Add audio-codec cs42888, enable esai0 and asrc0. Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 82 ++++++++++++++++++++ 1 file changed, 82 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index e983633a4bb31..31cf02275ca9e 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -134,6 +134,13 @@ reg_usdhc2_vmmc: usdhc2-vmmc { enable-active-high; }; + reg_audio: regulator-audio { + compatible = "regulator-fixed"; + regulator-name = "cs42888_supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_fec2_supply: regulator-fec2-nvcc { compatible = "regulator-fixed"; regulator-name = "fec2_nvcc"; @@ -223,6 +230,27 @@ simple-audio-card,codec { }; }; + sound-cs42888 { + compatible = "fsl,imx-audio-cs42888"; + model = "imx-cs42888"; + audio-cpu = <&esai0>; + audio-codec = <&cs42888>; + audio-asrc = <&asrc0>; + audio-routing = "Line Out Jack", "AOUT1L", + "Line Out Jack", "AOUT1R", + "Line Out Jack", "AOUT2L", + "Line Out Jack", "AOUT2R", + "Line Out Jack", "AOUT3L", + "Line Out Jack", "AOUT3R", + "Line Out Jack", "AOUT4L", + "Line Out Jack", "AOUT4R", + "AIN1L", "Line In Jack", + "AIN1R", "Line In Jack", + "AIN2L", "Line In Jack", + "AIN2R", "Line In Jack"; + status = "okay"; + }; + sound-wm8960 { compatible = "fsl,imx-audio-wm8960"; model = "wm8960-audio"; @@ -301,12 +329,45 @@ pca6416: gpio@20 { gpio-controller; #gpio-cells = <2>; }; + + cs42888: audio-codec@48 { + compatible = "cirrus,cs42888"; + reg = <0x48>; + clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>; + clock-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cs42888_reset>; + VA-supply = <®_audio>; + VD-supply = <®_audio>; + VLS-supply = <®_audio>; + VLC-supply = <®_audio>; + reset-gpios = <&lsio_gpio4 25 GPIO_ACTIVE_LOW>; + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&mclkout0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>; + status = "okay"; + }; }; &cm41_intmux { status = "okay"; }; +&esai0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esai0>; + assigned-clocks = <&acm IMX_ADMA_ACM_ESAI0_MCLK_SEL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>, + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>, + <&esai0_lpcg IMX_LPCG_CLK_4>; + assigned-clock-parents = <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>; + assigned-clock-rates = <0>, <786432000>, <49152000>, <12288000>, <49152000>; + status = "okay"; +}; + &hsio_phy { fsl,hsio-cfg = "pciea-pcieb-sata"; fsl,refclk-pad-mode = "input"; @@ -691,6 +752,12 @@ IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31 0x0600004c >; }; + pinctrl_cs42888_reset: cs42888_resetgrp { + fsl,pins = < + IMX8QM_QSPI1A_DATA1_LSIO_GPIO4_IO25 0x0600004c + >; + }; + pinctrl_i2c0: i2c0grp { fsl,pins = < IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL 0x06000021 @@ -725,6 +792,21 @@ IMX8QM_M41_I2C0_SCL_M41_I2C0_SCL 0x0600004c >; }; + pinctrl_esai0: esai0grp { + fsl,pins = < + IMX8QM_ESAI0_FSR_AUD_ESAI0_FSR 0xc6000040 + IMX8QM_ESAI0_FST_AUD_ESAI0_FST 0xc6000040 + IMX8QM_ESAI0_SCKR_AUD_ESAI0_SCKR 0xc6000040 + IMX8QM_ESAI0_SCKT_AUD_ESAI0_SCKT 0xc6000040 + IMX8QM_ESAI0_TX0_AUD_ESAI0_TX0 0xc6000040 + IMX8QM_ESAI0_TX1_AUD_ESAI0_TX1 0xc6000040 + IMX8QM_ESAI0_TX2_RX3_AUD_ESAI0_TX2_RX3 0xc6000040 + IMX8QM_ESAI0_TX3_RX2_AUD_ESAI0_TX3_RX2 0xc6000040 + IMX8QM_ESAI0_TX4_RX1_AUD_ESAI0_TX4_RX1 0xc6000040 + IMX8QM_ESAI0_TX5_RX0_AUD_ESAI0_TX5_RX0 0xc6000040 + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < IMX8QM_ENET0_MDC_CONN_ENET0_MDC 0x06000020 -- 2.34.1