Due to the fact that Lenovo Thinkpad T14s Gen6 is available with both
OLED and LCD, the backlight control differs HW-wise. For the LCD variant,
the panel's backlight is controlled via one of the PWMs provided by the
PMK8550 PMIC. For the OLED variant, the backlight is internal to the
panel and therefore it is not described in devicetree.
For this reason, create a generic dtsi for the T14s by renaming the
existing dts. While at it, add a node name to panel and drop the enable
gpio and pinctrl properties from the panel node. Then add the LCD variant
dts file with the old name and describe all backlight related nodes.
So the existing dts will now be used for LCD variant while for OLED new
dts will be added.
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
.../qcom/x1e78100-lenovo-thinkpad-t14s.dts | 1190 +----------------
...dts => x1e78100-lenovo-thinkpad-t14s.dtsi} | 6 +-
2 files changed, 57 insertions(+), 1139 deletions(-)
rewrite arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts (98%)
copy arch/arm64/boot/dts/qcom/{x1e78100-lenovo-thinkpad-t14s.dts => x1e78100-lenovo-thinkpad-t14s.dtsi} (99%)
diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
dissimilarity index 98%
index b2c2347f54fa..28ee6c74f2b8 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
@@ -1,1134 +1,56 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
- * Copyright (c) 2024, Linaro Limited
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-
-#include "x1e80100.dtsi"
-#include "x1e80100-pmics.dtsi"
-
-/ {
- model = "Lenovo ThinkPad T14s Gen 6";
- compatible = "lenovo,thinkpad-t14s", "qcom,x1e78100", "qcom,x1e80100";
- chassis-type = "laptop";
-
- wcd938x: audio-codec {
- compatible = "qcom,wcd9385-codec";
-
- pinctrl-0 = <&wcd_default>;
- pinctrl-names = "default";
-
- qcom,micbias1-microvolt = <1800000>;
- qcom,micbias2-microvolt = <1800000>;
- qcom,micbias3-microvolt = <1800000>;
- qcom,micbias4-microvolt = <1800000>;
- qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
- qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
- qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
- qcom,rx-device = <&wcd_rx>;
- qcom,tx-device = <&wcd_tx>;
-
- reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
-
- vdd-buck-supply = <&vreg_l15b_1p8>;
- vdd-rxtx-supply = <&vreg_l15b_1p8>;
- vdd-io-supply = <&vreg_l15b_1p8>;
- vdd-mic-bias-supply = <&vreg_bob1>;
-
- #sound-dai-cells = <1>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&hall_int_n_default>;
- pinctrl-names = "default";
-
- switch-lid {
- gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
- linux,input-type = <EV_SW>;
- linux,code = <SW_LID>;
- wakeup-source;
- wakeup-event-action = <EV_ACT_DEASSERTED>;
- };
- };
-
- pmic-glink {
- compatible = "qcom,x1e80100-pmic-glink",
- "qcom,sm8550-pmic-glink",
- "qcom,pmic-glink";
- orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
- <&tlmm 123 GPIO_ACTIVE_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* Display-adjacent port */
- connector@0 {
- compatible = "usb-c-connector";
- reg = <0>;
- power-role = "dual";
- data-role = "dual";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- pmic_glink_ss0_hs_in: endpoint {
- remote-endpoint = <&usb_1_ss0_dwc3_hs>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- pmic_glink_ss0_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss0_qmpphy_out>;
