Linux Device Driver Tree
[Prev Page][Next Page]
- Re: [PATCH v9 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant, (continued)
- [PATCH 0/3] arm64: dts: rockchip: add Banana Pi BPI-P2 Pro board,
Dmitry Yashin
- [PATCH v4 00/16] Add support for Synopsis DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45,
Jan Petrous via B4 Relay
- [PATCH v4 01/16] net: driver: stmmac: Fix CSR divider comment, Jan Petrous via B4 Relay
- [PATCH v4 04/16] net: phy: Add helper for mapping RGMII link speed to clock rate, Jan Petrous via B4 Relay
- [PATCH v4 02/16] net: driver: stmmac: Extend CSR calc support, Jan Petrous via B4 Relay
- [PATCH v4 03/16] net: stmmac: Fix clock rate variables size, Jan Petrous via B4 Relay
- [PATCH v4 06/16] net: dwmac-imx: Use helper rgmii_clock, Jan Petrous via B4 Relay
- [PATCH v4 05/16] net: dwmac-dwc-qos-eth: Use helper rgmii_clock, Jan Petrous via B4 Relay
- [PATCH v4 09/16] net: dwmac-starfive: Use helper rgmii_clock, Jan Petrous via B4 Relay
- [PATCH v4 11/16] net: xgene_enet: Use helper rgmii_clock, Jan Petrous via B4 Relay
- [PATCH v4 10/16] net: macb: Use helper rgmii_clock, Jan Petrous via B4 Relay
- [PATCH v4 07/16] net: dwmac-intel-plat: Use helper rgmii_clock, Jan Petrous via B4 Relay
- [PATCH v4 08/16] net: dwmac-rk: Use helper rgmii_clock, Jan Petrous via B4 Relay
- [PATCH v4 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver, Jan Petrous via B4 Relay
- [PATCH v4 13/16] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs, Jan Petrous via B4 Relay
- [PATCH v4 12/16] net: dwmac-sti: Use helper rgmii_clock, Jan Petrous via B4 Relay
- [PATCH v4 15/16] MAINTAINERS: Add Jan Petrous as the NXP S32G/R DWMAC driver maintainer, Jan Petrous via B4 Relay
- [PATCH v4 16/16] net: stmmac: dwmac-s32: Read PTP clock rate when ready, Jan Petrous via B4 Relay
- [PATCH 0/2] ASoC: fsl-esai: allow fsl,imx8qm-esai fallback to fsl,imx6ull-esai,
Frank Li
- [PATCH v6 0/7] PCI: dwc: opitimaze RC Host/EP pci_fixup_addr(),
Frank Li
- [PATCH v7 0/5] Implement vendor resets for PSCI SYSTEM_RESET2,
Elliot Berman
- [PATCH 1/2] ARM: dts: imx6sl: Fix lcdif compatible fallback,
Fabio Estevam
- [PATCH v8 00/13] MIPS: Support I6500 multi-cluster configuration,
Aleksandar Rikalo
- [PATCH v8 01/13] irqchip/mips-gic: Introduce for_each_online_cpu_gic(), Aleksandar Rikalo
- [PATCH v8 02/13] irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic(), Aleksandar Rikalo
- [PATCH v8 03/13] irqchip/mips-gic: Setup defaults in each cluster, Aleksandar Rikalo
- [PATCH v8 05/13] clocksource: mips-gic-timer: Always use cluster 0 counter as clocksource, Aleksandar Rikalo
- [PATCH v8 04/13] irqchip/mips-gic: Multi-cluster support, Aleksandar Rikalo
- [PATCH v8 06/13] clocksource: mips-gic-timer: Enable counter when CPUs start, Aleksandar Rikalo
- [PATCH v8 07/13] MIPS: pm-cps: Use per-CPU variables as per-CPU, not per-core, Aleksandar Rikalo
- [PATCH v8 08/13] MIPS: CPS: Introduce struct cluster_boot_config, Aleksandar Rikalo
- [PATCH v8 09/13] MIPS: CPS: Boot CPUs in secondary clusters, Aleksandar Rikalo
- [PATCH v8 10/13] dt-bindings: mips: cpu: Add property for broken HCI information, Aleksandar Rikalo
- [PATCH v8 11/13] MIPS: CPS: Support broken HCI for multicluster, Aleksandar Rikalo
