Add the switch port and phys to the cameo-rtl9302c-2x-rtl8224-2xge
board.
Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---
Notes:
Changes in v6:
- New. This is needed to comply with the updated bindings. It could
possibly be split to add the ports then the PHYs. Technically the
ports are the required property that dtbs_check will complain about
but it didn't seem worth separating out the PHYs.
.../cameo-rtl9302c-2x-rtl8224-2xge.dts | 96 +++++++++++++++++++
1 file changed, 96 insertions(+)
diff --git a/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts b/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts
index 6789bf374044..28ab2442b37a 100644
--- a/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts
+++ b/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts
@@ -71,3 +71,99 @@ partition@1180000 {
};
};
};
+
+&mdio0 {
+ /* External RTL8224 */
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+};
+
+&mdio1 {
+ /* External RTL8224 */
+ phy4: ethernet-phy@0 {
+ reg = <0>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ phy5: ethernet-phy@1 {
+ reg = <1>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ phy6: ethernet-phy@2 {
+ reg = <2>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ phy7: ethernet-phy@3 {
+ reg = <3>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+};
+
+&switch0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ phy-handle = <&phy0>;
+ phy-mode = "usxgmii";
+ };
+ port@1 {
+ reg = <1>;
+ phy-handle = <&phy1>;
+ phy-mode = "usxgmii";
+ };
+ port@2 {
+ reg = <2>;
+ phy-handle = <&phy2>;
+ phy-mode = "usxgmii";
+ };
+ port@3 {
+ reg = <3>;
+ phy-handle = <&phy3>;
+ phy-mode = "usxgmii";
+ };
+ port@16 {
+ reg = <16>;
+ phy-handle = <&phy4>;
+ phy-mode = "usxgmii";
+ };
+ port@17 {
+ reg = <17>;
+ phy-handle = <&phy5>;
+ phy-mode = "usxgmii";
+ };
+ port@18 {
+ reg = <18>;
+ phy-handle = <&phy6>;
+ phy-mode = "usxgmii";
+ };
+ port@19 {
+ reg = <19>;
+ phy-handle = <&phy7>;
+ phy-mode = "usxgmii";
+ };
+ port@24{
+ reg = <24>;
+ phy-mode = "10gbase-r";
+ };
+ port@25{
+ reg = <25>;
+ phy-mode = "10gbase-r";
+ };
+ };
+};
--
2.48.1