- };
- };
- };
- };
-
- /* User-adjacent port */
- connector@1 {
- compatible = "usb-c-connector";
- reg = <1>;
- power-role = "dual";
- data-role = "dual";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- pmic_glink_ss1_hs_in: endpoint {
- remote-endpoint = <&usb_1_ss1_dwc3_hs>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- pmic_glink_ss1_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss1_qmpphy_out>;
- };
- };
- };
- };
- };
-
- reserved-memory {
- linux,cma {
- compatible = "shared-dma-pool";
- size = <0x0 0x8000000>;
- reusable;
- linux,cma-default;
- };
- };
-
- vreg_edp_3p3: regulator-edp-3p3 {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_EDP_3P3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&edp_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vreg_nvme: regulator-nvme {
- compatible = "regulator-fixed";
-
- regulator-name = "VREG_NVME_3P3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&nvme_reg_en>;
- pinctrl-names = "default";
-
- regulator-boot-on;
- };
-
- vph_pwr: regulator-vph-pwr {
- compatible = "regulator-fixed";
-
- regulator-name = "vph_pwr";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- sound {
- compatible = "qcom,x1e80100-sndcard";
- model = "X1E80100-LENOVO-Thinkpad-T14s";
- audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
- "SpkrRight IN", "WSA WSA_SPK2 OUT",
- "IN1_HPHL", "HPHL_OUT",
- "IN2_HPHR", "HPHR_OUT",
- "AMIC2", "MIC BIAS2",
- "VA DMIC0", "MIC BIAS1",
- "VA DMIC1", "MIC BIAS1",
- "VA DMIC0", "VA MIC BIAS1",
- "VA DMIC1", "VA MIC BIAS1",
- "TX SWR_INPUT1", "ADC2_OUTPUT";
-
- wcd-playback-dai-link {
- link-name = "WCD Playback";
-
- cpu {
- sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
- };
-
- codec {
- sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
- };
-
- platform {
- sound-dai = <&q6apm>;
- };
- };
-
- wcd-capture-dai-link {
- link-name = "WCD Capture";
-
- cpu {
- sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
- };
-
- codec {
- sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
- };
-
- platform {
- sound-dai = <&q6apm>;
- };
- };
-
- wsa-dai-link {
- link-name = "WSA Playback";
-
- cpu {
- sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
- };
-
- codec {
- sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
- };
-
- platform {
- sound-dai = <&q6apm>;
- };
- };
-
- va-dai-link {
- link-name = "VA Capture";
-
- cpu {
- sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
- };
-
- codec {
- sound-dai = <&lpass_vamacro 0>;
- };
-
- platform {
- sound-dai = <&q6apm>;
- };
- };
- };
-};
-
-&apps_rsc {
- regulators-0 {
- compatible = "qcom,pm8550-rpmh-regulators";
- qcom,pmic-id = "b";
-
- vdd-bob1-supply = <&vph_pwr>;
- vdd-bob2-supply = <&vph_pwr>;
- vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
- vdd-l2-l13-l14-supply = <&vreg_bob1>;
- vdd-l5-l16-supply = <&vreg_bob1>;
- vdd-l6-l7-supply = <&vreg_bob2>;
- vdd-l8-l9-supply = <&vreg_bob1>;
- vdd-l12-supply = <&vreg_s5j_1p2>;
- vdd-l15-supply = <&vreg_s4c_1p8>;
- vdd-l17-supply = <&vreg_bob2>;
-
- vreg_bob1: bob1 {
- regulator-name = "vreg_bob1";
- regulator-min-microvolt = <3008000>;
- regulator-max-microvolt = <3960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_bob2: bob2 {
- regulator-name = "vreg_bob2";
- regulator-min-microvolt = <2504000>;
- regulator-max-microvolt = <3008000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l1b_1p8: ldo1 {
