Linux Device Tree
[Prev Page][Next Page]
- [PATCH v6 13/28] media: iris: implement subscribe_event and unsubscribe_event ioctls
- From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
- [PATCH v6 02/28] media: iris: add platform driver for iris video device
- From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
- [PATCH v6 12/28] media: iris: implement enum_fmt and enum_framesizes ioctls
- From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
- [PATCH v6 11/28] media: iris: implement g_selection ioctl
- From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
- [PATCH v6 09/28] media: iris: implement reqbuf ioctl with vb2_queue_setup
- From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
- [PATCH v6 10/28] media: iris: implement s_fmt, g_fmt and try_fmt ioctls
- From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: ti: k3-am62l: add initial reference board file
- From: Bryan Brattlof <bb@xxxxxx>
- [PATCH v6 04/28] media: iris: introduce iris core state management with shared queues
- From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
- [PATCH v6 08/28] media: iris: implement power management
- From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
- [PATCH v6 07/28] media: iris: introduce host firmware interface with necessary hooks
- From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
- [PATCH v6 06/28] media: iris: implement boot sequence of the firmware
- From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: ti: k3-am62l: add initial infrastructure
- From: Bryan Brattlof <bb@xxxxxx>
- [PATCH v6 05/28] media: iris: implement video firmware load/unload
- From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
- [PATCH v6 01/28] dt-bindings: media: Add video support for QCOM SM8550 SoC
- From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
- [PATCH v6 03/28] media: iris: implement iris v4l2 file ops
- From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
- [PATCH v6 00/28] Qualcomm iris video decoder driver
- From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: ti: k3-am62l: add initial infrastructure
- From: Bryan Brattlof <bb@xxxxxx>
- Re: [PATCH 2/2] hwmon: (pmbus/adp1050): add support for adp1051, adp1055 and ltp8800
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: i2c: qcom-cci: Document x1e80100 compatible
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH RFC v3 3/3] riscv: KVM: Add Svukte extension support for Guest/VM
- From: Max Hsu <max.hsu@xxxxxxxxxx>
- Re: [PATCH v30 02/30] xhci: sec-intr: add initial api to register a secondary interrupter entity
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 2/7] dt-bindings: display: mediatek: Add binding for MT8195 HDMI-TX v2
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: sprd: Remove unused and undocumented "constant_charge_voltage_max_microvolt" property
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH RFC v3 0/3] riscv: add Svukte extension
- From: Max Hsu <max.hsu@xxxxxxxxxx>
- [PATCH RFC v3 2/3] riscv: Add Svukte extension support
- From: Max Hsu <max.hsu@xxxxxxxxxx>
- [PATCH RFC v3 1/3] dt-bindings: riscv: Add Svukte entry
- From: Max Hsu <max.hsu@xxxxxxxxxx>
- [PATCH 4/5] arm64: dts: imx8mp: Add fsl,dsp-ctrl property for dsp
- From: Daniel Baluta <daniel.baluta@xxxxxxx>
- [PATCH 5/5] arm64: dts: Add dsp rproc related mem regions
- From: Daniel Baluta <daniel.baluta@xxxxxxx>
- [PATCH 3/5] arm64: dts: imx8mp: Add DSP clocks
- From: Daniel Baluta <daniel.baluta@xxxxxxx>
- [PATCH 2/5] arm64: dts: imx8mp: Configure dsp node for rproc usage
- From: Daniel Baluta <daniel.baluta@xxxxxxx>
- [PATCH 1/5] arm64: dts: imx8mp: Add mu2 root clock
- From: Daniel Baluta <daniel.baluta@xxxxxxx>
- [PATCH 0/5] Configure imx8mp dsp node for rproc usage
- From: Daniel Baluta <daniel.baluta@xxxxxxx>
- [no subject]
- Re: [PATCH RFC 1/3] dt-bindings: riscv: Add Svukte entry
- From: Max Hsu <max.hsu@xxxxxxxxxx>
- [PATCH net 2/2] net: ethernet: oa_tc6: fix tx skb race condition between reference pointers
- From: Parthiban Veerasooran <parthiban.veerasooran@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] hwmon: (pmbus/adp1050): add support for adp1051, adp1055 and ltp8800
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH RFC v2 3/3] riscv: KVM: Add Svukte extension support for Guest/VM
- From: Max Hsu <max.hsu@xxxxxxxxxx>
- [PATCH net 1/2] net: ethernet: oa_tc6: fix infinite loop error when tx credits becomes 0
- From: Parthiban Veerasooran <parthiban.veerasooran@xxxxxxxxxxxxx>
- [PATCH net 0/2] Fixes on the OPEN Alliance TC6 10BASE-T1x MAC-PHY support generic lib
- From: Parthiban Veerasooran <parthiban.veerasooran@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] hwmon: (pmbus/adp1050): add support for adp1051, adp1055 and ltp8800
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add node for qps615
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: soc: ti: pruss: Add clocks for ICSSG
- From: "Anwar, Md Danish" <a0501179@xxxxxx>
- Re: [PATCH v2 1/5] arm64: dts: sprd: sp9860g-1h10: fix constant-charge-voltage-max-microvolt property
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: sprd: Remove unused and undocumented "constant_charge_voltage_max_microvolt" property
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 13/16] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs
- From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
- Re: [PATCH v5 16/16] net: stmmac: platform: Fix PTP clock rate reading
- From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
- [PATCH v5 1/9] dt-bindings: display: bindings for starfive,JH7110 display pipeline
- From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: ti: k3-am64-main: Switch ICSSG clock to core clock
- From: Wadim Egorov <w.egorov@xxxxxxxxx>
- [PATCH v1 7/7] drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v1 6/7] drm/mediatek: mtk_hdmi: Split driver and add common probe function
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v1 4/7] drm/mediatek: mtk_hdmi_ddc: Switch to register as module_platform_driver
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v1 5/7] drm/mediatek: hdmi: Use regmap instead of iomem for main registers
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v1 3/7] drm/mediatek: mtk_cec: Switch to register as module_platform_driver
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v1 2/7] dt-bindings: display: mediatek: Add binding for MT8195 HDMI-TX v2
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v1 1/7] dt-bindings: display: mediatek: Add binding for HDMIv2 DDC
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v1 0/7] drm/mediatek: Add support for HDMIv2 and DDCv2 IPs
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v1 6/6] drm/mediatek: Add support for MT8195 Digital Parallel Interface
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v1 5/6] drm/mediatek: mtk_dpi: Add checks for reg_h_fre_con existence
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v1 4/6] drm/mediatek: mtk_dpi: Move pixel clock setting flow to function
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v1 3/6] drm/mediatek: mtk_dpi: Use an array for pixclk factor calculation
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v1 2/6] drm/mediatek: mtk_dpi: Add support for Pattern Generator in debugfs
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v1 1/6] dt-bindings: display: mediatek: dpi: Add MT8195 and MT8188 compat
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v1 0/6] drm/mediatek: dpi: Add support for MT8195/8188 and Pattern Generator
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH v3 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v30 00/30] Introduce QC USB SND audio offloading support
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH v2 10/11] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v30 15/30] ASoC: usb: Fetch ASoC card and pcm device information
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH] arm64: dts: sprd: Remove unused and undocumented "constant_charge_voltage_max_microvolt" property
- From: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 0/3] spi: cadence-quadspi: Add support for device reset
- From: Srikanth Boyapally <srikanth.boyapally@xxxxxxx>
- Re: [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v30 26/30] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH v3] arm64: dts: qcom: qdu/qru1000-idp: Fix the voltage setting
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: sprd: Remove unused and undocumented "constant_charge_voltage_max_microvolt" property
- From: Stanislav Jakubek <stano.jakubek@xxxxxxxxx>
- Re: [PATCH v30 28/30] ALSA: usb-audio: Add USB offload route kcontrol
- From: Takashi Iwai <tiwai@xxxxxxx>
