On 11:38 Tue 21 Jan , Yixun Lan wrote:
> Implement GPIO functionality which capable of setting pin as
> input, output. Also, each pin can be used as interrupt which
> support rising, failing, or both edge type trigger.
>
> Signed-off-by: Yixun Lan <dlan@xxxxxxxxxx>
> ---
> drivers/gpio/Kconfig | 7 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-spacemit-k1.c | 295 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 303 insertions(+)
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 56fee58e281e7cac7f287eb04e4c17a17f75ed04..c153f5439649da020ee42c38e88cb8df31a8e307 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -654,6 +654,13 @@ config GPIO_SNPS_CREG
> where only several fields in register belong to GPIO lines and
> each GPIO line owns a field with different length and on/off value.
>
> +config GPIO_SPACEMIT_K1
> + bool "SPACEMIT K1 GPIO support"
> + depends on ARCH_SPACEMIT || COMPILE_TEST
> + select GPIOLIB_IRQCHIP
> + help
> + Say yes here to support the SpacemiT's K1 GPIO device.
> +
> config GPIO_SPEAR_SPICS
> bool "ST SPEAr13xx SPI Chip Select as GPIO support"
> depends on PLAT_SPEAR
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index af3ba4d81b583842893ea69e677fbe2abf31bc7b..6709ce511a0cf10310a94521c85a2d382dcfa696 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -156,6 +156,7 @@ obj-$(CONFIG_GPIO_SIOX) += gpio-siox.o
> obj-$(CONFIG_GPIO_SL28CPLD) += gpio-sl28cpld.o
> obj-$(CONFIG_GPIO_SLOPPY_LOGIC_ANALYZER) += gpio-sloppy-logic-analyzer.o
> obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o
> +obj-$(CONFIG_GPIO_SPACEMIT_K1) += gpio-spacemit-k1.o
> obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o
> obj-$(CONFIG_GPIO_SPRD) += gpio-sprd.o
> obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
> diff --git a/drivers/gpio/gpio-spacemit-k1.c b/drivers/gpio/gpio-spacemit-k1.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..de0491af494c10f528095efee9b3a140bdcc0b0d
> --- /dev/null
> +++ b/drivers/gpio/gpio-spacemit-k1.c
> @@ -0,0 +1,295 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2023-2025 SpacemiT (Hangzhou) Technology Co. Ltd
> + * Copyright (c) 2025 Yixun Lan <dlan@xxxxxxxxxx>
> + */
> +
omit ..
> +static int spacemit_gpio_get_ports(struct device *dev, struct spacemit_gpio *gpio,
> + void __iomem *regs)
> +{
> + struct spacemit_gpio_port *port;
> + u32 i = 0, offset;
> +
> + gpio->nr_ports = device_get_child_node_count(dev);
> + if (gpio->nr_ports == 0)
> + return -ENODEV;
> +
> + gpio->ports = devm_kcalloc(dev, gpio->nr_ports, sizeof(*gpio->ports), GFP_KERNEL);
> + if (!gpio->ports)
> + return -ENOMEM;
> +
> + device_for_each_child_node_scoped(dev, fwnode) {
> + port = &gpio->ports[i];
> + port->fwnode = fwnode;
> + port->index = i++;
> +
> + if (fwnode_property_read_u32(fwnode, "reg", &offset))
> + return -EINVAL;
> +
> + port->base = regs + offset;
> + port->irq = fwnode_irq_get(fwnode, 0);
> + }
> +
> + return 0;
> +}
> +
> +static int spacemit_gpio_add_port(struct spacemit_gpio *gpio, int index)
> +{
> + struct spacemit_gpio_port *port;
> + struct device *dev = gpio->dev;
> + struct gpio_irq_chip *girq;
> + void __iomem *dat, *set, *clr, *dirin, *dirout;
> + int ret;
> +
> + port = &gpio->ports[index];
> + port->gpio = gpio;
> +
> + dat = port->base + GPLR;
> + set = port->base + GPSR;
> + clr = port->base + GPCR;
> + dirin = port->base + GCDR;
> + dirout = port->base + GSDR;
> +
> + /* This registers 32 GPIO lines per port */
> + ret = bgpio_init(&port->gc, dev, 4, dat, set, clr, dirout, dirin,
> + BGPIOF_UNREADABLE_REG_SET | BGPIOF_UNREADABLE_REG_DIR);
Esmil point out bgpio_init() require a GPIO_GENERIC dependency, will fix it
--
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55
