From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
Add High Speed ad3552r platform driver.
The ad3552r DAC is controlled by a custom (fpga-based) DAC IP
through the current AXI backend, or similar alternative IIO backend.
Compared to the existing driver (ad3552r.c), that is a simple SPI
driver, this driver is coupled with a DAC IIO backend that finally
controls the ad3552r by a fpga-based "QSPI+DDR" interface, to reach
maximum transfer rate of 33MUPS using dma stream capabilities.
All commands involving QSPI bus read/write are delegated to the backend
through the provided APIs for bus read/write.
Reviewed-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
---
drivers/iio/dac/Kconfig | 19 ++
drivers/iio/dac/Makefile | 4 +-
drivers/iio/dac/ad3552r-hs.c | 529 +++++++++++++++++++++++++++++++++++++++++++
drivers/iio/dac/ad3552r-hs.h | 19 ++
drivers/iio/dac/ad3552r.h | 4 +
5 files changed, 574 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index 26f9de55b79f..8f16358c779f 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -6,9 +6,28 @@
menu "Digital to analog converters"
+config AD3552R_HS
+ tristate "Analog Devices AD3552R DAC High Speed driver"
+ select ADI_AXI_DAC
+ select AD3552R_LIB
+ help
+ Say yes here to build support for Analog Devices AD3552R
+ Digital to Analog Converter High Speed driver.
+
+ The driver requires the assistance of an IP core to operate,
+ since data is streamed into target device via DMA, sent over a
+ QSPI + DDR (Double Data Rate) bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad3552r-hs.
+
+config AD3552R_LIB
+ tristate
+
config AD3552R
tristate "Analog Devices AD3552R DAC driver"
depends on SPI_MASTER
+ select AD3552R_LIB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
index c92de0366238..414c152be779 100644
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -4,7 +4,9 @@
#
# When adding new entries keep the list in alphabetical order
-obj-$(CONFIG_AD3552R) += ad3552r.o ad3552r-common.o
+obj-$(CONFIG_AD3552R_HS) += ad3552r-hs.o
+obj-$(CONFIG_AD3552R_LIB) += ad3552r-common.o
+obj-$(CONFIG_AD3552R) += ad3552r.o
obj-$(CONFIG_AD5360) += ad5360.o
obj-$(CONFIG_AD5380) += ad5380.o
obj-$(CONFIG_AD5421) += ad5421.o
diff --git a/drivers/iio/dac/ad3552r-hs.c b/drivers/iio/dac/ad3552r-hs.c
new file mode 100644
index 000000000000..2fd7502c0e93
--- /dev/null
+++ b/drivers/iio/dac/ad3552r-hs.c
@@ -0,0 +1,529 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Analog Devices AD3552R
+ * Digital to Analog converter driver, High Speed version
+ *
+ * Copyright 2024 Analog Devices Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/backend.h>
+#include <linux/iio/buffer.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/units.h>
+
+#include "ad3552r.h"
+#include "ad3552r-hs.h"
+
+struct ad3552r_hs_state {
+ const struct ad3552r_model_data *model_data;
+ struct gpio_desc *reset_gpio;
+ struct device *dev;
+ struct iio_backend *back;
+ bool single_channel;
+ struct ad3552r_ch_data ch_data[AD3552R_MAX_CH];
+ struct ad3552r_hs_platform_data *data;
+};
+
+static int ad3552r_qspi_update_reg_bits(struct ad3552r_hs_state *st,
+ u32 reg, u32 mask, u32 val,
+ size_t xfer_size)
+{
+ u32 rval;
+ int ret;
+
+ ret = st->data->bus_reg_read(st->back, reg, &rval, xfer_size);
+ if (ret)
+ return ret;
+
+ rval = (rval & ~mask) | val;
+
+ return st->data->bus_reg_write(st->back, reg, rval, xfer_size);
+}
+
+static int ad3552r_hs_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct ad3552r_hs_state *st = iio_priv(indio_dev);
+ int ret;
+ int ch = chan->channel;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ /*
+ * Using 4 lanes (QSPI), then using 2 as DDR mode is
+ * considered always on (considering buffering mode always).
