Earlier this year a new DTSI file was created to define common
properties for the StarFive VisionFive 2 and Milk-V Mars boards,
both of which use the StarFive JH7110 SoC. The Pine64 Star64
board has also been added since that time.
Some of the nodes defined in "jh7110-common.dtsi" are enabled in
that file because all of the boards including it "want" them
enabled.
An upcoming patch enables another JH7110 board, but for that
board not all of these common nodes should be enabled. Prepare
for supporting the new board by avoiding enabling these nodes in
"jh7110-common.dtsi", and enable them instead in these files:
jh7110-milkv-mars.dts
jh7110-pine64-star64.dts
jh7110-starfive-visionfive-2.dtsi
Signed-off-by: Alex Elder <elder@xxxxxxxxxxxx>
Signed-off-by: Guodong Xu <guodong@xxxxxxxxxxxx>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
---
v7: Add Emil's Reviewed-by
Fixed a typo in description
v6: New patch
.../boot/dts/starfive/jh7110-common.dtsi | 5 -----
.../boot/dts/starfive/jh7110-milkv-mars.dts | 17 ++++++++++++++++
.../dts/starfive/jh7110-pine64-star64.dts | 17 ++++++++++++++++
.../jh7110-starfive-visionfive-2.dtsi | 20 +++++++++++++++++++
4 files changed, 54 insertions(+), 5 deletions(-)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index c7771b3b6475..9e77f79ec162 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -176,7 +176,6 @@ csi2rx_to_camss: endpoint {
&gmac0 {
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- status = "okay";
mdio {
#address-cells = <1>;
@@ -196,7 +195,6 @@ &i2c0 {
i2c-scl-falling-time-ns = <510>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
- status = "okay";
};
&i2c2 {
@@ -311,7 +309,6 @@ &pcie1 {
&pwmdac {
pinctrl-names = "default";
pinctrl-0 = <&pwmdac_pins>;
- status = "okay";
};
&qspi {
@@ -350,13 +347,11 @@ uboot@100000 {
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm_pins>;
- status = "okay";
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
- status = "okay";
spi_dev0: spi@0 {
compatible = "rohm,dh2228fv";
diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
index 5cb9e99e1dac..66ad3eb2fd66 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
@@ -15,6 +15,11 @@ &gmac0 {
starfive,tx-use-rgmii-clk;
assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
};
&pcie0 {
@@ -35,3 +40,15 @@ &phy0 {
rx-internal-delay-ps = <1500>;
tx-internal-delay-ps = <1500>;
};
+
+&pwm {
+ status = "okay";
+};
+
+&pwmdac {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
index b720cdd15ed6..dbc8612b8464 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
@@ -18,6 +18,7 @@ &gmac0 {
starfive,tx-use-rgmii-clk;
assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+ status = "okay";
};
&gmac1 {
@@ -39,6 +40,10 @@ phy1: ethernet-phy@1 {
};
};
+&i2c0 {
+ status = "okay";
+};
+
&pcie1 {
status = "okay";
};
@@ -63,3 +68,15 @@ &phy1 {
motorcomm,tx-clk-10-inverted;
motorcomm,tx-clk-100-inverted;
};
+
+&pwm {
+ status = "okay";
+};
+
+&pwmdac {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 18f38fc790a4..ef93a394bb2f 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -13,6 +13,10 @@ aliases {
};
};
+&gmac0 {
+ status = "okay";
+};
+
&gmac1 {
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
@@ -29,6 +33,10 @@ phy1: ethernet-phy@1 {
};
};
+&i2c0 {
+ status = "okay";
+};
+
&mmc0 {
non-removable;
};
@@ -40,3 +48,15 @@ &pcie0 {
&pcie1 {
status = "okay";
};
+
+&pwm {
+ status = "okay";
+};
+
+&pwmdac {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+};
--
2.34.1
