On Fri, Feb 07, 2025 at 01:29:55PM +0200, Laurentiu Palcu wrote:
> Add 'maxim,override-mode' property to allow the user to toggle the pin
> configured chip operation mode and 'maxim,fsync-config' to configure the
> chip for relaying a frame synchronization signal, received from
> deserializer, to the attached sensor. The latter is needed for
> synchronizing the images in multi-sensor setups.
>
> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@xxxxxxxxxxx>
> ---
> .../bindings/media/i2c/maxim,max96717.yaml | 28 +++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
> index d1e8ba6e368ec..fae578d55fd4d 100644
> --- a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
> @@ -42,10 +42,35 @@ properties:
> number must be in range of [0, 10].
>
> gpio-controller: true
> + gpio-reserved-ranges: true
>
> '#clock-cells':
> const: 0
>
> + maxim,override-mode:
> + description: Toggle the operation mode from the pin configured one.
> + type: boolean
type: flag
> + maxim,fsync-config:
> + description:
> + Frame synchronization (FSYNC) is used to align images sent from multiple
> + sources in surround-view applications and is required for concatenation.
> + In FSYNC mode, the deserializer sends a sync signal to each serializer;
> + the serializers then send the signal to the connected sensor.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + items:
> + - description: FSYNC RX ID, needs to match the TX ID configured in the deserializer.
> + minimum: 0
> + maximum: 31
> + default: 0
> + - description:
> + Output GPIO pin used for sending the FSYNC to the sensor. The pin, however, needs
> + to be excluded from the gpiochip using the gpio-reserved-ranges property since
> + it will be used exclusively for FSYNC generation.
> + minimum: 0
> + maximum: 10
> + default: 0
> +
> reg:
> maxItems: 1
>
> @@ -113,6 +138,9 @@ examples:
> #gpio-cells = <2>;
> #clock-cells = <0>;
>
> + gpio-reserved-ranges = <0 1>;
> + maxim,fsync-config = <0 0>;
> +
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
> --
> 2.34.1
>
Attachment:
signature.asc
Description: PGP signature
