Re: [PATCH v4 01/10] soc: qcom: cpr3: Fix 'acc_desc' usage

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jul 04, 2024 at 10:30:50AM GMT, Varadarajan Narayanan wrote:
> On Wed, Jul 03, 2024 at 01:46:54PM +0300, Dmitry Baryshkov wrote:
> > On Wed, Jul 03, 2024 at 02:46:42PM GMT, Varadarajan Narayanan wrote:
> > > cpr3 code assumes that 'acc_desc' is available for SoCs
> > > implementing CPR version 4 or less. However, IPQ9574 SoC
> > > implements CPRv4 without ACC. This causes NULL pointer accesses
> > > resulting in crashes. Hence, check if 'acc_desc' is populated
> > > before using it.
> > >
> > > Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> > > ---
> > > v4: Undo the acc_desc validation in probe function as that could
> > >     affect other SoC.
> > > ---
> > >  drivers/pmdomain/qcom/cpr3.c | 4 ++--
> > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/pmdomain/qcom/cpr3.c b/drivers/pmdomain/qcom/cpr3.c
> > > index c7790a71e74f..6ceb7605f84d 100644
> > > --- a/drivers/pmdomain/qcom/cpr3.c
> > > +++ b/drivers/pmdomain/qcom/cpr3.c
> > > @@ -2399,12 +2399,12 @@ static int cpr_pd_attach_dev(struct generic_pm_domain *domain,
> > >  		if (ret)
> > >  			goto exit;
> > >
> > > -		if (acc_desc->config)
> > > +		if (acc_desc && acc_desc->config)
> > >  			regmap_multi_reg_write(drv->tcsr, acc_desc->config,
> > >  					       acc_desc->num_regs_per_fuse);
> > >
> > >  		/* Enable ACC if required */
> > > -		if (acc_desc->enable_mask)
> > > +		if (acc_desc && acc_desc->enable_mask)
> > >  			regmap_update_bits(drv->tcsr, acc_desc->enable_reg,
> > >  					   acc_desc->enable_mask,
> > >  					   acc_desc->enable_mask);
> >
> > Should the same fix be applied to other places which access acc_desc?
> > For example cpr_pre_voltage() and cpr_post_voltage() which call
> > cpr_set_acc()?
> 
> With this patch alone, if acc_desc is NULL, cpr_probe() will fail
> at the start itself because of this check
> 
> 	if (!data->acc_desc && desc->cpr_type < CTRL_TYPE_CPRH)
> 		return -EINVAL;
> 
> After applying this patch series, cpr_probe will cross the above
> check to accomodate IPQ9574. However, the check below will ensure
> drv->tcsr is not initialized.
> 
> 	if (desc->cpr_type < CTRL_TYPE_CPRH &&
> 	    !of_device_is_compatible(dev->of_node, "qcom,ipq9574-cpr4"))
> 
> cpr_pre_voltage() and cpr_post_voltage() call cpr_set_acc() only
> if drv->tcsr is not NULL. Hence acc_desc need not be checked.
> 
> Will add the check to cpr_pre_voltage() and cpr_post_voltage() if
> you feel it will make it more robust regardless of the changes to
> cpr_probe in future. Please let me know.

Having !acc_desc check instead of the of_device_is_compatible would
solve the issue.

-- 
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux