microchip: sam9x75_curiosity: Add power monitor support
  • From: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: microchip: sam9x7: Move i2c address/size to dtsi
  • From: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
• [PATCH 0/2] Add power monitor support on sam9x75-curiosity board
  • From: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] phy: rockchip: naneng-combphy: fix phy reset
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: qcs8300: Add watchdog node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: rockchip: rk3568: add reset-names for combphy
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: qcs615: add the GPU SMMU node
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: arm-smmu: document QCS615 GPU SMMU
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• [PATCH 0/2] Add support for GPU SMMU on QCS615
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: mfd: cros-ec: add properties for thermal cooling cells
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH V4 0/2] Enable TRNG for QCS8300
  • From: Yuvaraj Ranganathan <quic_yrangana@xxxxxxxxxxx>
• [PATCH V4 1/2] dt-bindings: crypto: qcom,prng: document QCS8300
  • From: Yuvaraj Ranganathan <quic_yrangana@xxxxxxxxxxx>
• [PATCH V4 2/2] arm64: dts: qcom: qcs8300: add TRNG node
  • From: Yuvaraj Ranganathan <quic_yrangana@xxxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS615 QMP PCIe PHY Gen3 x1
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 2/2] phy: rockchip: naneng-combphy: fix phy reset
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: rockchip: rk3568: add reset-names for combphy
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V5 4/4] interconnect: qcom: osm-l3: Add epss compatibles for SA8775P SoC
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH v1 6/6] drm/mediatek: Add support for MT8195 Digital Parallel Interface
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
  • From: "Cheng Jiang (IOE)" <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH v2 3/6] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 1/2] arm64: dts: qcom: qcs615: add SDHC1 and SDHC2
  • From: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
• [PATCH v3 0/2] Enable SDHC1 and SDHC2 on QCS615
  • From: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
• [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: enable SDHC1 and SDHC2
  • From: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx>
• [PATCH v3 2/3] arm64: dts: qcom: qcs615: add UFS node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v3 3/3] arm64: dts: qcom: qcs615-ride: Enable UFS node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• [PATCH v3 0/3] Enable UFS on QCS615
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• Re: [PATCH v1 3/6] drm/mediatek: mtk_dpi: Use an array for pixclk factor calculation
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: qcs615: add UFS node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
  • From: Kuldeep Singh <quic_kuldsing@xxxxxxxxxxx>
• Re: [PATCH v1 3/6] drm/mediatek: mtk_dpi: Use an array for pixclk factor calculation
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: mfd: cros-ec: add properties for thermal cooling cells
  • From: Sung-Chi Li <lschyi@xxxxxxxxxxxx>
• [PATCH 1/2] power: supply: cros_usbpd-charger: extend as a thermal of cooling device
  • From: Sung-Chi Li <lschyi@xxxxxxxxxxxx>
• [PATCH 0/2] Extend the cros_usbpd-charger to make it a passive thermal cooling device
  • From: Sung-Chi Li <lschyi@xxxxxxxxxxxx>
• RE: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
  • From: Ying Liu <victor.liu@xxxxxxx>
• [PATCH v2 5/6] arm64: dts: qcom: qcs615: enable pcie for qcs615 soc
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS615 QMP PCIe PHY Gen3 x1
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 3/6] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 0/6] pci: qcom: Add QCS615 PCIe support
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 2/6] phy: qcom: qmp: Add phy register and clk setting for QCS615 PCIe
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 4/6] PCI: qcom: Add QCS615 PCIe support
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 6/6] arm64: dts: qcom: qcs615: enable pcie for qcs615 platform dts
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• Re: [PATCH v5 4/9] drm/vs: Add Hardware Functions for VS DC8200
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: quic_zijuhu <quic_zijuhu@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: usb: qcom,dwc3: Make ss_phy_irq optional for X1E80100
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: x1e80100-romulus: Set up PS8830s
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: x1e80100-romulus: Set up PCIe3 / SDCard reader
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH 1/3] arm64: dts: qcom: x1e80100-romulus: Configure audio
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH 0/3] More Surface Laptop 7 features
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• [PATCH v2 5/6] arm64: dts: qcom: qcs615: enable pcie for qcs615 soc
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 2/6] phy: qcom: qmp: Add phy register and clk setting for QCS615 PCIe
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 0/6] pci: qcom: Add QCS615 PCIe support
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS615 QMP PCIe PHY Gen3 x1
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 3/6] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 6/6] arm64: dts: qcom: qcs615: enable pcie for qcs615 platform dts
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2 4/6] PCI: qcom: Add QCS615 PCIe support
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• Re: [PATCH v1 2/6] drm/mediatek: mtk_dpi: Add support for Pattern Generator in debugfs
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v1 1/6] dt-bindings: display: mediatek: dpi: Add MT8195 and MT8188 compat
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: "Cheng Jiang (IOE)" <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH 1/3] platform/chrome: cros_ec_charge_state: add new driver to control charge
  • From: "Sung-Chi, Li" <lschyi@xxxxxxxxxxxx>
• Re: [PATCH 0/3] Add standalone ethernet MAC entries for qcs615
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: net: qcom,ethqos: revise description for qcs615
  • From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
• Re: [PATCH v2 0/6] Revise Meta(Facebook) Harma BMC(AST2600)
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: dts: aspeed: catalina: revise catalina dts file
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 9/9] drm/vs: Add VS DRM Master Driver for JH7110 SoC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 7/9] drm/vs: Add VS Plane API
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 6/9] drm/vs: Add CRTC Functions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 5/9] drm/vs: Add Base API for VS Mode Configuration
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 4/9] drm/vs: Add Hardware Functions for VS DC8200
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 8/9] drm/vs: Add Innosilicon HDMI Support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• RE: [PATCH v7 3/3] clk: aspeed: add AST2700 clock driver.
