Re: [PATCH 04/10] dt-bindings: interrupt-controller: Add i.MX8qxp Display Controller interrupt controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/07/2024, Krzysztof Kozlowski wrote:
> On 05/07/2024 11:09, Liu Ying wrote:
>> i.MX8qxp Display Controller has a built-in interrupt controller to support
>> Enable/Status/Preset/Clear interrupt bit.
>>
>> Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
>> ---
>>  .../fsl,imx8qxp-dc-intc.yaml                  | 321 ++++++++++++++++++
>>  1 file changed, 321 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,imx8qxp-dc-intc.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,imx8qxp-dc-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,imx8qxp-dc-intc.yaml
>> new file mode 100644
>> index 000000000000..3d0d11def505
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,imx8qxp-dc-intc.yaml
>> @@ -0,0 +1,321 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/interrupt-controller/fsl,imx8qxp-dc-intc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Freescale i.MX8qxp Display Controller interrupt controller
>> +
>> +description: |
>> +  The Display Controller has a built-in interrupt controller with the following
>> +  features for all relevant HW events:
>> +
>> +  * Enable bit (mask)
>> +  * Status bit (set by an HW event)
>> +  * Preset bit (can be used by SW to set status)
>> +  * Clear bit (used by SW to reset the status)
> 
> 1. Why this is split from the main node?

Maxime suggested to do so:

"
But at least the CRTC and the interrupt controller should be split away,
or explained and detailed far better than "well it's just convenient".
"

https://lore.kernel.org/lkml/2k3cc3yfwqlpquxrdmzmaafz55b3lnqomzxjsvtetfriliqj3k@tv6uh7dzc2ea/

> 
> 2. Who can use this interrupt controller? Children of your display unit?

Yes, only devices in the main display controller use it.

> Then it is not really a separate device, is it?

Er, per Maxime, it is a separate device.

> 
>> +properties:
>> +  compatible:
>> +    const: fsl,imx8qxp-dc-intc
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  interrupt-controller: true
>> +
>> +  "#interrupt-cells":
>> +    const: 1
>> +
>> +  interrupts:
>> +    items:
>> +      - description: |
> 
> Do not need '|' unless you need to preserve formatting.

Will do.

> 
> 
> 
> Best regards,
> Krzysztof
> 

-- 
Regards,
Liu Ying





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux