Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> writes:
> Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
> to fix dtbs_check warning:
>
> armada-8040-clearfog-gt-8k.dtb: sata_reset: $nodename:0: 'sata_reset' does not match '^.+-hog(-[0-9]+)?$'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
> .../arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
> index 225a54ab688d..90ae93274a16 100644
> --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
> @@ -371,25 +371,25 @@ &cp0_pcie0 {
> };
>
> &cp0_gpio2 {
> - sata_reset {
> + sata-reset-hog {
> gpio-hog;
> gpios = <1 GPIO_ACTIVE_HIGH>;
> output-high;
> };
>
> - lte_reset {
> + lte-reset-hog {
> gpio-hog;
> gpios = <2 GPIO_ACTIVE_LOW>;
> output-low;
> };
>
> - wlan_disable {
> + wlan_disable-hog {
> gpio-hog;
> gpios = <19 GPIO_ACTIVE_LOW>;
> output-low;
> };
>
> - lte_disable {
> + lte-disable-hog {
> gpio-hog;
> gpios = <21 GPIO_ACTIVE_LOW>;
> output-low;
> --
> 2.43.0
>
--
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