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v4 15/18] dt-bindings: usb: Add ports to google,cros-ec-typec for DP altmode
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 30/37] clk: bcm: rpi: Add ISP to exported clocks
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 31/37] clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 32/37] clk: bcm: rpi: Enable minimize for all firmware clocks
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 33/37] clk: bcm: rpi: Create helper to retrieve private data
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 34/37] clk: bcm: rpi: Add disp clock
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v3 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add node for qps615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 2/2] serial: fsl_linflexuart: add clock management
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] interconnect: qcom: sdx75: Drop QP0 related interconnect and BCM nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: interconnect: qcom: drop QPIC_CORE IDs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: (pmbus/adp1050): add support for adp1051, adp1055 and ltp8800
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] of: property: fw_devlink: Do not use interrupt-parent directly
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] PCI: dwc: Add ECAM support with iATU configuration
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/8] serial: sh-sci: Check if TX data was written to device in .tx_empty()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: rockchip: Add devicetree for the ROC-RK3576-PC
  • From: Jonas Karlman <jonas@xxxxxxxxx>
• Re: [PATCH v9 2/3] dt-bindings: leds: Add LED1202 LED Controller
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v1 1/7] dt-bindings: display: mediatek: Add binding for HDMIv2 DDC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v30 02/30] xhci: sec-intr: add initial api to register a secondary interrupter entity
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v2 7/8] dt-bindings: iio: kx022a: Support KX134-1211
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: iio: dac: adi-axi-adc: Add ad7606 variant
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v30 02/30] xhci: sec-intr: add initial api to register a secondary interrupter entity
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH V5 2/4] arm64: dts: qcom: sa8775p: add EPSS l3 interconnect provider
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V5 2/4] arm64: dts: qcom: sa8775p: add EPSS l3 interconnect provider
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: interconnect: qcom: drop QPIC_CORE IDs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 2/2] interconnect: qcom: sdx75: Drop QP0 related interconnect and BCM nodes
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: interconnect: qcom: drop QPIC_CORE IDs
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH 0/2] Drop QPIC related interconnect and BCM nodes on
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: Enable Primary USB controller on QCS615 Ride
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: Add support for usb node on QCS615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 3/3] leds: Add LED1202 I2C driver
  • From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: dts: aspeed: catalina: revise catalina dts file
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v5 16/16] net: stmmac: platform: Fix PTP clock rate reading
  • From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: qcs615: add UFS node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: qcs615: add UFS node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v9] leds: Add LED1202 I2C driver
  • From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
• [PATCH v9 2/3] dt-bindings: leds: Add LED1202 LED Controller
  • From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
• [PATCH v9 1/3] Documentation:leds: Add leds-st1202.rst
  • From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
• [PATCH v9 0/3] Add LED1202 LED Controller
  • From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: iio: dac: adi-axi-adc: Add ad7606 variant
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH] PCI/pwrctl: Do not assume device node presence
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: w1: ds2482: Add vcc-supply property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: w1: ds2482: Add vcc-supply property
  • From: Kryštof Černý <cleverline1mc@xxxxxxxxx>
• Re: [PATCH v13 4/7] remoteproc: Introduce release_fw optional operation
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: "Cheng Jiang (IOE)" <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH v30 28/30] ALSA: usb-audio: Add USB offload route kcontrol
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 1/8] dt-bindings: mailbox: mediatek: Add GCE header file for MT8196
  • From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
• Re: [PATCH 00/37] drm/vc4: Add support for BCM2712 / Pi5 display hardware
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: usb: Add microchip USB5807 HUB
  • From: AKASH KUMAR <quic_akakum@xxxxxxxxxxx>
• Re: [PATCH 1/3] platform/chrome: cros_ec_charge_state: add new driver to control charge
  • From: Thomas Weißschuh <thomas@xxxxxxxx>
• Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH 1/3] platform/chrome: cros_ec_charge_state: add new driver to control charge
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] platform/chrome: cros_ec_charge_state: add new driver to control charge
  • From: Thomas Weißschuh <thomas@xxxxxxxx>
• [PATCH v2 4/4] media: rcar-csi2: Allow specifying C-PHY line order
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v2 2/4] media: v4l: fwnode: Parse MiPI DisCo for C-PHY line-orders
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v2 1/4] media: dt-bindings: Add property to describe CSI-2 C-PHY line orders
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• [PATCH v2 0/4] media: v4l: fwnode: Add support for CSI-2 C-PHY line orders
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: serial: Add a new compatible string for ums9632
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: ti: k3-am64-main: Switch ICSSG clock to core clock
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: soc: ti: pruss: Add clocks for ICSSG
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: soc: ti: pruss: Add clocks for ICSSG
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH 1/3] platform/chrome: cros_ec_charge_state: add new driver to control charge
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/3] PCI: dwc: Add ECAM support with iATU configuration
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: "Javier Carrasco" <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: iio: light: Document TI OPT4060 RGBW sensor
