Hi Laurent,
On Sun, 27 Oct 2024 18:23:50 +0200
Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
[...]
> > +static int sn65dsi83_reset_pipeline(struct sn65dsi83 *sn65dsi83)
> > +{
> > + struct drm_device *dev = sn65dsi83->bridge.dev;
> > + struct drm_modeset_acquire_ctx ctx;
> > + struct drm_atomic_state *state;
> > + int err;
> > +
> > + /* Use operation done in drm_atomic_helper_suspend() followed by
> > + * operation done in drm_atomic_helper_resume() but without releasing
> > + * the lock between suspend()/resume()
> > + */
> > +
> > + DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx, 0, err);
> > +
> > + state = drm_atomic_helper_duplicate_state(dev, &ctx);
> > + if (IS_ERR(state)) {
> > + err = PTR_ERR(state);
> > + goto unlock;
> > + }
> > +
> > + err = drm_atomic_helper_disable_all(dev, &ctx);
> > + if (err < 0)
> > + goto unlock;
> > +
> > + drm_mode_config_reset(dev);
> > +
> > + err = drm_atomic_helper_commit_duplicated_state(state, &ctx);
>
> Committing a full atomic state from a bridge driver in an asynchronous
> way seems quite uncharted territory, and it worries me. It's also a very
> heavyweight, you disable all outputs here, instead of focussing on the
> output connected to the bridge. Can you either implement something more
> local, resetting the bridge only, or create a core helper to handle this
> kind of situation, on a per-output basis ?
A full restart of the bridge (power off/on) is needed and so we need to
redo the initialization sequence. This initialization sequence has to be
done with the DSI data lanes (bridge inputs) driven in LP11 state and so
without any video stream. Only focussing on bridge outputs will not be
sufficient. That's why I brought the pipeline down and restarted it.
Of course, I can copy/paste sn65dsi83_reset_pipeline() to a core helper
function. Is drm_atomic_helper_reset_all() could be a good candidate?
Best regards,
Hervé
