Hello.
Ralf Baechle wrote:
The Swarm IDE driver uses a release method which is defined in the driver
itself thus potentially oopsable. The simple fix would be to just leak
the device but this patch goes the full length and moves the entire
handling of the platform device in the platform code and retains only
the platform driver code in drivers/ide/mips/swarm.c.
Signed-off-by: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Acked-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
Index: linux-mips/arch/mips/sibyte/swarm/platform.c
===================================================================
--- /dev/null
+++ linux-mips/arch/mips/sibyte/swarm/platform.c
@@ -0,0 +1,81 @@
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+
+#include <asm/sibyte/board.h>
+#include <asm/sibyte/sb1250_genbus.h>
+#include <asm/sibyte/sb1250_regs.h>
+
+#define DRV_NAME "pata-swarm"
Hm, what driver? This is just a platform code. :-)
+
+#define SWARM_IDE_SHIFT 5
+#define SWARM_IDE_BASE 0x1f0
+#define SWARM_IDE_CTRL 0x3f6
+
+static struct resource swarm_pata_resource[] = {
+ {
+ .name = "Swarm GenBus IDE",
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "Swarm GenBus IDE",
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "Swarm GenBus IDE",
+ .flags = IORESOURCE_IRQ,
+ .start = K_INT_GB_IDE,
+ .end = K_INT_GB_IDE,
Giving the resources similar names is pointless. You can just leave
the 'name' field uninitialized.
MBR, Sergei