  • From: "Javier Carrasco" <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: serial: Add a new compatible string for ums9632
  • From: Stanislav Jakubek <stano.jakubek@xxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• Re: [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V5 2/4] arm64: dts: qcom: sa8775p: add EPSS l3 interconnect provider
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V5 4/4] interconnect: qcom: osm-l3: Add epss compatibles for SA8775P SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: mailbox: mediatek: Add GCE header file for MT8196
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] arm64: zynqmp: add clock-output-names property in clock nodes
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 4/5] arm64: dts: imx8mp: Add fsl,dsp-ctrl property for dsp
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
  • From: Pratyush Brahma <quic_pbrahma@xxxxxxxxxxx>
• [PATCH] arm64: zynqmp: add clock-output-names property in clock nodes
  • From: Naman Trivedi <naman.trivedimanojbhai@xxxxxxx>
• RE: [PATCH 4/5] arm64: dts: imx8mp: Add fsl,dsp-ctrl property for dsp
  • From: Peng Fan <peng.fan@xxxxxxx>
• [PATCH V5 4/4] interconnect: qcom: osm-l3: Add epss compatibles for SA8775P SoC
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH V5 3/4] interconnect: qcom: Add EPSS L3 support on SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH V5 2/4] arm64: dts: qcom: sa8775p: add EPSS l3 interconnect provider
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH V5 1/4] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• [PATCH V5 0/4] Add EPSS L3 provider support on SA8775P SoC
  • From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
• Re: [PATCH 0/8] Add GCE support for MT8196
  • From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: mailbox: mediatek: Add GCE header file for MT8196
  • From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
• Re: [PATCH 4/8] soc: mediatek: mtk-cmdq: Add unsupported subsys ID programing flow
  • From: Jason-JH Lin (林睿祥) <Jason-JH.Lin@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 9/9] iio: adc: ad7606: Add support for writing registers when using backend
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 8/9] iio: adc: ad7606: Simplify channel macros
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 7/9] iio: adc: ad7606: change r/w_register signature
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 6/9] iio: adc: adi-axi-adc: Add support for AD7606 register writing
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 5/9] iio: adc: adi-axi-adc: Add platform children support
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 4/9] iio: adc: ad7606: Move software functions into common file
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 3/9] iio:adc: ad7606: Move the software mode configuration
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 2/9] dt-bindings: iio: dac: adi-axi-adc: Add ad7606 variant
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 0/9] Add support for Software mode on AD7606's iio backend driver
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 1/9] iio: adc: ad7606: Fix hardcoded offset in the ADC channels
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: r9a06g032: add r9a06g032-rzn1d400-eb board device-tree
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• RE: [RFC v2 1/1] fpga-region: Add generic IOCTL interface for runtime FPGA programming
  • From: "Manne, Nava kishore" <nava.kishore.manne@xxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: vendor-prefixes: Add TouchNetix AS
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: usb: Add microchip USB5807 HUB
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• RE: [PATCH v5 1/9] dt-bindings: display: bindings for starfive,JH7110 display pipeline
  • From: Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 8/9] arm64: dts: qcom: Add display support for QCS615 RIDE board
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• Re: [PATCH v2 6/9] drm/msm/dsi: Add support for QCS615
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• Re: [PATCH v2 6/9] drm/msm/dsi: Add support for QCS615
  • From: fange zhang <quic_fangez@xxxxxxxxxxx>
• [PATCH v5 1/2] arm64: dts: qcom: sa8775p: add DisplayPort device nodes
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v5 0/2] Enable Display Port for Qualcomm SA8775P-ride platform
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v5 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• Re: [PATCH 0/8] Add GCE support for MT8196
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v7 4/5] media: platform: mediatek: isp: add mediatek ISP3.0 camsv
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v7 3/5] media: platform: mediatek: isp: add mediatek ISP3.0 sensor interface
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v7 5/5] arm64: dts: mediatek: mt8365: Add support for camera
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v7 2/5] dt-bindings: media: add mediatek ISP3.0 camsv
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v7 1/5] dt-bindings: media: add mediatek ISP3.0 sensor interface
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH v7 0/5] Add Mediatek ISP3.0
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: vendor-prefixes: Add TouchNetix AS
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: mailbox: mediatek: Add GCE header file for MT8196
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/5] firmware_loader: add support to handle FW_UPLOAD_ERR_SKIP
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v3 0/7] Add Aspeed G7 FTGMAC100 support
  • From: Paolo Abeni <pabeni@xxxxxxxxxx>
• Re: [PATCH v1 1/6] dt-bindings: display: mediatek: dpi: Add MT8195 and MT8188 compat
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
  • From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: usb: Add microchip USB5807 HUB
  • From: AKASH KUMAR <quic_akakum@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: reset: mediatek: Add mt8188 SMI reset control binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: net: can: atmel: Convert to json schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 1/9] dt-bindings: display: bindings for starfive,JH7110 display pipeline
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 8/8] iio: accel: kx022a: Support KX134-1211
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 7/8] dt-bindings: iio: kx022a: Support KX134-1211
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 6/8] iio: kx022a: Support ROHM KX134ACR-LBZ
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 5/8] dt-bindings: ROHM KX134ACR-LBZ
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 4/8] iio: accel: kx022a: Support ICs with different G-ranges
