Linux Device Tree
[Prev Page][Next Page]
- Re: [PATCH 5/7] arm64: dts: broadcom: Add interrupt-controller flag for intc on BCM2712
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v14 0/8] Add QPIC SPI NAND driver
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: Describe why is HWRNG disabled in RK356x base dtsi
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- [PATCH 1/1] pwm: Add support for pwm nexus dt bindings
- From: Herve Codina <herve.codina@xxxxxxxxxxx>
- Re: [PATCH 3/3] PCI: qcom: Enable ECAM feature based on config size
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: (subset) [PATCH 1/3] dt-bindings: misc: lwn,bk4-spi: Add binding
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH 4/5] arm64: dts: renesas: Add R8A779G3 SoC support
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- Re: [PATCH] dt-bindings: Drop Bhupesh Sharma from maintainers
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH 0/5] arm64: renesas: Add R8A779G3 White Hawk Single support
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- Re: [PATCH 2/3] PCI: dwc: Add ECAM support with iATU configuration
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- [PATCH v6 2/4] iio: adc: ad4000: Add timestamp channel
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- Re: Re: [PATCH v3 3/4] arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)
- From: Umer Uddin <umer.uddin@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 1/5] dt-bindings: soc: renesas: Move R8A779G0 White Hawk up
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- [PATCH 0/3] Add support for Fujitsu MB85RS128TY
- From: Jonas Rebmann <jre@xxxxxxxxxxxxxx>
- [PATCH 3/3] mtd: mchp48l640: add support for Fujitsu MB85RS128TY FRAM
- From: Jonas Rebmann <jre@xxxxxxxxxxxxxx>
- [PATCH 2/3] dt-bindings: mtd: mchp48l640 add mb85rs128ty compatible
- From: Jonas Rebmann <jre@xxxxxxxxxxxxxx>
- [PATCH v3 3/4] arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)
- From: Umer Uddin <umer.uddin@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- [RESEND,v3 0/4] Add minimal Samsung Galaxy S20 Series board, SM-G981B and SM-G980F support
- From: Umer Uddin <umer.uddin@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 2/5] dt-bindings: soc: renesas: Document R8A779G3 White Hawk Single
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- Re: [PATCHv2] arm64: dts: ti: k3-j721e-beagleboneai64: Enable ACSPCIE output for PCIe1
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 0/2] Add support for Samsung Galaxy S20 FE (SM-G780F/r8s) [SoC Exynos990]
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 11/18] arm64: dts: mediatek: mt7988: add chosen node on bpi-r4
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v4 2/2] cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- [PATCH v3 4/4] arm64: dts: exynos: Add initial support for Samsung Galaxy S20 (x1slte)
- From: Umer Uddin <umer.uddin@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 3/4] arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v3 2/4] arm64: dts: exynos: Add initial support for Samsung Galaxy S20 Series boards (hubble)
- From: Umer Uddin <umer.uddin@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH v3 1/4] dt-bindings: arm: samsung: samsung-boards: Add bindings for SM-G981B and SM-G980F board
- From: Umer Uddin <umer.uddin@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4] arm64: dts: qcom: qcs615: Add QUPv3 configuration
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: Re: [PATCH v3 3/4] arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)
- From: Umer Uddin <umer.uddin@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: cpufreq: Document support for Airoha EN7581 CPUFreq
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v2 0/2] Add DT Support for primary USB on QCS615
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH 7/7] arm64: dts: broadcom: Fix device tree errors on BCM2712.
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: cpufreq: Document support for Airoha EN7581 CPUFreq
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: of_unittest: Missing #address & #size-cells warning
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 1/8] dt-bindings: power: mediatek: Add another nested power-domain layer
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v2 3/4] drm/panel-edp: Add unknown BOE panel for HP Omnibook X14
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 04/15] dt-bindings: mmc: atmel,sama5d2-sdhci: add microchip,sama7d65-sdhci
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 2/7] dtbindings: display: Fix BCM2835 HVS bindings for BCM2712
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: enable rng on all rk356x
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: qcom: qcs615: Add LLCC support for QCS615
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: (subset) [PATCH v4 0/3] Add support for APPS SMMU on QCS615
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: (subset) [PATCH v5 0/5] Add initial support for QCS615 SoC and QCS615 RIDE board
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v6 03/12] arm64: dts: qcom: sdm845-starqltechn: fix usb regulator mistake
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3] arm64: dts: qcom: Add coresight nodes for QCS615
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v4 RESEND] arm64: dts: qcom: qcs615: Add QUPv3 configuration
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v4 5/6] of: Add #address-cells/#size-cells in the device-tree root empty node
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/7] dtbindings: display: bcm2711-hdmi: Correct bindings for 2712
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 3/7] dt-bindings: gpio: brcmstb: add gpio-line-name
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCHv2] arm64: dts: ti: k3-j721e-beagleboneai64: Enable ACSPCIE output for PCIe1
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- [PATCH 4/7] arm64: dts: broadcom: Fix device tree warnings for BCM2712 display pipeline
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- Re: [PATCH 4/7] arm64: dts: broadcom: Fix device tree warnings for BCM2712 display pipeline
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/4] dt-bindings: power: supply: add max77759-fg flavor and don't require nvme address
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3] arm64: dts: qcom: qcs6490-rb3gen2: enable Bluetooth
- From: Janaki Ramaiah Thota <quic_janathot@xxxxxxxxxxx>
- Re: [PATCH 6/7] arm: dts: broadcom: Add interrupt-controller flag for intc on BCM2711
- From: Stefan Wahren <wahrenst@xxxxxxx>
- Re: [PATCH 4/6] arm64: dts: qcom: x1e80100: Add CAMCC block definition
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: enable rng on all rk356x
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH 4/7] arm64: dts: broadcom: Fix device tree warnings for BCM2712 display pipeline
- From: Maxime Ripard <mripard@xxxxxxxxxx>
- Re: [PATCH v2 6/6] arm64: dts: qcom: qcs615: enable pcie for qcs615 platform dts
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: mmc: marvell,xenon-sdhci: Simplify Armada 3700 if/then schema
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v1 0/2] Add Nuvoton NCT7718W IIO driver
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v4 1/2] dt-bindings: cpufreq: Document support for Airoha EN7581 CPUFreq
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCHv2] arm64: dts: ti: k3-j721e-beagleboneai64: Enable ACSPCIE output for PCIe1
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 3/3] arm64: dts: qcom: qcs615-ride: Enable UFS node
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH 1/3] arm64: dts: qcom: sc7280: Increase config size to 256MB for ECAM feature
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- [PATCH] arm64: dts: rockchip: Describe why is HWRNG disabled in RK356x base dtsi
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH 4/4] arm64: dts: exynos: gs101-oriole: enable Maxim max77759 fuel gauge
- From: Thomas Antoine <t.antoine@xxxxxxxxxxxx>
- Re: [PATCH v3 2/3] arm64: dts: qcom: qcs615: add UFS node
- From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
- Re: [PATCH v6 08/12] arm64: dts: qcom: sdm845-starqltechn: add display PMIC
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- [PATCHv3 1/2] dt-bindings: mfd: syscon: Add ti,j721e-acspcie-proxy-ctrl compatible
- From: Romain Naour <romain.naour@xxxxxxxx>
- Re: [PATCH v1 04/10] phy: phy-rockchip-samsung-hdptx: Add support for eDP mode
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- Re: [PATCH 2/4] dt-bindings: power: supply: add max77759-fg flavor and don't require nvme address
- From: Thomas Antoine <t.antoine@xxxxxxxxxxxx>
- Re: [PATCH v2 1/2] arm64: dts: qcom: sm8550: correct MDSS interconnects
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: light: Add support for the TI OPT4048 color sensor
- From: Mehdi Djait <mehdi.djait@xxxxxxxxxxxxxxx>
- Re: [PATCH 3/4] arm64: defconfig: enable Maxim max1720x driver
- From: Thomas Antoine <t.antoine@xxxxxxxxxxxx>
- Re: [PATCHv2] arm64: dts: ti: k3-j721e-beagleboneai64: Enable ACSPCIE output for PCIe1
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- [PATCHv3 2/2] arm64: dts: ti: k3-j721e-beagleboneai64: Enable ACSPCIE output for PCIe1
- From: Romain Naour <romain.naour@xxxxxxxx>
- [PATCH 7/7] arm64: dts: broadcom: Fix device tree errors on BCM2712.
