Linux for MIPS

• Thread Index

• [PATCH 1/2] tx4938ide: Check minimum cycle time and SHWT range
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] CHAR: Delete old and now unused DS1286 driver.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] CHAR: Delete old and now unused M48T35 RTC driver for SGI IP27.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] [MIPS] DS1286: kill BKL
  • From: "Dmitri Vorobiev" <dmitri.vorobiev@xxxxxxxxx>
• Re: [PATCH] [MIPS] DS1286: kill BKL
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] [MIPS] DS1286: kill BKL
  • From: Dmitri Vorobiev <dmitri.vorobiev@xxxxxxxxx>
• Re: [PATCH 00/10] Restructure EMMA2RH port
  • From: Shinya Kuribayashi <shinya.kuribayashi@xxxxxxxxx>
• Re: [PATCH 00/10] Restructure EMMA2RH port
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] disable the right device
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] irq handler must disable the handled irq
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] irq handler must disable the handled irq
  • From: Phil Sutter <n0-1@xxxxxxxxxxx>
• [PATCH] disable the right device
  • From: Phil Sutter <n0-1@xxxxxxxxxxx>
• Re: [PATCH 35/37] Set c0 status for ST0_KX on Cavium OCTEON.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 35/37] Set c0 status for ST0_KX on Cavium OCTEON.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 35/37] Set c0 status for ST0_KX on Cavium OCTEON.
  • From: Chad Reese <kreese@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 35/37] Set c0 status for ST0_KX on Cavium OCTEON.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH/RFC v1 00/12] Support for Broadcom 63xx SOCs
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH/RFC v1 00/12] Support for Broadcom 63xx SOCs
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH/RFC v1 00/12] Support for Broadcom 63xx SOCs
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] rb532: gpio register offsets are relatives to GPIOBASE
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH] txx9: CONFIG_TOSHIBA_RBTX4939 spelling
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][MIPS] fix kgdb build error
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] [MIPS] sgi_btns: add license specification
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] [MIPS] IP22: Small cleanups
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH][MIPS] fix kgdb build error
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• Re: [PATCH] defined a macro for lemote 2e box IO base
  • From: Zhang Le <r0bertz@xxxxxxxxxx>
• [PATCH] [MIPS] sgi_btns: add license specification
  • From: Dmitri Vorobiev <dmitri.vorobiev@xxxxxxxxx>
• [PATCH] [MIPS] IP22: Small cleanups
  • From: Dmitri Vorobiev <dmitri.vorobiev@xxxxxxxxx>
• Re: Question about rdhwr emulation.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: Question about rdhwr emulation.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] RBTX4939: Add smc91x support
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Alchemy: wire up SD controller on DB/PB1200 boards.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] TXx9: Add TX4938 ATA support (v2)
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] TXx9: Add TX4938 ATA support (v2)
  • From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
• Re: [PATCH] defined a macro for lemote 2e box IO base
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] defined a macro for lemote 2e box IO base
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 29/37] Don't clobber spinlocks in 8250.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 11/37] Cavium OCTEON: ebase isn't just CAC_BASE
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 29/37] Don't clobber spinlocks in 8250.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 11/37] Cavium OCTEON: ebase isn't just CAC_BASE
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• [PATCH] rb532: set gpio interrupt status and level for CompactFlash
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH][MIPS] fix kgdb build error
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH][MIPS] fix rb532 build error
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [2.6 patch] mips/pci/fixup-rc32434.c must #include <asm/mach-rc32434/irq.h>
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][MIPS] fix kgdb build error
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 28/37] Cavium OCTEON FPU EMU exception as TLB exception
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH][MIPS] fix kgdb build error
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][MIPS] fix kgdb build error
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Set ENOSYS to errno on illegal system call number for syscall(2)
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Set positive error number to errno on illegal_syscall
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] Set ENOSYS to errno on illegal system call number for syscall(2)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] Set positive error number to errno on illegal_syscall
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4938ide driver (v2)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 36/37] Cavium OCTEON: pmd_none - use pmd_val() in pmd_val().
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4938ide driver (v2)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH][MIPS] fix rb532 build error
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH][MIPS] fix rb532 build error
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• [PATCH][MIPS] fix kgdb build error
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• Re: [PATCH 36/37] Cavium OCTEON: pmd_none - use pmd_val() in pmd_val().
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH][MIPS] Cobalt: add select PCI
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• Re: RBTX4927 with VxWorks boot loader crashes in prom_getenv()
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4938ide driver (v2)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: RBTX4927 with VxWorks boot loader crashes in prom_getenv()
  • From: Geert Uytterhoeven <Geert.Uytterhoeven@xxxxxxxxxxx>
• Re: RBTX4927 with VxWorks boot loader crashes in prom_getenv()
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 28/37] Cavium OCTEON FPU EMU exception as TLB exception
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [PATCH 36/37] Cavium OCTEON: pmd_none - use pmd_val() in pmd_val().
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: RBTX4927 with VxWorks boot loader crashes in prom_getenv()
  • From: Geert Uytterhoeven <Geert.Uytterhoeven@xxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4938ide driver (v2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 08/37] For Cavium OCTEON handle hazzards as per the R10000 handling.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 28/37] Cavium OCTEON FPU EMU exception as TLB exception
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• RBTX4927 with VxWorks boot loader crashes in prom_getenv()
  • From: Geert Uytterhoeven <Geert.Uytterhoeven@xxxxxxxxxxx>
• Re: [PATCH] defined a macro for lemote 2e box IO base
  • From: Zhang Le <r0bertz@xxxxxxxxxx>
• [PATCH 37/37] Add defconfig for Cavium OCTEON.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 34/37] Adjust the dma-common.c platform hooks.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 31/37] Allow port type to be specified when calling serial8250_register_port.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 22/37] Add Cavium OCTEON specific registers to ptrace.h and asm-offsets.c
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 36/37] Cavium OCTEON: pmd_none - use pmd_val() in pmd_val().