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 3/8] iio: accel: kx022a: Use cleanup.h helpers
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 2/8] iio: gts: Simplify using __free
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 1/8] iio: accel: kx022a: Improve reset delay
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 0/8] Support ROHM KX134ACR-LBZ
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 0/5] Input: Add support for TouchNetix aXiom touchscreen
  • From: Kamel BOUHARA <kamel.bouhara@xxxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: vendor-prefixes: Add TouchNetix AS
  • From: Kamel BOUHARA <kamel.bouhara@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Add APDS9160 binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: vendor-prefixes: Add TouchNetix AS
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 16/16] net: stmmac: platform: Fix PTP clock rate reading
  • From: Paolo Abeni <pabeni@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: w1: ds2482: Add vcc-supply property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: qcs615: add UFS node
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: qcom: qcs615: enable pcie for qcs615
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: PCI: qcom: Document the QCS615 PCIe Controller
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• Re: [PATCH 2/5] phy: qcom: qmp: Add phy register and clk setting for QCS615 PCIe
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS615 QMP PCIe PHY Gen3 x1
  • From: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx>
• [PATCH v2] ARM: dts: socfpga: sodia: Fix mdio bus probe and PHY address
  • From: Nobuhiro Iwamatsu <iwamatsu@xxxxxxxxxxx>
• Re: [PATCH 4/8] soc: mediatek: mtk-cmdq: Add unsupported subsys ID programing flow
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH 4/8] soc: mediatek: mtk-cmdq: Add unsupported subsys ID programing flow
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: Enable Primary USB controller on QCS615 Ride
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2 1/2] arm64: dts: qcom: Add support for usb node on QCS615
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2 0/2] Add DT Support for primary USB on QCS615
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v7 3/3] coresight: dummy: Add static trace id support for dummy source
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v7 1/3] dt-bindings: arm: Add arm,static-trace-id for coresight dummy source
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v7 2/3] coresight: Add support to get static id for system trace sources
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v7 0/3] coresight: Add static trace id support
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: socfpga: sodia: Fix mdio bus probe and PHY ID
  • From: Nobuhiro Iwamatsu <iwamatsu@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: ipq5424: Add watchdog node
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: watchdog: Document Qualcomm IPQ5424
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v2 0/2] Add watchdog support for IPQ5424
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v4 3/3] arm64: dts: qcom: ipq5424: Add LLCC/system-cache-controller
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v4 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• [PATCH v4 0/3] qcom: ipq5424: Add LLCC/system-cache-controller
  • From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/2] ARM: dts: aspeed: catalina: remove interrupt of GPIOB4 form all IOEXP
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH 1/2] ARM: dts: aspeed: catalina: revise ltc4287 shunt-resistor value
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH 0/2] ARM: dts: aspeed: catalina: revise catalina dts file
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: [PATCH v2 0/6] Revise Meta(Facebook) Harma BMC(AST2600)
  • From: PeterYin <peteryin.openbmc@xxxxxxxxx>
• [PATCH 1/8] dt-bindings: mailbox: mediatek: Add GCE header file for MT8196
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• [PATCH 6/8] soc: mediatek: Add pa_base due to CMDQ API change
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• [PATCH 4/8] soc: mediatek: mtk-cmdq: Add unsupported subsys ID programing flow
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• [PATCH 3/8] mailbox: mtk-cmdq: Add driver data to support for MT8196
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• [PATCH 8/8] media: mediatek: mdp3: Add pa_base due to CMDQ API change
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• [PATCH 2/8] dt-bindings: mailbox: mediatek: Add MT8196 support for gce-mailbox
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• [PATCH 5/8] soc: mediatek: mtk-cmdq: Add mminfra_offset compatibility for DRAM address
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• [PATCH 0/8] Add GCE support for MT8196
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• [PATCH 7/8] drm/mediatek: Add pa_base due to CMDQ API change
  • From: "Jason-JH.Lin" <jason-jh.lin@xxxxxxxxxxxx>
• Re: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] wifi: wilc1000: Rework bus locking
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: i2c: spacemit: add support for K1 SoC
  • From: Troy Mitchell <troymitchell988@xxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: spacemit: add support for SpacemiT K1 SoC
  • From: Troy Mitchell <troymitchell988@xxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] media: i2c: imx290: Add configuration for IMX462
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] media: i2c: imx290: Register 0x3011 varies between imx327 and imx290
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: sprd: Remove unused and undocumented "constant_charge_voltage_max_microvolt" property
  • From: Chunyan Zhang <zhang.lyra@xxxxxxxxx>
• [PATCH v2 6/6] ARM: dts: aspeed: Harma: add adc128d818
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v2 5/6] ARM: dts: aspeed: Harma: fan board io-expander
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v2 4/6] ARM: dts: aspeed: Harma: add e1s power monitor
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v2 3/6] ARM: dts: aspeed: Harma: Revise GPIO line name
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v2 2/6] ARM: dts: aspeed: Harma: Add retimer device
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v2 1/6] ARM: dts: aspeed: Harma: Revise node name
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• [PATCH v2 0/6] Revise Meta(Facebook) Harma BMC(AST2600)
  • From: Peter Yin <peteryin.openbmc@xxxxxxxxx>
• RE: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• RE: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: input: Add Nuvoton MA35D1 keypad