- [PATCH 3/3] spi: cadence-quadspi: Support for device reset via OSPI controller
- From: Srikanth Boyapally <srikanth.boyapally@xxxxxxx>
- [PATCH 2/3] spi: cadence-quadspi: Use quirks to set dma_set_mask instead of compatible string for 64-bit DMA support
- From: Srikanth Boyapally <srikanth.boyapally@xxxxxxx>
- [PATCH 1/3] dt-bindings: qspi: cdns,qspi-nor: Add compatible string to support OSPI controller on Versal Gen2 platform
- From: Srikanth Boyapally <srikanth.boyapally@xxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH v5 00/16] Add support for Synopsis DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 00/16] Add support for Synopsis DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: reset: mediatek: Add mt8188 SMI reset control binding
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
- From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
- Re: [PATCH 3/6] dt-bindings: clock: qcom: Add second power-domain to CAMCC
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 5/5] arm64: dts: qcom: Add support for QCS9075 Ride & Ride-r3
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 2/2] memory: mtk-smi: mt8188: Add SMI clamp function
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH v3 4/5] arm64: dts: qcom: Add support for QCS9075 RB8
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v30 07/30] ALSA: Add USB audio device jack type
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH v2 11/11] arm64: qcom: dts: sm8650: add interconnect and opp-peak-kBps for GPU
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 10/11] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 09/11] drm/msm: adreno: enable GMU bandwidth for A740 and A750
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v30 01/30] usb: host: xhci: Repurpose event handler for skipping interrupter events
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 07/11] drm/msm: adreno: find bandwidth index of OPP and set it along freq index
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: gyro: Add support for iam20380 sensor
- From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
- Re: [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
- From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 1/2] arm64: dts: qcom: sa8775p: add DisplayPort device nodes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 0/2] Enable Display Port for Qualcomm SA8775P-ride platform
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
- From: neil.armstrong@xxxxxxxxxx
- Re: [PATCH v3 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add node for qps615
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- Re: [PATCH net-next v3 4/8] net: sparx5: use phy_interface_mode_is_rgmii()
- From: Daniel Machon <daniel.machon@xxxxxxxxxxxxx>
- [PATCH v4 1/2] arm64: dts: qcom: sa8775p: add DisplayPort device nodes
- From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
- [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
- From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
- [PATCH v4 0/2] Enable Display Port for Qualcomm SA8775P-ride platform
- From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
- Re: [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH net-next v3 8/8] dt-bindings: net: sparx5: document RGMII delays
- From: Daniel Machon <daniel.machon@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- Re: [PATCH v2 3/4] arm64: dts: qcom: sa8775p-ride: update BT nodes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: microchip: sama5d27_wlsom1_ek: Add no-1-8-v property to sdmmc0 node
- From: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
- From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 5/7] dt-bindings: pinctrl: add compatible for Allwinner A523/T527
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [PATCH 2/4] media: v4l: fwnode: Parse MiPI DisCo for C-PHY line-orders
- From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: dts: microchip: sama5d29_curiosity: Add no-1-8-v property to sdmmc0 node
- From: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
- RE: [PATCH v3 1/8] dt-bindings: clock: imx8m-clock: support spread spectrum clocking
- From: Peng Fan <peng.fan@xxxxxxx>
- [PATCH v2 2/4] dt-bindings: bluetooth: Add qca6698 compatible string
- From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH v2 4/4] Bluetooth: hci_qca: add qcom,product-variant properties
- From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
- [PATCH v2 3/4] arm64: dts: qcom: sa8775p-ride: update BT nodes
- From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
- [PATCH v3 2/4] arm64: dts: freescale: Add i.MX91 dtsi support
- From: Pengfei Li <pengfei.li_1@xxxxxxx>
- [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
- From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
- [PATCH v1 0/4] Add qcom,product-variant properties in Qualcomm
- From: Cheng Jiang <quic_chejiang@xxxxxxxxxxx>
- [PATCH v5 4/9] drm/vs: Add Hardware Functions for VS DC8200
- From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
- Re: [PATCH 0/3] drm/rockchip: Add driver for the new DSI2 controller
- From: Daniel Semkowicz <dse@xxxxxxxxxxxxx>
- [PATCH v3 4/4] arm64: defconfig: enable i.MX91 pinctrl
- From: Pengfei Li <pengfei.li_1@xxxxxxx>
- [PATCH v3 3/4] arm64: dts: freescale: Add i.MX91 11x11 EVK basic support
- From: Pengfei Li <pengfei.li_1@xxxxxxx>
- [PATCH v3 0/4] Add i.MX91 platform support
- From: Pengfei Li <pengfei.li_1@xxxxxxx>
- [PATCH v3 1/4] dt-bindings: arm: fsl: Add i.MX91 11x11 evk board
- From: Pengfei Li <pengfei.li_1@xxxxxxx>
- Re: [PATCH 2/2] arm64: dts: qcom: ipq5424: Add watchdog node
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- Re: [PATCH 2/4] media: v4l: fwnode: Parse MiPI DisCo for C-PHY line-orders
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- Re: [PATCH 1/4] media: dt-bindings: Add property to describe CSI-2 C-PHY line orders
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- Re: [PATCH v3 0/2] MIPI DSI phy for rk3588
- From: Daniel Semkowicz <dse@xxxxxxxxxxxxx>
- Re: [PATCH v6 4/7] pinctrl: s32: convert the driver into an mfd cell
- From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
- Re: [PATCH v6 1/7] dt-bindings: mfd: add support for the NXP SIUL2 module
- From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: usb: snps,dwc3: Add snps,filter-se0-fsls-eop quirk
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- RE: [PATCH] arm64: dts: renesas: rzg3s-smarc: Enable I2C1 and connected power monitor
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: renesas: rzg3s-smarc: Enable I2C1 and connected power monitor
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] can: flexcan: add NXP S32G2/S32G3 SoC support
- From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- [PATCH v14 8/8] arm64: dts: qcom: ipq9574: Remove eMMC node
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v14 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v14 7/8] arm64: dts: qcom: ipq9574: Add SPI nand support
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v14 4/8] mtd: nand: Add qpic_common API file
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v14 5/8] mtd: rawnand: qcom: use FIELD_PREP and GENMASK
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v14 3/8] mtd: rawnand: qcom: Add qcom prefix to common api
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v14 2/8] mtd: rawnand: qcom: cleanup qcom_nandc driver
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v14 1/8] spi: dt-bindings: Introduce qcom,spi-qpic-snand
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- [PATCH v14 0/8] Add QPIC SPI NAND driver
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- Re: [PATCH] arm64: dts: renesas: rzg3s-smarc: Enable I2C1 and connected power monitor
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: renesas: rzg3s-smarc: Enable I2C1 and connected power monitor
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- RE: [PATCH] arm64: dts: renesas: rzg3s-smarc: Enable I2C1 and connected power monitor
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH 11/15] ARM: dts: microchip: add sama7d65 SoC DT
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 12/15] ARM: dts: microchip: add support for sama7d65_curiosity board
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 13/15] clk: at91: clk-master: increase maximum number of clocks
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 00/15] Add support for SAMA7D65
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
- From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- Re: [PATCH v5 2/3] mips: dts: realtek: Add SPI NAND controller
- From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- Re: [PATCH 2/3] can: flexcan: add NXP S32G2/S32G3 SoC support
