Linux Device Tree
[Prev Page][Next Page]
- Re: [PATCH v2 11/11] clk: qcom: add SAR2130P GPU Clock Controller support
- From: Taniya Das <quic_tdas@xxxxxxxxxxx>
- Re: [PATCH 3/3] perf vendor events arm64: Add i.MX91 DDR Performance Monitor metrics
- From: Xu Yang <xu.yang_2@xxxxxxx>
- Re: [PATCH v10 4/8] coresight: tmc: Enable panic sync handling
- From: Linu Cherian <lcherian@xxxxxxxxxxx>
- Re: [PATCH 2/2] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
- From: Maxime Ripard <mripard@xxxxxxxxxx>
- Re: [PATCH 3/3] mailbox: mediatek: Add mtk-apu-mailbox driver
- From: Karl Li (李智嘉) <Karl.Li@xxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: renesas: white-hawk-cpu: Move avb0 reset gpio to mdio node
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v4 08/13] dt-bindings: display: Document dual-link LVDS display common properties
- From: Liu Ying <victor.liu@xxxxxxx>
- Re: [PATCH v6 3/4] media: raspberrypi: Add support for RP1-CFE
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH v9 4/8] iio: dac: adi-axi-dac: extend features
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 3/3] iio: magnetometer: add Allegro MicroSystems ALS31300 3-D Linear Hall Effect driver
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v16 0/8] Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ
- From: Martin Kepplinger-Novakovic <martink@xxxxxxxxx>
- Re: [PATCH v3 2/3] pwm: imx27: Use clk_bulk_*() API to simplify clock handling
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH RFC v4 01/15] pwm: core: export pwm_get_state_hw()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH v4 08/13] dt-bindings: display: Document dual-link LVDS display common properties
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v2] arm64: dts: x1e80100-crd: describe HID supplies
- From: Johan Hovold <johan+linaro@xxxxxxxxxx>
- Re: [PATCH v2 2/3] ARM: dts: imx: Add devicetree for Kobo Clara 2E
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- RE: [PATCH v4 08/13] dt-bindings: display: Document dual-link LVDS display common properties
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v4 2/3] irqchip: add T-HEAD C900 ACLINT SSWI driver
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: iio: light: veml6075: document rset-ohms
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- Re: [PATCH v1 1/3] dt-bindings: watchdog: Document Qualcomm QCS8300
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH asahi-soc/dt 02/10] dt-bindings: arm: apple: apple,pmgr-pwrstate: Add A7-A11 compatibles
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH asahi-soc/dt 01/10] dt-bindings: arm: apple: apple,pmgr: Add A7-A11 compatibles
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 6/6] iio: dac: ad5791: Use devm_iio_device_register
- From: ahaslam@xxxxxxxxxxxx
- [PATCH 5/6] iio: dac: ad5791: Use devm_regulator_get_enable_read_voltage
- From: ahaslam@xxxxxxxxxxxx
- [PATCH 4/6] iio: dac: ad5791: Add reset, clr and ldac gpios
- From: ahaslam@xxxxxxxxxxxx
- [PATCH 3/6] iio: dac: ad5791: Include chip_info in device match tables
- From: ahaslam@xxxxxxxxxxxx
- [PATCH 2/6] dt-bindings: iio: dac: ad5791: Add required voltage supplies
- From: ahaslam@xxxxxxxxxxxx
- [PATCH 1/6] dt-bindings: iio: dac: ad5791: Add optional reset, clr and ldac gpios
- From: ahaslam@xxxxxxxxxxxx
- [PATCH 0/6] Improvements and Enhancements for AD5791 DAC Driver
- From: ahaslam@xxxxxxxxxxxx
- Re: [PATCH] dt-bindings: power: fsl,imx-gpc: Document fsl,imx6sll-gpc
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: iio: adc: adi,ad7124: Use symbolic name for interrupt flag
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 2/4] ASoC: dt-bindings: document the adau1373 Codec
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 08/13] dt-bindings: display: Document dual-link LVDS display common properties
- From: Liu Ying <victor.liu@xxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: iio: light: veml6075: document rset-ohms
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- RE: [PATCH v4 08/13] dt-bindings: display: Document dual-link LVDS display common properties
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v3 03/12] dt-bindings: pci: Add common schema for devices accessible through PCI BARs
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: usb: add TUSB73x0 PCIe
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- Re: [PATCH v3 02/12] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v5 0/2] USB: xhci: add support for PWRON polarity invert (TI TUSB73x0)
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- [PATCH v5 1/2] dt-bindings: usb: add TUSB73x0 PCIe
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- [PATCH v5 2/2] USB: xhci: add support for PWRON active high
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- Re: [PATCH v3 01/12] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- Re: [EXT] Re: [PATCH v18 3/8] dt-bindings: display: bridge: Add Cadence MHDP8501
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v6 2/7] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()
- From: kernel test robot <lkp@xxxxxxxxx>
- RE: [EXT] Re: [PATCH v18 3/8] dt-bindings: display: bridge: Add Cadence MHDP8501
- From: Sandor Yu <sandor.yu@xxxxxxx>
- RE: [PATCH v4 08/13] dt-bindings: display: Document dual-link LVDS display common properties
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v4 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 08/13] dt-bindings: display: Document dual-link LVDS display common properties
- From: Liu Ying <victor.liu@xxxxxxx>
- Re: [PATCH v4 13/16] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4] dt-bindings: power: Convert raspberrypi,bcm2835-power to Dt schema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: usb: add TUSB73x0 PCIe
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/2] input: keypad: add new keypad driver for MA35D1
- From: Ming-Jen Chen <mjchen0829@xxxxxxxxx>
- Re: [PATCH v1 05/10] media: platform: mediatek: add isp_7x camsys unit
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v8 10/13] dt-bindings: mips: cpu: Add property for broken HCI information
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 9/9] arm64: dts: ti: k3-am62p-mcu: Mark mcu_mcan0/1 as wakeup-source
- From: Dhruva Gole <d-gole@xxxxxx>
- Re: [PATCH v10 4/8] coresight: tmc: Enable panic sync handling
- From: Linu Cherian <lcherian@xxxxxxxxxxx>
- Re: [PATCH v5 8/9] arm64: dts: ti: k3-am62a-mcu: Mark mcu_mcan0/1 as wakeup-source
- From: Dhruva Gole <d-gole@xxxxxx>
- Re: [PATCH v5 7/9] arm64: dts: ti: k3-am62: Mark mcu_mcan0/1 as wakeup-source
- From: Dhruva Gole <d-gole@xxxxxx>
- Re: [PATCH v5 2/9] dt-bindings: can: m_can: Add vio-supply
- From: Dhruva Gole <d-gole@xxxxxx>
- RE: [PATCH v4 08/13] dt-bindings: display: Document dual-link LVDS display common properties
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v5 1/9] dt-bindings: can: m_can: Add wakeup properties
- From: Dhruva Gole <d-gole@xxxxxx>
- Re: [PATCH v18 3/8] dt-bindings: display: bridge: Add Cadence MHDP8501
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH] arm64: dts: mediatek: mt6358: fix dtbs_check error
- From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
- Re: [PATCH v1 05/10] media: platform: mediatek: add isp_7x camsys unit
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: cpufreq: cpufreq-qcom-hw: Add SAR2130P compatible
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH v7 0/2] Improve VM CPUfreq and task placement behavior
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH 4/4] reset: mediatek: Add reset control driver for SMI
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/4] memory: mtk-smi: mt8188: Add SMI clamp function
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/6] dt-bindings: iio: dac: ad5791: Add required voltage supplies
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/4] ASoC: dt-bindings: mediatek,mt8188-mt6359: Update DAI link node pattern
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v10 4/8] coresight: tmc: Enable panic sync handling
- From: Linu Cherian <lcherian@xxxxxxxxxxx>
- Re: [PATCH v10 5/8] coresight: tmc: Add support for reading crash data
- From: Linu Cherian <lcherian@xxxxxxxxxxx>
- Re: [PATCH v4 08/13] dt-bindings: display: Document dual-link LVDS display common properties
- From: Liu Ying <victor.liu@xxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
- From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
- [PATCH v18 8/8] arm64: dts: imx8mq: tqma8mq-mba8mx: Enable HDMI support
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- [PATCH v18 7/8] arm64: dts: imx8mq: Add DCSS + HDMI/DP display pipeline
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- [PATCH v18 6/8] phy: freescale: Add DisplayPort/HDMI Combo-PHY driver for i.MX8MQ
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- [PATCH v18 5/8] dt-bindings: phy: Add Freescale iMX8MQ DP and HDMI PHY
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- [PATCH v18 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- [PATCH v18 3/8] dt-bindings: display: bridge: Add Cadence MHDP8501
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- [PATCH v18 2/8] phy: Add HDMI configuration options
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- [PATCH v18 1/8] drm: bridge: Cadence: Create MHDP helper driver
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- [PATCH v18 0/8] Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ
- From: Sandor Yu <Sandor.yu@xxxxxxx>
- Re: [PATCH 2/3] dt-bindings: arm: rockchip: add Banana Pi BPI-P2 Pro board
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- [PATCH] docs: dt: unittest: Correct SELFTEST to UNITTEST
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- Re: [PATCH v1 06/10] media: platform: mediatek: add isp_7x utility