- regulator-name = "vreg_l1b_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2b_3p0: ldo2 {
- regulator-name = "vreg_l2b_3p0";
- regulator-min-microvolt = <3072000>;
- regulator-max-microvolt = <3072000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l4b_1p8: ldo4 {
- regulator-name = "vreg_l4b_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l6b_1p8: ldo6 {
- regulator-name = "vreg_l6b_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l8b_3p0: ldo8 {
- regulator-name = "vreg_l8b_3p0";
- regulator-min-microvolt = <3072000>;
- regulator-max-microvolt = <3072000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l9b_2p9: ldo9 {
- regulator-name = "vreg_l9b_2p9";
- regulator-min-microvolt = <2960000>;
- regulator-max-microvolt = <2960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l10b_1p8: ldo10 {
- regulator-name = "vreg_l10b_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l12b_1p2: ldo12 {
- regulator-name = "vreg_l12b_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l13b_3p0: ldo13 {
- regulator-name = "vreg_l13b_3p0";
- regulator-min-microvolt = <3072000>;
- regulator-max-microvolt = <3072000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l14b_3p0: ldo14 {
- regulator-name = "vreg_l14b_3p0";
- regulator-min-microvolt = <3072000>;
- regulator-max-microvolt = <3072000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l15b_1p8: ldo15 {
- regulator-name = "vreg_l15b_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l17b_2p5: ldo17 {
- regulator-name = "vreg_l17b_2p5";
- regulator-min-microvolt = <2504000>;
- regulator-max-microvolt = <2504000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-1 {
- compatible = "qcom,pm8550ve-rpmh-regulators";
- qcom,pmic-id = "c";
-
- vdd-l1-supply = <&vreg_s5j_1p2>;
- vdd-l2-supply = <&vreg_s1f_0p7>;
- vdd-l3-supply = <&vreg_s1f_0p7>;
- vdd-s4-supply = <&vph_pwr>;
-
- vreg_s4c_1p8: smps4 {
- regulator-name = "vreg_s4c_1p8";
- regulator-min-microvolt = <1856000>;
- regulator-max-microvolt = <2000000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l1c_1p2: ldo1 {
- regulator-name = "vreg_l1c_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2c_0p8: ldo2 {
- regulator-name = "vreg_l2c_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <880000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3c_0p8: ldo3 {
- regulator-name = "vreg_l3c_0p8";
- regulator-min-microvolt = <912000>;
- regulator-max-microvolt = <912000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-2 {
- compatible = "qcom,pmc8380-rpmh-regulators";
- qcom,pmic-id = "d";
-
- vdd-l1-supply = <&vreg_s1f_0p7>;
- vdd-l2-supply = <&vreg_s1f_0p7>;
- vdd-l3-supply = <&vreg_s4c_1p8>;
- vdd-s1-supply = <&vph_pwr>;
-
- vreg_l1d_0p8: ldo1 {
- regulator-name = "vreg_l1d_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <880000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2d_0p9: ldo2 {
- regulator-name = "vreg_l2d_0p9";
- regulator-min-microvolt = <912000>;
- regulator-max-microvolt = <912000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3d_1p8: ldo3 {
- regulator-name = "vreg_l3d_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-3 {
- compatible = "qcom,pmc8380-rpmh-regulators";
- qcom,pmic-id = "e";
-
- vdd-l2-supply = <&vreg_s1f_0p7>;
- vdd-l3-supply = <&vreg_s5j_1p2>;
-
- vreg_l2e_0p8: ldo2 {
