Add support for AD485X fully buffered, 8-channel simultaneous sampling, 16/20-bit, 1 MSPS data acquisition system (DAS) with differential, wide common-mode range inputs. Most of the review comments which make sense in v9 were addressed. Some of them might have been ommitted, especially those that are a matter of preference. Since we reached v10, I tried to cover everything that was pointed out until now. Antoniu Miclaus (9): iio: backend: add API for interface get iio: backend: add support for data size set iio: backend: add API for oversampling iio: adc: adi-axi-adc: add interface type dt-bindings: iio: adc: add ad485x axi variant iio: adc: adi-axi-adc: set data format iio: adc: adi-axi-adc: add oversampling dt-bindings: iio: adc: add ad4851 iio: adc: ad4851: add ad485x driver .../bindings/iio/adc/adi,ad4851.yaml | 153 ++ .../bindings/iio/adc/adi,axi-adc.yaml | 2 + drivers/iio/adc/Kconfig | 14 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ad4851.c | 1316 +++++++++++++++++ drivers/iio/adc/adi-axi-adc.c | 146 +- drivers/iio/industrialio-backend.c | 60 + include/linux/iio/backend.h | 19 + 8 files changed, 1702 insertions(+), 9 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml create mode 100644 drivers/iio/adc/ad4851.c -- 2.48.1