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH 1/1] RFC: dt bindings: Add property "brcm,gen3-eq-presets"
- From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
- Re: [PATCH net-next v1 5/5] net: dsa: microchip: add support for side MDIO interface in LAN937x
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH v6 2/7] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v12 4/8] mtd: nand: Add qpic_common API file
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- Re: [PATCH v12 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
- From: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: pinctrl: Add pinctrl for Sophgo SG2042 series SoC
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- Re: [PATCH net-next v1 5/5] net: dsa: microchip: add support for side MDIO interface in LAN937x
- From: <Arun.Ramadoss@xxxxxxxxxxxxx>
- Re: [PATCH] riscv: dts: sophgo: Add ethernet configuration for cv18xx
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- Re: [PATCH 2/3] pinctrl: sophgo: add support for SG2042 SoC
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- [PATCH v1 1/3] dt-bindings: watchdog: Document Qualcomm QCS8300
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- [PATCH v1 3/3] arm64: dts: qcom: qcs8300-ride: Add watchdog node
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- [PATCH v1 0/3] Enable Watchdog on QCS8300
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- [PATCH v1 2/3] arm64: dts: qcom: qcs8300: Add watchdog node
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- [PATCH v3 2/2] dt-bindings: net: qcom,ethqos: add description for qcs8300
- From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: net: qcom,ethqos: add description for qcs615
- From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
- [PATCH v3 0/2] Add ethernet dts schema for qcs615/qcs8300
- From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
- Re: [PATCH 1/4] ASoC: dt-bindings: mediatek,mt8188-mt6359: Add adsp and dai-link properties
- From: Trevor Wu (吳文良) <Trevor.Wu@xxxxxxxxxxxx>
- Re: [PATCH 2/3] pinctrl: sophgo: add support for SG2042 SoC
- From: Chen Wang <unicorn_wang@xxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: Add coresight nodes for QCS8300
- From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
- Re: [PATCH] riscv: dts: sophgo: Add ethernet configuration for cv18xx
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v6 0/5] Coresight: Add Coresight TMC Control Unit driver
- From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
- Re: [PATCH v4 00/13] Add ITE IT6263 LVDS to HDMI converter support
- From: Liu Ying <victor.liu@xxxxxxx>
- Re: [PATCH v1 05/10] media: platform: mediatek: add isp_7x camsys unit
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v2 1/2] hwmon: (pwm-fan) add option to leave fan on shutdown
- From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
- RE: [PATCH v2 1/3] ARM: dts: aspeed: Add WDT controller into alias field
- From: Chin-Ting Kuo <chin-ting_kuo@xxxxxxxxxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/3] Add ethernet dts schema for qcs615/qcs8300
- From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
- Re: [PATCH RFC 2/3] rust: Add bindings for device properties
- From: Alex Gaynor <alex.gaynor@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: input: Add Nuvoton MA35D1 keypad
- From: Ming-Jen Chen <mjchen0829@xxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: pinctrl: Add pinctrl for Sophgo SG2042 series SoC
- From: Chen Wang <unicorn_wang@xxxxxxxxxxx>
- [PATCH 3/3] hwmon: (pmbus/ltc2978) add support for ltc7841
- From: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx>
- [PATCH 2/3] hwmon: (pmbus/ltc7841) add support for LTC7841 - docs
- From: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx>
- [PATCH 1/3] dt-bindings: hwmon: ltc2978: add support for ltc7841
- From: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx>
- [PATCH 0/3] add support for LTC7841 boost controller
- From: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx>
- [PATCH] dt-bindings: pinctrl: correct typo of description for cv1800
- From: Chen Wang <unicornxw@xxxxxxxxx>
- [PATCH asahi-soc/dt 10/10] arm64: dts: apple: t8015: Add PMGR nodes
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH asahi-soc/dt 09/10] arm64: dts: apple: t8011: Add PMGR nodes
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH asahi-soc/dt 08/10] arm64: dts: apple: t8010: Add PMGR nodes
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH asahi-soc/dt 07/10] arm64: dts: apple: s8001: Add PMGR nodes
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH asahi-soc/dt 06/10] arm64: dts: apple: s8000: Add PMGR nodes
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH asahi-soc/dt 05/10] arm64: dts: apple: t7001: Add PMGR node
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH asahi-soc/dt 04/10] arm64: dts: apple: t7000: Add PMGR node
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH asahi-soc/dt 03/10] arm64: dts: apple: s5l8960x: Add PMGR node
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH asahi-soc/dt 02/10] dt-bindings: arm: apple: apple,pmgr-pwrstate: Add A7-A11 compatibles
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH asahi-soc/dt 01/10] dt-bindings: arm: apple: apple,pmgr: Add A7-A11 compatibles
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH asahi-soc/dt 00/10] Add PMGR nodes for Apple A7-A11 SoCs
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- Re: [PATCH 2/3] pinctrl: sophgo: add support for SG2042 SoC
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- Re: [PATCH 1/1] arm64: dts: imx8qm-mek: add audio-codec cs42888 and related nodes
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- Re: [PATCH v2 1/3] ARM: dts: aspeed: Add WDT controller into alias field
- From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] riscv: dts: sophgo: fix pinctrl base-address
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- Re: [PATCH] riscv: dts: sophgo: fix pinctrl base-address
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- Re: [PATCH] riscv: dts: sophgo: fix pinctrl base-address
- From: Chen Wang <unicorn_wang@xxxxxxxxxxx>
- Re: [PATCH 2/6] dt-bindings: iio: dac: ad5791: Add required voltage supplies
- From: Axel Haslam <ahaslam@xxxxxxxxxxxx>
- Re: [PATCH v5 4/4] clk: eyeq: add driver
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH] riscv: dts: sophgo: Add ethernet configuration for cv18xx
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- Re: [PATCH RFC 2/3] rust: Add bindings for device properties
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v3 08/12] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 08/12] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 1/1] arm64: dts: imx8qm-mek: add audio-codec cs42888 and related nodes
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v9 8/8] iio: dac: adi-axi-dac: add registering of child fdt node
- From: Angelo Dureghello <angelo@xxxxxxxxxxxxxxxx>
- [PATCH v9 7/8] iio: dac: ad3552r: add high-speed platform driver
- From: Angelo Dureghello <angelo@xxxxxxxxxxxxxxxx>
- [PATCH v9 4/8] iio: dac: adi-axi-dac: extend features
- From: Angelo Dureghello <angelo@xxxxxxxxxxxxxxxx>
- [PATCH v9 5/8] iio: dac: ad3552r: changes to use FIELD_PREP
- From: Angelo Dureghello <angelo@xxxxxxxxxxxxxxxx>
- [PATCH v9 3/8] iio: backend: extend features
- From: Angelo Dureghello <angelo@xxxxxxxxxxxxxxxx>
- [PATCH v9 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
- From: Angelo Dureghello <angelo@xxxxxxxxxxxxxxxx>
- [PATCH v9 1/8] dt-bindings: iio: dac: ad3552r: add iio backend support
- From: Angelo Dureghello <angelo@xxxxxxxxxxxxxxxx>
- [PATCH v9 0/8] iio: add support for the ad3552r AXI DAC IP
- From: Angelo Dureghello <angelo@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] usb: hub: add infrastructure to pass onboard_dev port features
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH v9 6/8] iio: dac: ad3552r: extract common code (no changes in behavior intended)
- From: Angelo Dureghello <angelo@xxxxxxxxxxxxxxxx>
- [PATCH 3/3] arm64: dts: rockchip: add Banana Pi BPI-P2 Pro board
- From: Dmitry Yashin <dmt.yashin@xxxxxxxxx>
- [PATCH 2/3] dt-bindings: arm: rockchip: add Banana Pi BPI-P2 Pro board
- From: Dmitry Yashin <dmt.yashin@xxxxxxxxx>
- [PATCH 1/3] ASoC: dt-bindings: rockchip,rk3308-codec: add port property
- From: Dmitry Yashin <dmt.yashin@xxxxxxxxx>
- [PATCH 0/3] arm64: dts: rockchip: add Banana Pi BPI-P2 Pro board
- From: Dmitry Yashin <dmt.yashin@xxxxxxxxx>
- Re: [PATCH 2/2] pinctrl: qcom: Add sm8750 pinctrl driver
- From: Melody Olvera <quic_molvera@xxxxxxxxxxx>
- Re: [PATCH v7 4/5] arm64: dts: qcom: Add PSCI SYSTEM_RESET2 types for qcm6490-idp
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
- Re: [PATCH v7 0/2] Improve VM CPUfreq and task placement behavior
- From: Saravana Kannan <saravanak@xxxxxxxxxx>
- Re: [PATCH v3 11/12] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v3 3/6] iio: light: stk3310: Implement vdd and leda supplies
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH v3 0/6] iio: light: stk3310: support powering off during suspend
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 3/6] iio: light: stk3310: Implement vdd and leda supplies
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 6/6] iio: dac: ad5791: Use devm_iio_device_register
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v4 16/16] net: stmmac: dwmac-s32: Read PTP clock rate when ready
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v4 15/16] MAINTAINERS: Add Jan Petrous as the NXP S32G/R DWMAC driver maintainer
