On Thu, Jan 09, 2025 at 11:27:16AM +0800, Damon Ding wrote:
> The main modification is moving the DP AUX initialization from function
> analogix_dp_bind() to analogix_dp_probe(). In order to get the EDID of
> eDP panel during probing, it is also needed to advance PM operaions to
> ensure that eDP controller and phy are prepared for AUX transmission.
>
> Signed-off-by: Damon Ding <damon.ding@xxxxxxxxxxxxxx>
>
> ---
>
> Changes in v4:
> - Use done_probing() to call drm_of_find_panel_or_bridge() and
> component_add() when getting panel from the DP AUX bus
>
> Changes in v5:
> - Advance PM operations to make eDP AUX work well
> ---
> .../drm/bridge/analogix/analogix_dp_core.c | 62 ++++++++++---------
> 1 file changed, 34 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> index 8251adfce2f9..78e78fb474d3 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> @@ -1548,6 +1548,18 @@ static ssize_t analogix_dpaux_transfer(struct drm_dp_aux *aux,
> return ret;
> }
>
> +static void analogix_dp_runtime_disable(void *data)
> +{
> + struct analogix_dp_device *dp = (struct analogix_dp_device *)data;
> +
> + if (IS_ENABLED(CONFIG_PM)) {
> + pm_runtime_dont_use_autosuspend(dp->dev);
> + pm_runtime_disable(dp->dev);
> + } else {
> + analogix_dp_suspend(dp);
> + }
> +}
> +
> struct analogix_dp_device *
> analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data)
> {
> @@ -1658,8 +1670,29 @@ analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data)
> }
> disable_irq(dp->irq);
>
> + dp->aux.name = "DP-AUX";
> + dp->aux.transfer = analogix_dpaux_transfer;
> + dp->aux.dev = dp->dev;
> + drm_dp_aux_init(&dp->aux);
> +
> + if (IS_ENABLED(CONFIG_PM)) {
> + pm_runtime_use_autosuspend(dp->dev);
> + pm_runtime_set_autosuspend_delay(dp->dev, 100);
> + pm_runtime_enable(dp->dev);
> + } else {
> + ret = analogix_dp_resume(dp);
> + if (ret)
> + goto err_disable_clk;
> + }
> +
> + ret = devm_add_action_or_reset(dev, analogix_dp_runtime_disable, dp);
This looks like a local version of devm_pm_runtime_enable()
> + if (ret)
> + goto err_disable_pm_runtime;
> +
> return dp;
>
> +err_disable_pm_runtime:
> + analogix_dp_runtime_disable((void *)dp);
> err_disable_clk:
> clk_disable_unprepare(dp->clock);
> return ERR_PTR(ret);
> @@ -1708,25 +1741,12 @@ int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
> dp->drm_dev = drm_dev;
> dp->encoder = dp->plat_data->encoder;
>
> - if (IS_ENABLED(CONFIG_PM)) {
> - pm_runtime_use_autosuspend(dp->dev);
> - pm_runtime_set_autosuspend_delay(dp->dev, 100);
> - pm_runtime_enable(dp->dev);
> - } else {
> - ret = analogix_dp_resume(dp);
> - if (ret)
> - return ret;
> - }
> -
> - dp->aux.name = "DP-AUX";
> - dp->aux.transfer = analogix_dpaux_transfer;
> - dp->aux.dev = dp->dev;
> dp->aux.drm_dev = drm_dev;
>
> ret = drm_dp_aux_register(&dp->aux);
> if (ret) {
> DRM_ERROR("failed to register AUX (%d)\n", ret);
> - goto err_disable_pm_runtime;
> + return ret;
> }
>
> ret = analogix_dp_create_bridge(drm_dev, dp);
> @@ -1739,13 +1759,6 @@ int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
>
> err_unregister_aux:
> drm_dp_aux_unregister(&dp->aux);
> -err_disable_pm_runtime:
> - if (IS_ENABLED(CONFIG_PM)) {
> - pm_runtime_dont_use_autosuspend(dp->dev);
> - pm_runtime_disable(dp->dev);
> - } else {
> - analogix_dp_suspend(dp);
> - }
>
> return ret;
> }
> @@ -1762,13 +1775,6 @@ void analogix_dp_unbind(struct analogix_dp_device *dp)
> }
>
> drm_dp_aux_unregister(&dp->aux);
> -
> - if (IS_ENABLED(CONFIG_PM)) {
> - pm_runtime_dont_use_autosuspend(dp->dev);
> - pm_runtime_disable(dp->dev);
> - } else {
> - analogix_dp_suspend(dp);
> - }
> }
> EXPORT_SYMBOL_GPL(analogix_dp_unbind);
>
> --
> 2.34.1
>
--
With best wishes
Dmitry