  • From: Ming-Jen Chen <mjchen0829@xxxxxxxxx>
• Re: [PATCH v30 02/30] xhci: sec-intr: add initial api to register a secondary interrupter entity
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: reset: mediatek: Add mt8188 SMI reset control binding
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• [PATCH v2] of: property: fw_devlink: Do not use interrupt-parent directly
  • From: Samuel Holland <samuel.holland@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v30 00/30] Introduce QC USB SND audio offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH] of: property: fw_devlink: Do not use interrupt-parent directly
  • From: Samuel Holland <samuel.holland@xxxxxxxxxx>
• Re: [GIT PULL] Devicetree updates for v6.13
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH 3/3] dt-bindings: w1: ds2482: Add vcc-supply property
  • From: Kryštof Černý <cleverline1mc@xxxxxxxxx>
• Re: [PATCH v30 15/30] ASoC: usb: Fetch ASoC card and pcm device information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 0/5] Improve Rockchip VOP2 display modes handling on RK3588 HDMI0
  • From: FUKAUMI Naoki <naoki@xxxxxxxxx>
• Re: [PATCH v30 26/30] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH RESEND v2 2/2] pwm: Add Nuvoton MA35D1 PWM controller support
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Add APDS9160 binding
  • From: Mikael Gonella-Bolduc <mgonellabolduc@xxxxxxxxxxxx>
• Re: [PATCH v3 1/8] dt-bindings: clock: imx8m-clock: support spread spectrum clocking
  • From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/3] mips: dts: realtek: Add SPI NAND controller
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH net 2/2] net: ethernet: oa_tc6: fix tx skb race condition between reference pointers
  • From: Jacob Keller <jacob.e.keller@xxxxxxxxx>
• Re: [PATCH net 1/2] net: ethernet: oa_tc6: fix infinite loop error when tx credits becomes 0
  • From: Jacob Keller <jacob.e.keller@xxxxxxxxx>
• [PATCH v2 4/4] media: i2c: imx290: Add configuration for IMX462
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• [PATCH v2 3/4] media: dt-bindings: sony,imx290: Add IMX462 to the IMX290 binding
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• [PATCH v2 1/4] media: i2c: imx290: Limit analogue gain according to module
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• [PATCH v2 2/4] media: i2c: imx290: Register 0x3011 varies between imx327 and imx290
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• [PATCH v2 0/4] media: i2c: imx290: Add support for imx462
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• Re: [PATCH v30 28/30] ALSA: usb-audio: Add USB offload route kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 2/5] firmware_loader: add support to handle FW_UPLOAD_ERR_SKIP
  • From: Russ Weight <russ.weight@xxxxxxxxx>
• Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v30 01/30] usb: host: xhci: Repurpose event handler for skipping interrupter events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwmon: (pmbus/adp1050): Add bindings for adp1051, adp1055 and ltp8800
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwmon: (pmbus/adp1050): Add bindings for adp1051, adp1055 and ltp8800
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwmon: (pmbus/adp1050): Add bindings for adp1051, adp1055 and ltp8800
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH net-next v2 8/8] dt-bindings: net: sparx5: document RGMII MAC delays
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 3/3] media: i2c: imx290: Add configuration for IMX462
  • From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
• [PATCH] arm64: dts: rockchip: rk3588: add msi-parent for pcie3x4_ep
  • From: Niklas Cassel <cassel@xxxxxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwmon: (pmbus/adp1050): Add bindings for adp1051, adp1055 and ltp8800
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: trivial-devices: add sensirion,sht3x
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH RESEND v2 2/2] pwm: Add Nuvoton MA35D1 PWM controller support
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• Re: [PATCH 2/5] firmware_loader: add support to handle FW_UPLOAD_ERR_SKIP
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: qcs8300: Add watchdog node
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Add APDS9160 binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Add APDS9160 binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: Add APDS9160 binding
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v6 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwmon: (pmbus/adp1050): Add bindings for adp1051, adp1055 and ltp8800
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: qcs615: add UFS node
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v13 4/7] remoteproc: Introduce release_fw optional operation
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [PATCH 2/5] firmware_loader: add support to handle FW_UPLOAD_ERR_SKIP
  • From: Russ Weight <russ.weight@xxxxxxxxx>
• Re: [PATCH v5 2/9] riscv: dts: Add display property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: qcom: sa8775p-ride: update BT nodes
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: mips: Document mti,mips-cm
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 5/5] arm64: dts: qcom: Add support for QCS9075 Ride & Ride-r3
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: arm: qcom: Document rb8/ride/ride-r3 on QCS9075
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 0/2] ARM: dts: microchip: Add no-1-8-v property to sdmmc0 node
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 0/5] arm64: qcom: Add support for QCS9075 boards
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 0/5] arm64: qcom: Add support for QCS9075 boards
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v13 4/7] remoteproc: Introduce release_fw optional operation
  • From: Arnaud POULIQUEN <arnaud.pouliquen@xxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: Add dsp rproc related mem regions
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH 2/2] hwmon: (pmbus/adp1050): add support for adp1051, adp1055 and ltp8800
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: trivial-devices: add isil,raa228004
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: chrome: add new binding google,cros-ec-chrage-state
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: chrome: add new binding google,cros-ec-chrage-state
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: qspi: cdns,qspi-nor: Add compatible string to support OSPI controller on Versal Gen2 platform
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: iio: light: Document TI OPT4060 RGBW sensor
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• [PATCH v6 0/2] Support for Texas Instruments OPT4060 RGBW Color sensor.