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 24/37] Cavium OCTEON: PT vs MFC0 reorder, multiplier state preservation.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 35/37] Set c0 status for ST0_KX on Cavium OCTEON.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 06/37] Add Cavium OCTEON processor CSR definitions
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 28/37] Cavium OCTEON FPU EMU exception as TLB exception
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 30/37] Generic 8250 serial driver changes to support future OCTEON serial patches.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 26/37] Compute branch returns for Cavium OCTEON specific branch instructions.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 25/37] Add Cavium OCTEON irq hazard in asmmacro.h.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 32/37] Allow port type to specify bugs that are not probed for.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 29/37] Don't clobber spinlocks in 8250.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 33/37] 8250 serial driver changes for Cavium OCTEON.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 21/37] Cavium OCTEON: Add cop2/cvmseg state entries to processor.h.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 27/37] Add Cavium OCTEON slot into proper tlb category.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 20/37] Cavium OCTEON: add in icache and dcache error functions.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 18/37] Cavium OCTEON modify core io.h macros to account for the Octeon Errata Core-301.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 17/37] cavium: Hook Cavium specifics into main arch/mips dir
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 23/37] Add SMP_ICACHE_FLUSH for the Cavium CPU family.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 16/37] MIPS: Hook Cavium OCTEON cache init into cache.c
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 19/37] Cavium OCTEON: increase MAX_DMA address.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 14/37] Rewrite cpu_to_name so it has one statement per line.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 15/37] Probe for Cavium OCTEON CPUs.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 12/37] Add Cavium OCTEON to arch/mips/Kconfig
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 13/37] Add Cavium OCTEON processor constants.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 11/37] Cavium OCTEON: ebase isn't just CAC_BASE
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 10/37] Cavium OCTEON: Set hwrena and lazily restore CP2 state.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 09/37] Enable mips32 style bitops for Cavium OCTEON.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 07/37] Don't assume boot CPU is CPU0 if MIPS_DISABLE_BOOT_CPU_ZERO set.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 08/37] For Cavium OCTEON handle hazzards as per the R10000 handling.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 05/37] Add Cavium OCTEON processor support files to and arch/mips/cavium-octeon/executive
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 03/37] Add Cavium OCTEON processor support files to arch/mips/kernel.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 04/37] Add Cavium OCTEON processor support files to arch/mips/mm.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 01/37] Add Cavium OCTEON processor support files to arch/mips/cavium-octeon.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 00/37] Add Cavium OCTEON processor support.
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• [PATCH 02/37] Add Cavium OCTEON files to arch/mips/include/asm/mach-cavium-octeon
  • From: ddaney@xxxxxxxxxxxxxxxxxx
• Re: [PATCH] TXx9: Add TX4938 ATA support (v2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4939ide driver (v5)
  • From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
• Re: [PATCH] ide: Add tx4939ide driver (v6)
  • From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
• Re: [PATCH] ide: Add tx4938ide driver (v2)
  • From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
• Re: [PATCH] TXx9: Add TX4938 ATA support (v2)
  • From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
• [PATCH 02/12] MIPS: EMMA Kconfig reorganization
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4938ide driver (v2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 08/12] MIPS: EMMA2RH: Remove emma2rh_gpio_irq_base
  • From: Markus Gothe <markus.gothe@xxxxxx>
• Re: [PATCH] TXx9: Add TX4938 ATA support (v2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH 12/12] MIPS: Markeins: Remove unnecessary define and cleanup comments, etc.
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>
• [PATCH 11/12] MIPS: Markeins: Extract ll_emma2rh_* functions
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>
• [PATCH 10/12] MIPS: Markeins: Remove runtime debug prints
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>
• [PATCH 09/12] MIPS: Fold arch/mips/emma/{common,markeins}/irq*.c into markeins/irq.c
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>
• [PATCH 08/12] MIPS: EMMA2RH: Remove emma2rh_gpio_irq_base
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>
• [PATCH 07/12] MIPS: EMMA2RH: Remove emma2rh_sw_irq_base
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>
• [PATCH 06/12] MIPS: EMMA2RH: Remove emma2rh_irq_base global variable
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>
• [PATCH 05/12] MIPS: Remove emma2rh_sync on read operation
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>
• [PATCH 04/12] MIPS: Move <asm/emma2rh> to <asm/emma> dir
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>
• [PATCH 03/12] MIPS: Move arch/mips/emma2rh/ into arch/mips/emma/
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>
• [PATCH 01/12] MIPS: Add CONFIG_CPU_R5500 for NEC VR5500 series processors
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>
• [PATCH 00/10] Restructure EMMA2RH port
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>
• [PATCH 2/2] added io_map_base to pci_controller on Lemote Loongson 2E box
  • From: Zhang Le <r0bertz@xxxxxxxxxx>
• [PATCH 1/2] defined LEMOTE_IO_PORT_BASE for Lemote Loonson 2E box's IO base
  • From: Zhang Le <r0bertz@xxxxxxxxxx>
• Re: AR7 MIPS development tools
  • From: Markus Gothe <markus.gothe@xxxxxx>
• Re: [PATCH] txx9: CONFIG_TOSHIBA_RBTX4939 spelling
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] txx9: CONFIG_TOSHIBA_RBTX4939 spelling
  • From: Geert Uytterhoeven <Geert.Uytterhoeven@xxxxxxxxxxx>
• Re: [PATCH] TXx9: Add TX4938 ATA support (v2)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] TXx9: Add TX4938 ATA support (v2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: panic logic defeats arch dependent code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Support for ftrace in MIPS
  • From: "Frédéric Weisbecker" <fweisbec@xxxxxxxxx>
• Re: Support for ftrace in MIPS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• AR7 MIPS development tools
  • From: "Arao H. Filho" <eletronicaecia@xxxxxxxxx>
• Re: [PATCH] defined a macro for lemote 2e box IO base
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] defined a macro for lemote 2e box IO base
  • From: Thiemo Seufer <ths@xxxxxxxxxxxx>
• Re: [PATCH] added io_map_base to pci_controller on Lemote 2e box
  • From: Zhang Le <r0bertz@xxxxxxxxxx>
• [PATCH] defined a macro for lemote 2e box IO base
  • From: Zhang Le <r0bertz@xxxxxxxxxx>
• [PATCH] added io_map_base to pci_controller on Lemote 2e box
  • From: Zhang Le <r0bertz@xxxxxxxxxx>
• [PATCH] ide: Add tx4938ide driver (v2)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] TXx9: Add TX4938 ATA support (v2)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] ide: Add tx4939ide driver (v6)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4939ide driver (v5)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH/RFC v1 00/12] Support for Broadcom 63xx SOCs
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [rtc-linux] [RFC PATCH] Au1xxx on-chip counter-as-RTC driver
  • From: Manuel Lauss <mano@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: Question about rdhwr emulation.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Question about rdhwr emulation.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [rtc-linux] [RFC PATCH] Au1xxx on-chip counter-as-RTC driver
  • From: Alessandro Zummo <alessandro.zummo@xxxxxxxxxxxx>
• Re: [PATCH/RFC v1 10/12] [MIPS] BCM63XX: Add integrated ethernet PHY support for phylib.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• Re: [PATCH/RFC v1 10/12] [MIPS] BCM63XX: Add integrated ethernet PHY support for phylib.