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- Re: of_unittest: Missing #address & #size-cells warning
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
- From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: qcm2290: Add uart3 node
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- [PATCH 2/7] dtbindings: display: Fix BCM2835 HVS bindings for BCM2712
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: qcom: x1e80100-crd: Add USB multiport fingerprint reader
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- [PATCH 6/7] arm: dts: broadcom: Add interrupt-controller flag for intc on BCM2711
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v4 5/6] of: Add #address-cells/#size-cells in the device-tree root empty node
- From: Herve Codina <herve.codina@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] pwm: atcpit100: add Andes PWM driver support
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH 5/7] arm64: dts: broadcom: Add interrupt-controller flag for intc on BCM2712
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 3/7] dt-bindings: gpio: brcmstb: add gpio-line-name
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 1/7] dtbindings: display: bcm2711-hdmi: Correct bindings for 2712
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH 0/7] drm/vc4: Fixup DT and DT binding issues from recent patchset
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH RESEND 2/2] dt-bindings: timer: fsl,imxgpt: Document fsl,imx35-gpt
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH v4 3/3] arm64: dts: qcom: qcs615: add the APPS SMMU node
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- [PATCH v6 0/4] Timestamp and PulSAR support for ad4000
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- Re: [PATCH v2 11/18] arm64: dts: mediatek: mt7988: add chosen node on bpi-r4
- From: Frank Wunderlich <linux@xxxxxxxxx>
- Re: [PATCH 4/6] arm64: dts: qcom: x1e80100: Add CAMCC block definition
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
- From: "Cheng Jiang (IOE)" <quic_chejiang@xxxxxxxxxxx>
- [PATCH v2 09/18] arm64: dts: mediatek: mt7988: add operating-points
- From: Frank Wunderlich <linux@xxxxxxxxx>
- Re: [PATCH v4 10/10] arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F)
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v5 4/4] mailbox: add Microchip IPC support
- From: Valentina Fernandez <valentina.fernandezalanis@xxxxxxxxxxxxx>
- [PATCH v5 1/4] riscv: sbi: vendorid_list: Add Microchip Technology to the vendor list
- From: Valentina Fernandez <valentina.fernandezalanis@xxxxxxxxxxxxx>
- Re: [PATCH v2] of: WARN on deprecated #address-cells/#size-cells handling
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v6 3/4] iio: adc: ad4000: Use device specific timing for SPI transfers
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v6 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v5 3/4] dt-bindings: mailbox: add binding for Microchip IPC mailbox controller
- From: Valentina Fernandez <valentina.fernandezalanis@xxxxxxxxxxxxx>
- [PATCH v5 2/4] riscv: export __cpuid_to_hartid_map
- From: Valentina Fernandez <valentina.fernandezalanis@xxxxxxxxxxxxx>
- [PATCH v5 0/4] Add Microchip IPC mailbox
- From: Valentina Fernandez <valentina.fernandezalanis@xxxxxxxxxxxxx>
- Re: [PATCH v5 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- [PATCH v6 4/4] iio: adc: ad4000: Add support for PulSAR devices
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- Re: [PATCH v2 11/18] arm64: dts: mediatek: mt7988: add chosen node on bpi-r4
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 4/4] arm64: dts: exynos: gs101-oriole: enable Maxim max77759 fuel gauge
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v6 03/12] arm64: dts: qcom: sdm845-starqltechn: fix usb regulator mistake
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- Re: [PATCH 3/4] arm64: defconfig: enable Maxim max1720x driver
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v4 4/6] PCI: of_property: Constify parameter in of_pci_get_addr_flags()
- From: Herve Codina <herve.codina@xxxxxxxxxxx>
- Re: [PATCH 5/6] arm64: dts: rockchip: fix pwm-fan node for Radxa ROCK 5B
- From: Alexey Charkov <alchark@xxxxxxxxx>
- Re: [PATCH v6 08/12] arm64: dts: qcom: sdm845-starqltechn: add display PMIC
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- [PATCH RESEND 1/2] dt-bindings: timer: fsl,imxgpt: Fix the fsl,imx7d-gpt fallback
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH v6 08/12] arm64: dts: qcom: sdm845-starqltechn: add display PMIC
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- [PATCH v4 6/6] PCI: of: Create device-tree PCI host bridge node
- From: Herve Codina <herve.codina@xxxxxxxxxxx>
- [PATCH v4 3/6] PCI: of_property: Add support for NULL pdev in of_pci_set_address()
- From: Herve Codina <herve.codina@xxxxxxxxxxx>
- [PATCH v4 1/6] driver core: Introduce device_{add,remove}_of_node()
- From: Herve Codina <herve.codina@xxxxxxxxxxx>
- [PATCH v4 2/6] PCI: of: Use device_{add,remove}_of_node() to attach of_node to existing device
- From: Herve Codina <herve.codina@xxxxxxxxxxx>
- [PATCH v4 0/6] Add support for the PCI host bridge device-tree node creation.
- From: Herve Codina <herve.codina@xxxxxxxxxxx>
- [PATCH RESEND v2] ARM: dts: imx6qdl-apalis: Change to "adi,force-bt656-4"
- From: Fabio Estevam <festevam@xxxxxxxxx>
- [PATCH v2 06/18] arm64: dts: mediatek: mt7988: add thermal trips to bpi-r4
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v2 08/18] arm64: dts: mediatek: mt7988: add mcu-sys node for cpu
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH 4/4] arm64: dts: exynos: gs101-oriole: enable Maxim max77759 fuel gauge
- From: Thomas Antoine via B4 Relay <devnull+t.antoine.uclouvain.be@xxxxxxxxxx>
- [PATCH 2/4] dt-bindings: power: supply: add max77759-fg flavor and don't require nvme address
- From: Thomas Antoine via B4 Relay <devnull+t.antoine.uclouvain.be@xxxxxxxxxx>
- [PATCH 0/4] Google Pixel 6 (oriole): max77759 fuel gauge enablement and driver support
- From: Thomas Antoine via B4 Relay <devnull+t.antoine.uclouvain.be@xxxxxxxxxx>
- [PATCH 3/4] arm64: defconfig: enable Maxim max1720x driver
- From: Thomas Antoine via B4 Relay <devnull+t.antoine.uclouvain.be@xxxxxxxxxx>
- [PATCH 1/4] power: supply: add support for max77759 fuel gauge
- From: Thomas Antoine via B4 Relay <devnull+t.antoine.uclouvain.be@xxxxxxxxxx>
- Re: [PATCH v5 2/4] rtc: s32g: add NXP S32G2/S32G3 SoC support
- From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- Re: [PATCH v3 00/11] Add support for videocc, camcc, dispcc and gpucc on Qualcomm QCS615 platform
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 16/18] arm64: dts: mediatek: mt7988: add i2c-mux on bpi-r4
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v2 02/18] arm64: dts: mediatek: mt7988: add mmc support
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v2 00/18] continue mt7988 devicetree work
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v2 17/18] arm64: dts: mediatek: mt7988: enable ssusb1 on bpi-r4
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v2 11/18] arm64: dts: mediatek: mt7988: add chosen node on bpi-r4
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v2 15/18] arm64: dts: mediatek: mt7988: add proc-supply for cpus on bpi-r4
- From: Frank Wunderlich <linux@xxxxxxxxx>
- Re: [PATCH v2 2/2] pwm: atcpit100: add Andes PWM driver support
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH v2 14/18] arm64: dts: mediatek: mt7988: add pmic on bpi-r4
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v2 12/18] arm64: dts: mediatek: mt7988: add missing clock-div property for i2c
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v2 07/18] arm64: dts: mediatek: mt7988: add reserved memory
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v2 18/18] arm64: dts: mediatek: mt7988: enable pwm on bpi-r4
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v2 05/18] arm64: dts: mediatek: mt7988: add thermal-zone
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v2 10/18] arm64: dts: mediatek: mt7988: enable serial0 on bpi-r4
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v2 13/18] arm64: dts: mediatek: mt7988: add i2c to bpi-r4 board
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v2 01/18] arm64: dts: mediatek: mt7988: enable watchdog on bpi-r4
- From: Frank Wunderlich <linux@xxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
- From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- [PATCH v2 04/18] arm64: dts: mediatek: mt7988: add lvts node
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v2 03/18] arm64: dts: mediatek: mt7988: add fixed regulators for 1v8 and 3v3
- From: Frank Wunderlich <linux@xxxxxxxxx>
