On 28.05.2024 18:31, Alexander Dahl wrote: > These properties are common for all i2c subnodes, and marked as > 'required' in atmel/microchip i2c bindings. Not required anymore: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=cf7feb642dc0e36bbbda9ec9fecc6601f439b8dd > Allows to add i2c device > nodes (like an rtc for example) in other .dts files including > sam9x60.dtsi without requiring to repeat these properties for each i2c > device again and again. > > Found on a custom board after adding this in .dts: > > &flx5 { > atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; > status = "okay"; > > i2c5: i2c@600 { > pinctrl-0 = <&pinctrl_flx5_default>; > status = "okay"; > > pcf8523: rtc@68 { > compatible = "nxp,pcf8523"; > reg = <0x68>; > }; > }; > }; > > … which created a warning like this: > > […]:236.4-17: Warning (reg_format): /ahb/apb/flexcom@f0004000/i2c@600/rtc@68:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) > […]: Warning (pci_device_reg): Failed prerequisite 'reg_format' > […]: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' > […]: Warning (simple_bus_reg): Failed prerequisite 'reg_format' > […]/linux-6.6.25/arch/arm/boot/dts/microchip/sam9x60.dtsi:283.19-299.7: Warning (i2c_bus_bridge): /ahb/apb/flexcom@f0004000/i2c@600: incorrect #address-cells for I2C bus also defined at […]:228.16-238.4 > […]/linux-6.6.25/arch/arm/boot/dts/microchip/sam9x60.dtsi:283.19-299.7: Warning (i2c_bus_bridge): /ahb/apb/flexcom@f0004000/i2c@600: incorrect #size-cells for I2C bus also defined at […]:228.16-238.4 > […]: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' > […]: Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge' > […]: Warning (spi_bus_reg): Failed prerequisite 'reg_format' > […]:234.19-237.5: Warning (avoid_default_addr_size): /ahb/apb/flexcom@f0004000/i2c@600/rtc@68: Relying on default #address-cells value > […]:234.19-237.5: Warning (avoid_default_addr_size): /ahb/apb/flexcom@f0004000/i2c@600/rtc@68: Relying on default #size-cells value > […]: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size' > […]: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size' > > This probably should have been done with commit 84f23f3284d5 ("ARM: dts: > at91: sam9x60: move flexcom definitions") already, where those > address-cells and size-cells properties were left in the board .dts > files instead of moving them to the dtsi. > > Signed-off-by: Alexander Dahl <ada@xxxxxxxxxxx> Will apply it for the next PR. > --- > .../dts/microchip/at91-sam9x60_curiosity.dts | 2 -- > .../arm/boot/dts/microchip/at91-sam9x60ek.dts | 4 --- > arch/arm/boot/dts/microchip/sam9x60.dtsi | 26 +++++++++++++++++++ > 3 files changed, 26 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts > index c6fbdd29019f..b9ffd9e5faac 100644 > --- a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts > +++ b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts > @@ -198,8 +198,6 @@ i2c0: i2c@600 { > dmas = <0>, <0>; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_flx0_default>; > - #address-cells = <1>; > - #size-cells = <0>; > i2c-analog-filter; > i2c-digital-filter; > i2c-digital-filter-width-ns = <35>; > diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts > index f3cbb675cea4..3b38707d736e 100644 > --- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts > +++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts > @@ -207,8 +207,6 @@ &flx0 { > status = "okay"; > > i2c0: i2c@600 { > - #address-cells = <1>; > - #size-cells = <0>; > dmas = <0>, <0>; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_flx0_default>; > @@ -254,8 +252,6 @@ &flx6 { > status = "okay"; > > i2c6: i2c@600 { > - #address-cells = <1>; > - #size-cells = <0>; > dmas = <0>, <0>; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_flx6_default>; > diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi > index 291540e5d81e..551b46894f47 100644 > --- a/arch/arm/boot/dts/microchip/sam9x60.dtsi > +++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi > @@ -215,6 +215,8 @@ i2c4: i2c@600 { > compatible = "microchip,sam9x60-i2c"; > reg = <0x600 