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v4 12/16] net: dwmac-sti: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v4 13/16] dt-bindings: net: Add DT bindings for DWMAC on NXP S32G/R SoCs
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v4 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R glue driver
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v4 08/16] net: dwmac-rk: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v4 07/16] net: dwmac-intel-plat: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v4 10/16] net: macb: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v4 11/16] net: xgene_enet: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v4 09/16] net: dwmac-starfive: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v4 05/16] net: dwmac-dwc-qos-eth: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v4 06/16] net: dwmac-imx: Use helper rgmii_clock
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v4 03/16] net: stmmac: Fix clock rate variables size
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v4 00/16] Add support for Synopsis DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v4 02/16] net: driver: stmmac: Extend CSR calc support
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v4 04/16] net: phy: Add helper for mapping RGMII link speed to clock rate
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- [PATCH v4 01/16] net: driver: stmmac: Fix CSR divider comment
- From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@xxxxxxxxxx>
- Re: [PATCH 3/6] iio: dac: ad5791: Include chip_info in device match tables
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 04/16] net: phy: Add helper for mapping RGMII link speed to clock rate
- From: Jan Petrous <jan.petrous@xxxxxxxxxxx>
- Re: [PATCH v4 0/4] Add i2c driver for Bosch BMI260 IMU
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/4] iio: imu: bmi270: Add scale and sampling frequency to BMI270 IMU
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 1/4] iio: imu: bmi270: Add triggered buffer for Bosch BMI270 IMU
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 03/10] irqchip: Add Broadcom bcm2712 MSI-X interrupt controller
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
- Re: [PATCH v8 7/8] iio: dac: ad3552r: add high-speed platform driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 0/6] Add Nothing Phone (1) support
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- [PATCH 2/2] arm64: dts: imx8-ss-audio: add fallback compatible string fsl,imx6ull-esai for esai
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 1/2] ASoC: dt-bindings: fsl-esai: allow fsl,imx8qm-esai fallback to fsl,imx6ull-esai
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 0/2] ASoC: fsl-esai: allow fsl,imx8qm-esai fallback to fsl,imx6ull-esai
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH 2/2] ARM: dts: imx6sx: Remove fsl,imx6sx-lcdif fallback
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH v8 04/13] irqchip/mips-gic: Multi-cluster support
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
- Re: [PATCH v8 7/8] iio: dac: ad3552r: add high-speed platform driver
- From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
- [PATCH v6 7/7] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 6/7] PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext()
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 5/7] dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 4/7] PCI: imx6: Remove cpu_addr_fixup()
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 3/7] PCI: dwc: ep: Add bus_addr_base for outbound window
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 2/7] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 1/7] of: address: Add parent_bus_addr to struct of_pci_range
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v6 0/7] PCI: dwc: opitimaze RC Host/EP pci_fixup_addr()
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH] arm64: dts: renesas: white-hawk-cpu: Move avb0 reset gpio to mdio node
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v7 3/5] firmware: psci: Read and use vendor reset types
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: adi,ad7124: Allow specifications of a gpio for irq line
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/1] RFC: dt bindings: Add property "brcm,gen3-eq-presets"
- From: James Quinlan <james.quinlan@xxxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: imx6sx: Remove fsl,imx6sx-lcdif fallback
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH 4/6] iio: dac: ad5791: Add reset, clr and ldac gpios
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH v7 0/5] Implement vendor resets for PSCI SYSTEM_RESET2
- From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
- [PATCH v7 5/5] arm64: dts: qcom: Add PSCI SYSTEM_RESET2 types for sa8775p-ride
- From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
- [PATCH v7 3/5] firmware: psci: Read and use vendor reset types
- From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
- [PATCH v7 4/5] arm64: dts: qcom: Add PSCI SYSTEM_RESET2 types for qcm6490-idp
- From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
- [PATCH v7 1/5] dt-bindings: power: reset: Convert mode-.* properties to array
- From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
- [PATCH v7 2/5] dt-bindings: arm: Document reboot mode magic
- From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
- Re: [PATCH v7 4/4] arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH 5/6] iio: dac: ad5791: Use devm_regulator_get_enable_read_voltage
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 2/2] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
- From: Herve Codina <herve.codina@xxxxxxxxxxx>
- Re: [PATCH v29 01/33] xhci: support setting interrupt moderation IMOD for secondary interrupters
- From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
- [PATCH 2/2] ARM: dts: imx6sx: Remove fsl,imx6sx-lcdif fallback
- From: Fabio Estevam <festevam@xxxxxxxxx>
- [PATCH 1/2] ARM: dts: imx6sl: Fix lcdif compatible fallback
- From: Fabio Estevam <festevam@xxxxxxxxx>
- [PATCH v8 13/13] irqchip: mips-gic: Handle case with cluster without CPU cores
- From: Aleksandar Rikalo <arikalo@xxxxxxxxx>
- [PATCH v8 12/13] MIPS: mobileye: dts: eyeq6h: Enable cluster support
- From: Aleksandar Rikalo <arikalo@xxxxxxxxx>
- [PATCH v8 11/13] MIPS: CPS: Support broken HCI for multicluster
- From: Aleksandar Rikalo <arikalo@xxxxxxxxx>
- [PATCH v8 10/13] dt-bindings: mips: cpu: Add property for broken HCI information
- From: Aleksandar Rikalo <arikalo@xxxxxxxxx>
- [PATCH v8 09/13] MIPS: CPS: Boot CPUs in secondary clusters
- From: Aleksandar Rikalo <arikalo@xxxxxxxxx>
- [PATCH v8 08/13] MIPS: CPS: Introduce struct cluster_boot_config
- From: Aleksandar Rikalo <arikalo@xxxxxxxxx>
- [PATCH v8 07/13] MIPS: pm-cps: Use per-CPU variables as per-CPU, not per-core
- From: Aleksandar Rikalo <arikalo@xxxxxxxxx>
- [PATCH v8 06/13] clocksource: mips-gic-timer: Enable counter when CPUs start
- From: Aleksandar Rikalo <arikalo@xxxxxxxxx>
- [PATCH v8 04/13] irqchip/mips-gic: Multi-cluster support
- From: Aleksandar Rikalo <arikalo@xxxxxxxxx>
- [PATCH v8 05/13] clocksource: mips-gic-timer: Always use cluster 0 counter as clocksource
- From: Aleksandar Rikalo <arikalo@xxxxxxxxx>
- [PATCH v8 03/13] irqchip/mips-gic: Setup defaults in each cluster
- From: Aleksandar Rikalo <arikalo@xxxxxxxxx>
- [PATCH v8 02/13] irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
- From: Aleksandar Rikalo <arikalo@xxxxxxxxx>
- [PATCH v8 01/13] irqchip/mips-gic: Introduce for_each_online_cpu_gic()
- From: Aleksandar Rikalo <arikalo@xxxxxxxxx>
- [PATCH v8 00/13] MIPS: Support I6500 multi-cluster configuration
- From: Aleksandar Rikalo <arikalo@xxxxxxxxx>
- Re: [PATCH] dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v7 4/4] arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 4/5] iio: imu: adis16550: add adis16550 support
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- [PATCH v5 9/9] arm64: dts: ti: k3-am62p-mcu: Mark mcu_mcan0/1 as wakeup-source
- From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
- [PATCH v5 8/9] arm64: dts: ti: k3-am62a-mcu: Mark mcu_mcan0/1 as wakeup-source
- From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
- [PATCH v5 7/9] arm64: dts: ti: k3-am62: Mark mcu_mcan0/1 as wakeup-source
- From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
- [PATCH v5 6/9] can: m_can: Add use of optional regulator
- From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
- [PATCH v5 4/9] can: m_can: Return ERR_PTR on error in allocation
- From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
- [PATCH v5 5/9] can: m_can: Support pinctrl wakeup state
- From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
- [PATCH v5 3/9] can: m_can: Map WoL to device_set_wakeup_enable
- From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
- [PATCH v5 2/9] dt-bindings: can: m_can: Add vio-supply
- From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
- [PATCH v5 1/9] dt-bindings: can: m_can: Add wakeup properties
- From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
- [PATCH v5 0/9] can: m_can: Add am62 wakeup support
- From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
- Re: [PATCH v2] of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v7 4/4] arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3
- From: Josua Mayer <josua@xxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] dt-bindings: mfd: convert zii,rave-sp.txt and child txt to yaml format
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v3 2/2] iio: light: veml6070: add support for integration time
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: iio: light: veml6075: document rset-ohms
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v3 0/2] iio: light: veml6070: add integration time