+ */
+ *val = DIV_ROUND_CLOSEST(st->data->bus_sample_data_clock_hz *
+ 4 * 2, chan->scan_type.realbits);
+
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_RAW:
+ ret = st->data->bus_reg_read(st->back,
+ AD3552R_REG_ADDR_CH_DAC_16B(chan->channel),
+ val, 2);
+ if (ret)
+ return ret;
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = st->ch_data[ch].scale_int;
+ *val2 = st->ch_data[ch].scale_dec;
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_OFFSET:
+ *val = st->ch_data[ch].offset_int;
+ *val2 = st->ch_data[ch].offset_dec;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ad3552r_hs_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct ad3552r_hs_state *st = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ iio_device_claim_direct_scoped(return -EBUSY, indio_dev) {
+ return st->data->bus_reg_write(st->back,
+ AD3552R_REG_ADDR_CH_DAC_16B(chan->channel),
+ val, 2);
+ }
+ unreachable();
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ad3552r_hs_buffer_postenable(struct iio_dev *indio_dev)
+{
+ struct ad3552r_hs_state *st = iio_priv(indio_dev);
+ struct iio_backend_data_fmt fmt = {
+ .type = IIO_BACKEND_DATA_UNSIGNED
+ };
+ int loop_len, val, ret;
+
+ switch (*indio_dev->active_scan_mask) {
+ case AD3552R_CH0_ACTIVE:
+ st->single_channel = true;
+ loop_len = 2;
+ val = AD3552R_REG_ADDR_CH_DAC_16B(0);
+ break;
+ case AD3552R_CH1_ACTIVE:
+ st->single_channel = true;
+ loop_len = 2;
+ val = AD3552R_REG_ADDR_CH_DAC_16B(1);
+ break;
+ case AD3552R_CH0_ACTIVE | AD3552R_CH1_ACTIVE:
+ st->single_channel = false;
+ loop_len = 4;
+ val = AD3552R_REG_ADDR_CH_DAC_16B(1);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = st->data->bus_reg_write(st->back, AD3552R_REG_ADDR_STREAM_MODE,
+ loop_len, 1);
+ if (ret)
+ return ret;
+
+ /* Inform DAC chip to switch into DDR mode */
+ ret = ad3552r_qspi_update_reg_bits(st,
+ AD3552R_REG_ADDR_INTERFACE_CONFIG_D,
+ AD3552R_MASK_SPI_CONFIG_DDR,
+ AD3552R_MASK_SPI_CONFIG_DDR, 1);
+ if (ret)
+ return ret;
+
+ /* Inform DAC IP to go for DDR mode from now on */
+ ret = iio_backend_ddr_enable(st->back);
+ if (ret) {
+ dev_err(st->dev, "could not set DDR mode, not streaming");
+ goto exit_err;
+ }
+
+ ret = iio_backend_data_transfer_addr(st->back, val);
+ if (ret)
+ goto exit_err;
+
+ ret = iio_backend_data_format_set(st->back, 0, &fmt);
+ if (ret)
+ goto exit_err;
+
+ ret = iio_backend_data_stream_enable(st->back);
+ if (ret)
+ goto exit_err;
+
+ return 0;
+
+exit_err:
+ ad3552r_qspi_update_reg_bits(st,
+ AD3552R_REG_ADDR_INTERFACE_CONFIG_D,
+ AD3552R_MASK_SPI_CONFIG_DDR,
+ 0, 1);
+
+ iio_backend_ddr_disable(st->back);
+
+ return ret;
+}
+
+static int ad3552r_hs_buffer_predisable(struct iio_dev *indio_dev)
+{
+ struct ad3552r_hs_state *st = iio_priv(indio_dev);
+ int ret;
+
+ ret = iio_backend_data_stream_disable(st->back);
+ if (ret)
+ return ret;
+
+ /* Inform DAC to set in SDR mode */
+ ret = ad3552r_qspi_update_reg_bits(st,
+ AD3552R_REG_ADDR_INTERFACE_CONFIG_D,
+ AD3552R_MASK_SPI_CONFIG_DDR,
