cpr3 code assumes that 'acc_desc' is available for SoCs
implementing CPR version 4 or less. However, IPQ9574 SoC
implements CPRv4 without ACC. This causes NULL pointer accesses
resulting in crashes. Hence, check if 'acc_desc' is populated
before using it.
Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
---
v4: Undo the acc_desc validation in probe function as that could
affect other SoC.
---
drivers/pmdomain/qcom/cpr3.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pmdomain/qcom/cpr3.c b/drivers/pmdomain/qcom/cpr3.c
index c7790a71e74f..6ceb7605f84d 100644
--- a/drivers/pmdomain/qcom/cpr3.c
+++ b/drivers/pmdomain/qcom/cpr3.c
@@ -2399,12 +2399,12 @@ static int cpr_pd_attach_dev(struct generic_pm_domain *domain,
if (ret)
goto exit;
- if (acc_desc->config)
+ if (acc_desc && acc_desc->config)
regmap_multi_reg_write(drv->tcsr, acc_desc->config,
acc_desc->num_regs_per_fuse);
/* Enable ACC if required */
- if (acc_desc->enable_mask)
+ if (acc_desc && acc_desc->enable_mask)
regmap_update_bits(drv->tcsr, acc_desc->enable_reg,
acc_desc->enable_mask,
acc_desc->enable_mask);
--
2.34.1