  • From: Andy Fleming <afleming@xxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4939ide driver (v5)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] serial: Initialize spinlocks in 8250 and don't clobber them.
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] serial: Initialize spinlocks in 8250 and don't clobber them.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] serial: Initialize spinlocks in 8250 and don't clobber them.
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• [PATCH] Alchemy: wire up SD controller on DB/PB1200 boards.
  • From: Manuel Lauss <mano@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] net: Make SMC91X selectable on other MIPS boards
  • From: Jeff Garzik <jeff@xxxxxxxxxx>
• Support for ftrace in MIPS
  • From: "Frédéric Weisbecker" <fweisbec@xxxxxxxxx>
• Re: [PATCH] serial: Initialize spinlocks in 8250 and don't clobber them.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] serial: Initialize spinlocks in 8250 and don't clobber them.
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• RE: panic logic defeats arch dependent code
  • From: "Anirban Sinha" <ASinha@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4938ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] TXx9: Add TX4938 ATA support
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] RBTX4939: Add smc91x support
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] net: Make SMC91X selectable on other MIPS boards
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] TXx9: Add TX4938 ATA support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH] TXx9: 7 segment LED support
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4938ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] TXx9: Add TX4938 ATA support
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] ide: Add tx4939ide driver (v5)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4939ide driver (v4)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] TXx9: Add TX4938 ATA support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4938ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4939ide driver (v4)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH/RFC v1 09/12] [MIPS] BCM63XX: Add integrated ethernet mac support.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH/RFC v1 12/12] [MIPS] BCM63XX: Add defconfig.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH/RFC v1 10/12] [MIPS] BCM63XX: Add integrated ethernet PHY support for phylib.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH/RFC v1 11/12] [MIPS] BCM63XX: Add preliminary board support.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH/RFC v1 07/12] [MIPS] BCM63XX: Add USB OHCI support.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH/RFC v1 08/12] [MIPS] BCM63XX: Add USB EHCI support.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH/RFC v1 06/12] [MIPS] BCM63XX: Add PCMCIA & Cardbus support.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH/RFC v1 05/12] [MIPS] BCM63XX: Change PCI code to emulate a fake cardbus bridge.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH/RFC v1 02/12] [MIPS] BCM63XX: Add support for Broadcom 63xx CPUs.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH/RFC v1 03/12] [MIPS] BCM63XX: Add serial driver for bcm63xx integrated UART.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH/RFC v1 04/12] [MIPS] BCM63XX: Add PCI support.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH/RFC v1 00/12] Support for Broadcom 63xx SOCs
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH/RFC v1 01/12] [MIPS] BCM63XX: Add Broadcom 63xx CPU definitions.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• Re: stop_this_cpu - redundant code?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4939ide driver (v4)
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Don't unmap the memory for dma_sync*.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• stop_this_cpu - redundant code?
  • From: "Anirban Sinha" <ASinha@xxxxxxxxxxxxxxxxx>
• [PATCH] Don't unmap the memory for dma_sync*.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• MIPS: Add CONFIG_CPU_R5500 for NEC VR5500 series processors
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4939ide driver (v4)
  • From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
• Re: [PATCH] Fix debugfs_create_*'s error checking method for mips/kernel/
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Fix debugfs_create_*'s error checking method for mips/math-emu/
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Fix debugfs_create_*'s error checking method for mips/math-emu/
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4939ide driver (v4)
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Fix debugfs_create_*'s error checking method for mips/kernel/
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4939ide driver (v4)
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] ide: Add tx4938ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] TXx9: Add TX4938 ATA support
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] ide: Add tx4939ide driver (v4)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] Fix debugfs_create_*'s error checking method for mips/kernel/
  • From: Zhaolei <zhaolei@xxxxxxxxxxxxxx>
• [PATCH] Fix debugfs_create_*'s error checking method for mips/math-emu/
  • From: Zhaolei <zhaolei@xxxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4939ide driver (v3)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4939ide driver (v3)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4939ide driver (v3)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] ide: Add tx4939ide driver (v3)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH] MIPS: Rewrite cpu_to_name so it has one statement per line (version 3).
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Fix include paths in malta-amon.c
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] 8250: Don't clobber spinlocks in 8250.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Rewrite cpu_to_name so it has one statement per line (version 2).
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Rewrite cpu_to_name so it has one statement per line (version 2).
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• Re: [PATCH] MIPS: Rewrite cpu_to_name so it has one statement per line (version 2).
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• [PATCH] MIPS: Rewrite cpu_to_name so it has one statement per line (version 2).
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] serial: Initialize spinlocks in 8250 and don't clobber them.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Rewrite cpu_to_name so it has one statement per line.