- Re: [PATCH v3 05/11] dt-bindings: clock: Add Qualcomm QCS615 Display clock controller
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: enable rng on all rk356x
- From: "Diederik de Haas" <didi.debian@xxxxxxxxx>
- Aw: Re: [PATCH v1 1/3] arm64: dts: marvell: Fix anyOf conditional failed
- From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
- [PATCH v5 07/10] arm64: dts: rp1: Add support for RaspberryPi's RP1 device
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v5 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v6 10/12] arm64: dts: qcom: sdm845-starqltechn: add initial sound support
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- Re: [PATCH v2] dt-bindings: display/msm: qcom, sa8775p-mdss: fix the example
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3] arm64: dts: qcom: qcs6490-rb3gen2: enable Bluetooth
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- [PATCH v5 09/10] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v5 10/10] arm64: defconfig: Enable RP1 misc/clock/gpio drivers
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v5 08/10] misc: rp1: RaspberryPi RP1 misc driver
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v5 05/10] clk: rp1: Add support for clocks provided by RP1
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v5 06/10] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v5 03/10] dt-bindings: pci: Add common schema for devices accessible through PCI BARs
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v5 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v5 01/10] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v5 00/10] Add support for RaspberryPi RP1 PCI device using a DT overlay
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCHv2] arm64: dts: ti: k3-j721e-beagleboneai64: Enable ACSPCIE output for PCIe1
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- Re: [PATCH v5 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v5 0/5] Add pinctrl support for mt7988
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v5 4/5] arm64: dts: mediatek: mt7988: add pinctrl support
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v5 3/5] dt-bindings: pinctrl: add binding for MT7988 SoC
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v5 1/5] pinctrl: mediatek: add support for MTK_PULL_PD_TYPE
- From: Frank Wunderlich <linux@xxxxxxxxx>
- [PATCH v5 2/5] pinctrl: mediatek: add MT7988 pinctrl driver
- From: Frank Wunderlich <linux@xxxxxxxxx>
- Re: [PATCHv2] arm64: dts: ti: k3-j721e-beagleboneai64: Enable ACSPCIE output for PCIe1
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: light: Add support for the TI OPT4048 color sensor
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v5 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 2/7] iio: accel: kx022a: Support ICs with different G-ranges
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [PATCH v5 5/5] arm64: dts: mediatek: mt7988: add pinctrl subnodes for bpi-r4
- From: Frank Wunderlich <linux@xxxxxxxxx>
- Re: [PATCHv2] arm64: dts: ti: k3-j721e-beagleboneai64: Enable ACSPCIE output for PCIe1
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- Re: [PATCH v6 06/12] arm64: dts: qcom: sdm845-starqltechn: add gpio keys
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- Re: [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v6 07/12] arm64: dts: qcom: sdm845-starqltechn: add max77705 PMIC
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- Re: [PATCH v5 2/4] dmaengine: gpi: Add Lock and Unlock TRE support to access I2C exclusively
- From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: enable rng on all rk356x
- From: Marcin Juszkiewicz <marcin.juszkiewicz@xxxxxxxxxx>
- Re: [PATCH v5 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
- From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
- Re: [PATCH v5 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
- From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
- Re: [PATCH v9 5/9] power: supply: max17042: add max77705 fuel gauge support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v9 6/9] mfd: Add new driver for MAX77705 PMIC
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v9 8/9] power: supply: max77705: Add charger driver for Maxim 77705
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615
- From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
- Re: [PATCH] media: dt-bindings: sony,imx415: add required clock-names property
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v9 9/9] leds: max77705: Add LEDs support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v2] arm64: dts: rockchip: increase gmac rx_delay to 0x11 on rk3399-puma
- From: Jakob Unterwurzacher <jakobunt@xxxxxxxxx>
- Re: [PATCH v6 2/3] arm64: dts: qcom: move pon reboot-modes from pm8150.dtsi to board files
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 2/7] iio: accel: kx022a: Support ICs with different G-ranges
- From: Mehdi Djait <mehdi.djait@xxxxxxxxxxxxxxx>
- Re: [PATCH v9 3/9] dt-bindings: power: supply: max17042: remove reg from required
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v9 2/9] dt-bindings: power: supply: max17042: add max77705 support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCHv2] arm64: dts: ti: k3-j721e-beagleboneai64: Enable ACSPCIE output for PCIe1
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v6 3/3] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCHv2] arm64: dts: ti: k3-j721e-beagleboneai64: Enable ACSPCIE output for PCIe1
- From: Romain Naour <romain.naour@xxxxxxxx>
- Re: [PATCH v2 01/15] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #renesas,sysc-signal-cells
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH 5/5] Input: Add TouchNetix aXiom I2C Touchscreen support
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [PATCH v3 3/4] arm64: dts: qcom: add QCS8300 platform
- From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: increase gmac rx_delay to 0x11 on rk3399-puma
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH 5/5] Input: Add TouchNetix aXiom I2C Touchscreen support
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 3/4] arm64: dts: qcom: add QCS8300 platform
- From: Xin Liu <quic_liuxin@xxxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: increase gmac rx_delay to 0x11 on rk3399-puma
- From: Quentin Schulz <quentin.schulz@xxxxxxxxx>
- [PATCH v9 9/9] leds: max77705: Add LEDs support
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- [PATCH v9 8/9] power: supply: max77705: Add charger driver for Maxim 77705
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- [PATCH v9 6/9] mfd: Add new driver for MAX77705 PMIC
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- [PATCH v9 7/9] input: max77693: add max77705 haptic support
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- [PATCH v9 5/9] power: supply: max17042: add max77705 fuel gauge support
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- [PATCH v9 4/9] dt-bindings: mfd: add maxim,max77705
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- [PATCH v9 3/9] dt-bindings: power: supply: max17042: remove reg from required
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- [PATCH v9 1/9] power: supply: add undervoltage health status property
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- [PATCH v9 2/9] dt-bindings: power: supply: max17042: add max77705 support
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- [PATCH v9 0/9] Add support for Maxim Integrated MAX77705 PMIC
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- RE: [PATCH v3 1/2] dt-bindings: iio: adf4371: add rdiv2 and doubler
- From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
- Re: [PATCH 5/5] Input: Add TouchNetix aXiom I2C Touchscreen support
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH v7 2/2] power: supply: Add STC3117 fuel gauge unit driver
- From: Bhavin Sharma <bhavin.sharma@xxxxxxxxxxxxxxxxx>
- [PATCH v7 1/2] dt-bindings: power: supply: Add STC3117 Fuel Gauge
- From: Bhavin Sharma <bhavin.sharma@xxxxxxxxxxxxxxxxx>
- [PATCH v7 0/2] power: supply: Add STC3117 Fuel Gauge
- From: Bhavin Sharma <bhavin.sharma@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 10/19] drm/imx: Add i.MX8qxp Display Controller pixel engine
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v6 3/3] arm64: dts: qcom: qcs615-ride: Enable PMIC peripherals
- From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
- [PATCH v6 2/3] arm64: dts: qcom: move pon reboot-modes from pm8150.dtsi to board files
- From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
- [PATCH v6 1/3] arm64: dts: qcom: qcs615: Adds SPMI support
- From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
- [PATCH v6 0/3] Add SPMI bus, PMIC for qcs615 and fix reboot-modes etc.