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: trivial-devices: add ipmb-dev
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: trivial-devices: add ipmb-dev
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v13 4/7] remoteproc: Introduce release_fw optional operation
  • From: Arnaud POULIQUEN <arnaud.pouliquen@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: marvell: cn9131-cf-solidwan: fix cp1 comphy links
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] platform/chrome: cros_ec_charge_state: add new driver to control charge
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH 00/15] Add support for SAMA7D65
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 0/5] Configure imx8mp dsp node for rproc usage
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: trivial-devices: add ipmb-dev
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: [PATCH v6 04/28] media: iris: introduce iris core state management with shared queues
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v3 3/3] net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: Add dsp rproc related mem regions
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/2] dt-bindings: trivial-devices: add RAA228004 and IPMB-DEV
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: trivial-devices: add isil,raa228004
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v6 26/28] media: iris: add check to allow sub states transitions
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH v3 6/6] PCI: pwrctl: Add power control driver for qps615
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: ti: k3-am62l: add initial reference board file
  • From: Bryan Brattlof <bb@xxxxxx>
• [PATCH v6 16/28] media: iris: implement vb2 streaming ops
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 15/28] media: iris: implement query_cap ioctl
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 24/28] media: iris: add check whether the video session is supported or not
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v5 9/9] drm/vs: Add VS DRM Master Driver for JH7110 SoC
  • From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: (pmbus/adp1050): add support for adp1051, adp1055 and ltp8800
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 09/12] xhci: introduce xhci->lost_power flag
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• [PATCH v6 28/28] media: MAINTAINERS: add Qualcomm iris video accelerator driver
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 27/28] media: iris: enable video driver probe of SM8250 SoC
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 25/28] media: iris: implement power scaling for vpu2 and vpu3
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 23/28] media: iris: add support for drain sequence
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 21/28] media: iris: add support for dynamic resolution change
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 22/28] media: iris: handle streamoff/on from client in dynamic resolution change
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 20/28] media: iris: implement vb2 ops for buf_queue and firmware response
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 19/28] media: iris: allocate, initialize and queue internal buffers
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 17/28] media: iris: implement set properties to firmware during streamon
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 18/28] media: iris: subscribe parameters and properties to firmware for hfi_gen2
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 14/28] media: iris: implement iris v4l2_ctrl_ops
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 13/28] media: iris: implement subscribe_event and unsubscribe_event ioctls
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 02/28] media: iris: add platform driver for iris video device
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 12/28] media: iris: implement enum_fmt and enum_framesizes ioctls
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 11/28] media: iris: implement g_selection ioctl
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 09/28] media: iris: implement reqbuf ioctl with vb2_queue_setup
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 10/28] media: iris: implement s_fmt, g_fmt and try_fmt ioctls
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: ti: k3-am62l: add initial reference board file
  • From: Bryan Brattlof <bb@xxxxxx>
• [PATCH v6 04/28] media: iris: introduce iris core state management with shared queues
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 08/28] media: iris: implement power management
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 07/28] media: iris: introduce host firmware interface with necessary hooks
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 06/28] media: iris: implement boot sequence of the firmware
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: ti: k3-am62l: add initial infrastructure
  • From: Bryan Brattlof <bb@xxxxxx>
• [PATCH v6 05/28] media: iris: implement video firmware load/unload
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 01/28] dt-bindings: media: Add video support for QCOM SM8550 SoC
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 03/28] media: iris: implement iris v4l2 file ops
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• [PATCH v6 00/28] Qualcomm iris video decoder driver
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: ti: k3-am62l: add initial infrastructure
  • From: Bryan Brattlof <bb@xxxxxx>
• Re: [PATCH 2/2] hwmon: (pmbus/adp1050): add support for adp1051, adp1055 and ltp8800
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: i2c: qcom-cci: Document x1e80100 compatible
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH RFC v3 3/3] riscv: KVM: Add Svukte extension support for Guest/VM
  • From: Max Hsu <max.hsu@xxxxxxxxxx>
• Re: [PATCH v30 02/30] xhci: sec-intr: add initial api to register a secondary interrupter entity
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/7] dt-bindings: display: mediatek: Add binding for MT8195 HDMI-TX v2
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: sprd: Remove unused and undocumented "constant_charge_voltage_max_microvolt" property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH RFC v3 0/3] riscv: add Svukte extension
  • From: Max Hsu <max.hsu@xxxxxxxxxx>
• [PATCH RFC v3 2/3] riscv: Add Svukte extension support
  • From: Max Hsu <max.hsu@xxxxxxxxxx>
• [PATCH RFC v3 1/3] dt-bindings: riscv: Add Svukte entry
  • From: Max Hsu <max.hsu@xxxxxxxxxx>
• [PATCH 4/5] arm64: dts: imx8mp: Add fsl,dsp-ctrl property for dsp
  • From: Daniel Baluta <daniel.baluta@xxxxxxx>
• [PATCH 5/5] arm64: dts: Add dsp rproc related mem regions
  • From: Daniel Baluta <daniel.baluta@xxxxxxx>
• [PATCH 3/5] arm64: dts: imx8mp: Add DSP clocks
  • From: Daniel Baluta <daniel.baluta@xxxxxxx>