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 09/15] dt-bindings: clock: at91: Allow MCKs to be exported and referenced in DT
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 00/15] Add support for SAMA7D65
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 03/15] dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 02/15] dt-bindings: mfd: atmel,sama5d2-flexcom: add microchip,sama7d65-flexcom
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 02/15] dt-bindings: mfd: atmel,sama5d2-flexcom: add microchip,sama7d65-flexcom
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/5] dt-bindings: nvmem: rockchip,otp: Add compatible for RK3576
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH] arm64: dts: renesas: rzg3s-smarc: Enable I2C1 and connected power monitor
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 6/6] arm64: dts: qcom: x1e80100: Add CAMSS block definition
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 3/6] dt-bindings: clock: qcom: Add second power-domain to CAMCC
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: i2c: qcom-cci: Document x1e80100 compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/3] dt-bindings: w1: ds2482: Add vcc-supply property
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 4/6] dt-bindings: arm: stm32: add compatible strings for Linux Automation LXA TAC gen 3
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: input: Add Nuvoton MA35D1 keypad
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v3] dt-bindings: net: can: atmel: Convert to json schema
- From: Charan Pedumuru <charan.pedumuru@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] dt-bindings: w1: ds2482: Add vcc-supply property
- From: Kryštof Černý <cleverline1mc@xxxxxxxxx>
- Re: [PATCH] docs: remove duplicate word
- From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
- Re: [PATCH v2 21/21] arm64: dts: ti: k3-j721s2: Add GPU node
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 07/21] arm64: dts: ti: k3-am62: New GPU binding details
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 05/21] drm/imagination: Use more specific compatible strings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 08/21] dt-bindings: gpu: img: Add BXS-4-64 devicetree bindings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 04/21] dt-bindings: gpu: img: Allow dma-coherent
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] docs: remove duplicate word
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH v2 03/21] dt-bindings: gpu: img: Power domain details
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 02/21] dt-bindings: gpu: img: Further constrain clocks
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 01/21] dt-bindings: gpu: img: More explicit compatible strings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 4/7] dt-bindings: clock: qcom: Add SM8750 GCC
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/5] dt-bindings: vendor-prefixes: Add TouchNetix AS
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/7] dt-bindings: clock: qcom-rpmhcc: Add RPMHCC for SM8750
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: power/supply: Add ltc4162-f/s and ltc4015
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/4] media: v4l: fwnode: Parse MiPI DisCo for C-PHY line-orders
- From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] media: dt-bindings: Add property to describe CSI-2 C-PHY line orders
- From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add node for qps615
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v8 2/3] dt-bindings: leds: Add LED1202 LED Controller
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v5 8/9] drm/vs: Add Innosilicon HDMI Support
- From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
- [PATCH v5 2/9] riscv: dts: Add display property
- From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
- [PATCH net-next v3 7/7] net: ftgmac100: remove extra newline symbols
- From: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>
- [PATCH net-next v3 6/7] net: ftgmac100: Add 64-bit DMA support for AST2700
- From: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>
- [PATCH net-next v3 5/7] net: ftgmac100: add pin strap configuration for AST2700
- From: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>
- [PATCH net-next v3 4/7] net: ftgmac100: Add support for AST2700
- From: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>
- [PATCH net-next v3 3/7] net: ftgmac100: Add reset toggling for Aspeed SOCs
- From: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>
- [PATCH net-next v3 2/7] net: faraday: Add ARM64 in FTGMAC100 for AST2700
- From: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>
- Re: [PATCH 3/5] dt-bindings: vendor-prefixes: Add TouchNetix AS
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH net-next v3 1/7] dt-bindings: net: ftgmac100: support for AST2700
- From: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>
- [PATCH net-next v3 0/7] Add Aspeed G7 FTGMAC100 support
- From: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] memory: mtk-smi: mt8188: Add SMI clamp function
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: memory: mediatek: Add SMI reset and clamp related property
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: memory: mediatek: Add SMI reset and clamp related property
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: qcom: ipq5424: Add watchdog node
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: watchdog: Document Qualcomm IPQ5424
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v2 5/5] clk: meson: add A5 clock peripherals controller driver
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH v2 4/5] clk: meson: add support for the A5 SoC PLL clock
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH v2 3/5] dt-bindings: clock: add Amlogic A5 peripherals clock controller
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH v2 2/5] dt-bindings: clock: add Amlogic A5 SCMI clock controller support
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH v2 1/5] dt-bindings: clock: add Amlogic A5 PLL clock controller
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH v2 0/5] Add A5 SoC PLLs and Peripheral clock
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH v5 6/9] drm/vs: Add CRTC Functions
- From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
- [PATCH v5 0/9] drm/verisilicon : support DC8200 and inno hdmi
- From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
- [PATCH v5 3/9] drm: bridge: inno-hdmi: add inno bridge driver.
- From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
- RE: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
- From: Ying Liu <victor.liu@xxxxxxx>
- [PATCH v2 2/2] memory: mtk-smi: mt8188: Add SMI clamp function
- From: Friday Yang <friday.yang@xxxxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: memory: mediatek: Add SMI reset and clamp related property
- From: Friday Yang <friday.yang@xxxxxxxxxxxx>
- [PATCH v2 0/2] Add SMI clamp in MediaTek SMI driver
- From: Friday Yang <friday.yang@xxxxxxxxxxxx>
- Re: [PATCH v1 03/10] media: platform: mediatek: add isp_7x seninf unit
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
- From: Pratyush Brahma <quic_pbrahma@xxxxxxxxxxx>
- [PATCH v2 2/2] reset: mediatek: Add reset controller driver for SMI
- From: Friday Yang <friday.yang@xxxxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: reset: mediatek: Add mt8188 SMI reset control binding
- From: Friday Yang <friday.yang@xxxxxxxxxxxx>
- [PATCH v2 0/2] Add MediaTek SMI reset controller driver
- From: Friday Yang <friday.yang@xxxxxxxxxxxx>
- [PATCH v5 7/9] drm/vs: Add VS Plane API
- From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
- [PATCH v5 5/9] drm/vs: Add Base API for VS Mode Configuration
- From: keith zhao <keith.zhao@xxxxxxxxxxxxxxxx>
- Re: [PATCH v1 05/10] media: platform: mediatek: add isp_7x camsys unit
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v1 06/10] media: platform: mediatek: add isp_7x utility
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- [PATCH 2/2] arm64: dts: qcom: ipq5424: Add watchdog node
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: watchdog: Document Qualcomm IPQ5424
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- [PATCH 0/2] Add watchdog support for IPQ5424
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- Re: [PATCH v1 06/10] media: platform: mediatek: add isp_7x utility
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH 2/2] hwmon: (pmbus/adp1050): add support for adp1051, adp1055 and ltp8800
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] Bluetooth: btnxpuart: implement powerup sequence.