- [PATCH v8 12/13] MIPS: mobileye: dts: eyeq6h: Enable cluster support, Aleksandar Rikalo
- [PATCH v8 13/13] irqchip: mips-gic: Handle case with cluster without CPU cores, Aleksandar Rikalo
- Re: [PATCH v8 00/13] MIPS: Support I6500 multi-cluster configuration, Jiaxun Yang
- [PATCH v5 0/9] can: m_can: Add am62 wakeup support,
Markus Schneider-Pargmann
- [PATCH v3 0/2] iio: light: veml6070: add integration time,
Javier Carrasco
- [PATCH v4] dt-bindings: power: Convert raspberrypi,bcm2835-power to Dt schema,
Karan Sanghavi
- [PATCH v2 0/4] iio: adc: ad7124: Make it work on de10-nano,
Uwe Kleine-König
- [PATCH v2 0/4] ASoC: codecs: adau1373: drop platform data,
Nuno Sa via B4 Relay
- [PATCH v3 0/6] iio: light: stk3310: support powering off during suspend,
Aren Moynihan
- [PATCH 0/3] Allow specifying an S2RAM sleep on pre-SYSTEM_SUSPEND PSCI impls,
Konrad Dybcio
- [PATCH v3 00/12] Add support for RaspberryPi RP1 PCI device using a DT overlay,
Andrea della Porta
- [PATCH v3 02/12] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings, Andrea della Porta
- [PATCH v3 01/12] dt-bindings: clock: Add RaspberryPi RP1 clock bindings, Andrea della Porta
- [PATCH v3 03/12] dt-bindings: pci: Add common schema for devices accessible through PCI BARs, Andrea della Porta
- [PATCH v3 04/12] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1, Andrea della Porta
- [PATCH v3 05/12] PCI: of_property: Assign PCI instead of CPU bus address to dynamic bridge nodes, Andrea della Porta
- [PATCH v3 06/12] of: address: Preserve the flags portion on 1:1 dma-ranges mapping, Andrea della Porta
- [PATCH v3 09/12] arm64: dts: rp1: Add support for RaspberryPi's RP1 device, Andrea della Porta
- [PATCH v3 08/12] pinctrl: rp1: Implement RaspberryPi RP1 gpio support, Andrea della Porta
- [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1, Andrea della Porta
- [PATCH v3 11/12] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5, Andrea della Porta
- [PATCH v3 12/12] arm64: defconfig: Enable RP1 misc/clock/gpio drivers, Andrea della Porta
- [PATCH v3 10/12] misc: rp1: RaspberryPi RP1 misc driver, Andrea della Porta
- [PATCH v5 0/4] Add CMN PLL clock controller driver for IPQ9574,
Luo Jie
- [PATCH] dt-bindings: power: fsl,imx-gpc: Document fsl,imx6sll-gpc,
Fabio Estevam
- [PATCH] ARM: dts: imx6sll: Improve gpc description,
Fabio Estevam
- [PATCH v5 1/3] spinlock: extend guard with spinlock_bh variants,
Christian Marangi
- [PATCH 0/5] Add support for ADIS16550 and ADIS16550W,
Robert Budai
- [PATCH v3 6/7] dt-bindings: firmware: arm,scmi: Add missing vendor string,
Cristian Marussi
- [PATCH v3 3/7] dt-bindings: firmware: arm,scmi: Introduce more transport properties, Cristian Marussi
- [PATCH v2] arm64: dts: qcom: qcs615: Add QUPv3 configuration,
Viken Dadhaniya
- [PATCH v4 0/2] USB: xhci: add support for PWRON polarity invert (TI TUSB73x0),
Francesco Dolcini
- [PATCH 0/2] pwm: add PWM driver for atcpit100,
Ben Zong-You Xie
- [PATCH] riscv: dts: sophgo: fix pinctrl base-address,
Thomas Bonnefille
- [RFC PATCH 00/10] Support simple-framebuffer on imx8m,
Dario Binacchi
- [RFC PATCH 01/10] dt-bindings: soc: imx-blk-ctrl: add 'fsl,power-domains-boot-on' property, Dario Binacchi
