Add 'maxim,override-mode' property to allow the user to toggle the pin
configured chip operation mode and 'maxim,fsync-config' to configure the
chip for relaying a frame synchronization signal, received from
deserializer, to the attached sensor. The latter is needed for
synchronizing the images in multi-sensor setups.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@xxxxxxxxxxx>
---
.../bindings/media/i2c/maxim,max96717.yaml | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
index d1e8ba6e368ec..fae578d55fd4d 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
@@ -42,10 +42,35 @@ properties:
number must be in range of [0, 10].
gpio-controller: true
+ gpio-reserved-ranges: true
'#clock-cells':
const: 0
+ maxim,override-mode:
+ description: Toggle the operation mode from the pin configured one.
+ type: boolean
+
+ maxim,fsync-config:
+ description:
+ Frame synchronization (FSYNC) is used to align images sent from multiple
+ sources in surround-view applications and is required for concatenation.
+ In FSYNC mode, the deserializer sends a sync signal to each serializer;
+ the serializers then send the signal to the connected sensor.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: FSYNC RX ID, needs to match the TX ID configured in the deserializer.
+ minimum: 0
+ maximum: 31
+ default: 0
+ - description:
+ Output GPIO pin used for sending the FSYNC to the sensor. The pin, however, needs
+ to be excluded from the gpiochip using the gpio-reserved-ranges property since
+ it will be used exclusively for FSYNC generation.
+ minimum: 0
+ maximum: 10
+ default: 0
+
reg:
maxItems: 1
@@ -113,6 +138,9 @@ examples:
#gpio-cells = <2>;
#clock-cells = <0>;
+ gpio-reserved-ranges = <0 1>;
+ maxim,fsync-config = <0 0>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
--
2.34.1