• [PATCH 2/5] arm64: dts: imx8mp: Configure dsp node for rproc usage
  • From: Daniel Baluta <daniel.baluta@xxxxxxx>
• [PATCH 1/5] arm64: dts: imx8mp: Add mu2 root clock
  • From: Daniel Baluta <daniel.baluta@xxxxxxx>
• [PATCH 0/5] Configure imx8mp dsp node for rproc usage
  • From: Daniel Baluta <daniel.baluta@xxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH RFC 1/3] dt-bindings: riscv: Add Svukte entry
  • From: Max Hsu <max.hsu@xxxxxxxxxx>
• [PATCH net 2/2] net: ethernet: oa_tc6: fix tx skb race condition between reference pointers
  • From: Parthiban Veerasooran <parthiban.veerasooran@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: (pmbus/adp1050): add support for adp1051, adp1055 and ltp8800
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC v2 3/3] riscv: KVM: Add Svukte extension support for Guest/VM
  • From: Max Hsu <max.hsu@xxxxxxxxxx>
• [PATCH net 1/2] net: ethernet: oa_tc6: fix infinite loop error when tx credits becomes 0
  • From: Parthiban Veerasooran <parthiban.veerasooran@xxxxxxxxxxxxx>
• [PATCH net 0/2] Fixes on the OPEN Alliance TC6 10BASE-T1x MAC-PHY support generic lib
  • From: Parthiban Veerasooran <parthiban.veerasooran@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: (pmbus/adp1050): add support for adp1051, adp1055 and ltp8800
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
  • From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add node for qps615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: soc: ti: pruss: Add clocks for ICSSG
  • From: "Anwar, Md Danish" <a0501179@xxxxxx>
• Re: [PATCH v2 1/5] arm64: dts: sprd: sp9860g-1h10: fix constant-charge-voltage-max-microvolt property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: sprd: Remove unused and undocumented "constant_charge_voltage_max_microvolt" property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 13/16] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs
  • From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
• Re: [PATCH v5 16/16] net: stmmac: platform: Fix PTP clock rate reading
  • From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
• [PATCH v5 1/9] dt-bindings: display: bindings for starfive,JH7110 display pipeline
  • From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] arm64: dts: ti: k3-am64-main: Switch ICSSG clock to core clock
  • From: Wadim Egorov <w.egorov@xxxxxxxxx>
• [PATCH v1 7/7] drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 6/7] drm/mediatek: mtk_hdmi: Split driver and add common probe function
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 4/7] drm/mediatek: mtk_hdmi_ddc: Switch to register as module_platform_driver
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 5/7] drm/mediatek: hdmi: Use regmap instead of iomem for main registers
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 3/7] drm/mediatek: mtk_cec: Switch to register as module_platform_driver
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 2/7] dt-bindings: display: mediatek: Add binding for MT8195 HDMI-TX v2
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 1/7] dt-bindings: display: mediatek: Add binding for HDMIv2 DDC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 0/7] drm/mediatek: Add support for HDMIv2 and DDCv2 IPs
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 6/6] drm/mediatek: Add support for MT8195 Digital Parallel Interface
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 5/6] drm/mediatek: mtk_dpi: Add checks for reg_h_fre_con existence
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 4/6] drm/mediatek: mtk_dpi: Move pixel clock setting flow to function
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 3/6] drm/mediatek: mtk_dpi: Use an array for pixclk factor calculation
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 2/6] drm/mediatek: mtk_dpi: Add support for Pattern Generator in debugfs
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 1/6] dt-bindings: display: mediatek: dpi: Add MT8195 and MT8188 compat
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v1 0/6] drm/mediatek: dpi: Add support for MT8195/8188 and Pattern Generator
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v30 00/30] Introduce QC USB SND audio offloading support
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v2 10/11] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v30 15/30] ASoC: usb: Fetch ASoC card and pcm device information
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH] arm64: dts: sprd: Remove unused and undocumented "constant_charge_voltage_max_microvolt" property
  • From: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/3] spi: cadence-quadspi: Add support for device reset
  • From: Srikanth Boyapally <srikanth.boyapally@xxxxxxx>
• Re: [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v30 26/30] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v3] arm64: dts: qcom: qdu/qru1000-idp: Fix the voltage setting
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: sprd: Remove unused and undocumented "constant_charge_voltage_max_microvolt" property
  • From: Stanislav Jakubek <stano.jakubek@xxxxxxxxx>
• Re: [PATCH v30 28/30] ALSA: usb-audio: Add USB offload route kcontrol
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH 3/3] spi: cadence-quadspi: Support for device reset via OSPI controller
  • From: Srikanth Boyapally <srikanth.boyapally@xxxxxxx>
• [PATCH 2/3] spi: cadence-quadspi: Use quirks to set dma_set_mask instead of compatible string for 64-bit DMA support
  • From: Srikanth Boyapally <srikanth.boyapally@xxxxxxx>
• [PATCH 1/3] dt-bindings: qspi: cdns,qspi-nor: Add compatible string to support OSPI controller on Versal Gen2 platform
  • From: Srikanth Boyapally <srikanth.boyapally@xxxxxxx>
• Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v5 00/16] Add support for Synopsis DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 00/16] Add support for Synopsis DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
  • From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: reset: mediatek: Add mt8188 SMI reset control binding
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: clock: qcom: Add second power-domain to CAMCC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 5/5] arm64: dts: qcom: Add support for QCS9075 Ride & Ride-r3
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] memory: mtk-smi: mt8188: Add SMI clamp function
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/5] arm64: dts: qcom: Add support for QCS9075 RB8
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v30 07/30] ALSA: Add USB audio device jack type
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v2 11/11] arm64: qcom: dts: sm8650: add interconnect and opp-peak-kBps for GPU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 10/11] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 09/11] drm/msm: adreno: enable GMU bandwidth for A740 and A750