- From: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>
- RE: ttyRe: [PATCH 1/2] dt-bindings: net: bluetooth: nxp: add support for supply and reset
- From: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx>
- [PATCH] docs: remove duplicate word
- From: Ruffalo Lavoisier <ruffalolavoisier@xxxxxxxxx>
- [PATCH 2/2] hwmon: (pmbus/adp1050): add support for adp1051, adp1055 and ltp8800
- From: Cedric Encarnacion <cedricjustine.encarnacion@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: hwmon: (pmbus/adp1050): Add bindings for adp1051, adp1055 and ltp8800
- From: Cedric Encarnacion <cedricjustine.encarnacion@xxxxxxxxxx>
- [PATCH 0/2] Add support for ADP1051/ADP1055 and LTP8800-1A/-2/-4A
- From: Cedric Encarnacion <cedricjustine.encarnacion@xxxxxxxxxx>
- RE: ttyRe: [PATCH 1/2] dt-bindings: net: bluetooth: nxp: add support for supply and reset
- From: Sherry Sun <sherry.sun@xxxxxxx>
- Re: [PATCH v5 2/3] mips: dts: realtek: Add SPI NAND controller
- From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
- 回覆: [net-next 1/3] dt-bindings: net: add support for AST2700
- From: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] ipmi: ssif_bmc: add GPIO-based alert mechanism
- From: Corey Minyard <corey@xxxxxxxxxxx>
- Re: [PATCH v1 06/10] media: platform: mediatek: add isp_7x utility
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v2 2/2] ipmi: ssif_bmc: add GPIO-based alert mechanism
- From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 15/18] dt-bindings: usb: Add ports to google,cros-ec-typec for DP altmode
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- Re: [PATCH v1 07/10] media: platform: mediatek: add isp_7x video ops
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH 1/4] media: dt-bindings: Add property to describe CSI-2 C-PHY line orders
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- [PATCH] arm64: dts: rockchip: rk3308-rock-s0: Fix sdmmc access on v1.1 boards
- From: Jonas Karlman <jonas@xxxxxxxxx>
- Re: [PATCH v4 0/2] Compute HS HCNT and LCNT based on HW parameters
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- [PATCH 5/5] Input: Add TouchNetix aXiom I2C Touchscreen support
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH 4/5] dt-bindings: input: Add TouchNetix axiom touchscreen
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH 1/5] firmware_loader: expand firmware error codes with skip error
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH 3/5] dt-bindings: vendor-prefixes: Add TouchNetix AS
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH 2/5] firmware_loader: add support to handle FW_UPLOAD_ERR_SKIP
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH 0/5] Input: Add support for TouchNetix aXiom touchscreen
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH 4/4] media: rcar-csi2: Allow specifying C-PHY line order
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH 3/4] arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH 2/4] media: v4l: fwnode: Parse MiPI DisCo for C-PHY line-orders
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH 1/4] media: dt-bindings: Add property to describe CSI-2 C-PHY line orders
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH 0/4] media: v4l: fwnode: Add support for CSI-2 C-PHY line orders
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- Re: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v5 13/16] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v13 4/7] remoteproc: Introduce release_fw optional operation
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- [PATCH 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
- From: Mikael Gonella-Bolduc via B4 Relay <devnull+mgonellabolduc.dimonoff.com@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: iio: light: Add APDS9160 binding
- From: Mikael Gonella-Bolduc via B4 Relay <devnull+mgonellabolduc.dimonoff.com@xxxxxxxxxx>
- [PATCH 0/2] Add support for Avago/Broadcom APDS9160
- From: Mikael Gonella-Bolduc via B4 Relay <devnull+mgonellabolduc.dimonoff.com@xxxxxxxxxx>
- Re: [PATCH v3 2/4] riscv: export __cpuid_to_hartid_map
- From: Atish Patra <atishp@xxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
- From: Kuldeep Singh <quic_kuldsing@xxxxxxxxxxx>
- Re: [PATCH net-next v3 4/8] net: sparx5: use phy_interface_mode_is_rgmii()
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] can: flexcan: add NXP S32G2/S32G3 SoC support
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
- From: Frank Li <Frank.li@xxxxxxx>
- [PATCH v8 5/7] dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v8 7/7] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v8 6/7] PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext()
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v8 4/7] PCI: imx6: Remove cpu_addr_fixup()
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v8 3/7] PCI: dwc: ep: Add bus_addr_base for outbound window
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v8 2/7] PCI: dwc: Use devicetree 'ranges' property to get rid of cpu_addr_fixup() callback
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v8 1/7] of: address: Add parent_bus_addr to struct of_pci_range
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v8 0/7] PCI: dwc: opitimaze RC Host/EP pci_fixup_addr()
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v7 2/3] dt-bindings: display: adi,adv7533: Drop single lane support
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: regulator: qcom-labibb-regulator: document the pmi8950 labibb regulator
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: ti: k3-j784s4: use ti,j7200-padconf compatible
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- Re: [net-next 1/3] dt-bindings: net: add support for AST2700
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 15/15] clk: at91: sama7d65: add sama7d65 pmc driver
- From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
- [PATCH v2 09/11] drm/msm: adreno: enable GMU bandwidth for A740 and A750
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v6 2/3] dt-bindings: display: adi,adv7533: Drop single lane support
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v2 19/21] drm/imagination: Add device_memory_force_cpu_cached override
- From: Andrew Davis <afd@xxxxxx>
- [PATCH v2 07/11] drm/msm: adreno: find bandwidth index of OPP and set it along freq index
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: net: qcom,ethqos: revise description for qcs615
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH net-next v3 8/8] dt-bindings: net: sparx5: document RGMII delays
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [net-next 2/3] net: mdio: aspeed: Add support for AST2700
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v2 10/11] arm64: qcom: dts: sm8550: add interconnect and opp-peak-kBps for GPU
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH] of: property: fw_devlink: Do not use interrupt-parent directly
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 1/9] dt-bindings: misc: Describe TI FPC202 dual port controller
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v13 4/7] remoteproc: Introduce release_fw optional operation
- From: Arnaud POULIQUEN <arnaud.pouliquen@xxxxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: net: nuvoton: Add schema for Nuvoton MA35 family GMAC
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 5/5] arm64: dts: qcom: Add support for QCS9075 Ride & Ride-r3
- From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
- [PATCH v5 7/8] dt-bindings: trivial-devices: Add Injoinic IP5306
- From: Csókás, Bence <csokas.bence@xxxxxxxxx>
- [PATCH v2 02/11] drm/msm: adreno: rename quirks that are features
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: power: supply: bq24190: Add BQ24297 compatible
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- [PATCH v2 06/11] drm/msm: adreno: dynamically generate GMU bw table
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v2 11/11] arm64: qcom: dts: sm8650: add interconnect and opp-peak-kBps for GPU
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v3 4/5] arm64: dts: qcom: Add support for QCS9075 RB8
- From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
- [PATCH v2 08/11] drm/msm: adreno: request for maximum bus bandwidth usage
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v2 04/11] drm/msm: adreno: add GMU_BW_VOTE feature flag
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v2 03/11] drm/msm: adreno: move features bits in a separate variable
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v2 01/11] opp: core: implement dev_pm_opp_get_bw
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH v2 00/11] drm/msm: adreno: add support for DDR bandwidth scaling via GMU
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- [PATCH] arm64: dts: marvell: cn9131-cf-solidwan: fix cp1 comphy links
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- Re: [PATCH v30 00/30] Introduce QC USB SND audio offloading support
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH v3 2/5] soc: qcom: socinfo: add QCS9075 SoC ID
- From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
- [PATCH v3 5/5] arm64: dts: qcom: Add support for QCS9075 Ride & Ride-r3
- From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
- [PATCH v3 1/5] dt-bindings: arm: qcom,ids: add SoC ID for QCS9075
- From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
- [PATCH v3 3/5] dt-bindings: arm: qcom: Document rb8/ride/ride-r3 on QCS9075
- From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
- [PATCH v3 0/5] arm64: qcom: Add support for QCS9075 boards
- From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
- Re: [PATCH v5 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: ti: k3-am62l: add initial infrastructure