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- Re: [PATCH 3/5] dt-bindings: iio: Add adis16550 bindings
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: arm,psci: Allow S2RAM power_state parameter description
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 2/5] iio: imu: adis: Add DIAG_STAT register size
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH 1/5] iio: imu: adis: Add custom ops struct
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH 1/5] iio: imu: adis: Add custom ops struct
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: ti: k3-*: Add GPIO INTR region in ranges
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH v3 05/12] PCI: of_property: Assign PCI instead of CPU bus address to dynamic bridge nodes
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- [PATCH v4] dt-bindings: power: Convert raspberrypi,bcm2835-power to Dt schema
- From: Karan Sanghavi <karansanghvi98@xxxxxxxxx>
- Re: [PATCH 13/13] arm64: dts: allwinner: a100: Add CPU Operating Performance Points table
- From: Cody Eksal <masterr3c0rd@epochal.quest>
- Re: [PATCH 03/13] dt-bindings: phy: sun50i-a64: add a100 compatible
- From: Cody Eksal <masterr3c0rd@epochal.quest>
- Re: [PATCH 3/6] iio: dac: ad5791: Include chip_info in device match tables
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH RFC v4 15/15] iio: adc: ad4695: Add support for SPI offload
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 0/4] iio: adc: ad7124: Make it work on de10-nano
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v4 1/4] PCI: dwc: ep: Add bus_addr_base for outbound window
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v3 3/6] iio: light: stk3310: Implement vdd and leda supplies
- From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in cpsw_mac_syscon node
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH RFC v4 11/15] iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_ext2()
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH 07/13] arm64: dts: allwinner: a100: add usb related nodes
- From: Cody Eksal <masterr3c0rd@epochal.quest>
- Re: [PATCH v6 3/4] media: raspberrypi: Add support for RP1-CFE
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 07/13] arm64: dts: allwinner: a100: add usb related nodes
- From: Cody Eksal <masterr3c0rd@epochal.quest>
- Re: [PATCH] dt-bindings: thermal: qcom-tsens: add SAR2130P compatible
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [PATCH v3 12/17] wifi: cc33xx: Add scan.c, scan.h
- From: "Nemanov, Michael" <michael.nemanov@xxxxxx>
- Re: [PATCH 11/13] dt-bindings: opp: h6: Add A100 operating points
- From: Cody Eksal <masterr3c0rd@epochal.quest>
- Re: [PATCH 06/13] phy: sun4i-usb: add support for A100 USB PHY
- From: Cody Eksal <masterr3c0rd@epochal.quest>
- Re: [PATCH v2 2/2] arm64: dts: mediatek: mt6359: fix dtbs_check error for RTC and regulators
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: mfd: mediatek: mt6397: add adc, codec and regulators for mt6359
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH v2 3/4] iio: adc: ad_sigma_delta: Add support for reading irq status using a GPIO
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH v2 4/4] iio: adc: ad7124: Disable all channels at probe time
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH v2 1/4] dt-bindings: iio: adc: adi,ad7124: Use symbolic name for interrupt flag
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH v2 2/4] dt-bindings: iio: adc: adi,ad7124: Allow specifications of a gpio for irq line
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH v2 0/4] iio: adc: ad7124: Make it work on de10-nano
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH 05/13] dt-bindings: usb: sunxi-musb: Add A100 compatible string
- From: Cody Eksal <masterr3c0rd@epochal.quest>
- Re: [PATCH 04/13] dt-bindings: usb: Add A100 compatible string
- From: Cody Eksal <masterr3c0rd@epochal.quest>
- Re: [PATCH v3 1/2] dt-bindings: nvmem: sprd,sc2731-efuse: convert to YAML
- From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
- Re: [PATCH v3 5/6] iio: light: stk3310: log error if reading the chip id fails
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 3/3] soc: qcom: llcc: add support for SAR2130P and SAR1130P
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: rtc: pcf2127: Add nxp,battery-switch-over property
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 2/3] soc: qcom: llcc: use deciman integers for bit shift values
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 4/4] arm64: dts: qcom: qcs615: add the APPS SMMU node
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- [PATCH v2 2/4] ASoC: dt-bindings: document the adau1373 Codec
- From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
- [PATCH v2 4/4] ASoC: codecs: adau1373: add powerdown gpio
- From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
- [PATCH v2 3/4] ASoC: codecs: adau1373: drop patform_data
- From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
- [PATCH v2 1/4] ASoC: codecs: adau1373: add some kconfig text
- From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
- [PATCH v2 0/4] ASoC: codecs: adau1373: drop platform data
- From: Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx>
- Re: [PATCH v3 09/16] rust: add `io::Io` base type
- From: Alice Ryhl <aliceryhl@xxxxxxxxxx>
- Re: [PATCH v9 7/7] arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v2] of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
- From: Will Deacon <will@xxxxxxxxxx>
- Re: [PATCH v5 4/4] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/2] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v6 3/4] media: raspberrypi: Add support for RP1-CFE
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
- Re: [PATCH v7 4/4] arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH v3 5/6] iio: light: stk3310: log error if reading the chip id fails
- From: Aren <aren@xxxxxxxxxxxxxxxxx>
- Re: RE: [PATCH v2 3/4] can: Add driver for CAST CAN Bus Controller
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH v6 3/4] media: raspberrypi: Add support for RP1-CFE
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 4/5] iio: imu: adis16550: add adis16550 support
- From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
- Re: [PATCH v6 0/5] Enable eQEP DT support for Sitara K3 platforms
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH] arm64: dts: ti: k3-am62x-phyboard-lyra: Drop unnecessary McASP AFIFOs
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH] arm64: dts: ti: k3-am62a7-phyboard-lyra-rdk: Update ethernet internal delay
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH v2 0/2] Reconfigure 1.4GHz in AM62 PHYCORE SoM
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH v6 0/5] Introduce J742S2 SoC and EVM
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH 0/4] Add pa-stats Support
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH 0/2] arm64: dts: ti: k3-j784s4-evm: SERDES0 lane cleanup
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH v12 0/5] TI K3 M4F support on AM62 and AM64 SoCs
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: [PATCH 1/2] dt-bindings: net: bluetooth: nxp: add support for supply and reset
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] dt-bindings: hwmon: pwm-fan: add retain-state-shutdown property
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: rtc: pcf2127: Add nxp,battery-switch-over property
- From: Philipp Rosenberger <p.rosenberger@xxxxxxxxxx>
- Re: [PATCH v3 2/6] firmware: ti_sci: Partial-IO support
- From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
- Re: [PATCH v2 2/2] i2c: spacemit: add support for SpacemiT K1 SoC
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 5/6] iio: light: stk3310: log error if reading the chip id fails
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 4/6] iio: light: stk3310: use dev_err_probe where possible
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 2/3] dt-bindings: crypto: Add Inside Secure SafeXcel EIP-93 crypto engine
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: pwm: add atcpit100-pwm
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 3/6] iio: light: stk3310: Implement vdd and leda supplies
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 2/3] dt-bindings: crypto: Add Inside Secure SafeXcel EIP-93 crypto engine
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- [PATCH v3 0/6] iio: light: stk3310: support powering off during suspend
- From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] ASoC: dt-bindings: mediatek,mt8188-mt6359: Add adsp and dai-link properties
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH 3/3] firmware/psci: Allow specifying an S2RAM state through CPU_SUSPEND
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- [PATCH 2/3] firmware/psci: Set pm_set_resume/suspend_via_firmware() for SYSTEM_SUSPEND
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- [PATCH 1/3] dt-bindings: arm,psci: Allow S2RAM power_state parameter description
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- [PATCH 0/3] Allow specifying an S2RAM sleep on pre-SYSTEM_SUSPEND PSCI impls
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- Re: [PATCH v2 2/2] dt-bindings: hwmon: pwm-fan: add retain-state-shutdown property
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v3 6/6] arm64: dts: allwinner: pinephone: Add power supplies to stk3311
- From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
- [PATCH v3 5/6] iio: light: stk3310: log error if reading the chip id fails
- From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
- [PATCH v3 4/6] iio: light: stk3310: use dev_err_probe where possible
- From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