- From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
- Re: [PATCH v3] arm64: dts: qcom: qcs6490-rb3gen2: enable Bluetooth
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3] arm64: dts: qcom: qcs6490-rb3gen2: enable Bluetooth
- From: Janaki Ramaiah Thota <quic_janathot@xxxxxxxxxxx>
- Re: [PATCH v2 2/4] arm64: dts: agilex5: add gmac nodes
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v1 2/2] iio: temperature: Add Nuvoton NCT7718W support
- From: Ming Yu <a0282524688@xxxxxxxxx>
- Re: [PATCH v1 0/2] Add Nuvoton NCT7718W IIO driver
- From: Ming Yu <a0282524688@xxxxxxxxx>
- [PATCH v2 2/2] arm64: dts: qcom: x1e78100-qcp: Enable Type-A USB ports labeled 3 and 4/6
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v2 1/2] arm64: dts: qcom: x1e78100-t14s: Enable support for both Type-A USB ports
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v2 0/2] arm64: dts: qcom: x1e80100: qcp/t14s: Enable USB multi-port controller related ports
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- Re: [PATCH v1 0/2] Add Nuvoton NCT7718W IIO driver
- From: Ming Yu <a0282524688@xxxxxxxxx>
- Re: [PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes
- From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
- [PATCH] arm64: dts: rockchip: increase gmac rx_delay to 0x11 on rk3399-puma
- From: Jakob Unterwurzacher <jakobunt@xxxxxxxxx>
- [PATCH v4 RESEND] arm64: dts: qcom: qcs615: Add QUPv3 configuration
- From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: Add initial support for Samsung Galaxy S20 FE (r8s)
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 10/19] drm/imx: Add i.MX8qxp Display Controller pixel engine
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: (subset) [PATCH v2 4/5] arm64: dts: exynos8895: Add serial_0/1 nodes
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 3/4] arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 5/7] drm/msm: adreno: enable GMU bandwidth for A740 and A750
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v3 2/7] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v2 2/4] arm64: dts: agilex5: add gmac nodes
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: sram: sunxi-sram: Add A100 compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: arm: apple: Add T2 devices
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [no subject]
- Re: [PATCH 1/2] dt-bindings: iio: Add AMS TCS3430 color sensor bindings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: Add TI OPT4048 color sensor bindings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 2/7] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration
- From: Xiangxu Yin <quic_xiangxuy@xxxxxxxxxxx>
- RE: [PATCH 2/2] ARM: dts: microchip: sam9x75_curiosity: Add power monitor support
- From: <Mihai.Sain@xxxxxxxxxxxxx>
- RE: [PATCH 1/2] dt-bindings: PCI: amd-mdb: Add YAML schemas for AMD Versal2 MDB PCIe Root Port Bridge
- From: "Havalige, Thippeswamy" <thippeswamy.havalige@xxxxxxx>
- Re: [PATCH 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- RE: [PATCH 2/2] PCI: amd-mdb: Add AMD MDB Root Port driver
- From: "Havalige, Thippeswamy" <thippeswamy.havalige@xxxxxxx>
- Re: [PATCH] media: dt-bindings: sony,imx415: add required clock-names property
- From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
- [PATCH 6.1 1/2] Revert "arm64: dts: mediatek: mt8195-cherry: Mark USB 3.0 on xhci1 as disabled"
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH 6.1 2/2] arm64: dts: mediatek: mt8195-cherry: Mark USB 3.0 on xhci1 as disabled
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH 6.6 2/2] arm64: dts: mediatek: mt8195-cherry: Mark USB 3.0 on xhci1 as disabled
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- [PATCH 6.6 1/2] Revert "arm64: dts: mediatek: mt8195-cherry: Mark USB 3.0 on xhci1 as disabled"
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: microchip: sam9x75_curiosity: Add power monitor support
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH 1/2] ARM: dts: microchip: sam9x7: Move i2c address/size to dtsi
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: power: domain-idle-state: Allow idle-state-name
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] media: dt-bindings: sony,imx415: add required clock-names property
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 0/2] Adds SPMI bus, PMIC and peripherals for qcs8300-ride
- From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
- Re: [PATCH v5 3/3] arm64: dts: qcom: move pon reboot-modes from pm8150.dtsi to board files
- From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: pwm: add atcpit100-pwm
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 00/11] Add support for videocc, camcc, dispcc and gpucc on Qualcomm QCS615 platform
- From: Taniya Das <quic_tdas@xxxxxxxxxxx>
- Re: [PATCH v3 10/11] clk: qcom: videocc-qcs615: Add QCS615 video clock controller driver
- From: Taniya Das <quic_tdas@xxxxxxxxxxx>
- Re: [PATCH v3 05/11] dt-bindings: clock: Add Qualcomm QCS615 Display clock controller
- From: Taniya Das <quic_tdas@xxxxxxxxxxx>
- Re: [PATCH v4 08/18] dt-bindings: clock: imx8mm: add binding definitions for anatop
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 03/11] dt-bindings: clock: Add Qualcomm QCS615 Camera clock controller
- From: Taniya Das <quic_tdas@xxxxxxxxxxx>
- Re: [PATCH v4 02/18] clk: imx8mp: rename video_pll1 to video_pll
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 03/11] dt-bindings: clock: Add Qualcomm QCS615 Camera clock controller
- From: Taniya Das <quic_tdas@xxxxxxxxxxx>
- Re: [PATCH v4 01/18] clk: imx8mm: rename video_pll1 to video_pll
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v6 1/2] dt-bindings: power: supply: Add STC3117 Fuel Gauge
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v1 7/7] drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v3 0/4] Add i.MX91 platform support
- From: Pengfei Li <pengfei.li_1@xxxxxxx>
- [PATCH v2 15/15] arm64: dts: imx8mm-phycore-som: Add overlay to disable SPI NOR flash
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- [PATCH v2 14/15] arm64: dts: imx8mm-phycore-som: Add no-eth phy overlay
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- [PATCH v2 11/15] arm64: dts: imx8mm-phyboard-polis: Add support for PEB-AV-10
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- [PATCH v2 13/15] arm64: dts: imx8mm-phycore-som: Add overlay for rproc
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- [PATCH v2 12/15] arm64: dts: imx8mm-phyboard-polis: Add overlay for PEB-EVAL-01
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- [PATCH v2 06/15] arm64: dts: imx8mm-phyboard-polis: add RTC description
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- [PATCH v2 08/15] arm64: dts: imx8mm-phygate-tauri-l: Set RTC as wakeup-source
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- [PATCH v2 10/15] arm64: dts: imx8mm-phyboard-polis: Assign missing regulator for bluetooth
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- [PATCH v2 07/15] arm64: dts: imx8mm-phyboard-polis: Set RTC as wakeup-source
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- [PATCH v2 09/15] arm64: dts: imx8mm: move bulk of rtc properties to carrierboards
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- [PATCH v2 04/15] arm64: dts: imx8mm-phycore-som: Assign regulator for dsi to lvds bridge
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- [PATCH v2 05/15] arm64: dts: imx8mm-phycore-som: add descriptions to nodes
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- [PATCH v2 00/15] Update PHYTEC's i.MX8MM DTSs
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- [PATCH v2 02/15] arm64: dts: imx8mm-phycore-som: Fix bluetooth wakeup source
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- [PATCH v2 03/15] arm64: dts: imx8mm-phycore-som: Remove magic-packet property
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- [PATCH v2 01/15] arm64: dts: imx8mm-phycore-som: Keep LDO3 on in suspend
- From: Andrej Picej <andrej.picej@xxxxxxxxx>
- Re: [PATCH v5 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 2/4] dmaengine: gpi: Add Lock and Unlock TRE support to access I2C exclusively
- From: Vinod Koul <vkoul@xxxxxxxxxx>
- Re: [PATCH v3 7/7] iio: accel: kx022a: align with subsystem way
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- Re: [PATCH v1 02/10] dt-bindings: display: rockchip: analogix-dp: Add support for RK3588
- From: Damon Ding <damon.ding@xxxxxxxxxxxxxx>
- [PATCH v2 2/2] pwm: atcpit100: add Andes PWM driver support
- From: Ben Zong-You Xie <ben717@xxxxxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: pwm: add atcpit100-pwm
- From: Ben Zong-You Xie <ben717@xxxxxxxxxxxxx>
- [PATCH v2 0/2] pwm: add PWM driver for atcpit100
- From: Ben Zong-You Xie <ben717@xxxxxxxxxxxxx>
- Re: [PATCH v1 7/7] drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- [PATCH] dt-bindings: soc: fsl: cpm_qe: Limit matching to nodes with "fsl,qe"
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: allwinner: a100: Add syscon nodes
- From: Parthiban <parthiban@xxxxxxxxxxx>
- [PATCH 2/2] arm64: dts: allwinner: a100: Add syscon nodes
- From: Cody Eksal <masterr3c0rd@epochal.quest>
- [PATCH 1/2] dt-bindings: sram: sunxi-sram: Add A100 compatible
- From: Cody Eksal <masterr3c0rd@epochal.quest>
- [PATCH 0/2] sunxi: Add A100 syscon nodes
- From: Cody Eksal <masterr3c0rd@epochal.quest>
- Re: [PATCH v2 6/6] arm64: dts: qcom: qcs615: enable pcie for qcs615 platform dts
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v2 5/6] arm64: dts: qcom: qcs615: enable pcie for qcs615 soc
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v3 00/11] Add support for videocc, camcc, dispcc and gpucc on Qualcomm QCS615 platform
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v2 0/8] MT8188 DT and binding fixes
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- Re: [PATCH v5 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
- From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
- Re: [PATCH v2 0/4] arm64: dts: rockchip: cosmetic changes for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- Re: [PATCH v1 1/2] dt-bindings: iio: adc: Add binding for Nuvoton NCT720x ADCs
- From: Yu-Hsian Yang <j2anfernee@xxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: enable rng on all rk356x
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH 0/5] thermal: multi-sensor aggregation support
- From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
- Re: [PATCH v1 04/10] phy: phy-rockchip-samsung-hdptx: Add support for eDP mode
- From: Damon Ding <damon.ding@xxxxxxxxxxxxxx>
- [PATCH v4 4/4] arm64: dts: mediatek: Modify audio codec name for pmic
- From: Zhengqiao Xia <xiazhengqiao@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 3/4] arm64: dts: mediatek: Add exton node for DP bridge
- From: Zhengqiao Xia <xiazhengqiao@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 2/4] arm64: dts: mediatek: Add MT8186 Chinchou Chromebooks
- From: Zhengqiao Xia <xiazhengqiao@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 1/4] dt-bindings: arm: mediatek: Add MT8186 Chinchou Chromebook
- From: Zhengqiao Xia <xiazhengqiao@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 0/4] arm64: dts: mediatek: Add MT8186 Chinchou
- From: Zhengqiao Xia <xiazhengqiao@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v7 3/3] clk: aspeed: add AST2700 clock driver.