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v30 01/30] usb: host: xhci: Repurpose event handler for skipping interrupter events
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 07/11] drm/msm: adreno: find bandwidth index of OPP and set it along freq index
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
  • From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
• Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: gyro: Add support for iam20380 sensor
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 1/2] arm64: dts: qcom: sa8775p: add DisplayPort device nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 0/2] Enable Display Port for Qualcomm SA8775P-ride platform
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH v3 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add node for qps615
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
  • From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
• Re: [PATCH net-next v3 4/8] net: sparx5: use phy_interface_mode_is_rgmii()
  • From: Daniel Machon <daniel.machon@xxxxxxxxxxxxx>
• [PATCH v4 1/2] arm64: dts: qcom: sa8775p: add DisplayPort device nodes
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• [PATCH v4 0/2] Enable Display Port for Qualcomm SA8775P-ride platform
  • From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v3 8/8] dt-bindings: net: sparx5: document RGMII delays
  • From: Daniel Machon <daniel.machon@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
  • From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: qcom: sa8775p-ride: update BT nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: microchip: sama5d27_wlsom1_ek: Add no-1-8-v property to sdmmc0 node
  • From: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
  • From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
• Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: pinctrl: add compatible for Allwinner A523/T527
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH 2/4] media: v4l: fwnode: Parse MiPI DisCo for C-PHY line-orders
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
  • From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: microchip: sama5d29_curiosity: Add no-1-8-v property to sdmmc0 node
  • From: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
• RE: [PATCH v3 1/8] dt-bindings: clock: imx8m-clock: support spread spectrum clocking
  • From: Peng Fan <peng.fan@xxxxxxx>
• [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: sa8775p-ride: update BT nodes
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• [PATCH v3 2/4] arm64: dts: freescale: Add i.MX91 dtsi support
  • From: Pengfei Li <pengfei.li_1@xxxxxxx>
• [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• [PATCH v1 0/4] Add qcom,product-variant properties in Qualcomm
  • From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
• [PATCH v5 4/9] drm/vs: Add Hardware Functions for VS DC8200
  • From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] drm/rockchip: Add driver for the new DSI2 controller
  • From: Daniel Semkowicz <dse@xxxxxxxxxxxxx>
• [PATCH v3 4/4] arm64: defconfig: enable i.MX91 pinctrl
  • From: Pengfei Li <pengfei.li_1@xxxxxxx>
• [PATCH v3 3/4] arm64: dts: freescale: Add i.MX91 11x11 EVK basic support
  • From: Pengfei Li <pengfei.li_1@xxxxxxx>
• [PATCH v3 0/4] Add i.MX91 platform support
  • From: Pengfei Li <pengfei.li_1@xxxxxxx>
• [PATCH v3 1/4] dt-bindings: arm: fsl: Add i.MX91 11x11 evk board
  • From: Pengfei Li <pengfei.li_1@xxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: ipq5424: Add watchdog node
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH 2/4] media: v4l: fwnode: Parse MiPI DisCo for C-PHY line-orders
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• Re: [PATCH 1/4] media: dt-bindings: Add property to describe CSI-2 C-PHY line orders
  • From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
• Re: [PATCH v3 0/2] MIPI DSI phy for rk3588
  • From: Daniel Semkowicz <dse@xxxxxxxxxxxxx>
• Re: [PATCH v6 4/7] pinctrl: s32: convert the driver into an mfd cell
  • From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
• Re: [PATCH v6 1/7] dt-bindings: mfd: add support for the NXP SIUL2 module
  • From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: usb: snps,dwc3: Add snps,filter-se0-fsls-eop quirk
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• RE: [PATCH] arm64: dts: renesas: rzg3s-smarc: Enable I2C1 and connected power monitor
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: renesas: rzg3s-smarc: Enable I2C1 and connected power monitor
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] can: flexcan: add NXP S32G2/S32G3 SoC support
  • From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
• [PATCH v14 8/8] arm64: dts: qcom: ipq9574: Remove eMMC node
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v14 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v14 7/8] arm64: dts: qcom: ipq9574: Add SPI nand support
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v14 4/8] mtd: nand: Add qpic_common API file
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v14 5/8] mtd: rawnand: qcom: use FIELD_PREP and GENMASK
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v14 3/8] mtd: rawnand: qcom: Add qcom prefix to common api
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v14 2/8] mtd: rawnand: qcom: cleanup qcom_nandc driver
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v14 1/8] spi: dt-bindings: Introduce qcom,spi-qpic-snand
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• [PATCH v14 0/8] Add QPIC SPI NAND driver
  • From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: renesas: rzg3s-smarc: Enable I2C1 and connected power monitor
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: renesas: rzg3s-smarc: Enable I2C1 and connected power monitor
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• RE: [PATCH] arm64: dts: renesas: rzg3s-smarc: Enable I2C1 and connected power monitor
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH 11/15] ARM: dts: microchip: add sama7d65 SoC DT
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 12/15] ARM: dts: microchip: add support for sama7d65_curiosity board
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 13/15] clk: at91: clk-master: increase maximum number of clocks
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 00/15] Add support for SAMA7D65
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
  • From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
• Re: [PATCH v5 2/3] mips: dts: realtek: Add SPI NAND controller
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
  • From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
• Re: [PATCH 2/3] can: flexcan: add NXP S32G2/S32G3 SoC support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 09/15] dt-bindings: clock: at91: Allow MCKs to be exported and referenced in DT
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>