- [RFC PATCH 03/10] dt-bindings: power: gpcv2: add 'fsl,boot-on' property, Dario Binacchi
- [RFC PATCH 05/10] dt-bindings: display: panel: add 'syna,boot-on' property, Dario Binacchi
- [RFC PATCH 07/10] dt-bindings: bridge: samsung-dsim: add 'samsung,boot-on' property, Dario Binacchi
- [RFC PATCH 09/10] dt-bindings: lcdif: add 'fsl,boot-on' property, Dario Binacchi
- Re: [RFC PATCH 00/10] Support simple-framebuffer on imx8m, Maxime Ripard
- [PATCH v4 00/10] Add support for Exynos9810 SoC and Samsung Galaxy S9 (SM-G960F),
Markuss Broks
- [PATCH v4 01/10] dt-bindings: arm: cpus: Add Samsung Mongoose M3, Markuss Broks
- [PATCH v4 02/10] dt-bindings: hwinfo: samsung,exynos-chipid: Add Samsung exynos9810 compatible, Markuss Broks
- [PATCH v4 03/10] dt-bindings: pinctrl: samsung: Add compatible for Exynos9810 SoC, Markuss Broks
- [PATCH v4 04/10] dt-bindings: pinctrl: samsung: Add compatible for exynos9810-wakeup-eint, Markuss Broks
- [PATCH v4 06/10] dt-bindings: arm: samsung: Document Exynos9810 and starlte board binding, Markuss Broks
- [PATCH v4 05/10] dt-bindings: soc: samsung: exynos-pmu: Add exynos9810 compatible, Markuss Broks
- [PATCH v4 07/10] soc: samsung: exynos-chipid: Add support for Exynos9810 SoC, Markuss Broks
- [PATCH v4 08/10] pinctrl: samsung: Add Exynos9810 SoC specific data, Markuss Broks
- [PATCH v4 10/10] arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F), Markuss Broks
- [PATCH v4 09/10] arm64: dts: exynos: Add Exynos9810 SoC support, Markuss Broks
- [PATCH net] dt-bindings: net: xlnx,axi-ethernet: Correct phy-mode property value,
Suraj Gupta
- [PATCH v7 0/5] Add DeepComputing FML13V01 board dts,
Guodong Xu
- [PATCH] arm64: dts: ti: k3-j722s-evm: Add pinmux for RPi Header,
Bhavya Kapoor
- [PATCH v1 0/2] arm64: dts: imx8mp: add support for the ABB SoM and carrier,
Heiko Schocher
- [PATCH v3 0/2] Adds SPMI bus, PMIC and peripherals for qcs615,
Tingguo Cheng
- [PATCH 0/3] riscv: Add bfloat16 instruction support,
Inochi Amaoto
- [PATCH 0/6] Improvements and Enhancements for AD5791 DAC Driver,
ahaslam
- [PATCH v3] dt-bindings: pinctrl: convert pinctrl-mcp23s08.txt to yaml format,
Himanshu Bhavani
- [PATCH V5 0/6] Add minimal boot support for IPQ5424,
Sricharan R
- [PATCH v2 0/2] riscv: spacemit: add i2c support to K1 SoC,
Troy Mitchell
- [PATCH v7 0/3] [PATCH v6 0/3] Add support for AST2700 clk driver,
Ryan Chen
- Info, Van Esource
- [PATCH v2 0/3] Update ASPEED WDT bootstatus,
Chin-Ting Kuo
- [PATCH v4 00/13] Add ITE IT6263 LVDS to HDMI converter support,
Liu Ying
- [PATCH v4 01/13] arm64: dts: imx8mp-skov-revb-mi1010ait-1cp1: Set "media_disp2_pix" clock rate to 70MHz, Liu Ying
- [PATCH v4 02/13] drm/bridge: fsl-ldb: Get the next non-panel bridge, Liu Ying
- [PATCH v4 03/13] drm/bridge: fsl-ldb: Use clk_round_rate() to validate "ldb" clock rate, Liu Ying
- [PATCH v4 04/13] media: uapi: Add MEDIA_BUS_FMT_RGB101010_1X7X5_{SPWG, JEIDA}, Liu Ying
- [PATCH v4 05/13] drm: of: Get MEDIA_BUS_FMT_RGB101010_1X7X5_{JEIDA, SPWG} LVDS data mappings, Liu Ying
- [PATCH v4 06/13] drm: of: Add drm_of_lvds_get_dual_link_pixel_order_sink(), Liu Ying
- [PATCH v4 07/13] dt-bindings: display: lvds-data-mapping: Add 30-bit RGB pixel data mappings, Liu Ying
- [PATCH v4 08/13] dt-bindings: display: Document dual-link LVDS display common properties, Liu Ying
