On Wed, Feb 05, 2025 at 04:54:38PM +0100, Krzysztof Kozlowski wrote:
> On 05/02/2025 16:53, Krzysztof Kozlowski wrote:
> > On 05/02/2025 16:35, Varadarajan Narayanan wrote:
> >> On Wed, Feb 05, 2025 at 02:47:13PM +0100, Krzysztof Kozlowski wrote:
> >>> On 05/02/2025 11:49, Varadarajan Narayanan wrote:
> >>>> On Mon, Feb 03, 2025 at 05:30:32PM +0100, Krzysztof Kozlowski wrote:
> >>>>> On 28/01/2025 07:27, Varadarajan Narayanan wrote:
> >>>>>>
> >>>>>> @@ -479,6 +519,230 @@ frame@b128000 {
> >>>>>> status = "disabled";
> >>>>>> };
> >>>>>> };
> >>>>>> +
> >>>>>> + pcie1: pcie@18000000 {
> >>>>>> + compatible = "qcom,pcie-ipq5332", "qcom,pcie-ipq9574";
> >>>>>> + reg = <0x00088000 0x3000>,
> >>>>>
> >>>>> So as Konrad pointed out now, this was never tested. It's not we who
> >>>>> should run tests for you. It's you.
> >>>>
> >>>> This was tested and it did not flag an error since it is having the order
> >>>> specified in the bindings. qcom,pcie.yaml has 4 reg specifications. Two of
> >>>
> >>>
> >>> Hm, then please paste results of dtbs_check W=1 testing. Here.
> >>>
> >>> I am 100% sure you have there warning and I don't understand your
> >>> reluctance to run the tests even after pointing it out by two people.
> >>
> >> I ran the tests. Not sure which portions to paste. Have attached the full
> >> output just in case you are interested in some other detail. Please take a
> >> look.
> >>
> >> Thanks
> >> Varada
> >>
> >> $ grep ipq.*dtb dtbs-check.log
> >
> > Where is the command you have used?
export ARCH=arm64
export W=1
export DT_CHECKER_FLAGS='-v -m'
export DT_SCHEMA_FILES=qcom
export CHECK_DTBS=y
make -j 16 dtbs_check &> dtbs-check.log
> Although that might not matter - you skipped several warnings with your
> grep. So maybe you need to fix your process, not sure.
export W=1 is the problem. Kernel Makefile differentiates between 'W' being
set from environment and from command line with this check
ifeq ("$(origin W)", "command line")
KBUILD_EXTRA_WARN := $(W)
endif
I assumed similar to DT_SCHEMA_FILES and DT_CHECKER_FLAGS, W will also be
taken. I was not aware of this differentiation, and the 'export W=1' never
came into effect. I re-ran the command as below and see the warnings
$ make W=1 -j 16 dtbs_check &> dtbs-check2.log
$ grep Warning dtbs-check2.log | grep ipq.*dt
arch/arm64/boot/dts/qcom/ipq5332.dtsi:523.24-625.5: Warning (simple_bus_reg): /soc@0/pcie@18000000: simple-bus unit address format error, expected "88000"
arch/arm64/boot/dts/qcom/ipq5332.dtsi:627.24-729.5: Warning (simple_bus_reg): /soc@0/pcie@20000000: simple-bus unit address format error, expected "80000"
arch/arm64/boot/dts/qcom/ipq5332.dtsi:523.24-625.5: Warning (simple_bus_reg): /soc@0/pcie@18000000: simple-bus unit address format error, expected "88000"
arch/arm64/boot/dts/qcom/ipq5332.dtsi:627.24-729.5: Warning (simple_bus_reg): /soc@0/pcie@20000000: simple-bus unit address format error, expected "80000"
arch/arm64/boot/dts/qcom/ipq5332.dtsi:523.24-625.5: Warning (simple_bus_reg): /soc@0/pcie@18000000: simple-bus unit address format error, expected "88000"
arch/arm64/boot/dts/qcom/ipq5332.dtsi:627.24-729.5: Warning (simple_bus_reg): /soc@0/pcie@20000000: simple-bus unit address format error, expected "80000"
arch/arm64/boot/dts/qcom/ipq5332.dtsi:523.24-625.5: Warning (simple_bus_reg): /soc@0/pcie@18000000: simple-bus unit address format error, expected "88000"
arch/arm64/boot/dts/qcom/ipq5332.dtsi:627.24-729.5: Warning (simple_bus_reg): /soc@0/pcie@20000000: simple-bus unit address format error, expected "80000"
arch/arm64/boot/dts/qcom/ipq5424.dtsi:304.22-355.5: Warning (simple_bus_reg): /soc@0/usb2@1e00000: simple-bus unit address format error, expected "1ef8800"