+ 0, 1);
+ if (ret)
+ return ret;
+
+ ret = iio_backend_ddr_disable(st->back);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static inline int ad3552r_hs_set_output_range(struct ad3552r_hs_state *st,
+ int ch, unsigned int mode)
+{
+ int val;
+
+ if (ch == 0)
+ val = FIELD_PREP(AD3552R_MASK_CH0_RANGE, mode);
+ else
+ val = FIELD_PREP(AD3552R_MASK_CH1_RANGE, mode);
+
+ return ad3552r_qspi_update_reg_bits(st,
+ AD3552R_REG_ADDR_CH0_CH1_OUTPUT_RANGE,
+ AD3552R_MASK_CH_OUTPUT_RANGE_SEL(ch),
+ val, 1);
+}
+
+static int ad3552r_hs_reset(struct ad3552r_hs_state *st)
+{
+ int ret;
+
+ st->reset_gpio = devm_gpiod_get_optional(st->dev,
+ "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(st->reset_gpio))
+ return PTR_ERR(st->reset_gpio);
+
+ if (st->reset_gpio) {
+ fsleep(10);
+ gpiod_set_value_cansleep(st->reset_gpio, 0);
+ } else {
+ ret = ad3552r_qspi_update_reg_bits(st,
+ AD3552R_REG_ADDR_INTERFACE_CONFIG_A,
+ AD3552R_MASK_SOFTWARE_RESET,
+ AD3552R_MASK_SOFTWARE_RESET, 1);
+ if (ret)
+ return ret;
+ }
+ msleep(100);
+
+ return 0;
+}
+
+static int ad3552r_hs_scratch_pad_test(struct ad3552r_hs_state *st)
+{
+ int ret, val;
+
+ ret = st->data->bus_reg_write(st->back, AD3552R_REG_ADDR_SCRATCH_PAD,
+ AD3552R_SCRATCH_PAD_TEST_VAL1, 1);
+ if (ret)
+ return ret;
+
+ ret = st->data->bus_reg_read(st->back, AD3552R_REG_ADDR_SCRATCH_PAD,
+ &val, 1);
+ if (ret)
+ return ret;
+
+ if (val != AD3552R_SCRATCH_PAD_TEST_VAL1)
+ return dev_err_probe(st->dev, -EIO,
+ "SCRATCH_PAD_TEST mismatch. Expected 0x%x, Read 0x%x\n",
+ AD3552R_SCRATCH_PAD_TEST_VAL1, val);
+
+ ret = st->data->bus_reg_write(st->back, AD3552R_REG_ADDR_SCRATCH_PAD,
+ AD3552R_SCRATCH_PAD_TEST_VAL2, 1);
+ if (ret)
+ return ret;
+
+ ret = st->data->bus_reg_read(st->back, AD3552R_REG_ADDR_SCRATCH_PAD,
+ &val, 1);
+ if (ret)
+ return ret;
+
+ if (val != AD3552R_SCRATCH_PAD_TEST_VAL2)
+ return dev_err_probe(st->dev, -EIO,
+ "SCRATCH_PAD_TEST mismatch. Expected 0x%x, Read 0x%x\n",
+ AD3552R_SCRATCH_PAD_TEST_VAL2, val);
+
+ return 0;
+}
+
+static int ad3552r_hs_setup_custom_gain(struct ad3552r_hs_state *st,
+ int ch, u16 gain, u16 offset)
+{
+ int ret;
+
+ ret = st->data->bus_reg_write(st->back, AD3552R_REG_ADDR_CH_OFFSET(ch),
+ offset, 1);
+ if (ret)
+ return ret;
+
+ return st->data->bus_reg_write(st->back, AD3552R_REG_ADDR_CH_GAIN(ch),
+ gain, 1);
+}
+
+static int ad3552r_hs_setup(struct ad3552r_hs_state *st)
+{
+ s16 goffs;
+ u16 id;
+ u16 gain = 0, offset = 0;
+ u32 ch, val, range;
+ int ret;
+
+ ret = ad3552r_hs_reset(st);
+ if (ret)
+ return ret;
+
+ ret = iio_backend_ddr_disable(st->back);
+ if (ret)
+ return ret;
+
+ ret = ad3552r_hs_scratch_pad_test(st);
+ if (ret)
+ return ret;
+
+ ret = st->data->bus_reg_read(st->back, AD3552R_REG_ADDR_PRODUCT_ID_L,
+ &val, 1);
+ if (ret)
+ return ret;
+
+ id = val;
+
+ ret = st->data->bus_reg_read(st->back, AD3552R_REG_ADDR_PRODUCT_ID_H,
+ &val, 1);
+ if (ret)
+ return ret;
+
+ id |= val << 8;
+ if (id != st->model_data->chip_id)