- [PATCH v3 3/6] iio: light: stk3310: Implement vdd and leda supplies
- From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
- [PATCH v3 2/6] iio: light: stk3310: handle all remove logic with devm callbacks
- From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 01/12] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v3 1/6] dt-bindings: iio: light: stk33xx: add vdd and leda regulators
- From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
- Re: RE: [PATCH v2 3/4] can: Add driver for CAST CAN Bus Controller
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 2/4] ASoC: dt-bindings: document the adau1373 Codec
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH 2/2] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v3 10/12] misc: rp1: RaspberryPi RP1 misc driver
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 12/12] arm64: defconfig: Enable RP1 misc/clock/gpio drivers
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 11/12] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 08/12] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 09/12] arm64: dts: rp1: Add support for RaspberryPi's RP1 device
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 06/12] of: address: Preserve the flags portion on 1:1 dma-ranges mapping
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 05/12] PCI: of_property: Assign PCI instead of CPU bus address to dynamic bridge nodes
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 04/12] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 03/12] dt-bindings: pci: Add common schema for devices accessible through PCI BARs
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 01/12] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 02/12] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v3 00/12] Add support for RaspberryPi RP1 PCI device using a DT overlay
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v5 4/4] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC
- From: Luo Jie <quic_luoj@xxxxxxxxxxx>
- [PATCH v5 3/4] arm64: defconfig: Enable Qualcomm IPQ CMN PLL clock controller
- From: Luo Jie <quic_luoj@xxxxxxxxxxx>
- [PATCH v5 2/4] clk: qcom: Add CMN PLL clock controller driver for IPQ SoC
- From: Luo Jie <quic_luoj@xxxxxxxxxxx>
- [PATCH v5 1/4] dt-bindings: clock: qcom: Add CMN PLL clock controller for IPQ SoC
- From: Luo Jie <quic_luoj@xxxxxxxxxxx>
- [PATCH v5 0/4] Add CMN PLL clock controller driver for IPQ9574
- From: Luo Jie <quic_luoj@xxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: clock: axi-clkgen: include AXI clk
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH 2/2] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
- From: Maxime Ripard <mripard@xxxxxxxxxx>
- Re: [PATCH v1 2/2] arm64: dts: imx8mp: add aristainetos3 board support
- From: Heiko Schocher <hs@xxxxxxx>
- Re: [PATCH RFC v4 03/15] spi: offload: add support for hardware triggers
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH 2/2] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
- From: Herve Codina <herve.codina@xxxxxxxxxxx>
- Re: [PATCH RFC v4 06/15] spi: offload-trigger: add PWM trigger driver
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- Re: [PATCH net-next v1 5/5] net: dsa: microchip: add support for side MDIO interface in LAN937x
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH/RFC 0/2] arm64: dts: renesas: Re-add voltages to OPP tables
- From: Lukasz Luba <lukasz.luba@xxxxxxx>
- Re: [PATCH 2/2] pwm: atcpit100: add Andes PWM driver support
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH v8 7/8] iio: dac: ad3552r: add high-speed platform driver
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH 2/2] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 13/16] samples: rust: add Rust PCI sample driver
- From: Danilo Krummrich <dakr@xxxxxxxxxx>
- Re: [PATCH v8 8/8] iio: dac: adi-axi-dac: add registering of child fdt node
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v8 4/8] iio: dac: adi-axi-dac: extend features
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v3 6/7] dt-bindings: firmware: arm,scmi: Add missing vendor string
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- RE: [PATCH 1/2] dt-bindings: net: bluetooth: nxp: add support for supply and reset
- From: Sherry Sun <sherry.sun@xxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 2/3] arm64: dts: qcom: x1e80100: Describe TLMM pins for SDC2
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH] riscv: dts: sophgo: Add ethernet configuration for cv18xx
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v1] arm64: dts: qcom: qcs615: Add QUPv3 configuration
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: pwm: add atcpit100-pwm
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH 2/3] pinctrl: sophgo: add support for SG2042 SoC
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v7 0/2] Improve VM CPUfreq and task placement behavior
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- Re: [PATCH v2 2/2] i2c: spacemit: add support for SpacemiT K1 SoC
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3] dt-bindings: pinctrl: convert pinctrl-mcp23s08.txt to yaml format
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v4 5/5] drm/panel: samsung-s6e88a0-ams427ap24: Add flip option
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v4 4/5] drm/panel: samsung-s6e88a0-ams427ap24: Add brightness control
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v4 3/5] drm/panel: samsung-s6e88a0-ams427ap24: Add initial driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] dt-bindings: power: fsl,imx-gpc: Document fsl,imx6sll-gpc
- From: Fabio Estevam <festevam@xxxxxxxxx>
- [PATCH] ARM: dts: imx6sll: Improve gpc description
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH v1 2/2] arm64: dts: imx8mp: add aristainetos3 board support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v7 0/2] Improve VM CPUfreq and task placement behavior
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- [PATCH v5 3/3] crypto: Add Mediatek EIP-93 crypto engine support
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- [PATCH v5 2/3] dt-bindings: crypto: Add Inside Secure SafeXcel EIP-93 crypto engine
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- [PATCH v5 1/3] spinlock: extend guard with spinlock_bh variants
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH v2 2/2] dt-bindings: hwmon: pwm-fan: add retain-state-shutdown property
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- [PATCH 5/5] docs: iio: add documentation for adis16550 driver
- From: Robert Budai <robert.budai@xxxxxxxxxx>
- [PATCH 4/5] iio: imu: adis16550: add adis16550 support
- From: Robert Budai <robert.budai@xxxxxxxxxx>
- [PATCH 3/5] dt-bindings: iio: Add adis16550 bindings
- From: Robert Budai <robert.budai@xxxxxxxxxx>
- [PATCH 0/5] Add support for ADIS16550 and ADIS16550W
- From: Robert Budai <robert.budai@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: imx8mp-navqp: Add HDMI support
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH v7 0/2] Improve VM CPUfreq and task placement behavior
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- Re: [PATCH v1] arm64: dts: qcom: qcs615: Add QUPv3 configuration
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH net-next v5 2/2] net: stmmac: Add glue layer for T-HEAD TH1520 SoC
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH 2/2] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH net-next v5 1/2] dt-bindings: net: Add T-HEAD dwmac support
- From: Andrew Lunn <andrew@xxxxxxx>
- [PATCH 2/5] iio: imu: adis: Add DIAG_STAT register size
- From: Robert Budai <robert.budai@xxxxxxxxxx>
- [PATCH 1/5] iio: imu: adis: Add custom ops struct
- From: Robert Budai <robert.budai@xxxxxxxxxx>
- [PATCH 0/5] Add support for ADIS16550 and ADIS16550W
- From: Robert Budai <robert.budai@xxxxxxxxxx>
- Re: [PATCH v3 6/7] dt-bindings: firmware: arm,scmi: Add missing vendor string
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- Re: [PATCH 2/2] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
- From: Maxime Ripard <mripard@xxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: qcom: qcs615: Add QUPv3 configuration
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 00/13] Add ITE IT6263 LVDS to HDMI converter support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH net-next v1 5/5] net: dsa: microchip: add support for side MDIO interface in LAN937x
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH net-next v1 2/5] dt-bindings: net: dsa: ksz: add mdio-parent-bus property for internal MDIO
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH net-next v1 1/5] dt-bindings: net: dsa: ksz: add internal MDIO bus description
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH net-next v1 4/5] net: dsa: microchip: cleanup error handling in ksz_mdio_register
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH net-next v1 3/5] net: dsa: microchip: Refactor MDIO handling for side MDIO access
- From: Andrew Lunn <andrew@xxxxxxx>
- [PATCH v3 6/7] dt-bindings: firmware: arm,scmi: Add missing vendor string
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- [PATCH v3 3/7] dt-bindings: firmware: arm,scmi: Introduce more transport properties
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- Re: [PATCH 1/2] dt-bindings: net: bluetooth: nxp: add support for supply and reset
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [PATCH v7 0/2] Improve VM CPUfreq and task placement behavior
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- Re: [PATCH v2 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH/RFC 0/2] arm64: dts: renesas: Re-add voltages to OPP tables
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: qcom: qcs615: Add QUPv3 configuration