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: PCI: snps,dw-pcie: Drop "#interrupt-cells" from example
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: arm: rockchip: Add Firefly ROC-RK3576-PC binding
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v2 4/5] arm64: dts: qcom: Add support for QCS9075 RB8
- From: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
- Re: [PATCH] dt-bindings: PCI: snps,dw-pcie: Drop "#interrupt-cells" from example
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 12/16] net: dwmac-sti: Use helper rgmii_clock
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 16/16] net: stmmac: platform: Fix PTP clock rate reading
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/5] dt-bindings: display: vop2: Add optional PLL clock properties
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: remoteproc: Consolidate SC8180X and SM8150 PAS files
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: usb: qcom,dwc3: Make ss_phy_irq optional for X1E80100
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: PCI: snps,dw-pcie: Drop "#interrupt-cells" from example
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v5 07/16] spi: dt-bindings: axi-spi-engine: add SPI offload properties
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v5 06/16] net: dwmac-imx: Use helper rgmii_clock
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/4] dt-bindings: iio: accel: fxls8962af: add compatible string 'nxp,fxls8974cf'
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: iio: accel: fxls8962af: add compatible string 'nxp,fxls8967af'
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v5 14/16] dt-bindings: iio: adc: adi,ad4695: add SPI offload properties
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 07/16] spi: dt-bindings: axi-spi-engine: add SPI offload properties
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 11/16] net: xgene_enet: Use helper rgmii_clock
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 10/16] net: macb: Use helper rgmii_clock
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH] of: property: fw_devlink: Do not use interrupt-parent directly
- From: Samuel Holland <samuel.holland@xxxxxxxxxx>
- Re: [PATCH v5 09/16] net: dwmac-starfive: Use helper rgmii_clock
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 08/16] net: dwmac-rk: Use helper rgmii_clock
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- [PATCH 10/15] ARM: configs: at91: sama7: add new SoC config
- From: <Ryan.Wanner@xxxxxxxxxxxxx>
- Re: [PATCH v5 07/16] net: dwmac-intel-plat: Use helper rgmii_clock
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 04/16] net: phy: Add helper for mapping RGMII link speed to clock rate
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 03/16] spi: dt-bindings: add trigger-source.yaml
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 05/16] net: dwmac-dwc-qos-eth: Use helper rgmii_clock
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- [PATCH 12/15] ARM: dts: microchip: add support for sama7d65_curiosity board
- From: <Ryan.Wanner@xxxxxxxxxxxxx>
- [PATCH 15/15] clk: at91: sama7d65: add sama7d65 pmc driver
- From: <Ryan.Wanner@xxxxxxxxxxxxx>
- [PATCH 14/15] clk: at91: clk-sam9x60-pll: increase maximum amount of plls
- From: <Ryan.Wanner@xxxxxxxxxxxxx>
- [PATCH 13/15] clk: at91: clk-master: increase maximum number of clocks
- From: <Ryan.Wanner@xxxxxxxxxxxxx>
- [PATCH 11/15] ARM: dts: microchip: add sama7d65 SoC DT
- From: <Ryan.Wanner@xxxxxxxxxxxxx>
- [PATCH 09/15] dt-bindings: clock: at91: Allow MCKs to be exported and referenced in DT
- From: <Ryan.Wanner@xxxxxxxxxxxxx>
- [PATCH 08/15] dt-bindings: clock: Add SAMA7D65 PMC compatible string
- From: <Ryan.Wanner@xxxxxxxxxxxxx>
- [PATCH 07/15] dt-bindings: clocks: atmel,at91sam9x5-sckc: add sama7d65
- From: <Ryan.Wanner@xxxxxxxxxxxxx>
- [PATCH 06/15] dt-bindings: pinctrl: at91-pio4: add microchip,sama7d65-pinctrl
- From: <Ryan.Wanner@xxxxxxxxxxxxx>
- [PATCH 05/15] dt-bindings: serial: atmel,at91-usart: add microchip,sama7d65-usart
- From: <Ryan.Wanner@xxxxxxxxxxxxx>
- [PATCH 04/15] dt-bindings: mmc: atmel,sama5d2-sdhci: add microchip,sama7d65-sdhci
- From: <Ryan.Wanner@xxxxxxxxxxxxx>
- [PATCH 03/15] dt-bindings: atmel-sysreg: add sama7d65 RAM and PIT
- From: <Ryan.Wanner@xxxxxxxxxxxxx>
- [PATCH 02/15] dt-bindings: mfd: atmel,sama5d2-flexcom: add microchip,sama7d65-flexcom
- From: <Ryan.Wanner@xxxxxxxxxxxxx>
- [PATCH 01/15] dt-bindings: ARM: at91: Document Microchip SAMA7D65 Curiosity
- From: <Ryan.Wanner@xxxxxxxxxxxxx>
- [PATCH 00/15] Add support for SAMA7D65
- From: <Ryan.Wanner@xxxxxxxxxxxxx>
- Re: [PATCH v5 00/16] Add support for Synopsis DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 04/16] spi: dt-bindings: add PWM SPI offload trigger
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 02/16] net: driver: stmmac: Extend CSR calc support
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 03/16] net: stmmac: Fix clock rate variables size
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/5] dt-bindings: mips: mips-cm: Add property for broken HCI information
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/5] dt-bindings: mips: Document mti,mips-cm
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: regulator: qcom-labibb-regulator: document the pmi8950 labibb regulator
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v5 13/16] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v5 1/6] dt-bindings: Add Blaize vendor prefix
- From: Nikolaos Pasaloukos <nikolaos.pasaloukos@xxxxxxxxxx>
- Re: [PATCH v3 6/8] arm64: dts: renesas: rzg3s-smarc-switches: Add a header to describe different switches
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] of: property: fw_devlink: Do not use interrupt-parent directly
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 2/2] ARM: dts: microchip: sama5d27_wlsom1_ek: Add no-1-8-v property to sdmmc0 node
- From: <cristian.birsan@xxxxxxxxxxxxx>
- [PATCH 0/2] ARM: dts: microchip: Add no-1-8-v property to sdmmc0 node
- From: <cristian.birsan@xxxxxxxxxxxxx>
- [PATCH 1/2] ARM: dts: microchip: sama5d29_curiosity: Add no-1-8-v property to sdmmc0 node
- From: <cristian.birsan@xxxxxxxxxxxxx>
- Re: [PATCH v11 3/3] ARM: dts: mxs: Add descriptions for imx287 based btt3-[012] devices
- From: Lukasz Majewski <lukma@xxxxxxx>
- Re: [PATCH v5 1/6] dt-bindings: Add Blaize vendor prefix
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [RFC PATCH] soc: imx: Add AHB to IP Bridge configuration driver
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH v5 1/6] dt-bindings: Add Blaize vendor prefix
- From: Nikolaos Pasaloukos <nikolaos.pasaloukos@xxxxxxxxxx>
- Re: [PATCH 6/6] arm64: dts: qcom: x1e80100: Add CAMSS block definition
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH 3/6] dt-bindings: clock: qcom: Add second power-domain to CAMCC
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH v5 12/16] net: dwmac-sti: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v5 10/16] net: macb: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v5 13/16] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v5 00/16] Add support for Synopsis DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v5 11/16] net: xgene_enet: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v5 16/16] net: stmmac: platform: Fix PTP clock rate reading
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v5 15/16] MAINTAINERS: Add Jan Petrous as the NXP S32G/R DWMAC driver maintainer
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v5 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v5 09/16] net: dwmac-starfive: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v5 02/16] net: driver: stmmac: Extend CSR calc support
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v5 06/16] net: dwmac-imx: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v5 08/16] net: dwmac-rk: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v5 07/16] net: dwmac-intel-plat: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v5 05/16] net: dwmac-dwc-qos-eth: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v5 04/16] net: phy: Add helper for mapping RGMII link speed to clock rate
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v5 03/16] net: stmmac: Fix clock rate variables size
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v5 01/16] net: driver: stmmac: Fix CSR divider comment
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- Re: [RFC PATCH] soc: imx: Add AHB to IP Bridge configuration driver
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v4 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver
- From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: arm: samsung: Add compatible for Samsung Galaxy S20 FE (SM-G780F)
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 1/2] hwmon: (sht3x) add devicetree support
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 3/6] dt-bindings: clock: qcom: Add second power-domain to CAMCC
- From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
- Re: [PATCH 6/6] arm64: dts: qcom: x1e80100: Add CAMSS block definition
- From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
- Re: [PATCH 5/6] arm64: dts: qcom: x1e80100: Add CCI definitions
- From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
- Re: [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
- From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: Introduce ADS7138
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: trivial-devices: add sensirion,sht3x
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 2/2] dt-bindings: trivial-devices: add sensirion,sht3x
- From: JuenKit Yip <hunterteaegg@xxxxxxx>
- Re: [PATCH 1/2] hwmon: (sht3x) add devicetree support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 3/4] dt-bindings: mailbox: add binding for Microchip IPC mailbox controller