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• Re: [PATCH][MIPS] Kill unused <asm/debug.h> inclusions
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] IP32: add platform device for cmos rtc; remove dead code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v4] M48T35: new RTC driver
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v4] IP27: Switch over to RTC class driver
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v3] DS1286: new RTC driver
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v3] IP22/28: Switch over to RTC class driver
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] BCM47xx patches for 2.6.28
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Align .data.cacheline_aligned based on MIPS_L1_CACHE_SHIFT
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Align .data.cacheline_aligned based on MIPS_L1_CACHE_SHIFT
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Rewrite cpu_to_name so it has one statement per line.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH v4] IP27: Switch over to RTC class driver
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH v3] DS1286: new RTC driver
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH v3] IP22/28: Switch over to RTC class driver
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• [PATCH v4] M48T35: new RTC driver
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [Fwd: [bug report] 0xffffffffc0000000 can't be used on bcm1250]
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [Fwd: [bug report] 0xffffffffc0000000 can't be used on bcm1250]
  • From: Weiwei Wang <weiwei.wang@xxxxxxxxxxxxx>
• [PATCH 5/5] [MIPS] Scan PCI busses when they are registered
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• [PATCH 4/5] [MIPS] Add WGT634U reset button support
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• [PATCH 3/5] [MIPS] BCM47xx: Use the new SSB GPIO API
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• [PATCH 2/5] [MIPS] Remove references to BCM947XX
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• [PATCH 1/5] [MIPS] WGT634U: Add machine detection message
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• [PATCH 0/5] BCM47xx patches for 2.6.28
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• Re: [PATCH] MIPS: Align .data.cacheline_aligned based on MIPS_L1_CACHE_SHIFT
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Rewrite cpu_to_name so it has one statement per line.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] show_cpuinfo prints the name of the calling CPU, which i think is wrong.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [Fwd: [bug report] 0xffffffffc0000000 can't be used on bcm1250]
  • From: Weiwei Wang <weiwei.wang@xxxxxxxxxxxxx>
• [PATCH] MIPS: Align .data.cacheline_aligned based on MIPS_L1_CACHE_SHIFT
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] show_cpuinfo prints the name of the calling CPU, which i think is wrong.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] show_cpuinfo prints the name of the calling CPU, which i think is wrong.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Questions for CONFIG_WEAK_ORDERING and CONFIG_WEAK_REORDERING_BEYOND_LLSC
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Questions for CONFIG_WEAK_ORDERING and CONFIG_WEAK_REORDERING_BEYOND_LLSC
  • From: Johannes Dickgreber <tanzy@xxxxxx>
• Re: [Fwd: [bug report] 0xffffffffc0000000 can't be used on bcm1250]
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• [PATCH] MIPS: Rewrite cpu_to_name so it has one statement per line.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] show_cpuinfo prints the name of the calling CPU, which i think is wrong.
  • From: Johannes Dickgreber <tanzy@xxxxxx>
• Re: [Fwd: [bug report] 0xffffffffc0000000 can't be used on bcm1250]
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [2.6 patch] net/au1000_eth.c MDIO namespace fixes
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [2.6 patch] net/tc35815.c: fix compilation
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH][MIPS] Kill unused <asm/debug.h> inclusions
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>
• [2.6 patch] mips/pci/fixup-rc32434.c must #include <asm/mach-rc32434/irq.h>
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• Re: [PATCH] Fix include paths in malta-amon.c
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• [2.6 patch] net/tc35815.c: fix compilation
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• [2.6 patch] net/au1000_eth.c MDIO namespace fixes
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• mips ip27_defconfig defconfig build error
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• One file still left in include/asm-mips
  • From: "Shane McDonald" <mcdonald.shane@xxxxxxxxx>
• Re: [PATCH] MIPS: Report all watch register masks in /proc/cpuinfo (version 2).
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Use __cpuinit for mips_probe_watch_registers.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Add missing include in arch/mips/include/asm/ptrace.h.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Add missing include in arch/mips/include/asm/ptrace.h.
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] MIPS: Add missing include in arch/mips/include/asm/ptrace.h.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] MIPS: Report all watch register masks in /proc/cpuinfo (version 2).
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Report all watch register masks in /proc/cpuinfo.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] MIPS: Report all watch register masks in /proc/cpuinfo.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] MIPS: Use __cpuinit for mips_probe_watch_registers.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• error: inactive address
  • From: info@xxxxxxxxxxxxxxxx
• Re: [PATCH] ide: Add tx4939ide driver (v3)
  • From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
• Re: Huge buffer allocation: best place
  • From: C Michael Sundius <Michael.sundius@xxxxxxxxxx>
• Re: [PATCH 1/4] serial: 8250 driver replaceable i/o functions.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] serial: 8250 driver replaceable i/o functions.
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• [PATCH 4/4] serial: Add new uart_config for PORT_OCTEON
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/4] serial: Allow port type to specify bugs that are not probed for.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/4] serial: Allow port type to be specified when calling serial8250_register_port.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] serial: 8250 driver replaceable i/o functions.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/4] serial: 8250 driver improvements & Cavium OCTEON serial support
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: 2 Au1xxx (Alchemy) AC97 drivers
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: 2 Au1xxx (Alchemy) AC97 drivers
  • From: Manuel Lauss <mano@xxxxxxxxxxxxxxxxxxxxxxx>
• 2 Au1xxx (Alchemy) AC97 drivers
  • From: Kevin Hickey <khickey@xxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Jens Axboe <jens.axboe@xxxxxxxxxx>
• Reg: Microwindow on Mips.
  • From: "V!j@y Chandran" <vijayachandran.m@xxxxxxxxx>
• Re: [PATCH] serial: Add Cavium OCTEON UART definitions.
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] serial: Add Cavium OCTEON UART definitions.
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] serial: Add Cavium OCTEON UART definitions.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: Have ever checked in your mips sparsemem code into mips-linux tree?
  • From: John <me94043@xxxxxxxxx>
• Re: [PATCH 2/2] serial: Move UPIO_TSI register access to processor specific file.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: Have ever checked in your mips sparsemem code into mips-linux tree?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 1/2] serial: Allow for replacable I/O functions in 8250 driver.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: Have ever checked in your mips sparsemem code into mips-linux tree?
  • From: C Michael Sundius <Michael.sundius@xxxxxxxxxx>
• Re: Have ever checked in your mips sparsemem code into mips-linux tree?