- regulator-name = "vreg_l2e_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <880000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3e_1p2: ldo3 {
- regulator-name = "vreg_l3e_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-4 {
- compatible = "qcom,pmc8380-rpmh-regulators";
- qcom,pmic-id = "f";
-
- vdd-l1-supply = <&vreg_s5j_1p2>;
- vdd-l2-supply = <&vreg_s5j_1p2>;
- vdd-l3-supply = <&vreg_s5j_1p2>;
- vdd-s1-supply = <&vph_pwr>;
-
- vreg_s1f_0p7: smps1 {
- regulator-name = "vreg_s1f_0p7";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1100000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-6 {
- compatible = "qcom,pm8550ve-rpmh-regulators";
- qcom,pmic-id = "i";
-
- vdd-l1-supply = <&vreg_s4c_1p8>;
- vdd-l2-supply = <&vreg_s5j_1p2>;
- vdd-l3-supply = <&vreg_s1f_0p7>;
- vdd-s1-supply = <&vph_pwr>;
- vdd-s2-supply = <&vph_pwr>;
-
- vreg_l1i_1p8: ldo1 {
- regulator-name = "vreg_l1i_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2i_1p2: ldo2 {
- regulator-name = "vreg_l2i_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3i_0p8: ldo3 {
- regulator-name = "vreg_l3i_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <880000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- regulators-7 {
- compatible = "qcom,pm8550ve-rpmh-regulators";
- qcom,pmic-id = "j";
-
- vdd-l1-supply = <&vreg_s1f_0p7>;
- vdd-l2-supply = <&vreg_s5j_1p2>;
- vdd-l3-supply = <&vreg_s1f_0p7>;
- vdd-s5-supply = <&vph_pwr>;
-
- vreg_s5j_1p2: smps5 {
- regulator-name = "vreg_s5j_1p2";
- regulator-min-microvolt = <1256000>;
- regulator-max-microvolt = <1304000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l1j_0p8: ldo1 {
- regulator-name = "vreg_l1j_0p8";
- regulator-min-microvolt = <912000>;
- regulator-max-microvolt = <912000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l2j_1p2: ldo2 {
- regulator-name = "vreg_l2j_1p2";
- regulator-min-microvolt = <1256000>;
- regulator-max-microvolt = <1256000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l3j_0p8: ldo3 {
- regulator-name = "vreg_l3j_0p8";
- regulator-min-microvolt = <880000>;
- regulator-max-microvolt = <880000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-};
-
-&gpu {
- status = "okay";
-
- zap-shader {
- firmware-name = "qcom/x1e80100/LENOVO/21N1/qcdxkmsuc8380.mbn";
- };
-};
-
-&i2c0 {
- clock-frequency = <400000>;
-
- pinctrl-0 = <&qup_i2c0_data_clk>, <&tpad_default>;
- pinctrl-names = "default";
-
- status = "okay";
-
- /* ELAN06E2 or ELAN06E3 */
- touchpad@15 {
- compatible = "hid-over-i2c";
- reg = <0x15>;
-
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
-
- wakeup-source;
- };
-
- /* SYNA8022 or SYNA8024 */
- touchpad@2c {
- compatible = "hid-over-i2c";
- reg = <0x2c>;
-
- hid-descr-addr = <0x20>;
- interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
-
- wakeup-source;
- };
-
- /* ELAN06F1 or SYNA06F2 */
- keyboard@3a {
- compatible = "hid-over-i2c";
- reg = <0x3a>;
-
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
-
- pinctrl-0 = <&kybd_default>;
- pinctrl-names = "default";
-
- wakeup-source;
- };
-};
-
-&i2c5 {
- clock-frequency = <400000>;
-
- status = "okay";
-
- eusb5_repeater: redriver@43 {
- compatible = "nxp,ptn3222";
- reg = <0x43>;
- #phy-cells = <0>;
-
- vdd3v3-supply = <&vreg_l13b_3p0>;
- vdd1v8-supply = <&vreg_l4b_1p8>;
-
- reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
-