- From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
- Re: [PATCH v2 0/4] arm64: dts: rockchip: cosmetic changes for Radxa ROCK 5B
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- [DO NOT MERGE PATCH v5 19/19] arm64: dts: imx8qxp-mek: Add MX8-DLVDS-LCD1 display module support
- From: Liu Ying <victor.liu@xxxxxxx>
- [DO NOT MERGE PATCH v5 18/19] arm64: dts: imx8qxp-mek: Enable display controller
- From: Liu Ying <victor.liu@xxxxxxx>
- [DO NOT MERGE PATCH v5 17/19] arm64: dts: imx8qxp: Add MIPI-LVDS combo subsystems
- From: Liu Ying <victor.liu@xxxxxxx>
- [DO NOT MERGE PATCH v5 16/19] arm64: dts: imx8qxp: Add display controller subsystem
- From: Liu Ying <victor.liu@xxxxxxx>
- [DO NOT MERGE PATCH v5 15/19] dt-bindings: firmware: imx: Add SCU controlled display pixel link nodes
- From: Liu Ying <victor.liu@xxxxxxx>
- [DO NOT MERGE PATCH v5 14/19] dt-bindings: phy: mixel, mipi-dsi-phy: Allow assigned-clock* properties
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v5 13/19] MAINTAINERS: Add maintainer for i.MX8qxp Display Controller
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v5 12/19] drm/imx: Add i.MX8qxp Display Controller KMS
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v5 11/19] drm/imx: Add i.MX8qxp Display Controller interrupt controller
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v5 10/19] drm/imx: Add i.MX8qxp Display Controller pixel engine
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v5 09/19] drm/imx: Add i.MX8qxp Display Controller display engine
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v5 08/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v5 07/19] dt-bindings: interrupt-controller: Add i.MX8qxp Display Controller interrupt controller
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v5 06/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller command sequencer
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v5 05/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller AXI performance counter
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v5 04/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller pixel engine
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v5 03/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller display engine
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v5 02/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller blit engine
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v5 01/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller processing units
- From: Liu Ying <victor.liu@xxxxxxx>
- [PATCH v5 00/19] Add Freescale i.MX8qxp Display Controller support
- From: Liu Ying <victor.liu@xxxxxxx>
- Re: [PATCH v1 6/7] drm/mediatek: mtk_hdmi: Split driver and add common probe function
- From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
- Re: [PATCH v10 1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95
- From: Xu Yang <xu.yang_2@xxxxxxx>
- [PATCH v4 3/3] net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family
- From: Joey Lu <a0987203069@xxxxxxxxx>
- [PATCH v4 2/3] arm64: dts: nuvoton: Add Ethernet nodes
- From: Joey Lu <a0987203069@xxxxxxxxx>
- [PATCH v4 1/3] dt-bindings: net: nuvoton: Add schema for Nuvoton MA35 family GMAC
- From: Joey Lu <a0987203069@xxxxxxxxx>
- [PATCH v4 0/3] Add support for Nuvoton MA35D1 GMAC
- From: Joey Lu <a0987203069@xxxxxxxxx>
- [PATCH v2 3/4] arm64: dts: rockchip: sort properties in .dts for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v2 1/4] arm64: dts: rockchip: sort nodes in .dts for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v2 2/4] arm64: dts: rockchip: sort nodes in root node for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v2 0/4] arm64: dts: rockchip: cosmetic changes for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH v2 4/4] arm64: dts: rockchip: cosmetic changes for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
- From: "Cheng Jiang (IOE)" <quic_chejiang@xxxxxxxxxxx>
- Re: [PATCH v4 09/19] drm/imx: Add i.MX8qxp Display Controller display engine
- From: Liu Ying <victor.liu@xxxxxxx>
- Re: [PATCH 2/5] PCI: sg2042: Add Sophgo SG2042 PCIe driver
- From: Chen Wang <unicorn_wang@xxxxxxxxxxx>
- [PATCH] arm64: dts: rockchip: enable rng on all rk356x
- From: Peter Robinson <pbrobinson@xxxxxxxxx>
- Re: [PATCH v1 04/10] phy: phy-rockchip-samsung-hdptx: Add support for eDP mode
- From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
- Re: [PATCH v4 02/18] clk: imx8mp: rename video_pll1 to video_pll
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v4 02/18] clk: imx8mp: rename video_pll1 to video_pll
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 2/2] iio: light: Add support for the AMS TCS3430 color sensor
- From: Paul Kocialkowski <paulk@xxxxxxxxxxx>
- Re: [PATCH 2/2] iio: light: Add support for the TI OPT4048 color sensor
- From: Paul Kocialkowski <paulk@xxxxxxxxxxx>
- [PATCH v4 16/18] arm64: dts: imx8mp: add PLLs to clock controller module (ccm)
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 15/18] arm64: dts: imx8mn: add PLLs to clock controller module (ccm)
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 14/18] arm64: dts: imx8mm: add PLLs to clock controller module (ccm)
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 13/18] dt-bindings: clock: imx8m-clock: support spread spectrum clocking
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 10/18] dt-bindings: clock: imx8mp: add binding definitions for anatop
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 09/18] dt-bindings: clock: imx8mn: add binding definitions for anatop
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 08/18] dt-bindings: clock: imx8mm: add binding definitions for anatop
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 07/18] arm64: dts: imx8mq: add anatop clocks
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 06/18] arm64: dts: imx8mp: add anatop clocks
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 05/18] arm64: dts: imx8mn: add anatop clocks
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 04/18] arm64: dts: imx8mm: add anatop clocks
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 03/18] dt-bindings: clock: imx8m-anatop: define clocks/clock-names
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 02/18] clk: imx8mp: rename video_pll1 to video_pll
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 01/18] clk: imx8mm: rename video_pll1 to video_pll
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 00/18] Support spread spectrum clocking for i.MX8N PLLs
- From: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 09/17] wifi: cc33xx: Add main.c
- From: "Nemanov, Michael" <michael.nemanov@xxxxxx>
- [PATCH 3/3] arm64: dts: apple: t8012: Add PMGR nodes
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH 2/3] arm64: dts: apple: Add T2 devices
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH 1/3] dt-bindings: arm: apple: Add T2 devices
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH 0/3] Device Tree for Apple T2 (T8012) SoC devices
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v4 10/10] arm64: dts: apple: t8015: Add PMGR nodes
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v4 09/10] arm64: dts: apple: t8011: Add PMGR nodes
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v4 08/10] arm64: dts: apple: t8010: Add PMGR nodes
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v4 07/10] arm64: dts: apple: s8001: Add PMGR nodes
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v4 06/10] arm64: dts: apple: s8000: Add PMGR nodes
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v4 05/10] arm64: dts: apple: t7001: Add PMGR node
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v4 04/10] arm64: dts: apple: t7000: Add PMGR node
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v4 03/10] arm64: dts: apple: s5l8960x: Add PMGR node
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v4 02/10] dt-bindings: arm: apple: apple,pmgr-pwrstate: Add A7-A11 compatibles
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v4 01/10] dt-bindings: arm: apple: apple,pmgr: Add A7-A11 compatibles
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v4 00/10] Add PMGR nodes for Apple A7-A11 SoCs
- From: Nick Chan <towinchenmi@xxxxxxxxx>
- [PATCH v4 3/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add bluetooth node
- From: Jianhua Lu <lujianhua000@xxxxxxxxx>
- [PATCH v4 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add wifi node
- From: Jianhua Lu <lujianhua000@xxxxxxxxx>
- [PATCH v4 1/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add qca6390-pmu node
- From: Jianhua Lu <lujianhua000@xxxxxxxxx>
- Re: [PATCH 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v8 2/2] iio: light: Add support for TI OPT4060 color sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v8 2/2] iio: light: Add support for TI OPT4060 color sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: light: Add support for the AMS TCS3430 color sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: light: Add support for the TI OPT4048 color sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 0/2] power: supply: Add STC3117 Fuel Gauge
- From: Bhavin Sharma <bhavin.sharma@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 09/17] wifi: cc33xx: Add main.c
- From: "Nemanov, Michael" <michael.nemanov@xxxxxx>
- [PATCH v6 2/2] power: supply: Add STC3117 fuel gauge unit driver
- From: Bhavin Sharma <bhavin.sharma@xxxxxxxxxxxxxxxxx>
- [PATCH v6 1/2] dt-bindings: power: supply: Add STC3117 Fuel Gauge
- From: Bhavin Sharma <bhavin.sharma@xxxxxxxxxxxxxxxxx>
- [PATCH v6 0/2] power: supply: Add STC3117 Fuel Gauge
- From: Bhavin Sharma <bhavin.sharma@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/2] Adds SPMI bus, PMIC and peripherals for qcs8300-ride
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 0/2] Adds SPMI bus, PMIC and peripherals for qcs8300-ride
- From: Tingguo Cheng <quic_tingguoc@xxxxxxxxxxx>
- Re: [PATCH 2/2] iio: light: Add support for the AMS TCS3430 color sensor
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v30 00/30] Introduce QC USB SND audio offloading support
- From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxx>
- Re: [PATCH 2/2] iio: light: Add support for the TI OPT4048 color sensor
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 0/2] nvmem: qfprom: add Qualcomm SAR2130P support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index
- From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
- Re: [PATCH v3 3/4] arm64: dts: qcom: add venus node for the qcs615
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v3 2/7] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