  • From: C Michael Sundius <Michael.sundius@xxxxxxxxxx>
• Re: mips : how to make java binary to run on the board
  • From: "Ilya A. Volynets-Evenbakh" <ilya@xxxxxxxxxxxxxxxxxxx>
• mips : how to make java binary to run on the board
  • From: Abhiruchi Gupta <abhiruchi.g@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Tejun Heo <htejun@xxxxxxxxx>
• Re: [PATCH v2] IDE: Fix platform device registration in Swarm IDE driver
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2] IDE: Fix platform device registration in Swarm IDE driver
  • From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
• Bogus code in linux-queue commit 381ef5828990102b098aeb0a1f6958efd2e99733
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: SMTC Patches [0 of 3]
  • From: "Kevin D. Kissell" <kevink@xxxxxxxxxxxxx>
• [PATCH] ide: Add tx4939ide driver (v3)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: SMTC Patches [0 of 3]
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: page_write_back infinite wait (porting to Mips 4kec SoC)
  • From: "Luigi 'Comio' Mantellini" <luigi.mantellini.ml@xxxxxxxxx>
• Huge buffer allocation: best place
  • From: "Luigi 'Comio' Mantellini" <luigi.mantellini.ml@xxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS checksum fix
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH v2] IDE: Fix platform device registration in Swarm IDE driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH v2] IDE: Fix platform device registration in Swarm IDE driver
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2] IDE: Fix platform device registration in Swarm IDE driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH v2] IDE: Fix platform device registration in Swarm IDE driver
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] IDE: Fix platform device registration in Swarm IDE driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] IDE: Fix platform device registration in Swarm IDE driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] IDE: Fix platform device registration in Swarm IDE driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] IDE: Fix platform device registration in Swarm IDE driver
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] IDE: Fix platform device registration in Swarm IDE driver
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] IDE: Fix platform device registration in Swarm IDE driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] IDE: Fix platform device registration in Swarm IDE driver
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Tejun Heo <htejun@xxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
• Re: [PATCH] Swarm: Fix crash due to missing initialization
  • From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
• Re: [PATCH] IDE: Fix platform device registration in Swarm IDE driver
  • From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
• Re: [PATCH 1/6 v3] [MIPS] BCM47xx: Add platform specific PCI code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 1/6 v3] [MIPS] BCM47xx: Add platform specific PCI code
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• [PATCH 1/6 v2] [MIPS] BCM47xx: Add platform specific PCI code
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• Re: [PATCH 1/6] [MIPS] BCM47xx: Add platform specific PCI code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] convert sbmac tx to spin_lock_irqsave to prevent early IRQ enable
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] [MIPS] BCM47xx: Add platform specific PCI code
  • From: Michael Buesch <mb@xxxxxxxxx>
• Re: [PATCH 1/6] [MIPS] BCM47xx: Add platform specific PCI code
  • From: Michael Buesch <mb@xxxxxxxxx>
• Re: [PATCH] convert sbmac tx to spin_lock_irqsave to prevent early IRQ enable
  • From: Jeff Garzik <jeff@xxxxxxxxxx>
• Re: [PATCH 1/6] [MIPS] BCM47xx: Add platform specific PCI code
  • From: "John W. Linville" <linville@xxxxxxxxxxxxx>
• Re: [PATCH 1/6] [MIPS] BCM47xx: Add platform specific PCI code
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 1/6] [MIPS] BCM47xx: Add platform specific PCI code
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• Re: mmap is broken for MIPS64 n32 and o32 abis
  • From: "Dinar Temirbulatov" <dtemirbulatov@xxxxxxxxx>
• Re: [PATCH 1/6] [MIPS] BCM47xx: Add platform specific PCI code
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/6] [MIPS] BCM47xx: Add platform specific PCI code
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/6] [MIPS] BCM47xx: Add platform specific PCI code
  • From: Michael Buesch <mb@xxxxxxxxx>
• [PATCH 1/6] [MIPS] BCM47xx: Add platform specific PCI code
  • From: "John W. Linville" <linville@xxxxxxxxxxxxx>
• Re: [PATCH 1/6] [MIPS] BCM47xx: Add platform specific PCI code
  • From: "John W. Linville" <linville@xxxxxxxxxxxxx>
• Re: [PATCH 1/6] [MIPS] BCM47xx: Add platform specific PCI code
  • From: Michael Buesch <mb@xxxxxxxxx>
• Re: [PATCH 1/6] [MIPS] BCM47xx: Add platform specific PCI code
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH 3/6] [MIPS] Remove references to BCM947XX
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• [PATCH 4/6] [MIPS] BCM47xx: Use the new SSB GPIO API
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• [PATCH 6/6] [MIPS] Scan PCI busses when they are registered
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH 1/6] [MIPS] BCM47xx: Add platform specific PCI code
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• [PATCH 0/6] BCM47xx patches
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• [PATCH 5/6] [MIPS] Add WGT634U reset button support
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• [PATCH 2/6] [MIPS] WGT634U: Add machine detection message
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• Re: [PATCH] IDE: Fix platform device registration in Swarm IDE driver
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] IDE: Fix platform device registration in Swarm IDE driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS checksum fix
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS checksum fix
  • From: Bryan Phillippe <u1@xxxxxxxxxx>
• Re: [PATCH] au1000: fix gpio direction
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Patch 0/6] MIPS: Hardware watch register support for gdb (version 5).
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• Re: Patch 0/6] MIPS: Hardware watch register support for gdb (version 5).
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] au1000: fix gpio direction
  • From: Bruno Randolf <br1@xxxxxxxxxxx>
• [PATCH] Fixed the definition of PTRS_PER_PGD
  • From: jack.tan@xxxxxxxxxxxxx
• Re: mmap is broken for MIPS64 n32 and o32 abis
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• page_write_back infinite wait (porting to Mips 4kec SoC)
  • From: "Luigi 'Comio' Mantellini" <luigi.mantellini.ml@xxxxxxxxx>
• [Patch 3/6] MIPS: Probe watch registers and report configuration.
  • From: David Daney <ddaney@xxxxxxxxxx>
• [Patch 2/6] MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.
  • From: David Daney <ddaney@xxxxxxxxxx>
• [Patch 6/6] MIPS: Ptrace support for HARDWARE_WATCHPOINTS
  • From: David Daney <ddaney@xxxxxxxxxx>
• [Patch 1/6] MIPS: Add HARDWARE_WATCHPOINTS configure option.
  • From: David Daney <ddaney@xxxxxxxxxx>
• Patch 0/6] MIPS: Hardware watch register support for gdb (version 5).
  • From: David Daney <ddaney@xxxxxxxxxx>
• [Patch 4/6] MIPS: Watch exception handling for HARDWARE_WATCHPOINTS.
