Common YAML schema for devices that exports internal peripherals through PCI BARs. The BARs are exposed as simple-buses through which the peripherals can be accessed. This is not intended to be used as a standalone binding, but should be included by device specific bindings. Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx> --- .../devicetree/bindings/pci/pci-ep-bus.yaml | 58 +++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 59 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/pci-ep-bus.yaml diff --git a/Documentation/devicetree/bindings/pci/pci-ep-bus.yaml b/Documentation/devicetree/bindings/pci/pci-ep-bus.yaml new file mode 100644 index 000000000000..e532621f226b --- /dev/null +++ b/Documentation/devicetree/bindings/pci/pci-ep-bus.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/pci-ep-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for PCI MFD Endpoints with Peripherals Addressable from BARs + +maintainers: + - Andrea della Porta <andrea.porta@xxxxxxxx> + +description: + Define a generic node representing a PCI endpoint which contains several sub- + peripherals. The peripherals can be accessed through one or more BARs. + This common schema is intended to be referenced from device tree bindings, and + does not represent a device tree binding by itself. + +properties: + '#address-cells': + const: 3 + + '#size-cells': + const: 2 + + ranges: + minItems: 1 + maxItems: 6 + items: + maxItems: 8 + additionalItems: true + items: + - maximum: 5 # The BAR number + - const: 0 + - const: 0 + +patternProperties: + '^pci-ep-bus@[0-5]$': + type: object + description: + One node for each BAR used by peripherals contained in the PCI endpoint. + Each node represent a bus on which peripherals are connected. + This allows for some segmentation, e.g. one peripheral is accessible + through BAR0 and another through BAR1, and you don't want the two + peripherals to be able to act on the other BAR. Alternatively, when + different peripherals need to share BARs, you can define only one node + and use 'ranges' property to map all the used BARs. + + additionalProperties: true + + properties: + compatible: + const: simple-bus + + required: + - compatible + +additionalProperties: true +... diff --git a/MAINTAINERS b/MAINTAINERS index c55d12550246..ccf123b805c8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19384,6 +19384,7 @@ RASPBERRY PI RP1 PCI DRIVER M: Andrea della Porta <andrea.porta@xxxxxxxx> S: Maintained F: Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml +F: Documentation/devicetree/bindings/pci/pci-ep-bus.yaml F: Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml F: include/dt-bindings/clock/rp1.h F: include/dt-bindings/misc/rp1.h -- 2.35.3