- [PATCH v4 09/13] dt-bindings: display: bridge: Add ITE IT6263 LVDS to HDMI converter, Liu Ying
- [PATCH v4 10/13] drm/bridge: Add ITE IT6263 LVDS to HDMI converter, Liu Ying
- [PATCH v4 11/13] arm64: dts: imx8mp-evk: Add NXP LVDS to HDMI adapter cards, Liu Ying
- [PATCH v4 12/13] arm64: defconfig: Enable ITE IT6263 driver, Liu Ying
- [PATCH v4 13/13] MAINTAINERS: Add maintainer for ITE IT6263 driver, Liu Ying
- Re: [PATCH v4 00/13] Add ITE IT6263 LVDS to HDMI converter support, Dmitry Baryshkov
- [PATCH v2] ASoC: dt-bindings: fsl_spdif: Document imx6sl/sx compatible fallback,
Fabio Estevam
- [PATCH v2] arm64: dts: qcom: Add coresight nodes for QCS615, Jie Gan
- [PATCH] riscv: dts: sophgo: Add ethernet configuration for cv18xx,
Inochi Amaoto
- [PATCH] arm64: dts: imx8mp-navqp: Add HDMI support,
Gilles Talis
- [PATCH v4 0/4] Add i2c driver for Bosch BMI260 IMU,
Justin Weiss
- [PATCH v6 0/5] Add DeepComputing FML13V01 board dts,
Guodong Xu
- [PATCHv3 00/22] Add Enclustra Arria10 and Cyclone5 SoMs,
Lothar Rubusch
- [PATCHv3 01/22] ARM: dts: socfpga: fix typo, Lothar Rubusch
- [PATCHv3 02/22] ARM: dts: socfpga: align bus name with bindings, Lothar Rubusch
- [PATCHv3 03/22] ARM: dts: socfpga: align dma name with binding, Lothar Rubusch
- [PATCHv3 04/22] ARM: dts: socfpga: align fpga-region name, Lothar Rubusch
- [PATCHv3 05/22] ARM: dts: socfpga: add label to clock manager, Lothar Rubusch
- [PATCHv3 06/22] ARM: dts: socfpga: add missing cells properties, Lothar Rubusch
- [PATCHv3 07/22] ARM: dts: socfpga: fix missing ranges, Lothar Rubusch
- [PATCHv3 08/22] ARM: dts: socfpga: add clock-frequency property, Lothar Rubusch
- [PATCHv3 09/22] ARM: dts: socfpga: add ranges property to sram, Lothar Rubusch
- [PATCHv3 10/22] ARM: dts: socfpga: remove arria10 reset-names, Lothar Rubusch
- [PATCHv3 11/22] dt-bindings: net: snps,dwmac: add support for Arria10, Lothar Rubusch
- [PATCHv3 12/22] ARM: dts: socfpga: add Enclustra boot-mode dtsi, Lothar Rubusch
- [PATCHv3 13/22] ARM: dts: socfpga: add Enclustra base-board dtsi, Lothar Rubusch
- [PATCHv3 14/22] ARM: dts: socfpga: add Enclustra Mercury SA1, Lothar Rubusch
- [PATCHv3 15/22] dt-bindings: altera: add Enclustra Mercury SA1, Lothar Rubusch
- [PATCHv3 16/22] ARM: dts: socfpga: add Enclustra Mercury+ SA2, Lothar Rubusch
- [PATCHv3 17/22] dt-bindings: altera: add binding for Mercury+ SA2, Lothar Rubusch
- [PATCHv3 18/22] ARM: dts: socfpga: add Mercury AA1 combinations, Lothar Rubusch
- [PATCHv3 19/22] dt-bindings: altera: add Mercury AA1 combinations, Lothar Rubusch
- [PATCHv3 20/22] ARM: dts: socfpga: removal of generic PE1 dts, Lothar Rubusch
- [PATCHv3 21/22] dt-bindings: altera: removal of generic PE1 dts, Lothar Rubusch
- [PATCHv3 22/22] ARM: dts: socfpga: add Enclustra SoM dts files, Lothar Rubusch
- Re: [PATCHv3 00/22] Add Enclustra Arria10 and Cyclone5 SoMs, Rob Herring (Arm)
- [PATCH v4 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023,
Jens Glathe via B4 Relay
- [PATCH v3 0/2] spi-nor: add optional vcc-supply and enable it for i.MX93,
Peng Fan (OSS)
- [PATCH v2 10/10] ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano, Csókás, Bence
- [PATCH v2 09/10] ARM: dts: suniv: f1c100s: Add support for Audio Codec, Csókás, Bence
