Hello.
Atsushi Nemoto wrote:
This is the driver for the Toshiba TX4939 SoC ATA controller.
This controller has standard ATA taskfile registers and DMA
command/status registers, but the register layout is swapped on big
endian. There are some other endian issue and some special registers
which requires many custom dma_ops/port_ops routines.
Signed-off-by: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
[...]
diff --git a/drivers/ide/mips/tx4939ide.c b/drivers/ide/mips/tx4939ide.c
new file mode 100644
index 0000000..ba9776d
--- /dev/null
+++ b/drivers/ide/mips/tx4939ide.c
@@ -0,0 +1,762 @@
[...]
+static int __tx4939ide_dma_setup(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct request *rq = HWGROUP(drive)->rq;
+ unsigned int reading;
+ u8 dma_stat;
+ unsigned long base = TX4939IDE_BASE(hwif);
+
+ if (rq_data_dir(rq))
+ reading = 0;
+ else
+ reading = 1 << 3;
+
+ /* fall back to pio! */
+ if (!ide_build_dmatable(drive, rq)) {
+ ide_map_sg(drive, rq);
+ return 1;
+ }
+#ifdef __BIG_ENDIAN
+ {
+ unsigned int *table = hwif->dmatable_cpu;
s/unsigned int/__le32/ perhaps?
+ while (1) {
+ cpu_to_le64s((u64 *)table);
Wait, PRD is already already in LE format, so this should be
le64_to_cpus().
+ if (*table & 0x80000000)
Hum... you don't have to check that with ide_build_dmatable()
returning the PRD count...
+ break;
+ table += 2;
+ }
+ }
+#endif
MBR, Sergei