  • From: David Daney <ddaney@xxxxxxxxxx>
• [Patch 5/6] MIPS: Scheduler support for HARDWARE_WATCHPOINTS.
  • From: David Daney <ddaney@xxxxxxxxxx>
• [PATCH] IP32: add platform device for cmos rtc; remove dead code
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] TXx9: Add TX4939 ATA support (v2)
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] TXx9: Add TX4939 ATA support (v2)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] TXx9: Add TX4939 ATA support (v2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] TXx9: Add TX4939 ATA support (v2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] TXx9: Add TX4939 ATA support (v2)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] IDE: Fix platform device registration in Swarm IDE driver
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] Swarm: Fix crash due to missing initialization
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: mmap is broken for MIPS64 n32 and o32 abis
  • From: "Dinar Temirbulatov" <dtemirbulatov@xxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] convert sbmac tx to spin_lock_irqsave to prevent early IRQ enable
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH] Fix include paths in malta-amon.c
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: [PATCH] MIPS checksum fix
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: MIPS checksum bug
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] TXx9: Add TX4939 ATA support (v2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• SMP8634 DRAM memory issue
  • From: <linux-mips@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: SMP8634 DRAM memory issue
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: Move headfiles to new location below arch/mips/include
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Move headfiles to new location below arch/mips/include
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: MIPS checksum bug
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: MIPS checksum bug
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: mmap is broken for MIPS64 n32 and o32 abis
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
• Re: mmap is broken for MIPS64 n32 and o32 abis
  • From: "Dinar Temirbulatov" <dtemirbulatov@xxxxxxxxx>
• Re: MIPS checksum bug
  • From: Thiemo Seufer <ths@xxxxxxxxxxxx>
• Re: MIPS checksum bug
  • From: Bryan Phillippe <u1@xxxxxxxxxx>
• Re: MIPS checksum bug
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: MIPS checksum bug
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS checksum fix
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS checksum fix
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• AW: Same mipsel binary für 2.4 and 2.6 kernel possible?
  • From: Klatt Uwe <U.Klatt@xxxxxxx>
• Re: Same mipsel binary für 2.4 and 2.6 kernel possible?
  • From: "Kevin D. Kissell" <kevink@xxxxxxxxxxxxx>
• Re: mmap is broken for MIPS64 n32 and o32 abis
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: MIPS checksum bug
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS checksum fix
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS checksum fix
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• [PATCH] MIPS checksum fix
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: MIPS checksum bug
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• AW: Same mipsel binary für 2.4 and 2.6 kernel possible?
  • From: Klatt Uwe <U.Klatt@xxxxxxx>
• AW: Same mipsel binary für 2.4 and 2.6 kernel possible?
  • From: Klatt Uwe <U.Klatt@xxxxxxx>
• Re: Same mipsel binary für 2.4 and 2.6 kernel possible?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: mmap is broken for MIPS64 n32 and o32 abis
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: MIPS checksum bug
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [SPAM] Same mipsel binary für 2.4 and 2.6 kernel possible?
  • From: Markus Gothe <markus.gothe@xxxxxx>
• Re: execve errno setting on MIPS
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Same mipsel binary für 2.4 and 2.6 kernel possible?
  • From: Klatt Uwe <U.Klatt@xxxxxxx>
• mmap is broken for MIPS64 n32 and o32 abis
  • From: "Dinar Temirbulatov" <dtemirbulatov@xxxxxxxxx>
• Re: execve errno setting on MIPS
  • From: "Sadashiiv, Halesh" <halesh.sadashiv@xxxxxxxxxxx>
• Re: execve errno setting on MIPS
  • From: "Sadashiiv, Halesh" <halesh.sadashiv@xxxxxxxxxxx>
• Re: MIPS checksum bug
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
• Re: MIPS checksum bug
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: execve errno setting on MIPS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: execve errno setting on MIPS
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: MIPS checksum bug
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] gpio_free might sleep, mips architecture
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• execve errno setting on MIPS
  • From: "Sadashiiv, Halesh" <halesh.sadashiv@xxxxxxxxxxx>
• Re: MIPS checksum bug
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH] gpio_free might sleep, mips architecture
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: MIPS checksum bug
  • From: Bryan Phillippe <u1@xxxxxxxxxx>
• Re: MIPS checksum bug
  • From: Bryan Phillippe <u1@xxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Jeff Garzik <jeff@xxxxxxxxxx>
• Re: [PATCH] gpio_free might sleep, mips architecture
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: MIPS checksum bug
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: MIPS checksum bug
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH 2/2] TXx9: Add TX4939 ATA support (v2)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH 1/2] ide: Add tx4939ide driver (v2)
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: MIPS checksum bug
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: MIPS checksum bug
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] convert sbmac tx to spin_lock_irqsave to prevent early IRQ enable
  • From: Jeff Garzik <jgarzik@xxxxxxxxxx>
• Re: MIPS checksum bug
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• MIPS checksum bug
  • From: Bryan Phillippe <u1@xxxxxxxxxx>
• [PATCH] convert sbmac tx to spin_lock_irqsave to prevent early IRQ enable
  • From: Weiwei Wang <weiwei.wang@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] [MIPS] vr41xx: unsigned irq cannot be negative
  • From: roel kluin <roel.kluin@xxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] [MIPS] vr41xx: unsigned irq cannot be negative
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] [MIPS] vr41xx: unsigned irq cannot be negative
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Au1200 USB Device Controller and device-only OTG
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] [MIPS] vr41xx: unsigned irq cannot be negative
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• [PATCH] gpio_free might sleep, mips architecture
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] [MIPS] vr41xx: unsigned irq cannot be negative
  • From: roel kluin <roel.kluin@xxxxxxxxx>
• Re: [PATCH] Au1200 USB Device Controller and device-only OTG
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] Au1200 USB Device Controller and device-only OTG
  • From: "Kevin Hickey" <khickey@xxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 0/3] Globally defining phys_addr_t
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] sparse: Make pre_buffer dynamically increasable
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] sparse: Make pre_buffer dynamically increasable
  • From: "Christopher Li" <sparse@xxxxxxxxxxx>
• Re: [PATCH] sparse: Make pre_buffer dynamically increasable
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] exclude h8300 local symbols (Re: kallsyms exclude local symbols)
  • From: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH] Au1200 USB Device Controller and device-only OTG
  • From: Kevin Hickey <khickey@xxxxxxxxxxx>
• Re: [PATCH 0/3] Globally defining phys_addr_t
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH] rb532: do not use phys_t
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] Globally defining phys_addr_t
  • From: Jeremy Fitzhardinge <jeremy@xxxxxxxx>
• [PATCH] rb532: provide GPIO_BUILTIN_NR and irq_to_gpio/gpio_to_irq
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH] rb532: do not use phys_t
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [Patch 2/6] MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: 2.6.27-rc5-mm1
  • From: "Kevin D. Kissell" <kevink@xxxxxxxxxxxxx>
• SMTC Patches [4 of 3]
  • From: "Kevin D. Kissell" <kevink@xxxxxxxxxxxxx>
• Re: SMTC Patches [0 of 3] (how about 4)
  • From: "Kevin D. Kissell" <kevink@xxxxxxxxxxxxx>
• Re: [PATCH 0/3] Globally defining phys_addr_t
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] TXx9: Add TX4939 ATA support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: 2.6.27-rc5-mm1
  • From: Dmitri Vorobiev <dmitri.vorobiev@xxxxxxxxx>
• Re: [Patch 2/6] MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [Patch 5/6] MIPS: Scheduler support for HARDWARE_WATCHPOINTS.