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 1/2] hwmon: (sht3x) add devicetree support
- From: JuenKit Yip <hunterteaegg@xxxxxxx>
- Re: [PATCH v3 1/8] dt-bindings: clock: imx8m-clock: support spread spectrum clocking
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 5/7] dt-bindings: iio: bosch,bme680: Add supply properties
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 2/6] dt-bindings: mfd: mediatek: mt6397: Add bindings for MT6328
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: arm: fsl: Add i.MX91 11x11 evk board
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 1/8] dt-bindings: clock: imx8m-clock: support spread spectrum clocking
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/5] clk: rockchip: rk3576: define clk_otp_phy_g
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH v6 4/7] pinctrl: s32: convert the driver into an mfd cell
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 1/6] dt-bindings: Add Blaize vendor prefix
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/5] clk: rockchip: rk3576: define clk_otp_phy_g
- From: "Diederik de Haas" <didi.debian@xxxxxxxxx>
- Re: [PATCH v2 2/5] iommu: sun50i: allocate page tables from below 4 GiB
- From: Parthiban <parthiban@xxxxxxxxxxx>
- [PATCH 1/5] clk: rockchip: rk3576: define clk_otp_phy_g
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- [PATCH 0/5] RK3576 OTP support
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- [PATCH 5/5] arm64: dts: rockchip: add rk3576 otp node
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- [PATCH 4/5] nvmem: rockchip-otp: add rk3576 variant data
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: 回覆: [net-next 0/3] Add Aspeed G7 MDIO support
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v5 1/6] dt-bindings: Add Blaize vendor prefix
- From: Nikolaos Pasaloukos <nikolaos.pasaloukos@xxxxxxxxxx>
- Re: [PATCH v6 1/7] dt-bindings: mfd: add support for the NXP SIUL2 module
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 3/6] dt-bindings: clock: qcom: Add second power-domain to CAMCC
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH v5 2/3] dt-bindings: display: adi,adv7533: Drop single lane support
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH 6/6] arm64: dts: qcom: x1e80100: Add CAMSS block definition
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH 3/5] dt-bindings: nvmem: rockchip,otp: Add compatible for RK3576
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- [PATCH 2/5] nvmem: rockchip-otp: Move read-offset into variant-data
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- [PATCH 2/6] dt-bindings: media: Add qcom,x1e80100-camss binding
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH 1/6] dt-bindings: i2c: qcom-cci: Document x1e80100 compatible
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH 4/6] arm64: dts: qcom: x1e80100: Add CAMCC block definition
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH 5/6] arm64: dts: qcom: x1e80100: Add CCI definitions
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH v3 3/4] iio: adc: ad4000: Use device specific timing for SPI transfers
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH 0/6] Add dt-bindings and dtsi changes for CAMSS on x1e80100 silicon
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v5 5/6] arm64: defconfig: Enable Blaize BLZP1600 platform
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [RFC PATCH] soc: imx: Add AHB to IP Bridge configuration driver
- From: Daniel Baluta <daniel.baluta@xxxxxxx>
- Re: [PATCH v5 1/6] dt-bindings: Add Blaize vendor prefix
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 2/6] dt-bindings: arm: blaize: Add Blaize BLZP1600 SoC
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 3/6] arm64: Add Blaize BLZP1600 SoC family
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 4/6] arm64: Add initial support for Blaize BLZP1600 CB2
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 0/6] Add support for Blaize BLZP1600 SoC
- From: Nikolaos Pasaloukos <nikolaos.pasaloukos@xxxxxxxxxx>
- [PATCH v3 4/4] iio: adc: ad4000: Add support for PulSAR devices
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v3 2/4] iio: adc: ad4000: Add timestamp channel
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v3 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v3 0/4] Timestamp and PulSAR support for ad4000
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: net: bluetooth: nxp: add support for supply and reset
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [net-next PATCH v7 0/4] net: dsa: Add Airoha AN8855 support
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH v5 01/17] dt-bindings: net: wireless: cc33xx: Add ti,cc33xx.yaml
- From: "Nemanov, Michael" <michael.nemanov@xxxxxx>
- [PATCH v3] arm64: qcom: qcs8300: Add ADSP and CDSP0 fastrpc nodes
- From: Ling Xu <quic_lxu5@xxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: at24: add ST M24256E Additional Write lockable page support
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH net-next v2 8/8] dt-bindings: net: sparx5: document RGMII MAC delays
- From: Daniel Machon <daniel.machon@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
- [PATCH 6/6] ARM: dts: stm32: lxa-tac: Add support for generation 3 devices
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 5/6] ARM: dts: stm32: lxa-tac: move adc and gpio{e,g} to gen{1,2} boards
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 3/6] ARM: dts: stm32: lxa-tac: adjust USB gadget fifo sizes for multi function
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 4/6] dt-bindings: arm: stm32: add compatible strings for Linux Automation LXA TAC gen 3
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 2/6] ARM: dts: stm32: lxa-tac: extend the alias table
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 1/6] ARM: dts: stm32: lxa-tac: disable the real time clock
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH 0/6] ARM: dts: stm32: lxa-tac: fix gen{1,2} boards and add gen3 board
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] ipmi: ssif_bmc: add GPIO-based alert mechanism
- From: Corey Minyard <corey@xxxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
- Re: [PATCH v2 3/4] iio: adc: ad4000: Use device specific timing for SPI transfers
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- Re: [PATCH 0/3] Add standalone ethernet MAC entries for qcs615
- From: Paolo Abeni <pabeni@xxxxxxxxxx>
- 回覆: [net-next v2 1/7] dt-bindings: net: ftgmac100: support for AST2700
- From: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>
- Re: [net-next PATCH v7 0/4] net: dsa: Add Airoha AN8855 support
- From: Paolo Abeni <pabeni@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: at24: add ST M24256E Additional Write lockable page support
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH v2] dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml
- From: Xu Yang <xu.yang_2@xxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: ti: k3-am64-main: Switch ICSSG clock to core clock
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: soc: ti: pruss: Add clocks for ICSSG
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- Re: [PATCH v6 2/3] coresight: Add support to get static id for system trace sources
- From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
- [PATCH v2 1/3] dt-bindings: watchdog: Document Qualcomm QCS8300 watchdog
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- [PATCH v2 0/3] Enable Watchdog on QCS8300
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- [PATCH v2 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- [PATCH v2 2/3] arm64: dts: qcom: qcs8300: Add watchdog node
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: qcom: Enable Primary USB controller on QCS615 Ride
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- Re: [PATCH v7 2/7] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: phy: imx8mq-usb: optionally refer to usb-switch.yaml
- From: Xu Yang <xu.yang_2@xxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: qcs615-ride: Enable ethernet node
- From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
- RE: [PATCH 1/2] dt-bindings: net: bluetooth: nxp: add support for supply and reset
- From: Sherry Sun <sherry.sun@xxxxxxx>
- [PATCH v2 3/3] arm64: dts: rockchip: convert to use shared .dtsi for Radxa ROCK 5A
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v2 2/3] arm64: dts: rockchip: split dts into sharable dtsi and board-specific dts for Radxa ROCK 5C
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v2 1/3] arm64: dts: rockchip: add "dcin" regulator for Radxa ROCK 5C
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- Re: [PATCH v3 3/3] net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family
- From: Joey Lu <a0987203069@xxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- Re: [PATCH v6 4/7] pinctrl: s32: convert the driver into an mfd cell
- From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
- [PATCH v3 02/11] arm64: dts: rockchip: add cd-gpios for sdmmc for Radxa ROCK 5C
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v3 04/11] arm64: dts: rockchip: fix proparties for pmic regulators for Radxa ROCK 5C
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v3 09/11] arm64: dts: rockchip: sort nodes for Radxa ROCK 5C
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v3 06/11] arm64: dts: rockchip: fix property for pwm-fan for Radxa ROCK 5C
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v3 07/11] arm64: dts: rockchip: rename regulator for pcie2x1l2 for Radxa ROCK 5C
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v3 01/11] arm64: dts: rockchip: add properties for pcie2x1l2 for Radxa ROCK 5C