- pinctrl-0 = <&eusb5_reset_n>;
- pinctrl-names = "default";
- };
-
- eusb3_repeater: redriver@47 {
- compatible = "nxp,ptn3222";
- reg = <0x47>;
- #phy-cells = <0>;
-
- vdd3v3-supply = <&vreg_l13b_3p0>;
- vdd1v8-supply = <&vreg_l4b_1p8>;
-
- reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-
- pinctrl-0 = <&eusb3_reset_n>;
- pinctrl-names = "default";
- };
-
- eusb6_repeater: redriver@4f {
- compatible = "nxp,ptn3222";
- reg = <0x4f>;
- #phy-cells = <0>;
-
- vdd3v3-supply = <&vreg_l13b_3p0>;
- vdd1v8-supply = <&vreg_l4b_1p8>;
-
- reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
-
- pinctrl-0 = <&eusb6_reset_n>;
- pinctrl-names = "default";
- };
-};
-
-&i2c8 {
- clock-frequency = <400000>;
-
- status = "okay";
-
- /* ILIT2911 or GTCH1563 */
- touchscreen@10 {
- compatible = "hid-over-i2c";
- reg = <0x10>;
-
- hid-descr-addr = <0x1>;
- interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
-
- pinctrl-0 = <&ts0_default>;
- pinctrl-names = "default";
- };
-
- /* TODO: second-sourced touchscreen @ 0x41 */
-};
-
-&lpass_tlmm {
- spkr_01_sd_n_active: spkr-01-sd-n-active-state {
- pins = "gpio12";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- output-low;
- };
-};
-
-&lpass_vamacro {
- pinctrl-0 = <&dmic01_default>;
- pinctrl-names = "default";
-
- vdd-micb-supply = <&vreg_l1b_1p8>;
- qcom,dmic-sample-rate = <4800000>;
-};
-
-&mdss {
- status = "okay";
-};
-
-&mdss_dp3 {
- compatible = "qcom,x1e80100-dp";
- /delete-property/ #sound-dai-cells;
-
- status = "okay";
-
- aux-bus {
- panel {
- compatible = "edp-panel";
- enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
- power-supply = <&vreg_edp_3p3>;
-
- pinctrl-0 = <&edp_bl_en>;
- pinctrl-names = "default";
-
- port {
- edp_panel_in: endpoint {
- remote-endpoint = <&mdss_dp3_out>;
- };
- };
- };
- };
-
- ports {
- port@1 {
- reg = <1>;
-
- mdss_dp3_out: endpoint {
- data-lanes = <0 1 2 3>;
- link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
- remote-endpoint = <&edp_panel_in>;
- };
- };
- };
-};
-
-&mdss_dp3_phy {
- vdda-phy-supply = <&vreg_l3j_0p8>;
- vdda-pll-supply = <&vreg_l2j_1p2>;
-
- status = "okay";
-};
-
-&pcie4 {
- perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
- wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
-
- pinctrl-0 = <&pcie4_default>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&pcie4_phy {
- vdda-phy-supply = <&vreg_l3i_0p8>;
- vdda-pll-supply = <&vreg_l3e_1p2>;
-
- status = "okay";
-};
-
-&pcie6a {
- perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
- wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
-
- vddpe-3v3-supply = <&vreg_nvme>;
-
- pinctrl-0 = <&pcie6a_default>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&pcie6a_phy {
- vdda-phy-supply = <&vreg_l1d_0p8>;
- vdda-pll-supply = <&vreg_l2j_1p2>;
-
- status = "okay";
-};
-
-&pmc8380_3_gpios {
- edp_bl_en: edp-bl-en-state {
- pins = "gpio4";
- function = "normal";
- power-source = <1>;
- input-disable;
- output-enable;
- };
-};
-
-&qupv3_0 {
- status = "okay";
-};
-
-&qupv3_1 {
- status = "okay";
-};
-
-&qupv3_2 {
- status = "okay";
-};
-
-&remoteproc_adsp {
- firmware-name = "qcom/x1e80100/LENOVO/21N1/qcadsp8380.mbn",
- "qcom/x1e80100/LENOVO/21N1/adsp_dtbs.elf";
-
- status = "okay";
-};
-
-&remoteproc_cdsp {
- firmware-name = "qcom/x1e80100/LENOVO/21N1/qccdsp8380.mbn",
- "qcom/x1e80100/LENOVO/21N1/cdsp_dtbs.elf";