- From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
- Re: [PATCH v1 0/2] Add Nuvoton NCT7718W IIO driver
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 1/7] drm/msm: adreno: add defines for gpu & gmu frequency table sizes
- From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
- Re: [PATCH v1 2/2] iio: temperature: Add Nuvoton NCT7718W support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 05/11] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
- From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
- Re: [PATCH v1 0/2] Add Nuvoton NCT7718W IIO driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 04/10] phy: phy-rockchip-samsung-hdptx: Add support for eDP mode
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH 2/2] iio: light: add support for veml6031x00 ALS series
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 2/4] rtc: s32g: add NXP S32G2/S32G3 SoC support
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH v2 4/4] arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14
- From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
- [PATCH v2 3/4] drm/panel-edp: Add unknown BOE panel for HP Omnibook X14
- From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
- [PATCH v2 1/4] dt-bindings: arm: qcom: Add HP Omnibook X 14
- From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
- [PATCH v2 2/4] firmware: qcom: scm: Allow QSEECOM for HP Omnibook X14
- From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
- [PATCH v2 0/4] arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14
- From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
- Re: [PATCH v1 3/3] iio: adc: ad7192: Add sync gpio
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 7/7] iio: accel: kx022a: align with subsystem way
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 7/7] iio: accel: kx022a: align with subsystem way
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 7/7] iio: accel: kx022a: align with subsystem way
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 6/7] iio: accel: kx022a: Support KX134-1211
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 4/7] iio: kx022a: Support ROHM KX134ACR-LBZ
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/7] iio: accel: kx022a: Use cleanup.h helpers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 2/2] power: supply: Add STC3117 fuel gauge unit driver
- From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
- [PATCH 2/2] iio: light: Add support for the AMS TCS3430 color sensor
- From: Paul Kocialkowski <paulk@xxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: iio: Add AMS TCS3430 color sensor bindings
- From: Paul Kocialkowski <paulk@xxxxxxxxxxx>
- [PATCH 2/2] iio: light: Add support for the TI OPT4048 color sensor
- From: Paul Kocialkowski <paulk@xxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: iio: Add TI OPT4048 color sensor bindings
- From: Paul Kocialkowski <paulk@xxxxxxxxxxx>
- Re: [PATCH v5 2/4] iio: adc: ad4000: Add timestamp channel
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 09/19] drm/imx: Add i.MX8qxp Display Controller display engine
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: iio: st-sensors: Re-add IIS2MDC magnetometer
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 6/7] iio: imu: adis16550: add adis16550 support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/7] iio: imu: adis: Add custom ops struct
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/7] iio: imu: adis: Add reset to custom ops
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/7] iio: imu: adis: Remove documented not used elements
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v7 8/8] iio: adc: ad4851: add ad485x driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: iio: adf4371: add rdiv2 and doubler
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 2/2] pmdomain: core: Support naming idle states
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: power: domain-idle-state: Allow idle-state-name
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- [PATCH 0/2] Allow naming pmdomain idle states
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- Re: [PATCH v5 0/1] riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function
- From: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
- Re: [PATCH V6 1/4] interconnect: qcom: Add multidev EPSS L3 support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: qcom: x1e78100-qcp: Enable Type-A USB ports labeled 3 and 4/6
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: qcom: x1e78100-t14s: Enable support for both Type-A USB ports
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH V6 1/4] interconnect: qcom: Add multidev EPSS L3 support
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH V6 1/4] interconnect: qcom: Add multidev EPSS L3 support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH] media: dt-bindings: sony,imx415: add required clock-names property
- From: Matthias Fend <matthias.fend@xxxxxxxxx>
- Re: [PATCH 0/2] Drop BU27008 and BU27010
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- Re: [PATCH v4 4/4] arm64: dts: qcom: ipq6018: add LDOA2 regulator
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 3/4] arm64: dts: qcom: ipq6018: move mp5496 regulator out of soc dtsi
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 0/2] Drop BU27008 and BU27010
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- Re: [PATCH v4 2/4] arm64: dts: qcom: ipq6018: add 1.5GHz CPU Frequency
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/4] arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH] RFC: arm64: dts: qcom: Disable USB U1/U2 entry for QC targets
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 0/2] Drop BU27008 and BU27010
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: sdm670-google-sargo: add flash leds
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: qcs8300: Add support for clock controllers
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] arm64: dts: qcom: sa8775p: Add CPU OPP tables to scale DDR/L3
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v1 0/3] iio: pressure: bmp280: Minor cleanup
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/3] iio: chemical: bme680: add regulators
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3] arm64: qcom: qcs8300: Add ADSP and CDSP0 fastrpc nodes
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 3/4] arm64: dts: qcom: add venus node for the qcs615
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 20/31] arm64: dts: qcom: ipq5018: move board clocks to ipq5018.dtsi file
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] arm64: dts: qcom: x1e80100: Add PCIe lane equalization preset properties
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH V6 4/4] arm64: dts: qcom: sa8775p: add EPSS l3 interconnect provider
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH V6 1/4] interconnect: qcom: Add multidev EPSS L3 support
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/2] power: supply: max17042: add platform driver variant
- From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
- Re: [PATCH v4 1/3] arm64: dts: qcom: x1e80100-vivobook-s15: Use the samsung,atna33xc20 panel driver
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/5] drm: panel: Add a panel driver for the Summit display
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: Drop Bhupesh Sharma from maintainers
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- Re: [PATCH v7 8/8] iio: adc: ad4851: add ad485x driver
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 3/5] drm: panel: Add a panel driver for the Summit display
- From: Sasha Finkelstein <fnkl.kernel@xxxxxxxxx>
- Re: [PATCH v2 01/31] arm64: dts: qcom: msm8916: correct sleep clock frequency
- From: Stephan Gerhold <stephan@xxxxxxxxxxx>
- Re: [PATCH v2 20/31] arm64: dts: qcom: ipq5018: move board clocks to ipq5018.dtsi file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 00/31] arm64: dts: qcom: move board clocks to SoC DTSI files
- From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
- Re: [PATCH v2 20/31] arm64: dts: qcom: ipq5018: move board clocks to ipq5018.dtsi file
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 01/31] arm64: dts: qcom: msm8916: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 01/31] arm64: dts: qcom: msm8916: correct sleep clock frequency
- From: Stephan Gerhold <stephan@xxxxxxxxxxx>
- Re: [PATCH v2 20/31] arm64: dts: qcom: ipq5018: move board clocks to ipq5018.dtsi file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: iio: accel: fxls8962af: add wakeup-source property
- From: Sean Nyekjaer <sean@xxxxxxxxxx>
- Re: [PATCH v2 20/31] arm64: dts: qcom: ipq5018: move board clocks to ipq5018.dtsi file
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 20/31] arm64: dts: qcom: ipq5018: move board clocks to ipq5018.dtsi file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: iio: accel: fxls8962af: add wakeup-source property
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH] dt-bindings: Drop Bhupesh Sharma from maintainers
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v5 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 27/31] arm64: dts: qcom: sm6375: move board clocks to sm6375.dtsi file
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 29/31] arm64: dts: qcom: sm8650: move board clocks to sm8650.dtsi file
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 28/31] arm64: dts: qcom: sm8550: move board clocks to sm8550.dtsi file
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 26/31] arm64: dts: qcom: sm6115: move board clocks to sm6115.dtsi file
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 25/31] arm64: dts: qcom: sc8280xp: move board clocks to sc8280xp.dtsi file
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 24/31] arm64: dts: qcom: qcm2290: move board clocks to qcm2290.dtsi file
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 23/31] arm64: dts: qcom: ipq9574: move board clocks to ipq9574.dtsi file
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 22/31] arm64: dts: qcom: ipq5424: move board clocks to ipq5424.dtsi file
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 21/31] arm64: dts: qcom: ipq5332: move board clocks to ipq5332.dtsi file
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 20/31] arm64: dts: qcom: ipq5018: move board clocks to ipq5018.dtsi file
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 3/5] drm: panel: Add a panel driver for the Summit display
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v1 06/10] drm/bridge: analogix_dp: Add support for phy configuration.