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v3 11/11] arm64: dts: rockchip: separate pinctrl for vcc_5v0 for Radxa ROCK 5C
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v3 08/11] arm64: dts: rockchip: remove RTC and related node for Radxa ROCK 5C
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v3 10/11] arm64: dts: rockchip: fix pmic dcdc-reg7 regulator-name for Radxa ROCK 5C
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v3 03/11] arm64: dts: rockchip: fix pmic dcdc-reg10 label for Radxa ROCK 5C
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v3 05/11] arm64: dts: rockchip: add property for usbdp_phy0 for Radxa ROCK 5C
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- Re: [PATCH V4 1/3] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- Re: [PATCH v6 1/7] dt-bindings: mfd: add support for the NXP SIUL2 module
- From: Andrei Stefanescu <andrei.stefanescu@xxxxxxxxxxx>
- Re: [PATCH v1 06/10] media: platform: mediatek: add isp_7x utility
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
- Re: [PATCH v6 4/7] pinctrl: s32: convert the driver into an mfd cell
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH] arm64: dts: qcom: qcs9100: Update memory map for QCS9100 Ride and QCS9100 Ride Rev3
- From: Pratyush Brahma <quic_pbrahma@xxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: qcom: Enable Primary USB controller on QCS615 Ride
- From: Song Xue <quic_songxue@xxxxxxxxxxx>
- Re: [PATCH v6 1/7] dt-bindings: mfd: add support for the NXP SIUL2 module
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 2/7] mfd: nxp-siul2: add support for NXP SIUL2
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 01/17] dt-bindings: net: wireless: cc33xx: Add ti,cc33xx.yaml
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: net: can: atmel: Convert to json schema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH V4 3/4] iio: adc: Add support for QCOM PMIC5 Gen3 ADC
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH V4 2/4] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v5 3/4] coresight: Add support for trace filtering by source
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- Re: [PATCH v1 06/10] media: platform: mediatek: add isp_7x utility
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v1 06/10] media: platform: mediatek: add isp_7x utility
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- RE: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
- From: Ying Liu <victor.liu@xxxxxxx>
- Re: [PATCH 2/2] arm64: dts: ti: k3-am62l: add initial reference board file
- From: Wadim Egorov <w.egorov@xxxxxxxxx>
- [PATCH 3/3] can: flexcan: handle S32G2/S32G3 separate interrupt lines
- From: Ciprian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- [PATCH 2/3] can: flexcan: add NXP S32G2/S32G3 SoC support
- From: Ciprian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- [PATCH 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
- From: Ciprian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- [PATCH 0/3] add FlexCAN support for S32G2/S32G3 SoCs
- From: Ciprian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- Re: [PATCH v3 0/3] add FlexCAN support for S32G2/S32G3 SoCs
- From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- Re: [PATCH 0/5] Add support for MBG Thermal monitoring device
- From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
- Re: [PATCH v13 4/7] remoteproc: Introduce release_fw optional operation
- From: Arnaud POULIQUEN <arnaud.pouliquen@xxxxxxxxxxx>
- [PATCH v3 2/3] can: flexcan: add NXP S32G2/S32G3 SoC support
- From: Ciprian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- [PATCH v3 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
- From: Ciprian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- [PATCH v3 0/3] add FlexCAN support for S32G2/S32G3 SoCs
- From: Ciprian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- Re: [PATCH 3/5] thermal: qcom: Add support for MBG Temp monitor
- From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
- Re: [PATCH 2/5] dt-bindings: thermal: qcom: Add MBG thermal monitor bindings
- From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: phy: Add ExynosAutov920 UFS PHY bindings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [net-next v2 1/7] dt-bindings: net: ftgmac100: support for AST2700
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 4/4] arm64: dts: agilex5: initial support for Arrow AXE5-Eagle
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- [PATCH v3] arm64: dts: qcom: qdu/qru1000-idp: Fix the voltage setting
- From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
- RE: [PATCH v3 1/3] dt-bindings: phy: Add ExynosAutov920 UFS PHY bindings
- From: 나소원/SOWON NA <sowon.na@xxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: soc: ti: pruss: Add clocks for ICSSG
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH v2 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v3 2/3] soc: qcom: llcc: Update configuration data for IPQ5424
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v3 3/3] arm64: dts: qcom: ipq5424: Add LLCC/system-cache-controller
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v3 1/3] dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v3 0/3] qcom: ipq5424: Add LLCC/system-cache-controller
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- Re: [PATCH v1 05/10] media: platform: mediatek: add isp_7x camsys unit
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- 回覆: [net-next 3/3] net: mdio: aspeed: Add dummy read for fire control
- From: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>
- 回覆: [net-next 3/3] net: mdio: aspeed: Add dummy read for fire control
- From: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>
- RE: [PATCH v6 02/10] PCI: imx6: Add ref clock for i.MX95 PCIe
- From: Hongxing Zhu <hongxing.zhu@xxxxxxx>
- 回覆: [net-next 0/3] Add Aspeed G7 MDIO support
- From: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>
- [PATCH 2/2] arm64: dts: qcom: Enable Primary USB controller on QCS615 Ride
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH 1/2] arm64: dts: qcom: Add support for usb node on QCS615
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH 0/2] Add DT Support for primary USB on QCS615
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- RE: [PATCH v3 1/3] dt-bindings: phy: Add ExynosAutov920 UFS PHY bindings
- From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
- Re: [PATCH v3 2/2] input: keypad: add new keypad driver for MA35D1
- From: Ming-Jen Chen <mjchen0829@xxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: input: Add Nuvoton MA35D1 keypad
- From: Ming-Jen Chen <mjchen0829@xxxxxxxxx>
- Re: [RFC v2 1/1] fpga-region: Add generic IOCTL interface for runtime FPGA programming
- From: Xu Yilun <yilun.xu@xxxxxxxxxxxxxxx>
- [PATCH v3 2/2] power/supply: Add support for ltc4162-f/s and ltc4015
- From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: power/supply: Add ltc4162-f/s and ltc4015
- From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
- [PATCH v2 1/1] riscv: dts: starfive: jh7110-pine64-star64: enable usb0 host function
- From: E Shattow <e@xxxxxxxxxxxx>
- [PATCH v2 0/1] riscv: dts: starfive: jh7110-pine64-star64: enable usb0 host function
- From: E Shattow <e@xxxxxxxxxxxx>
- Re: [PATCH net-next v3 0/8] net: lan969x: add RGMII support
- From: Jakub Kicinski <kuba@xxxxxxxxxx>
- [PATCH 2/2] input: keypad: add new keypad driver for MA35D1
- From: Ming-Jen Chen <mjchen0829@xxxxxxxxx>
- [PATCH 1/2] dt-bindings: input: Add Nuvoton MA35D1 keypad
- From: Ming-Jen Chen <mjchen0829@xxxxxxxxx>
- [PATCH v3 0/2] Add support for nuvoton ma35d1 keypad controller
- From: Ming-Jen Chen <mjchen0829@xxxxxxxxx>
- Re: [PATCH net-next] dt-bindings: net: renesas,ether: Drop undocumented "micrel,led-mode"
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- Re: [PATCH 2/3] dt-bindings: chrome: add new binding google,cros-ec-chrage-state
- From: "Sung-Chi, Li" <lschyi@xxxxxxxxxxxx>
- [PATCH v2 3/3] arm64: dts: qcom: qcs615-ride: Enable UFS node
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- [PATCH v2 2/3] arm64: dts: qcom: qcs615: add UFS node
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- [PATCH v2 1/3] dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- [PATCH v2 0/3] Enable UFS on QCS615
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- Re: [PATCH v4 03/13] drm/bridge: fsl-ldb: Use clk_round_rate() to validate "ldb" clock rate
- From: Liu Ying <victor.liu@xxxxxxx>
- Re: [PATCH v2 5/7] clk: qcom: Add support for GCC clock controller on SM8750
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 3/3] arm64: dts: imx93: Use IMX93_CLK_SPDIF_IPG as SPDIF IPG clock
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- [PATCH v3 2/3] clk: imx93: Add IMX93_CLK_SPDIF_IPG clock
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- [PATCH v3 1/3] dt-bindings: clock: imx93: Add SPDIF IPG clk
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- [PATCH v3 0/3] clk: imx93: Add IMX93_CLK_SPDIF_IPG clock
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- Re: [PATCH v2 2/7] clk: qcom: rpmh: Add support for SM8750 rpmh clocks
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [net-next 3/3] net: mdio: aspeed: Add dummy read for fire control
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [net-next 0/3] Add Aspeed G7 MDIO support
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v1 03/10] media: platform: mediatek: add isp_7x seninf unit
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v3 3/3] net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v2 2/2] ipmi: ssif_bmc: add GPIO-based alert mechanism
- From: Potin Lai <potin.lai.pt@xxxxxxxxx>
- Re: [PATCH v1 03/10] media: platform: mediatek: add isp_7x seninf unit