  • From: David Daney <ddaney@xxxxxxxxxx>
• [Patch 0/6] MIPS: Hardware watch register support for gdb (version 4).
  • From: David Daney <ddaney@xxxxxxxxxx>
• [Patch 2/6] MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.
  • From: David Daney <ddaney@xxxxxxxxxx>
• [Patch 3/6] MIPS: Probe watch registers and report configuration.
  • From: David Daney <ddaney@xxxxxxxxxx>
• [Patch 1/6] MIPS: Add HARDWARE_WATCHPOINTS configure option.
  • From: David Daney <ddaney@xxxxxxxxxx>
• [Patch 4/6] MIPS: Watch exception handling for HARDWARE_WATCHPOINTS.
  • From: David Daney <ddaney@xxxxxxxxxx>
• [Patch 6/6] MIPS: Ptrace support for HARDWARE_WATCHPOINTS
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] mips: clear IV bit in CP0 cause if the CPU doesn't support divec
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Help on MTD Partitions.
  • From: "Ramgopal Kota" <rkota@xxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] TXx9: Fix RBTX4939 ethernet address initialization
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] mips: clear IV bit in CP0 cause if the CPU doesn't support divec
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] mips: clear IV bit in CP0 cause if the CPU doesn't support divec
  • From: "Kevin D. Kissell" <kevink@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] mips: clear IV bit in CP0 cause if the CPU doesn't support divec
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• [PATCH 1/1] mips: clear IV bit in CP0 cause if the CPU doesn't support divec
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• SMTC Patches [2 of 3]
  • From: "Kevin D. Kissell" <kevink@xxxxxxxxxxxxx>
• SMTC Patches [3 of 3]
  • From: "Kevin D. Kissell" <kevink@xxxxxxxxxxxxx>
• SMTC Patches [0 of 3]
  • From: "Kevin D. Kissell" <kevink@xxxxxxxxxxxxx>
• SMTC Patches [1 of 3]
  • From: "Kevin D. Kissell" <kevink@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ide: Add tx4939ide driver
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] TXx9: Add TX4939 ATA support
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH 1/2] ide: Add tx4939ide driver
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: 2.6.27-rc5-mm1
  • From: Dmitri Vorobiev <dmitri.vorobiev@xxxxxxxxx>
• [PATCH] au1000: fix gpio output
  • From: Bruno Randolf <br1@xxxxxxxxxxx>
• [PATCH] IP22: Fix detection of second HPC3 on Challenge S
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] TXx9: Add TX4939 SoC support
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 4/6] TXx9: Add TX4939 SoC support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 4/6] TXx9: Add TX4939 SoC support
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 2/6] TXx9: Microoptimize interrupt handlers
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [ANNOUNCE] Git User's Survey 2008
  • From: Jakub Narebski <jnareb@xxxxxxxxx>
• Re: [PATCH 2/6] TXx9: Microoptimize interrupt handlers
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 4/6] TXx9: Add TX4939 SoC support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 3/6] TXx9: IOC LED support
  • From: Geert Uytterhoeven <Geert.Uytterhoeven@xxxxxxxxxxx>
• Re: [PATCH 3/6] TXx9: IOC LED support
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] RBTX4927: Add gpio-led support
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [2.6 patch] remove drivers/pcmcia/au1000_pb1x00.c
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 3/6] TXx9: IOC LED support
  • From: Geert Uytterhoeven <Geert.Uytterhoeven@xxxxxxxxxxx>
• Re: [PATCH 1/6] TXx9: stop_unused_modules
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 6/6] TXx9: Implement prom_free_prom_memory
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH 5/6] TXx9: Add RBTX4939 board support
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH 4/6] TXx9: Add TX4939 SoC support
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH 3/6] TXx9: IOC LED support
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH 1/6] TXx9: stop_unused_modules
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH 2/6] TXx9: Microoptimize interrupt handlers
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] IP22: Fix handling of memory for I2 with more than 256MB
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• [2.6 patch] remove drivers/pcmcia/au1000_pb1x00.c
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• [RFC: 2.6 patch] remove MIPS_XXS1500
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• [PATCH] IP22: Fix handling of memory for I2 with more than 256MB
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [Patch 0/6] MIPS: Hardware watch register support for gdb (version 3).
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: [PATCH] fs/ubifs: Use an IS_ERR test rather than a NULL test
  • From: Artem Bityutskiy <dedekind@xxxxxxxxxxxxx>
• [PATCH] fs/ubifs: Use an IS_ERR test rather than a NULL test
  • From: Julien Brunel <brunel@xxxxxxx>
• [Patch 6/6] MIPS: Ptrace support for HARDWARE_WATCHPOINTS
  • From: David Daney <ddaney@xxxxxxxxxx>
• Hope help for Baget/MIPS series
  • From: zhanglei459 <zhanglei459@xxxxxxxxx>
• [Patch 5/6] MIPS: Scheduler support for HARDWARE_WATCHPOINTS.