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v1] arm64: dts: qcom: qcs615: Add QUPv3 configuration
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v6 3/4] media: raspberrypi: Add support for RP1-CFE
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH 2/2] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v6 3/4] media: raspberrypi: Add support for RP1-CFE
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
- Re: [PATCH v1 2/2] arm64: dts: imx8mp: add aristainetos3 board support
- From: Heiko Schocher <hs@xxxxxxx>
- [PATCH v2] arm64: dts: qcom: qcs615: Add QUPv3 configuration
- From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
- Re: [PATCH v1] arm64: dts: qcom: qcs615: Add QUPv3 configuration
- From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: mediatek: Introduce MT8188 Geralt platform based Ciri
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- Re: [PATCH 4/4] ASoC: dt-bindings: maxim,max98390: Document maxim,dsm_param_name property
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- Re: [PATCH 3/4] ASoC: dt-bindings: maxim,max98390: Refernce common DAI properties
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- Re: [PATCH v6 3/4] media: raspberrypi: Add support for RP1-CFE
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH 2/4] ASoC: dt-bindings: mediatek,mt8188-mt6359: Update DAI link node pattern
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- RE: [PATCH v4 00/13] Add ITE IT6263 LVDS to HDMI converter support
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] ASoC: dt-bindings: mediatek,mt8188-mt6359: Add adsp and dai-link properties
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: display: mediatek: dp: Add #sound-dai-cells property
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- Re: [PATCH RFC v4 11/15] iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_ext2()
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v6 3/4] media: raspberrypi: Add support for RP1-CFE
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/3] Add ethernet dts schema for qcs615/qcs8300
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v4 1/2] dt-bindings: usb: add TUSB73x0 PCIe
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- [PATCH v4 0/2] USB: xhci: add support for PWRON polarity invert (TI TUSB73x0)
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- [PATCH v4 2/2] USB: xhci: add support for PWRON active high
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- Re: [RFC PATCH 00/10] Support simple-framebuffer on imx8m
- From: Maxime Ripard <mripard@xxxxxxxxxx>
- Re: [PATCH v2] of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
- From: Usama Arif <usamaarif642@xxxxxxxxx>
- Re: [PATCH v1 2/2] arm64: dts: imx8mp: add aristainetos3 board support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v7 2/2] cpufreq: add virtual-cpufreq driver
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: pinctrl: Add support for Amlogic A4 SoCs
- From: neil.armstrong@xxxxxxxxxx
- [PATCH 2/2] pwm: atcpit100: add Andes PWM driver support
- From: Ben Zong-You Xie <ben717@xxxxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: pwm: add atcpit100-pwm
- From: Ben Zong-You Xie <ben717@xxxxxxxxxxxxx>
- [PATCH 0/2] pwm: add PWM driver for atcpit100
- From: Ben Zong-You Xie <ben717@xxxxxxxxxxxxx>
- Re: [PATCH v1 2/2] arm64: dts: imx8mp: add aristainetos3 board support
- From: Heiko Schocher <hs@xxxxxxx>
- [PATCH] riscv: dts: sophgo: fix pinctrl base-address
- From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
- Re: [PATCH v2 14/14] arm64: defconfig: Enable RP1 misc/clock/gpio drivers
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: clock: imx8m-anatop: support spread spectrum clocking
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH 09/10] dt-bindings: lcdif: add 'fsl,boot-on' property
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH 07/10] dt-bindings: bridge: samsung-dsim: add 'samsung,boot-on' property
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH 05/10] dt-bindings: display: panel: add 'syna,boot-on' property
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH 03/10] dt-bindings: power: gpcv2: add 'fsl,boot-on' property
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH 01/10] dt-bindings: soc: imx-blk-ctrl: add 'fsl,power-domains-boot-on' property
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH 00/10] Support simple-framebuffer on imx8m
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 5/5] arm: dts: qcom-ipq5018-linksys-jamaica: Include dts from arm64
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v1 2/2] arm64: dts: imx8mp: add aristainetos3 board support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 11/16] rust: pci: add basic PCI device / driver abstractions
- From: Danilo Krummrich <dakr@xxxxxxxxxx>
- Re: [PATCH v1 1/2] dt-bindings: arm: fsl: Add ABB SoM and carrier
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 00/13] Add ITE IT6263 LVDS to HDMI converter support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Danilo Krummrich <dakr@xxxxxxxxxx>
- Re: [PATCH v5 0/2] dt-bindings: hwmon: pmbus: add bindings for isl68137
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Danilo Krummrich <dakr@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: renesas: white-hawk-cpu: Move avb0 reset gpio to mdio node
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v6 3/4] media: raspberrypi: Add support for RP1-CFE
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- RE: [PATCH 1/2] dt-bindings: net: bluetooth: nxp: add support for supply and reset
- From: Sherry Sun <sherry.sun@xxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: pinctrl: Add support for Amlogic A4 SoCs
- From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
- Re: [PATCH v2 11/14] misc: rp1: RaspberryPi RP1 misc driver
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: adi,ad7124: Allow specifications of a gpio for irq line
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: pinctrl: Add support for Amlogic A4 SoCs
- From: neil.armstrong@xxxxxxxxxx
- Re: [PATCH v3 2/3] pinctrl: meson: Add driver support for Amlogic A4 SoCs
- From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v10 4/8] coresight: tmc: Enable panic sync handling
- From: Linu Cherian <lcherian@xxxxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: pinctrl: Add support for Amlogic A4 SoCs
- From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
- Re: [PATCH v4 2/4] iio: imu: bmi270: Add scale and sampling frequency to BMI270 IMU
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 16/16] samples: rust: add Rust platform sample driver
- From: Danilo Krummrich <dakr@xxxxxxxxxx>
- Re: [PATCH v4 1/4] iio: imu: bmi270: Add triggered buffer for Bosch BMI270 IMU
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 4/4] iio: imu: bmi270: Add support for BMI260
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v4 09/10] arm64: dts: exynos: Add Exynos9810 SoC support
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v4 10/10] arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F)
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v4 08/10] pinctrl: samsung: Add Exynos9810 SoC specific data
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v4 07/10] soc: samsung: exynos-chipid: Add support for Exynos9810 SoC
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v4 05/10] dt-bindings: soc: samsung: exynos-pmu: Add exynos9810 compatible
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v4 06/10] dt-bindings: arm: samsung: Document Exynos9810 and starlte board binding
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v4 04/10] dt-bindings: pinctrl: samsung: Add compatible for exynos9810-wakeup-eint
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v4 03/10] dt-bindings: pinctrl: samsung: Add compatible for Exynos9810 SoC
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v4 02/10] dt-bindings: hwinfo: samsung,exynos-chipid: Add Samsung exynos9810 compatible
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v4 01/10] dt-bindings: arm: cpus: Add Samsung Mongoose M3
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v4 00/10] Add support for Exynos9810 SoC and Samsung Galaxy S9 (SM-G960F)
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- Re: [PATCH v4 13/13] MAINTAINERS: Add maintainer for ITE IT6263 driver
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v6 3/4] media: raspberrypi: Add support for RP1-CFE
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 10/13] drm/bridge: Add ITE IT6263 LVDS to HDMI converter
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/2] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
- From: Maxime Ripard <mripard@xxxxxxxxxx>
- Re: [PATCH v8 7/8] iio: dac: ad3552r: add high-speed platform driver
- From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
- Re: [PATCH v9 7/7] arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH net] dt-bindings: net: xlnx,axi-ethernet: Correct phy-mode property value
- From: Suraj Gupta <suraj.gupta2@xxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: pinctrl: Add support for Amlogic A4 SoCs
- From: neil.armstrong@xxxxxxxxxx
- Re: [PATCH v3 1/3] dt-bindings: pinctrl: Add support for Amlogic A4 SoCs
- From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
- Re: [PATCH v3 10/10] arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F)
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: net: bluetooth: nxp: add support for supply and reset
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [PATCH v4 3/3] crypto: Add Mediatek EIP-93 crypto engine support
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v3 2/2] mtd: spi-nor: support vcc-supply regulator