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- [PATCH v4 1/1] riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function
- From: E Shattow <e@xxxxxxxxxxxx>
- [PATCH v4 0/1] riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function
- From: E Shattow <e@xxxxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: qcs615-ride: Enable ethernet node
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v7 2/7] Revert "clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate"
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v5 2/2] phy: Realtek Otto SerDes driver
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: phy: add realtek,rtl8380m-serdes
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH net-next v2 8/8] dt-bindings: net: sparx5: document RGMII MAC delays
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v3 0/6] i2c: nomadik: support >=1MHz & Mobileye EyeQ6H platform
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH 05/14] dt-bindings: i2c: mv64xxx: Add Allwinner A523 compatible string
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [net-next 3/3] net: mdio: aspeed: Add dummy read for fire control
- From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 05/25] pinctrl: renesas: rzg2l: Add audio clock pins
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: net: bluetooth: nxp: add support for supply and reset
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/6] arm64: dts: qcom: Add pmd8028 and pmih0108 PMICs
- From: Melody Olvera <quic_molvera@xxxxxxxxxxx>
- Re: [PATCH v2 1/6] dt-bindings: arm: qcom: Document sm8750 SoC and boards
- From: Melody Olvera <quic_molvera@xxxxxxxxxxx>
- [GIT PULL] Devicetree updates for v6.13
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 2/3] dt-bindings: chrome: add new binding google,cros-ec-chrage-state
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH net-next] dt-bindings: net: renesas,ether: Drop undocumented "micrel,led-mode"
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v7 3/3] leds: Add LED1202 I2C driver
- From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
- Re: [PATCH v2 3/4] iio: adc: ad4000: Use device specific timing for SPI transfers
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v2 3/4] arm64: dts: freescale: Add i.MX91 11x11 EVK basic support
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v8 3/6] firmware: psci: Read and use vendor reset types
- From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
- Re: [PATCH v2 5/7] clk: qcom: Add support for GCC clock controller on SM8750
- From: Melody Olvera <quic_molvera@xxxxxxxxxxx>
- Re: [PATCH v2 2/4] arm64: dts: freescale: Add i.MX91 dtsi support
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v6 3/5] firmware: psci: Read and use vendor reset types
- From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: arm: fsl: Add i.MX91 11x11 evk board
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v2 2/7] clk: qcom: rpmh: Add support for SM8750 rpmh clocks
- From: Melody Olvera <quic_molvera@xxxxxxxxxxx>
- [PATCH v2 4/4] iio: adc: ad4000: Add support for PulSAR devices
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v2 3/4] iio: adc: ad4000: Use device specific timing for SPI transfers
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v2 2/4] iio: adc: ad4000: Add timestamp channel
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v2 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v2 0/4] Timestamp and PulSAR support for ad4000
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- Re: [net-next PATCH v7 0/4] net: dsa: Add Airoha AN8855 support
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- Re: [PATCH v2 0/4] iio: adc: ad7124: Make it work on de10-nano
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: ti: k3-am62l: add initial reference board file
- From: Andrew Davis <afd@xxxxxx>
- Re: [PATCH 1/2] arm64: dts: ti: k3-am62l: add initial infrastructure
- From: Andrew Davis <afd@xxxxxx>
- Re: [PATCH v2 2/2] interconnect: qcom: Add interconnect provider driver for SM8750
- From: Melody Olvera <quic_molvera@xxxxxxxxxxx>
- Re: [PATCH v13 4/7] remoteproc: Introduce release_fw optional operation
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v10] pwm: airoha: Add support for EN7581 SoC
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: imx8-ss-audio: add fallback compatible string fsl,imx6ull-esai for esai
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v5 2/2] serial: fsl_linflexuart: add clock management
- From: Ciprian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- [PATCH v5 1/2] dt-bindings: serial: fsl-linflexuart: add clock definitions
- From: Ciprian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- [PATCH v5 0/2] add NXP LINFlexD UART clock support for S32G2/S32G3
- From: Ciprian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- [PATCH v8 1/3] Documentation:leds: Add leds-st1202.rst
- From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
- [PATCH v8 3/3] leds: Add LED1202 I2C driver
- From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
- [PATCH v2] ARM: dts: imxrt1050: Fix clocks for mmc
- From: Jesse Taube <mr.bossman075@xxxxxxxxx>
- Re: [PATCH can-next v5 2/2] can: tcan4x5x: add option for selecting nWKRQ voltage
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH v6 3/5] firmware: psci: Read and use vendor reset types
- From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
- [PATCH v8 2/3] dt-bindings: leds: Add LED1202 LED Controller
- From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
- [PATCH v8 0/3] Add LED1202 LED Controller
- From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
- Re: [PATCH can-next v5 2/2] can: tcan4x5x: add option for selecting nWKRQ voltage
- From: Sean Nyekjaer <sean@xxxxxxxxxx>
- [PATCH v7 3/3] leds: Add LED1202 I2C driver
- From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
- [PATCH v7 0/3] Add LED1202 LED Controller
- From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
- [PATCH v7 2/3] dt-bindings: leds: Add LED1202 LED Controller
- From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
- [PATCH v7 1/3] Documentation:leds: Add leds-st1202.rst
- From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
- Re: [net-next PATCH v7 0/4] net: dsa: Add Airoha AN8855 support
- From: Vladimir Oltean <olteanv@xxxxxxxxx>
- Re: [PATCH RFC 6/8] drm/msm: adreno: enable GMU bandwidth for A740 and A750
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 12/15] dt-bindings: media: add the stm32mp25 compatible of DCMIPP
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- [PATCH v3 13/15] media: stm32: dcmipp: add core support for the stm32mp25
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- [PATCH v3 09/15] media: stm32: dcmipp: add 1X16 RGB / YUV formats support
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- Re: [PATCH v10] pwm: airoha: Add support for EN7581 SoC
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: soc: ti: pruss: Add clocks for ICSSG
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- [PATCH v3 11/15] media: stm32: dcmipp: fill media ctl hw_revision field
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: Introduce ADS7138
- From: "Sperling, Tobias" <Tobias.Sperling@xxxxxxxxxxx>
- Re: [PATCH RFC 6/8] drm/msm: adreno: enable GMU bandwidth for A740 and A750
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v2] arm64: qcom: qcs8300: Add ADSP and CDSP0 fastrpc nodes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 07/15] media: stm32: dcmipp: add support for csi input into dcmipp-input
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- [PATCH v3 10/15] media: stm32: dcmipp: avoid duplicated format on enum in bytecap
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- [PATCH v3 01/15] media: stm32: dcmipp: correct dma_set_mask_and_coherent mask value
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- [PATCH v3 04/15] media: stm32: dcmipp: use v4l2_subdev_is_streaming
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- [PATCH v3 15/15] arm64: dts: st: enable imx335/csi/dcmipp pipeline on stm32mp257f-ev1
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- [PATCH v3 06/15] media: stm32: dcmipp: rename dcmipp_parallel into dcmipp_input
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- [PATCH v3 03/15] media: stm32: csi: addition of the STM32 CSI driver
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- [PATCH v3 02/15] dt-bindings: media: add description of stm32 csi
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- [PATCH v3 05/15] media: stm32: dcmipp: replace s_stream with enable/disable_streams
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- [PATCH v3 00/15] media: stm32: introduction of CSI / DCMIPP for STM32MP25
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- [PATCH v3 08/15] media: stm32: dcmipp: add bayer 10~14 bits formats
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- [PATCH v3 14/15] arm64: dts: st: add csi & dcmipp node in stm32mp25
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- Re: [PATCH v2 03/15] media: stm32: csi: addition of the STM32 CSI driver
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- [PATCH v2 11/21] drm/imagination: Rename event_mask -> status_mask
- From: Matt Coster <matt.coster@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: soc: ti: pruss: Add clocks for ICSSG
- From: Roger Quadros <rogerq@xxxxxxxxxx>
- [PATCH v2 01/21] dt-bindings: gpu: img: More explicit compatible strings
- From: Matt Coster <matt.coster@xxxxxxxxxx>
- [PATCH v2 17/21] drm/imagination: Add RISC-V firmware processor support
- From: Matt Coster <matt.coster@xxxxxxxxxx>
[Index of Archives]
[Device Tree Spec]
[Linux USB Devel]
[Video for Linux]
[Scanner Discussion]
[Linux SCSI]
[Samba]
[Yosemite News]