-
- status = "okay";
-};
-
-&smb2360_0 {
- status = "okay";
-};
-
-&smb2360_0_eusb2_repeater {
- vdd18-supply = <&vreg_l3d_1p8>;
- vdd3-supply = <&vreg_l2b_3p0>;
-};
-
-&smb2360_1 {
- status = "okay";
-};
-
-&smb2360_1_eusb2_repeater {
- vdd18-supply = <&vreg_l3d_1p8>;
- vdd3-supply = <&vreg_l14b_3p0>;
-};
-
-&swr0 {
- status = "okay";
-
- pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
- pinctrl-names = "default";
-
- /* WSA8845, Left Speaker */
- left_spkr: speaker@0,0 {
- compatible = "sdw20217020400";
- reg = <0 0>;
- reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "SpkrLeft";
- vdd-1p8-supply = <&vreg_l15b_1p8>;
- vdd-io-supply = <&vreg_l12b_1p2>;
- qcom,port-mapping = <1 2 3 7 10 13>;
- };
-
- /* WSA8845, Right Speaker */
- right_spkr: speaker@0,1 {
- compatible = "sdw20217020400";
- reg = <0 1>;
- reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "SpkrRight";
- vdd-1p8-supply = <&vreg_l15b_1p8>;
- vdd-io-supply = <&vreg_l12b_1p2>;
- qcom,port-mapping = <4 5 6 7 11 13>;
- };
-};
-
-&swr1 {
- status = "okay";
-
- /* WCD9385 RX */
- wcd_rx: codec@0,4 {
- compatible = "sdw20217010d00";
- reg = <0 4>;
- qcom,rx-port-mapping = <1 2 3 4 5>;
- };
-};
-
-&swr2 {
- status = "okay";
-
- /* WCD9385 TX */
- wcd_tx: codec@0,3 {
- compatible = "sdw20217010d00";
- reg = <0 3>;
- qcom,tx-port-mapping = <2 2 3 4>;
- };
-};
-
-&tlmm {
- gpio-reserved-ranges = <34 2>, /* Unused */
- <44 4>, /* SPI (TPM) */
- <72 2>, /* Secure EC I2C connection (?) */
- <238 1>; /* UFS Reset */
-
- eusb3_reset_n: eusb3-reset-n-state {
- pins = "gpio6";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- output-low;
- };
-
- eusb5_reset_n: eusb5-reset-n-state {
- pins = "gpio7";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- output-low;
- };
-
- eusb6_reset_n: eusb6-reset-n-state {
- pins = "gpio184";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- output-low;
- };
-
- tpad_default: tpad-default-state {
- pins = "gpio3";
- function = "gpio";
- bias-pull-up;
- };
-
- nvme_reg_en: nvme-reg-en-state {
- pins = "gpio18";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- ts0_default: ts0-default-state {
- reset-n-pins {
- pins = "gpio48";
- function = "gpio";
- output-high;
- drive-strength = <16>;
- };
-
- int-n-pins {
- pins = "gpio51";
- function = "gpio";
- bias-disable;
- };
- };
-
- kybd_default: kybd-default-state {
- pins = "gpio67";
- function = "gpio";
- bias-disable;
- };
-
- edp_reg_en: edp-reg-en-state {
- pins = "gpio70";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- };
-
- hall_int_n_default: hall-int-n-state {
- pins = "gpio92";
- function = "gpio";
- bias-disable;
- };
-
- pcie4_default: pcie4-default-state {
- clkreq-n-pins {
- pins = "gpio147";
- function = "pcie4_clk";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- perst-n-pins {
- pins = "gpio146";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- wake-n-pins {
- pins = "gpio148";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie6a_default: pcie6a-default-state {
- clkreq-n-pins {
- pins = "gpio153";
- function = "pcie6a_clk";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- perst-n-pins {
- pins = "gpio152";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- wake-n-pins {
- pins = "gpio154";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- wcd_default: wcd-reset-n-active-state {