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [EXT] Re: [PATCH v18 6/8] phy: freescale: Add DisplayPort/HDMI Combo-PHY driver for i.MX8MQ
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v18 6/8] phy: freescale: Add DisplayPort/HDMI Combo-PHY driver for i.MX8MQ
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v5 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: bluetooth: add 'qcom,product-variant'
- From: "Cheng Jiang (IOE)" <quic_chejiang@xxxxxxxxxxx>
- Re: [PATCH v1 2/3] dt-bindings: net: Add QCA6698 Bluetooth
- From: "Cheng Jiang (IOE)" <quic_chejiang@xxxxxxxxxxx>
- Re: [PATCH v3 4/4] arm64: dts: qcom: add base QCS8300 RIDE board
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 31/31] arm64: dts: qcom: q[dr]u1000: move board clocks to qdu1000.dtsi file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 30/31] arm64: dts: qcom: sdm670: move board clocks to sdm670.dtsi file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 29/31] arm64: dts: qcom: sm8650: move board clocks to sm8650.dtsi file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 28/31] arm64: dts: qcom: sm8550: move board clocks to sm8550.dtsi file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 27/31] arm64: dts: qcom: sm6375: move board clocks to sm6375.dtsi file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 26/31] arm64: dts: qcom: sm6115: move board clocks to sm6115.dtsi file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 25/31] arm64: dts: qcom: sc8280xp: move board clocks to sc8280xp.dtsi file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 24/31] arm64: dts: qcom: qcm2290: move board clocks to qcm2290.dtsi file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 23/31] arm64: dts: qcom: ipq9574: move board clocks to ipq9574.dtsi file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 22/31] arm64: dts: qcom: ipq5424: move board clocks to ipq5424.dtsi file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 21/31] arm64: dts: qcom: ipq5332: move board clocks to ipq5332.dtsi file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 20/31] arm64: dts: qcom: ipq5018: move board clocks to ipq5018.dtsi file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 19/31] arm64: dts: qcom: sc8180x: drop extra XO clock frequencies
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 18/31] arm64: dts: qcom: x1e80100: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 17/31] arm64: dts: qcom: sm8650: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 16/31] arm64: dts: qcom: sm8550: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 15/31] arm64: dts: qcom: sm8450: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 14/31] arm64: dts: qcom: sm8350: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 13/31] arm64: dts: qcom: sm8250: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 12/31] arm64: dts: qcom: sm6375: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 11/31] arm64: dts: qcom: sm6125: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 10/31] arm64: dts: qcom: sm4450: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 09/31] arm64: dts: qcom: sdx75: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 08/31] arm64: dts: qcom: sc7280: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 07/31] arm64: dts: qcom: sar2130p: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 06/31] arm64: dts: qcom: qrb4210-rb2: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 05/31] arm64: dts: qcom: q[dr]u1000: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 04/31] arm64: dts: qcom: qcs404: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 03/31] arm64: dts: qcom: msm8994: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 02/31] arm64: dts: qcom: msm8939: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 01/31] arm64: dts: qcom: msm8916: correct sleep clock frequency
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 00/31] arm64: dts: qcom: move board clocks to SoC DTSI files
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 2/2] arm64: dts: rockchip: fix USB 3.0 bottom port for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 1/2] arm64: dts: rockchip: use Type-C port as USB HOST port for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH] arm64: dts: rockchip: remove usb_host0_ohci for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 3/4] arm64: dts: rockchip: sort properties in .dts for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 4/4] arm64: dts: rockchip: cosmetic changes for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 0/4] arm64: dts: rockchip: cosmetic changes for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 2/4] arm64: dts: rockchip: sort nodes in root node for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 1/4] arm64: dts: rockchip: sort nodes in .dts for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 4/6] arm64: dts: rockchip: convert leds node to "pwm-led" for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 2/6] arm64: dts: rockchip: add regulator for NPU for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 3/6] arm64: dts: rockchip: fix pmic regulators for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 1/6] arm64: dts: rockchip: fix regulators for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 5/6] arm64: dts: rockchip: fix pwm-fan node for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 0/6] arm64: dts: rockchip: sync dts with schematic for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- [PATCH 6/6] arm64: dts: rockchip: fix rtc node for Radxa ROCK 5B
- From: FUKAUMI Naoki <naoki@xxxxxxxxx>
- Re: [PATCH v6 13/13] riscv: Add qspinlock support
- From: Guo Ren <guoren@xxxxxxxxxx>
- Re: [PATCH v1 3/3] iio: pressure: bmp280: Make time vars intuitive and move to fsleep
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v1 1/3] dt-bindings: iio: pressure: bmp085: Add SPI interface
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v4 3/3] iio: chemical: bme680: add power management
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v4 1/3] dt-bindings: iio: bosch,bme680: Move from trivial-devices and add supplies
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH RFT 4/4] arm64: dts: qcom: msm8994: Describe USB interrupts
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- [PATCH RFT 3/4] arm64: dts: qcom: msm8996: Fix up USB3 interrupts
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- [PATCH RFT 2/4] dt-bindings: usb: qcom,dwc3: Fix MSM8994 interrupt spec
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- [PATCH RFT 1/4] dt-bindings: usb: qcom,dwc3: Make ss_phy_irq optional for MSM8996
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- [RFT PATCH 0/4] More QC DWC3 fixups
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- Re: [PATCH v2 2/5] PCI: stm32: Add PCIe host support for STM32MP25
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/5] PCI: stm32: Add PCIe host support for STM32MP25
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH 2/2] PCI: amd-mdb: Add AMD MDB Root Port driver
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH 0/5] thermal: multi-sensor aggregation support
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [PATCH 2/5] PCI: sg2042: Add Sophgo SG2042 PCIe driver
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v2 0/8] pci: qcom: Add QCS8300 PCIe support
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v2 0/8] pci: qcom: Add QCS8300 PCIe support
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v2 4/8] PCI: qcom: Add QCS8300 PCIe support
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH 3/5] drm/msm: mdss: Add QCS8300 support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v4 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v9 1/6] misc: Add support for LAN966x PCI device
- From: Herve Codina <herve.codina@xxxxxxxxxxx>
- [PATCH v10 1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95
- From: Amit Singh Tomar <amitsinght@xxxxxxxxxxx>
- [PATCH v2 3/3] arm64: dts: qcom: x1e80100-romulus: Set up PS8830s
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- [PATCH v2 2/3] arm64: dts: qcom: x1e80100-romulus: Set up PCIe3 / SDCard reader
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- [PATCH v2 1/3] arm64: dts: qcom: x1e80100-romulus: Configure audio
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- [PATCH v2 0/3] More Surface Laptop 7 features
- From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
- Re: [PATCH v1 3/3] Bluetooth: btqca: Add QCA6698 support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v1 2/3] dt-bindings: net: Add QCA6698 Bluetooth
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v3 3/7] drm/msm: adreno: dynamically generate GMU bw table
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v22 1/4] dt-bindings: pwm: Add RZ/G2L GPT binding
- From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
- Re: [PATCH v4 08/10] misc: rp1: RaspberryPi RP1 misc driver
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v6 13/13] riscv: Add qspinlock support
- From: Guo Ren <guoren@xxxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 3/3] arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth
- From: Maud Spierings <maud_spierings@xxxxxxxxxxx>
- [PATCH v7 8/8] iio: adc: ad4851: add ad485x driver
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- [PATCH v7 7/8] dt-bindings: iio: adc: add ad4851
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- [PATCH v7 5/8] iio: adc: adi-axi-adc: set data format