+ dev_info(st->dev, "Chip ID error. Expected 0x%x, Read 0x%x\n",
+ AD3552R_ID, id);
+
+ ret = st->data->bus_reg_write(st->back,
+ AD3552R_REG_ADDR_SH_REFERENCE_CONFIG,
+ 0, 1);
+ if (ret)
+ return ret;
+
+ ret = st->data->bus_reg_write(st->back,
+ AD3552R_REG_ADDR_TRANSFER_REGISTER,
+ FIELD_PREP(AD3552R_MASK_MULTI_IO_MODE,
+ AD3552R_QUAD_SPI) |
+ AD3552R_MASK_STREAM_LENGTH_KEEP_VALUE, 1);
+ if (ret)
+ return ret;
+
+ ret = iio_backend_data_source_set(st->back, 0, IIO_BACKEND_EXTERNAL);
+ if (ret)
+ return ret;
+
+ ret = iio_backend_data_source_set(st->back, 1, IIO_BACKEND_EXTERNAL);
+ if (ret)
+ return ret;
+
+ ret = ad3552r_get_ref_voltage(st->dev, &val);
+ if (ret < 0)
+ return ret;
+
+ val = ret;
+
+ ret = ad3552r_qspi_update_reg_bits(st,
+ AD3552R_REG_ADDR_SH_REFERENCE_CONFIG,
+ AD3552R_MASK_REFERENCE_VOLTAGE_SEL,
+ val, 1);
+ if (ret)
+ return ret;
+
+ ret = ad3552r_get_drive_strength(st->dev, &val);
+ if (!ret) {
+ ret = ad3552r_qspi_update_reg_bits(st,
+ AD3552R_REG_ADDR_INTERFACE_CONFIG_D,
+ AD3552R_MASK_SDO_DRIVE_STRENGTH,
+ val, 1);
+ if (ret)
+ return ret;
+ }
+
+ device_for_each_child_node_scoped(st->dev, child) {
+ ret = fwnode_property_read_u32(child, "reg", &ch);
+ if (ret)
+ return dev_err_probe(st->dev, ret,
+ "reg property missing\n");
+
+ ret = ad3552r_get_output_range(st->dev, st->model_data, child,
+ &range);
+ if (ret && ret != -ENOENT)
+ return ret;
+ if (ret == -ENOENT) {
+ ret = ad3552r_get_custom_gain(st->dev, child,
+ &st->ch_data[ch].p,
+ &st->ch_data[ch].n,
+ &st->ch_data[ch].rfb,
+ &st->ch_data[ch].gain_offset);
+ if (ret)
+ return ret;
+
+ gain = ad3552r_calc_custom_gain(st->ch_data[ch].p,
+ st->ch_data[ch].n,
+ st->ch_data[ch].gain_offset);
+ offset = abs(goffs);
+
+ st->ch_data[ch].range_override = 1;
+
+ ret = ad3552r_hs_setup_custom_gain(st, ch, gain,
+ offset);
+ if (ret)
+ return ret;
+ } else {
+ st->ch_data[ch].range = range;
+
+ ret = ad3552r_hs_set_output_range(st, ch, range);
+ if (ret)
+ return ret;
+ }
+
+ ad3552r_calc_gain_and_offset(&st->ch_data[ch], st->model_data);
+ }
+
+ return 0;
+}
+
+static const struct iio_buffer_setup_ops ad3552r_hs_buffer_setup_ops = {
+ .postenable = ad3552r_hs_buffer_postenable,
+ .predisable = ad3552r_hs_buffer_predisable,
+};
+
+#define AD3552R_CHANNEL(ch) { \
+ .type = IIO_VOLTAGE, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_OFFSET), \
+ .output = 1, \
+ .indexed = 1, \
+ .channel = (ch), \
+ .scan_index = (ch), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_BE, \
+ } \
+}
+
+static const struct iio_chan_spec ad3552r_hs_channels[] = {
+ AD3552R_CHANNEL(0),
+ AD3552R_CHANNEL(1),
+};
+
+static const struct iio_info ad3552r_hs_info = {
+ .read_raw = &ad3552r_hs_read_raw,
+ .write_raw = &ad3552r_hs_write_raw,
+};
+
+static int ad3552r_hs_probe(struct platform_device *pdev)
+{
+ struct ad3552r_hs_state *st;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+ st->dev = &pdev->dev;
+
+ st->data = dev_get_platdata(st->dev);
+ if (!st->data)