- pins = "gpio191";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- output-low;
- };
-};
-
-&usb_1_ss0_hsphy {
- vdd-supply = <&vreg_l3j_0p8>;
- vdda12-supply = <&vreg_l2j_1p2>;
-
- phys = <&smb2360_0_eusb2_repeater>;
-
- status = "okay";
-};
-
-&usb_1_ss0_qmpphy {
- vdda-phy-supply = <&vreg_l2j_1p2>;
- vdda-pll-supply = <&vreg_l1j_0p8>;
-
- status = "okay";
-};
-
-&usb_1_ss0 {
- status = "okay";
-};
-
-&usb_1_ss0_dwc3 {
- dr_mode = "host";
-};
-
-&usb_1_ss0_dwc3_hs {
- remote-endpoint = <&pmic_glink_ss0_hs_in>;
-};
-
-&usb_1_ss0_qmpphy_out {
- remote-endpoint = <&pmic_glink_ss0_ss_in>;
-};
-
-&usb_1_ss1_hsphy {
- vdd-supply = <&vreg_l3j_0p8>;
- vdda12-supply = <&vreg_l2j_1p2>;
-
- phys = <&smb2360_1_eusb2_repeater>;
-
- status = "okay";
-};
-
-&usb_1_ss1_qmpphy {
- vdda-phy-supply = <&vreg_l2j_1p2>;
- vdda-pll-supply = <&vreg_l2d_0p9>;
-
- status = "okay";
-};
-
-&usb_1_ss1 {
- status = "okay";
-};
-
-&usb_1_ss1_dwc3 {
- dr_mode = "host";
-};
-
-&usb_1_ss1_dwc3_hs {
- remote-endpoint = <&pmic_glink_ss1_hs_in>;
-};
-
-&usb_1_ss1_qmpphy_out {
- remote-endpoint = <&pmic_glink_ss1_ss_in>;
-};
-
-&usb_2 {
- status = "okay";
-};
-
-&usb_2_dwc3 {
- dr_mode = "host";
-};
-
-&usb_2_hsphy {
- vdd-supply = <&vreg_l2e_0p8>;
- vdda12-supply = <&vreg_l3e_1p2>;
-
- phys = <&eusb5_repeater>;
-
- status = "okay";
-};
-
-&usb_mp {
- status = "okay";
-};
-
-&usb_mp_hsphy0 {
- vdd-supply = <&vreg_l2e_0p8>;
- vdda12-supply = <&vreg_l3e_1p2>;
-
- phys = <&eusb6_repeater>;
-
- status = "okay";
-};
-
-&usb_mp_hsphy1 {
- vdd-supply = <&vreg_l2e_0p8>;
- vdda12-supply = <&vreg_l3e_1p2>;
-
- phys = <&eusb3_repeater>;
-
- status = "okay";
-};
-
-&usb_mp_qmpphy0 {
- vdda-phy-supply = <&vreg_l3e_1p2>;
- vdda-pll-supply = <&vreg_l3c_0p8>;
-
- status = "okay";
-};
-
-&usb_mp_qmpphy1 {
- vdda-phy-supply = <&vreg_l3e_1p2>;
- vdda-pll-supply = <&vreg_l3c_0p8>;
-
- status = "okay";
-};
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Linaro Limited
+ */
+
+#include "x1e78100-lenovo-thinkpad-t14s.dtsi"
+
+/ {
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pmk8550_pwm 0 5000000>;
+ enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+ power-supply = <&vreg_edp_bl>;
+
+ pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+ pinctrl-names = "default";
+ };
+
+ vreg_edp_bl: regulator-edp-bl {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VBL9";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_bl_reg_en>;
+
+ regulator-boot-on;
+ };
+};
+
+&panel {
+ backlight = <&backlight>;
+};
+
+&pmc8380_3_gpios {
+ edp_bl_reg_en: edp-bl-reg-en-state {
+ pins = "gpio10";
+ function = "normal";
+ };
+};
+
+&pmk8550_gpios {
+ edp_bl_pwm: edp-bl-pwm-state {
+ pins = "gpio5";
+ function = "func3";
+ };
+};
+
+&pmk8550_pwm {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
similarity index 99%
copy from arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
copy to arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
index b2c2347f54fa..802c50f78436 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
@@ -704,14 +704,10 @@ &mdss_dp3 {
status = "okay";
aux-bus {
- panel {
+ panel: panel {
compatible = "edp-panel";
- enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
power-supply = <&vreg_edp_3p3>;
- pinctrl-0 = <&edp_bl_en>;
- pinctrl-names = "default";
-
port {
edp_panel_in: endpoint {
remote-endpoint = <&mdss_dp3_out>;
--
2.34.1
