On 25-03-08 01:01:31, Sebastian Reichel wrote:
> Hi,
>
> On Thu, Mar 06, 2025 at 11:05:02AM +0200, Abel Vesa wrote:
> > Due to the fact that Lenovo Thinkpad T14s Gen6 is available with both
> > OLED and LCD, the backlight control differs HW-wise. For the LCD variant,
> > the panel's backlight is controlled via one of the PWMs provided by the
> > PMK8550 PMIC. For the OLED variant, the backlight is internal to the
> > panel and therefore it is not described in devicetree.
> >
> > For this reason, create a generic dtsi for the T14s by renaming the
> > existing dts. While at it, add a node name to panel and drop the enable
> > gpio and pinctrl properties from the panel node. Then add the LCD variant
> > dts file with the old name and describe all backlight related nodes.
> >
> > So the existing dts will now be used for LCD variant while for OLED new
> > dts will be added.
> >
> > Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> > ---
> > [...]
> > + backlight: backlight {
> > + compatible = "pwm-backlight";
> > + pwms = <&pmk8550_pwm 0 5000000>;
>
> I've tried this patch series together with the fix series [0], but
> without the duty cycle calculation change [1]. Instead I changed the
> period from 5000000 to 4266667. With that everything works as
> expected for me.
>
> [0] https://lore.kernel.org/all/20250305-leds-qcom-lpg-fix-max-pwm-on-hi-res-v4-0-bfe124a53a9f@xxxxxxxxxx/
> [1] https://lore.kernel.org/all/20250303-leds-qcom-lpg-compute-pwm-value-using-period-v1-1-833e729e3da2@xxxxxxxxxx/
Yes, I forgot to squash in the correct period.
The period should actually be 4266537. This is because the max PWM value
is actually BIT(resolution) - 1.
Will update in next version.
The [1] patch was basically NACKed by Uwe. It is not needed if we set
the period to 4266537 in DT.
>
> Greetings,
>
> -- Sebastian