+ return dev_err_probe(st->dev, -ENODEV, "No platform data !");
+
+ st->back = devm_iio_backend_get(&pdev->dev, NULL);
+ if (IS_ERR(st->back))
+ return PTR_ERR(st->back);
+
+ ret = devm_iio_backend_enable(&pdev->dev, st->back);
+ if (ret)
+ return ret;
+
+ st->model_data = device_get_match_data(&pdev->dev);
+ if (!st->model_data)
+ return -ENODEV;
+
+ indio_dev->name = "ad3552r";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->setup_ops = &ad3552r_hs_buffer_setup_ops;
+ indio_dev->channels = ad3552r_hs_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ad3552r_hs_channels);
+ indio_dev->info = &ad3552r_hs_info;
+
+ ret = devm_iio_backend_request_buffer(&pdev->dev, st->back, indio_dev);
+ if (ret)
+ return ret;
+
+ ret = ad3552r_hs_setup(st);
+ if (ret)
+ return ret;
+
+ return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static const struct ad3552r_model_data ad3552r_model_data = {
+ .model_name = "ad3552r",
+ .chip_id = AD3552R_ID,
+ .num_hw_channels = 2,
+ .ranges_table = ad3552r_ch_ranges,
+ .num_ranges = ARRAY_SIZE(ad3552r_ch_ranges),
+};
+
+static const struct of_device_id ad3552r_hs_of_id[] = {
+ { .compatible = "adi,ad3552r", .data = &ad3552r_model_data },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ad3552r_hs_of_id);
+
+static struct platform_driver ad3552r_hs_driver = {
+ .driver = {
+ .name = "ad3552r-hs",
+ .of_match_table = ad3552r_hs_of_id,
+ },
+ .probe = ad3552r_hs_probe,
+};
+module_platform_driver(ad3552r_hs_driver);
+
+MODULE_AUTHOR("Dragos Bogdan <dragos.bogdan@xxxxxxxxxx>");
+MODULE_AUTHOR("Angelo Dureghello <adueghello@xxxxxxxxxxxx>");
+MODULE_DESCRIPTION("AD3552R Driver - High Speed version");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_BACKEND);
+MODULE_IMPORT_NS(IIO_AD3552R);
diff --git a/drivers/iio/dac/ad3552r-hs.h b/drivers/iio/dac/ad3552r-hs.h
new file mode 100644
index 000000000000..724261d38dea
--- /dev/null
+++ b/drivers/iio/dac/ad3552r-hs.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2024 Analog Devices Inc.
+ * Copyright (c) 2024 Baylibre, SAS
+ */
+#ifndef __LINUX_PLATFORM_DATA_AD3552R_HS_H__
+#define __LINUX_PLATFORM_DATA_AD3552R_HS_H__
+
+struct iio_backend;
+
+struct ad3552r_hs_platform_data {
+ int (*bus_reg_read)(struct iio_backend *back, u32 reg, u32 *val,
+ size_t data_size);
+ int (*bus_reg_write)(struct iio_backend *back, u32 reg, u32 val,
+ size_t data_size);
+ u32 bus_sample_data_clock_hz;
+};
+
+#endif /* __LINUX_PLATFORM_DATA_AD3552R_HS_H__ */
diff --git a/drivers/iio/dac/ad3552r.h b/drivers/iio/dac/ad3552r.h
index 7511e3f1882c..fd5a3dfd1d1c 100644
--- a/drivers/iio/dac/ad3552r.h
+++ b/drivers/iio/dac/ad3552r.h
@@ -127,8 +127,12 @@
#define AD3552R_GAIN_SCALE 1000
#define AD3552R_LDAC_PULSE_US 100
+#define AD3552R_CH0_ACTIVE BIT(0)
+#define AD3552R_CH1_ACTIVE BIT(1)
+
#define AD3552R_MAX_RANGES 5
#define AD3542R_MAX_RANGES 6
+#define AD3552R_QUAD_SPI 2
extern const s32 ad3552r_ch_ranges[AD3552R_MAX_RANGES][2];
extern const s32 ad3542r_ch_ranges[AD3542R_MAX_RANGES][2];
--
2.45.0.rc1