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port
- From: Soutrik Mukhopadhyay <quic_mukhopad@xxxxxxxxxxx>
- Re: [PATCH v3 2/3] arm64: dts: qcom: x1e80100: Describe TLMM pins for SDC2
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- Re: [PATCH v4 3/3] crypto: Add Mediatek EIP-93 crypto engine support
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v4 3/3] crypto: Add Mediatek EIP-93 crypto engine support
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCHv3 20/22] ARM: dts: socfpga: removal of generic PE1 dts
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
- From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
- Re: [PATCH V4 4/5] soc: qcom: Introduce SCMI based Memlat (Memory Latency) governor
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- Re: [PATCH 3/3] remoteproc: qcom: pas: enable SAR2130P audio DSP support
- From: neil.armstrong@xxxxxxxxxx
- Re: [PATCH 2/3] remoteproc: qcom: pas: add minidump_id to SM8350 resources
- From: neil.armstrong@xxxxxxxxxx
- [PATCH v7 5/5] riscv: dts: starfive: add DeepComputing FML13V01 board device tree
- From: Guodong Xu <guodong@xxxxxxxxxxxx>
- [PATCH v7 4/5] dt-bindings: riscv: starfive: add deepcomputing,fml13v01
- From: Guodong Xu <guodong@xxxxxxxxxxxx>
- Re: [PATCH 2/2] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- [PATCH v7 3/5] dt-bindings: vendor: add deepcomputing
- From: Guodong Xu <guodong@xxxxxxxxxxxx>
- [PATCH v7 2/5] riscv: dts: starfive: jh7110-common: move usb0 config to board dts
- From: Guodong Xu <guodong@xxxxxxxxxxxx>
- [PATCH v7 1/5] riscv: dts: starfive: jh7110-common: revised device node
- From: Guodong Xu <guodong@xxxxxxxxxxxx>
- [PATCH v7 0/5] Add DeepComputing FML13V01 board dts
- From: Guodong Xu <guodong@xxxxxxxxxxxx>
- [PATCH] arm64: dts: ti: k3-j722s-evm: Add pinmux for RPi Header
- From: Bhavya Kapoor <b-kapoor@xxxxxx>
- [PATCH v1 2/2] arm64: dts: imx8mp: add aristainetos3 board support
- From: Heiko Schocher <hs@xxxxxxx>
- [PATCH v1 0/2] arm64: dts: imx8mp: add support for the ABB SoM and carrier
- From: Heiko Schocher <hs@xxxxxxx>
- [PATCH v1 1/2] dt-bindings: arm: fsl: Add ABB SoM and carrier
- From: Heiko Schocher <hs@xxxxxxx>
- Re: [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 1/3] arm64: dts: qcom: sar2130p: add support for SAR2130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/2] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
- From: Herve Codina <herve.codina@xxxxxxxxxxx>
- RE: [PATCH v4 10/13] drm/bridge: Add ITE IT6263 LVDS to HDMI converter
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- RE: [PATCH v4 09/13] dt-bindings: display: bridge: Add ITE IT6263 LVDS to HDMI converter
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH 2/6] dt-bindings: iio: dac: ad5791: Add required voltage supplies
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v3 2/2] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
- From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
- [PATCH v3 1/2] arm64: dts: qcom: qcs615: Adds SPMI support
- From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
- [PATCH v3 0/2] Adds SPMI bus, PMIC and peripherals for qcs615
- From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
- Re: [PATCH 2/2] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
- From: Herve Codina <herve.codina@xxxxxxxxxxx>
- Re: [PATCH v8 4/7] dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: iio: dac: ad5791: Add optional reset, clr and ldac gpios
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v8 6/7] arm64: dts: qcom: ipq9574: Add nsscc node
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: hwmon: add ltc4296-1 support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: i2c: spacemit: add support for K1 SoC
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3] dt-bindings: pinctrl: convert pinctrl-mcp23s08.txt to yaml format
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 08/10] pinctrl: samsung: Add Exynos9810 SoC specific data
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH V5 2/6] dt-bindings: clock: Add Qualcomm IPQ5424 GCC binding
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 3/3] riscv: hwprobe: export bfloat16 ISA extension
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- [PATCH 2/3] riscv: add ISA extension parsing for bfloat16 ISA extension
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- [PATCH 1/3] dt-bindings: riscv: add bfloat16 ISA extension description
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- [PATCH 0/3] riscv: Add bfloat16 instruction support
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- Re: [PATCH] dt-bindings: input: Goodix SPI HID Touchscreen
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 2/4] dt-bindings: net: Add support for Sophgo SG2044 dwmac
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- Re: [PATCH RFC 3/3] samples: rust: platform: Add property read examples
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- Re: [PATCH RFC 2/3] rust: Add bindings for device properties
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- Re: [PATCH RFC 1/3] of: unittest: Add a platform device node for rust platform driver sample
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- Re: [PATCH RFC 0/3] Initial rust bindings for device property reads
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- [PATCH 6/6] iio: dac: ad5791: Use devm_iio_device_register
- From: ahaslam@xxxxxxxxxxxx
- [PATCH 5/6] iio: dac: ad5791: Use devm_regulator_get_enable_read_voltage
- From: ahaslam@xxxxxxxxxxxx
- [PATCH 4/6] iio: dac: ad5791: Add reset, clr and ldac gpios
- From: ahaslam@xxxxxxxxxxxx
- [PATCH 3/6] iio: dac: ad5791: Include chip_info in device match tables
- From: ahaslam@xxxxxxxxxxxx
- [PATCH 2/6] dt-bindings: iio: dac: ad5791: Add required voltage supplies
- From: ahaslam@xxxxxxxxxxxx
- [PATCH 1/6] dt-bindings: iio: dac: ad5791: Add optional reset, clr and ldac gpios
- From: ahaslam@xxxxxxxxxxxx
- [PATCH 0/6] Improvements and Enhancements for AD5791 DAC Driver
- From: ahaslam@xxxxxxxxxxxx
- Re: [PATCH v2 2/4] dt-bindings: net: Add support for Sophgo SG2044 dwmac
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: input: Add Nuvoton MA35D1 keypad
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 10/10] arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F)
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v1 04/10] media: platform: mediatek: add isp_7x cam-raw unit
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: (subset) [PATCH v3 09/10] arm64: dts: exynos: Add Exynos9810 SoC support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v3] dt-bindings: pinctrl: convert pinctrl-mcp23s08.txt to yaml format
- From: Himanshu Bhavani <himanshu.bhavani@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 5/5] arm: dts: qcom-ipq5018-linksys-jamaica: Include dts from arm64
- From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
- Re: [PATCH v1 3/5] dmaengine: qcom: gpi: Add provision to support TRE size as the fourth argument of dma-cells property
- From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
- Re: [PATCH v8 5/7] clk: qcom: Add NSS clock Controller driver for IPQ9574
- From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
- Re: [PATCH 2/2] input: keypad: add new keypad driver for MA35D1
- From: Ming-Jen Chen <mjchen0829@xxxxxxxxx>
- Re: [PATCH 3/3] mailbox: mediatek: Add mtk-apu-mailbox driver
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- Re: [PATCH v1 5/5] i2c: i2c-qcom-geni: Add Block event interrupt support
- From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
- Re: [PATCH v1 5/5] i2c: i2c-qcom-geni: Add Block event interrupt support
- From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
- [PATCH V5 3/6] clk: qcom: add Global Clock controller (GCC) driver for IPQ5424 SoC
- From: Sricharan R <quic_srichara@xxxxxxxxxxx>
- [PATCH V5 6/6] arm64: defconfig: Enable IPQ5424 RDP466 base configs
- From: Sricharan R <quic_srichara@xxxxxxxxxxx>
- [PATCH V5 5/6] arm64: dts: qcom: add IPQ5424 SoC and rdp466 board support
- From: Sricharan R <quic_srichara@xxxxxxxxxxx>
- [PATCH V5 4/6] dt-bindings: qcom: Add ipq5424 boards
- From: Sricharan R <quic_srichara@xxxxxxxxxxx>
- [PATCH V5 2/6] dt-bindings: clock: Add Qualcomm IPQ5424 GCC binding
- From: Sricharan R <quic_srichara@xxxxxxxxxxx>
- [PATCH V5 1/6] clk: qcom: clk-alpha-pll: Add NSS HUAYRA ALPHA PLL support for ipq9574
- From: Sricharan R <quic_srichara@xxxxxxxxxxx>
- [PATCH V5 0/6] Add minimal boot support for IPQ5424
- From: Sricharan R <quic_srichara@xxxxxxxxxxx>
- Re: [PATCH v1 5/5] i2c: i2c-qcom-geni: Add Block event interrupt support
- From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
- Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
- From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
- Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
- From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
- Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
- From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
- Re: [PATCH v1 2/5] arm64: dts: qcom: Add support for configuring channel TRE size
- From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
- Re: [PATCH v1 08/10] media: platform: mediatek: add isp_7x state ctrl
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- [PATCH v2 2/2] i2c: spacemit: add support for SpacemiT K1 SoC
- From: Troy Mitchell <troymitchell988@xxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: i2c: spacemit: add support for K1 SoC
- From: Troy Mitchell <troymitchell988@xxxxxxxxx>
- [PATCH v2 0/2] riscv: spacemit: add i2c support to K1 SoC
- From: Troy Mitchell <troymitchell988@xxxxxxxxx>
- [PATCH v7 3/3] clk: aspeed: add AST2700 clock driver.