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- [PATCH v7 6/8] iio: adc: adi-axi-adc: add oversampling
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- [PATCH v7 2/8] iio: backend: add support for data size set
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- [PATCH v7 3/8] iio: backend: add API for oversampling
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- [PATCH v7 4/8] iio: adc: adi-axi-adc: add interface type
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- [PATCH v7 1/8] iio: backend: add API for interface get
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- [PATCH v7 0/8] Add support for AD485x DAS Family
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- [PATCH v3 2/2] iio: frequency: adf4371: add ref doubler and div2
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: iio: adf4371: add rdiv2 and doubler
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- [PATCH v3 0/2] Add ADF4371 Reference Doubler and Reference Divider
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: clock: qcom,sm8550-dispcc: Add SM8750 DISPCC
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3 4/7] drm/msm: adreno: find bandwidth index of OPP and set it along freq index
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 3/3] clk: spacemit: Add clock support for Spacemit K1 SoC
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: iio: light: Drop BU27008 and BU27010
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: iio: st-sensors: Re-add IIS2MDC magnetometer
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: qcs615-ride: Enable ethernet node
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v3 5/7] drm/msm: adreno: enable GMU bandwidth for A740 and A750
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/7] drm/msm: adreno: add plumbing to generate bandwidth vote table for GMU
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
- From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- Re: [PATCH v1 2/3] iio: pressure: bmp280: Use sizeof() for denominator
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: add support for device tree overlays for Radxa devices
- From: "Diederik de Haas" <didi.debian@xxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: qcs615-ride: Enable ethernet node
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v5 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95
- From: Amit Singh Tomar <amitsinght@xxxxxxxxxxx>
- [PATCH] dt-bindings: iio: accel: fxls8962af: add wakeup-source property
- From: Sean Nyekjaer <sean@xxxxxxxxxx>
- Re: [PATCH v1 3/3] iio: pressure: bmp280: Make time vars intuitive and move to fsleep
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH] dt-bindings: iio: st-sensors: Re-add IIS2MDC magnetometer
- From: Sean Nyekjaer <sean@xxxxxxxxxx>
- Re: [PATCH v1 1/2] dt-bindings: iio: adc: Add binding for Nuvoton NCT720x ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- RE: [PATCH 04/12] dt-bindings: clock: renesas: Document RZ/G3E SoC CPG
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [PATCH v5 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
- From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
- [PATCH v5 3/4] soc: qcom: geni-se: Do not keep GPIOs to sleep state for shared SE usecase
- From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
- [PATCH v5 2/4] dmaengine: gpi: Add Lock and Unlock TRE support to access I2C exclusively
- From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
- [PATCH v5 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
- From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
- [PATCH v5 0/4] Enable shared SE support over I2C
- From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
- Re: [PATCH v4 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
- From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 2/3] iio: chemical: bme680: add regulators
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 3/3] iio: chemical: bme680: add power management
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v3 3/3] can: flexcan: add NXP S32G2/S32G3 SoC support
- From: Ciprian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- [PATCH v3 2/3] can: flexcan: Add quirk to handle separate interrupt lines for mailboxes
- From: Ciprian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- [PATCH v3 1/3] dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
- From: Ciprian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- [PATCH v3 0/3] add FlexCAN support for S32G2/S32G3 SoCs
- From: Ciprian Costea <ciprianmarian.costea@xxxxxxxxxxx>
- Re: [PATCH 0/2] Drop BU27008 and BU27010
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: add support for device tree overlays for Radxa devices
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH v4 2/2] power: supply: max17042: add platform driver variant
- From: Amit Singh Tomar <amitsinght@xxxxxxxxxxx>
- Re: [PATCH 8/8] drm/msm/dp: Support external GPIO HPD with 3rd pinctrl chip
- From: neil.armstrong@xxxxxxxxxx
- Re: [PATCH 4/8] drm/msm/dp: Add DisplayPort support for QCS615
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 7/8] drm/msm/dp: Retry Link Training 2 with lower pattern
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 6/8] drm/msm/dp: Add maximum width limitation for modes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 5/8] drm/msm/dp: Add support for lane mapping configuration
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 2/9] media: i2c: ds90ub960: Replace aliased clients list with bitmap
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
- Re: [PATCH 8/8] drm/msm/dp: Support external GPIO HPD with 3rd pinctrl chip
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 3/5] drm/msm: mdss: Add QCS8300 support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 4/5] drm/msm/dpu: Add QCS8300 support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v6 4/4] w1: ds2482: Fix datasheet URL
- From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
- [PATCH v6 2/4] w1: ds2482: switch to devm_kzalloc() from kzalloc()
- From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
- [PATCH v6 1/4] dt-bindings: w1: ds2482: Add vcc-supply property
- From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
- [PATCH v6 3/4] w1: ds2482: Add regulator support
- From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
- [PATCH v6 0/4] Add support for attaching a regulator to w1: ds2482
- From: Kryštof Černý via B4 Relay <devnull+cleverline1mc.gmail.com@xxxxxxxxxx>
- [PATCH v5 4/4] iio: adc: ad4000: Add support for PulSAR devices
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v5 2/4] iio: adc: ad4000: Add timestamp channel
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v5 3/4] iio: adc: ad4000: Use device specific timing for SPI transfers
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v5 1/4] dt-bindings: iio: adc: adi,ad4000: Add PulSAR
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v5 0/4] Timestamp and PulSAR support for ad4000
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- Re: [PATCH net-next 2/2] net: dsa: microchip: Add SGMII port support to KSZ9477 switch
- From: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
- Re: [PATCH v6 13/13] riscv: Add qspinlock support
- From: Guo Ren <guoren@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: add support for device tree overlays for Radxa devices
- From: "Diederik de Haas" <didi.debian@xxxxxxxxx>
- Re: [PATCH v3] dt-bindings: net: can: atmel: Convert to json schema
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH can-next v3] dt-bindings: can: convert tcan4x5x.txt to DT schema
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: add support for device tree overlays for Radxa devices
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: power: supply: Add STC3117 Fuel Gauge
- From: Bhavin Sharma <bhavin.sharma@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: power: supply: Add STC3117 Fuel Gauge
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 0/9] misc: Support TI FPC202 dual-port controller
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
- Re: [PATCH v6 13/13] riscv: Add qspinlock support
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: power: supply: Add STC3117 Fuel Gauge
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v6 13/13] riscv: Add qspinlock support
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH v5 2/2] power: supply: Add STC3117 fuel gauge unit driver
- From: Bhavin Sharma <bhavin.sharma@xxxxxxxxxxxxxxxxx>
- [PATCH v5 1/2] dt-bindings: power: supply: Add STC3117 Fuel Gauge
- From: Bhavin Sharma <bhavin.sharma@xxxxxxxxxxxxxxxxx>
- [PATCH v5 0/2] power: supply: Add STC3117 Fuel Gauge
- From: Bhavin Sharma <bhavin.sharma@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] media: venus: Add support for static video encoder/decoder declarations
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: qcom: qcs8300-ride: Enable PMIC peripherals
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 4/6] arm64: dts: exynos: gs101: enable snps,dis_rxdet_inp3_quirk for DWC3
- From: André Draszik <andre.draszik@xxxxxxxxxx>
- Re: [PATCH 1/3] media: venus: Add support for static video encoder/decoder declarations
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v6 13/13] riscv: Add qspinlock support
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: qcom: qcs8300-ride: Enable PMIC peripherals
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
[Index of Archives]
[Device Tree Spec]
[Linux USB Devel]
[Video for Linux]
[Scanner Discussion]
[Linux SCSI]
[Samba]
[Yosemite News]