arch/arm64/boot/dts/qcom/ipq5424.dtsi:395.22-448.5: Warning (simple_bus_reg): /soc@0/usb3@8a00000: simple-bus unit address format error, expected "8af8800"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:877.24-959.5: Warning (simple_bus_reg): /soc@0/pcie@10000000: simple-bus unit address format error, expected "f8000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:961.24-1043.5: Warning (simple_bus_reg): /soc@0/pcie@18000000: simple-bus unit address format error, expected "f0000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:1045.24-1127.5: Warning (simple_bus_reg): /soc@0/pcie@20000000: simple-bus unit address format error, expected "88000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:1129.23-1210.5: Warning (simple_bus_reg): /soc@0/pci@28000000: simple-bus unit address format error, expected "80000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:877.24-959.5: Warning (simple_bus_reg): /soc@0/pcie@10000000: simple-bus unit address format error, expected "f8000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:961.24-1043.5: Warning (simple_bus_reg): /soc@0/pcie@18000000: simple-bus unit address format error, expected "f0000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:1045.24-1127.5: Warning (simple_bus_reg): /soc@0/pcie@20000000: simple-bus unit address format error, expected "88000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:1129.23-1210.5: Warning (simple_bus_reg): /soc@0/pci@28000000: simple-bus unit address format error, expected "80000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:877.24-959.5: Warning (simple_bus_reg): /soc@0/pcie@10000000: simple-bus unit address format error, expected "f8000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:961.24-1043.5: Warning (simple_bus_reg): /soc@0/pcie@18000000: simple-bus unit address format error, expected "f0000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:1045.24-1127.5: Warning (simple_bus_reg): /soc@0/pcie@20000000: simple-bus unit address format error, expected "88000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:1129.23-1210.5: Warning (simple_bus_reg): /soc@0/pci@28000000: simple-bus unit address format error, expected "80000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:877.24-959.5: Warning (simple_bus_reg): /soc@0/pcie@10000000: simple-bus unit address format error, expected "f8000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:961.24-1043.5: Warning (simple_bus_reg): /soc@0/pcie@18000000: simple-bus unit address format error, expected "f0000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:1045.24-1127.5: Warning (simple_bus_reg): /soc@0/pcie@20000000: simple-bus unit address format error, expected "88000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:1129.23-1210.5: Warning (simple_bus_reg): /soc@0/pci@28000000: simple-bus unit address format error, expected "80000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:877.24-959.5: Warning (simple_bus_reg): /soc@0/pcie@10000000: simple-bus unit address format error, expected "f8000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:961.24-1043.5: Warning (simple_bus_reg): /soc@0/pcie@18000000: simple-bus unit address format error, expected "f0000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:1045.24-1127.5: Warning (simple_bus_reg): /soc@0/pcie@20000000: simple-bus unit address format error, expected "88000"
arch/arm64/boot/dts/qcom/ipq9574.dtsi:1129.23-1210.5: Warning (simple_bus_reg): /soc@0/pci@28000000: simple-bus unit address format error, expected "80000"
Will change pcie@xxx to match with the first reg entry and post the next
version.
Thanks
Varada