  • From: David Daney <ddaney@xxxxxxxxxx>
• [Patch 4/6] MIPS: Watch exception handling for HARDWARE_WATCHPOINTS.
  • From: David Daney <ddaney@xxxxxxxxxx>
• [Patch 3/6] MIPS: Probe watch registers and report configuration.
  • From: David Daney <ddaney@xxxxxxxxxx>
• [Patch 2/6] MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.
  • From: David Daney <ddaney@xxxxxxxxxx>
• Patch [1/6] MIPS: Add HARDWARE_WATCHPOINTS configure option.
  • From: David Daney <ddaney@xxxxxxxxxx>
• [Patch 0/6] MIPS: Hardware watch register support for gdb (version 3).
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: [PATCH] Remove never used pci_probe variable
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 02/59] CRED: Wrap task credential accesses in the MIPS arch
  • From: David Howells <dhowells@xxxxxxxxxx>
• Re: [PATCH] Remove never used pci_probe variable
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Remove never used pci_probe variable
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: What's up with cpu_is_noncoherent_r10000() ?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] e100: Add missing dma sync for proper operation with non-coherent caches.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Probe initrd header only if explicitly specified
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Add missing local_flush_icache_range initialization for TX39
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: Grant Grundler <grundler@xxxxxxxxxxxxxxxx>
• Re: [PATCH] e100: Add missing dma sync for proper operation with non-coherent caches.
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: [PATCH] e100: Add missing dma sync for proper operation with non-coherent caches.
  • From: David Acker <dacker@xxxxxxxxxx>
• Re: [E1000-devel] [PATCH] e100: Add missing dma sync for proper operation with non-coherent caches.
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: [E1000-devel] [PATCH] e100: Add missing dma sync for proper operation with non-coherent caches.
  • From: "Kok, Auke" <auke-jan.h.kok@xxxxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH] Probe initrd header only if explicitly specified
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] Probe initrd header only if explicitly specified
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] Add missing local_flush_icache_range initialization for TX39
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] Probe initrd header only if explicitly specified
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] Probe initrd header only if explicitly specified
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH] TXx9: Fix txx9_pcode initialization
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][RFT] au1000: convert to gpiolib
  • From: Manuel Lauss <mano@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Fix data bus error recovery
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Fix WARNING: at kernel/smp.c:290
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] TXx9: Fix txx9_pcode initialization
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: sparsemem support for mips with highmem
  • From: Andy Whitcroft <apw@xxxxxxxxxxxx>
• [PATCH] e100: Add missing dma sync for proper operation with non-coherent caches.
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: What's up with cpu_is_noncoherent_r10000() ?
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: What's up with cpu_is_noncoherent_r10000() ?
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: What's up with cpu_is_noncoherent_r10000() ?
  • From: Thiemo Seufer <ths@xxxxxxxxxxxx>
• What's up with cpu_is_noncoherent_r10000() ?
  • From: David Daney <ddaney@xxxxxxxxxx>
• Re: [PATCH 1/5] rb532: remove obsolute reference to setup_serial_port
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH][RFT] au1000: convert to gpiolib
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: Joel Soete <soete.joel@xxxxxxxxxx>
• [PATCH 5/5] Documentation: document the rb532 specific kmac tag
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 3/5] rb532: remove unused rc32434_sync_delay and rc32434_sync_udelay
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 4/5] rb532: convert to GPIO lib
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 2/5] rb532: cleanup the headers again
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 1/5] rb532: remove obsolute reference to setup_serial_port
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 2/5] rb532: use physical addresses for gpio and device controller registers
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH 5/5] rb532: fix id usage in platform devices
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 4/5] rb532: replace raw volatile read with a readl
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 3/5] rb532: remove gpio bootup state
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 2/5] rb532: use physical addresses for gpio and device controller registers
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 1/5] rb532: cleanup and group definitions to their right places
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 3/6] rb532: do not KSEG1ADDR an already virtual address
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [PATCH 2/6] rb532: use physical addresses for gpio and device controller registers
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: "Joel Soete" <soete.joel@xxxxxxxxxx>
• Bus/cache error on partition check
  • From: "Alex Gonzalez" <langabe@xxxxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [PATCH 3/6] rb532: do not KSEG1ADDR an already virtual address
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 2/6] rb532: use physical addresses for gpio and device controller registers
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 2/2] OCTEON: Add workaround file
  • From: Tomaso Paoletti <tpaoletti@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] OCTEON: Add workaround file
  • From: Tomaso Paoletti <tpaoletti@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] OCTEON: Add processor-specific constants and detection of CPU variants
  • From: Tomaso Paoletti <tpaoletti@xxxxxxxxxxxxxxxxxx>
• [PATCH 6/6] rb532: fix id usage
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 4/6] rb532: remove gpio bootup state
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 5/6] rb532: replace volatile rough read with a readl
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 3/6] rb532: do not KSEG1ADDR an already virtual address
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 1/6] rb532: cleanup and group definitions to their right places
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 2/6] rb532: use physical addresses for gpio and device controller registers
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: [PATCH 1/2] OCTEON: Add processor-specific constants and detection of CPU variants
  • From: Tomaso Paoletti <tpaoletti@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH][MIPS] cobalt: select PCI
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• Re: [PATCH] cobalt: group UART definition into header
  • From: Yoichi Yuasa <yoichi_yuasa@xxxxxxxxxxxxxx>
• Re: [PATCH] cobalt: group UART definition into header
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] cobalt: group UART definition into header
  • From: Yoichi Yuasa <tripeaks@xxxxxxxxx>
• [PATCH] cobalt: group UART definition into header
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] mips: Add dma_mmap_coherent()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 2/2] OCTEON: Add workaround file
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] OCTEON: Add processor-specific constants and detection of CPU variants
  • From: tsbogend@xxxxxxxxxxxxxxxx (Thomas Bogendoerfer)
• Re: sparsemem support for mips with highmem
  • From: Christoph Lameter <cl@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Initial support for OCTEON
  • From: Tomaso Paoletti <tpaoletti@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] OCTEON: Add workaround file
  • From: Tomaso Paoletti <tpaoletti@xxxxxxxxxxxxxxxxxx>