- [PATCH v2 07/10] dt-bindings: sound: Add Allwinner suniv F1C100s Audio Codec, Csókás, Bence
- [PATCH v2 05/10] ARM: dts: suniv: f1c100s: Add support for DMA, Csókás, Bence
- [PATCH v2 03/10] dt-bindings: dmaengine: Add Allwinner suniv F1C100s DMA,
Csókás, Bence
- [PATCH 0/2] Add support for ltc4162-f/s and ltc4015,
Kim Seer Paller
- [PATCH v5 00/11] clk: qcom: add support for clock controllers on the SAR2130P platform,
Dmitry Baryshkov
- [PATCH v5 01/11] dt-bindings: clock: qcom,rpmhcc: Add SAR2130P compatible, Dmitry Baryshkov
- [PATCH v5 03/11] dt-bindings: clock: qcom,sm8550-tcsr: Add SAR2130P compatible, Dmitry Baryshkov
- [PATCH v5 02/11] dt-bindings: clock: qcom: document SAR2130P Global Clock Controller, Dmitry Baryshkov
- [PATCH v5 04/11] dt-bindings: clock: qcom,sm8550-dispcc: Add SAR2130P compatible, Dmitry Baryshkov
- [PATCH v5 05/11] dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles, Dmitry Baryshkov
- [PATCH v5 06/11] clk: qcom: rcg2: add clk_rcg2_shared_floor_ops, Dmitry Baryshkov
- [PATCH v5 07/11] clk: qcom: rpmh: add support for SAR2130P, Dmitry Baryshkov
- [PATCH v5 09/11] clk: qcom: tcsrcc-sm8550: add SAR2130P support, Dmitry Baryshkov
- [PATCH v5 10/11] clk: qcom: dispcc-sm8550: enable support for SAR2130P, Dmitry Baryshkov
- [PATCH v5 08/11] clk: qcom: add support for GCC on SAR2130P, Dmitry Baryshkov
- [PATCH v5 11/11] clk: qcom: add SAR2130P GPU Clock Controller support, Dmitry Baryshkov
- Re: (subset) [PATCH v5 00/11] clk: qcom: add support for clock controllers on the SAR2130P platform, Bjorn Andersson
- [PATCH 0/3] arm64: dts: qcom: add QAR2130P support,
Dmitry Baryshkov
- [PATCH v2 0/2] nvmem: qfprom: add Qualcomm SAR2130P support,
Dmitry Baryshkov
- [PATCH 0/3] remoteproc: qcom: pas: enable ADSP support on Qualcomm SAR2130P,
Dmitry Baryshkov
- [PATCH] dt-bindings: thermal: qcom-tsens: add SAR2130P compatible,
Dmitry Baryshkov
- [PATCH v3] dt-bindings: power: Convert raspberrypi,bcm2835-power to Dt schema,
Karan Sanghavi
- [PATCH v3 00/10] Add support for Exynos9810 SoC and Samsung Galaxy S9 (SM-G960F),
Markuss Broks
- [PATCH v3 01/10] dt-bindings: arm: cpus: Add Samsung Mongoose M3, Markuss Broks
- [PATCH v3 02/10] dt-bindings: hwinfo: samsung,exynos-chipid: Add Samsung exynos9810 compatible, Markuss Broks
- [PATCH v3 03/10] dt-bindings: pinctrl: samsung: Add compatible for Exynos9810 SoC, Markuss Broks
- [PATCH v3 04/10] dt-bindings: pinctrl: samsung: Add compatible for exynos9810-wakeup-eint, Markuss Broks
- [PATCH v3 05/10] dt-bindings: soc: samsung: exynos-pmu: Add exynos9810 compatible, Markuss Broks
- [PATCH v3 06/10] dt-bindings: arm: samsung: Document Exynos9810 and starlte board binding, Markuss Broks
- [PATCH v3 07/10] soc: samsung: exynos-chipid: Add support for Exynos9810 SoC, Markuss Broks
- [PATCH v3 08/10] pinctrl: samsung: Add Exynos9810 SoC specific data, Markuss Broks
- [PATCH v3 09/10] arm64: dts: exynos: Add Exynos9810 SoC support, Markuss Broks
- [PATCH v3 10/10] arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F), Markuss Broks
[Index of Archives]
[Device Tree Compilter]
[Device Tree Spec]
[Linux USB Devel]
[Video for Linux]
[Linux SCSI]
[Scanner Discussion]
[Yosemite Forum]