0x200>; > interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; > + #address-cells = <1>; > + #size-cells = <0>; > clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; > dmas = <&dma0 > (AT91_XDMAC_DT_MEM_IF(0) | > @@ -284,6 +286,8 @@ i2c5: i2c@600 { > compatible = "microchip,sam9x60-i2c"; > reg = <0x600 0x200>; > interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; > + #address-cells = <1>; > + #size-cells = <0>; > clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; > dmas = <&dma0 > (AT91_XDMAC_DT_MEM_IF(0) | > @@ -394,6 +398,8 @@ i2c11: i2c@600 { > compatible = "microchip,sam9x60-i2c"; > reg = <0x600 0x200>; > interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; > + #address-cells = <1>; > + #size-cells = <0>; > clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; > dmas = <&dma0 > (AT91_XDMAC_DT_MEM_IF(0) | > @@ -443,6 +449,8 @@ i2c12: i2c@600 { > compatible = "microchip,sam9x60-i2c"; > reg = <0x600 0x200>; > interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; > + #address-cells = <1>; > + #size-cells = <0>; > clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; > dmas = <&dma0 > (AT91_XDMAC_DT_MEM_IF(0) | > @@ -600,6 +608,8 @@ i2c6: i2c@600 { > compatible = "microchip,sam9x60-i2c"; > reg = <0x600 0x200>; > interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; > + #address-cells = <1>; > + #size-cells = <0>; > clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; > dmas = <&dma0 > (AT91_XDMAC_DT_MEM_IF(0) | > @@ -649,6 +659,8 @@ i2c7: i2c@600 { > compatible = "microchip,sam9x60-i2c"; > reg = <0x600 0x200>; > interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; > + #address-cells = <1>; > + #size-cells = <0>; > clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; > dmas = <&dma0 > (AT91_XDMAC_DT_MEM_IF(0) | > @@ -698,6 +710,8 @@ i2c8: i2c@600 { > compatible = "microchip,sam9x60-i2c"; > reg = <0x600 0x200>; > interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; > + #address-cells = <1>; > + #size-cells = <0>; > clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; > dmas = <&dma0 > (AT91_XDMAC_DT_MEM_IF(0) | > @@ -766,6 +780,8 @@ i2c0: i2c@600 { > compatible = "microchip,sam9x60-i2c"; > reg = <0x600 0x200>; > interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; > + #address-cells = <1>; > + #size-cells = <0>; > clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; > dmas = <&dma0 > (AT91_XDMAC_DT_MEM_IF(0) | > @@ -834,6 +850,8 @@ i2c1: i2c@600 { > compatible = "microchip,sam9x60-i2c"; > reg = <0x600 0x200>; > interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; > + #address-cells = <1>; > + #size-cells = <0>; > clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; > dmas = <&dma0 > (AT91_XDMAC_DT_MEM_IF(0) | > @@ -902,6 +920,8 @@ i2c2: i2c@600 { > compatible = "microchip,sam9x60-i2c"; > reg = <0x600 0x200>; > interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; > + #address-cells = <1>; > + #size-cells = <0>; > clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; > dmas = <&dma0 > (AT91_XDMAC_DT_MEM_IF(0) | > @@ -970,6 +990,8 @@ i2c3: i2c@600 { > compatible = "microchip,sam9x60-i2c"; > reg = <0x600 0x200>; > interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; > + #address-cells = <1>; > + #size-cells = <0>; > clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; > dmas = <&dma0 > (AT91_XDMAC_DT_MEM_IF(0) | > @@ -1074,6 +1096,8 @@ i2c9: i2c@600 { > compatible = "microchip,sam9x60-i2c"; > reg = <0x600 0x200>; > interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; > + #address-cells = <1>; > + #size-cells = <0>; > clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; > dmas = <&dma0 > (AT91_XDMAC_DT_MEM_IF(0) | > @@ -1123,6 +1147,8 @@ i2c10: i2c@600 { > compatible = "microchip,sam9x60-i2c"; > reg = <0x600 0x200>; > interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; > + #address-cells = <1>; > + #size-cells = <0>; > clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; > dmas = <&dma0 > (AT91_XDMAC_DT_MEM_IF(0) | > > base-commit: 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0