[PATCH] TXx9: Add TX4938 ATA support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add a helper routine to register tx4938ide driver and use it on
RBTX4938 board.

Signed-off-by: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
---
 arch/mips/include/asm/txx9/tx4938.h   |   13 +++++++++++
 arch/mips/txx9/generic/setup_tx4938.c |   38 +++++++++++++++++++++++++++++++++
 arch/mips/txx9/rbtx4938/setup.c       |    1 +
 3 files changed, 52 insertions(+), 0 deletions(-)

diff --git a/arch/mips/include/asm/txx9/tx4938.h b/arch/mips/include/asm/txx9/tx4938.h
index 989e775..3dada66 100644
--- a/arch/mips/include/asm/txx9/tx4938.h
+++ b/arch/mips/include/asm/txx9/tx4938.h
@@ -292,4 +292,17 @@ void tx4938_setup_pcierr_irq(void);
 void tx4938_irq_init(void);
 void tx4938_mtd_init(int ch);
 
+struct tx4938ide_platform_info {
+	/*
+	 * I/O port shift, for platforms with ports that are
+	 * constantly spaced and need larger than the 1-byte
+	 * spacing used by ata_std_ports().
+	 */
+	unsigned int ioport_shift;
+	unsigned int gbus_clock;	/*  0 means no-autotune. */
+	unsigned int ebus_ch;
+};
+
+void tx4938_ata_init(unsigned int irq, unsigned int shift, int tune);
+
 #endif
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index af724e5..a5951ed 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -16,6 +16,7 @@
 #include <linux/param.h>
 #include <linux/ptrace.h>
 #include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
 #include <asm/reboot.h>
 #include <asm/traps.h>
 #include <asm/txx9irq.h>
@@ -335,6 +336,43 @@ void __init tx4938_mtd_init(int ch)
 	txx9_physmap_flash_init(ch, start, size, &pdata);
 }
 
+void __init tx4938_ata_init(unsigned int irq, unsigned int shift, int tune)
+{
+	struct platform_device *pdev;
+	struct resource res[] = {
+		{
+			.start = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	struct tx4938ide_platform_info pdata = {
+		.ioport_shift = shift,
+		.gbus_clock = tune ? txx9_gbus_clock : 0,
+	};
+	int i;
+
+	if ((__raw_readq(&tx4938_ccfgptr->pcfg) &
+	     (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL))
+	    != TX4938_PCFG_ATA_SEL)
+		return;
+	for (i = 0; i < 8; i++) {
+		/* check EBCCRn.ISA, EBCCRn.BSZ, EBCCRn.ME */
+		if ((__raw_readq(&tx4938_ebuscptr->cr[i]) & 0x00f00008)
+		    == 0x00e00008)
+			break;
+	}
+	if (i == 8)
+		return;
+	pdata.ebus_ch = i;
+
+	pdev = platform_device_alloc("tx4938ide", -1);
+	if (!pdev ||
+	    platform_device_add_resources(pdev, res, ARRAY_SIZE(res)) ||
+	    platform_device_add_data(pdev, &pdata, sizeof(pdata)) ||
+	    platform_device_add(pdev))
+		platform_device_put(pdev);
+}
+
 static void __init tx4938_stop_unused_modules(void)
 {
 	__u64 pcfg, rst = 0, ckd = 0;
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index e077cc4..547ff29 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -352,6 +352,7 @@ static void __init rbtx4938_device_init(void)
 	rbtx4938_ne_init();
 	tx4938_wdt_init();
 	rbtx4938_mtd_init();
+	tx4938_ata_init(RBTX4938_IRQ_IOC_ATA, 0, 1);
 	txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL);
 }
 
-- 
1.5.6.3



[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux