Add Epoch Subsystem (EPSS) L3 interconnect provider node on SA8775P
SoCs. L3 instances on this SoC are same as SM8250 and SC7280 SoCs.
These SoCs use EPSS_L3_PERF register instead of REG_L3_VOTE register for
programming the perf level. This is taken care in the data associated
with the target specific compatible. Since, the HW is same in the all
SoCs with EPSS support, using the same generic compatible for all.
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 3394ae2d1300..d02b4abe9e8d 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/clock/qcom,sa8775p-gcc.h>
#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/firmware/qcom,scm.h>
@@ -4653,6 +4654,15 @@ rpmhpd_opp_turbo_l1: opp-9 {
};
};
+ epss_l3_cl0: interconnect@18590000 {
+ compatible = "qcom,sa8775p-epss-l3",
+ "qcom,epss-l3";
+ reg = <0x0 0x18590000 0x0 0x1000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+ #interconnect-cells = <1>;
+ };
+
cpufreq_hw: cpufreq@18591000 {
compatible = "qcom,sa8775p-cpufreq-epss",
"qcom,cpufreq-epss";
@@ -4666,6 +4676,15 @@ cpufreq_hw: cpufreq@18591000 {
#freq-domain-cells = <1>;
};
+ epss_l3_cl1: interconnect@18592000 {
+ compatible = "qcom,sa8775p-epss-l3",
+ "qcom,epss-l3";
+ reg = <0x0 0x18592000 0x0 0x1000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+ #interconnect-cells = <1>;
+ };
+
remoteproc_gpdsp0: remoteproc@20c00000 {
compatible = "qcom,sa8775p-gpdsp0-pas";
reg = <0x0 0x20c00000 0x0 0x10000>;
--
2.39.2
