Hi, Usually the TI SN65DSI83 recovers from error by itself but during ESD tests, we have some cases where the TI SN65DSI83 didn't recover. In order to handle those cases, this series adds support for a recovery mechanism. Compare to the previous iteration, this v4 series: - rebase on top of v6.14-rc1 - disable/re-enable irq in the failure detection and reset process - Split the patch moving reset_pipe() from VC4 to a new helper - Rename the new helper to drm_atomic_helper_reset_crtc() - Remove state duplication and use bridge.encoder->crtc Best regards, Hervé Codina Changes v3 -> v4 v3: https://lore.kernel.org/lkml/20250108101907.410456-1-herve.codina@xxxxxxxxxxx/ - Patch 1: No changes - Patch 2 and 3 (patch 2 in v3): Rename the helper to drm_atomic_helper_reset_crtc() Split the patch available in v3 in two patches. - Patch 4 (patch 3 in v3): Take into account commit d2b8c6d549570 ("drm/bridge: ti-sn65dsi83: Add ti,lvds-vod-swing optional properties"), available in v6.14-rc1. Disable irq when a fault is detected and re-enable it after the pipe reset. Remove state duplication and use bridge.encoder->crtc directly Changes v2 -> v3 v2: https://lore.kernel.org/lkml/20241217143216.658461-1-herve.codina@xxxxxxxxxxx/ - Patch 1: No changes - Patch 2 (new in v3) Move reset_pipe() from VC4 HDMI driver to a new atomic helper - Patch 3 Use the new drm_atomic_helper_reset_pipe() Patch removed in v3 - Patch 2 in v2 No more needed Changes v1 -> v2 v1: https://lore.kernel.org/lkml/20241024095539.1637280-1-herve.codina@xxxxxxxxxxx/ - Patch 1: Add 'Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>' Add 'Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>' - Patch 2 (new patch in v2) Introduce drm_atomic_helper_disable_connector() - Patch 3 (patch 2 in v1) Reset the output path instead of the full pipeline. Update and add more information related to the bridge in commit log. Herve Codina (4): dt-bindings: display: bridge: sn65dsi83: Add interrupt drm/atomic-helper: Introduce drm_atomic_helper_reset_crtc() drm/vc4: hdmi: Use drm_atomic_helper_reset_crtc() drm: bridge: ti-sn65dsi83: Add error recovery mechanism .../bindings/display/bridge/ti,sn65dsi83.yaml | 3 + drivers/gpu/drm/bridge/ti-sn65dsi83.c | 131 ++++++++++++++++++ drivers/gpu/drm/drm_atomic_helper.c | 41 ++++++ drivers/gpu/drm/vc4/vc4_hdmi.c | 30 +--- include/drm/drm_atomic_helper.h | 2 + 5 files changed, 178 insertions(+), 29 deletions(-) -- 2.47.1