- From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
- [PATCH v7 2/3] reset: aspeed: register AST2700 reset auxiliary bus device
- From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
- [PATCH v7 1/3] dt-bindings: mfd: aspeed: support for AST2700
- From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
- [PATCH v7 0/3] [PATCH v6 0/3] Add support for AST2700 clk driver
- From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
- Re: [PATCH v8 0/9] Add support for sam9x7 SoC family
- From: <Varshini.Rajendran@xxxxxxxxxxxxx>
- Re: [PATCH v1 08/10] media: platform: mediatek: add isp_7x state ctrl
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- RE: [PATCH v4 0/2] Compute HS HCNT and LCNT based on HW parameters
- From: Michael Wu <Michael.Wu@xxxxxxxxx>
- Re: [PATCH v1 08/10] media: platform: mediatek: add isp_7x state ctrl
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v2 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
- From: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
- RE: [PATCH 1/2] dt-bindings: net: bluetooth: nxp: add support for supply and reset
- From: Sherry Sun <sherry.sun@xxxxxxx>
- Re: [PATCH v5 07/11] clk: qcom: rpmh: add support for SAR2130P
- From: Taniya Das <quic_tdas@xxxxxxxxxxx>
- Re: [PATCH v1 06/10] media: platform: mediatek: add isp_7x utility
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Info
- From: Van Esource <muffiekay@xxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: Add coresight nodes for QCS615
- From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
- [PATCH v2 2/3] watchdog: aspeed: Update bootstatus handling
- From: Chin-Ting Kuo <chin-ting_kuo@xxxxxxxxxxxxxx>
- [PATCH v2 1/3] ARM: dts: aspeed: Add WDT controller into alias field
- From: Chin-Ting Kuo <chin-ting_kuo@xxxxxxxxxxxxxx>
- [PATCH v2 0/3] Update ASPEED WDT bootstatus
- From: Chin-Ting Kuo <chin-ting_kuo@xxxxxxxxxxxxxx>
- [PATCH v2 3/3] watchdog: aspeed: Add support for SW restart
- From: Chin-Ting Kuo <chin-ting_kuo@xxxxxxxxxxxxxx>
- [PATCH v4 13/13] MAINTAINERS: Add maintainer for ITE IT6263 driver
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v4 12/13] arm64: defconfig: Enable ITE IT6263 driver
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v4 11/13] arm64: dts: imx8mp-evk: Add NXP LVDS to HDMI adapter cards
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v4 10/13] drm/bridge: Add ITE IT6263 LVDS to HDMI converter
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v4 09/13] dt-bindings: display: bridge: Add ITE IT6263 LVDS to HDMI converter
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v4 08/13] dt-bindings: display: Document dual-link LVDS display common properties
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v4 07/13] dt-bindings: display: lvds-data-mapping: Add 30-bit RGB pixel data mappings
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v4 06/13] drm: of: Add drm_of_lvds_get_dual_link_pixel_order_sink()
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v4 05/13] drm: of: Get MEDIA_BUS_FMT_RGB101010_1X7X5_{JEIDA, SPWG} LVDS data mappings
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v4 04/13] media: uapi: Add MEDIA_BUS_FMT_RGB101010_1X7X5_{SPWG, JEIDA}
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v4 03/13] drm/bridge: fsl-ldb: Use clk_round_rate() to validate "ldb" clock rate
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v4 02/13] drm/bridge: fsl-ldb: Get the next non-panel bridge
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v4 01/13] arm64: dts: imx8mp-skov-revb-mi1010ait-1cp1: Set "media_disp2_pix" clock rate to 70MHz
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v4 00/13] Add ITE IT6263 LVDS to HDMI converter support
- From: Liu Ying <victor.liu@xxxxxxx>
- Re: [PATCH v2 2/3] soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
- From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
- Re: [PATCH v2 2/3] soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
- From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
- [PATCH v2] ASoC: dt-bindings: fsl_spdif: Document imx6sl/sx compatible fallback
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH v1 02/10] media: platform: mediatek: add seninf controller
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v6 5/5] riscv: dts: starfive: add DeepComputing FML13V01 board device tree
- From: Guodong Xu <guodong@xxxxxxxxxxxx>
- Re: [PATCH v1 03/10] media: platform: mediatek: add isp_7x seninf unit
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v1 03/10] media: platform: mediatek: add isp_7x seninf unit
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: input: Add Nuvoton MA35D1 keypad
- From: Ming-Jen Chen <mjchen0829@xxxxxxxxx>
- Re: [PATCH v2 4/5] arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi
- From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx>
- [PATCH v2] arm64: dts: qcom: Add coresight nodes for QCS615
- From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
- [PATCH] riscv: dts: sophgo: Add ethernet configuration for cv18xx
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- Re: [PATCH v5 1/2] riscv: dts: sophgo: Add initial SG2002 SoC device tree
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: Add coresight nodes for QCS615
- From: Jie Gan <quic_jiegan@xxxxxxxxxxx>
- [PATCH v4 4/5] drm/panel: samsung-s6e88a0-ams427ap24: Add brightness control
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- [PATCH v4 5/5] drm/panel: samsung-s6e88a0-ams427ap24: Add flip option
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- [PATCH v4 2/5] dt-bindings: display: panel: Add Samsung S6E88A0-AMS427AP24
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- [PATCH v4 3/5] drm/panel: samsung-s6e88a0-ams427ap24: Add initial driver
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- [PATCH v4 0/5] Add new panel driver Samsung S6E88A0-AMS427AP24
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- [PATCH v4 1/5] dt-bindings: display: panel: Move flip properties to panel-common
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/4] dt-bindings: net: Add support for Sophgo SG2044 dwmac
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: power/supply: Add ltc4162-f/s and ltc4015
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH net-next v1 2/5] dt-bindings: net: dsa: ksz: add mdio-parent-bus property for internal MDIO
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH net-next v1 1/5] dt-bindings: net: dsa: ksz: add internal MDIO bus description
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v5 2/2] dt-bindings: hwmon: isl68137: add bindings to support voltage dividers
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: net: renesas,ether: Add iommus property
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- [PATCH] arm64: dts: imx8mp-navqp: Add HDMI support
- From: Gilles Talis <gilles.talis@xxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: orangepi-5-plus: Enable USB 3.0 ports
- From: Ondřej Jirman <megi@xxxxxx>
- Re: [PATCH v6 1/5] riscv: dts: starfive: jh7110-common: revised device node
- From: Guodong Xu <guodong@xxxxxxxxxxxx>
- Re: [PATCH v3 11/16] rust: pci: add basic PCI device / driver abstractions
- From: Boqun Feng <boqun.feng@xxxxxxxxx>
- Re: [PATCH v8 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v4 2/3] dt-bindings: crypto: Add Inside Secure SafeXcel EIP-93 crypto engine
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH RFC 2/3] rust: Add bindings for device properties
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: adi,ad7124: Allow specifications of a gpio for irq line
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH 3/3] iio: adc: ad7124: Disable all channels at probe time
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: soc: imx: fsl,imx-anatop: Add additional regulators
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: soc: imx: fsl,imx-anatop: Fix the i.MX7 irq number
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH] ASoC: dt-bindings: fsl_spdif: Document imx6sl/sx compatible fallback
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: adi,ad7124: Allow specifications of a gpio for irq line
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 04/13] dt-bindings: usb: Add A100 compatible string
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 11/13] dt-bindings: opp: h6: Add A100 operating points
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 00/36] drm/vc4: Add support for BCM2712 / Pi5 display hardware
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 11/13] dt-bindings: opp: h6: Add A100 operating points
- From: Cody Eksal <masterr3c0rd@epochal.quest>
- Re: [PATCH 04/13] dt-bindings: usb: Add A100 compatible string
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 03/13] dt-bindings: phy: sun50i-a64: add a100 compatible
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 2/3] dt-bindings: arm: qcom: add QAR2130P board
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: remoteproc: qcom,sm8350-pas: add SAR2130P aDSP compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: thermal: qcom-tsens: add SAR2130P compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: arm: pmu: Add Samsung Mongoose core compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: mediatek: Introduce MT8188 Geralt platform based Ciri
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 4/4] ASoC: dt-bindings: maxim,max98390: Document maxim,dsm_param_name property
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/4] ASoC: dt-bindings: mediatek,mt8188-mt6359: Update DAI link node pattern
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/4] ASoC: dt-bindings: maxim,max98390: Refernce common DAI properties
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/4] ASoC: dt-bindings: mediatek,mt8188-mt6359: Add adsp and dai-link properties
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: display: mediatek: dp: Add #sound-dai-cells property
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: adi,ad7124: Allow specifications of a gpio for irq line
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
[Index of Archives]
[Device Tree Spec]
[Linux USB Devel]
[Video for Linux]
[Scanner Discussion]
[Linux SCSI]
[Samba]
[Yosemite News]