Hi Nemoto-san,
My RBTX4927 with VxWorks boot loader crashes in prom_getenv() since commit
860e546c19d88c21819c7f0861c505debd2d6eed ("MIPS: TXx9: Early command-line
preprocessing"):
| Tlb Load Exception
| Exception Program Counter: 0x80324e60
| Status Register: 0x36008700
| Cause Register: 0x00000008
| Access Address : 0x00002000
| Task: 0x87fe7fc0 ""
| 8031e714: 80328cc0 (0, 1, 0, 0)
| 80328ce4: 80325238 (80126350, 0, 80340000, 0)
| 8032550c: 80324e0c (0, 0, 0, 736e6f63)
|
| $0 = 0 t0 = ffffffff8030fc40 s0 = ffffffff80340000
| at = 6d t1 = ffffffff80310000 s1 = ffffffff80310000
| v0 = 2000 t2 = ffffffff80350000 s2 = ffffffff802e0000
| v1 = ffffffff8030f7c7 t3 = ffffffff80350000 s3 = ffffffff80002000
| a0 = ffffffff802dfe1c t4 = ffffffff80350000 s4 = 1
| a1 = 2000 t5 = 0 s5 = ffffffff802e0000
| a2 = ffffffff802dfe1c t6 = 0 s6 = ffffffff80789384
| a3 = 0 t7 = ffffffffbc020280 s7 = 1e0
| s8 = ffffffff80104430 k0 = 0
| gp = ffffffff8030c000 k1 = 0 t8 = 0
| ra = ffffffff80325514 sp = ffffffff8030de38 t9 = ffffffffffffffff
| divlo = 2 divhi = 4 sr = 36008700
| pc = 80324e60
After making the following change:
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 5526375..96692b6 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -416,6 +416,11 @@ const char *__init prom_getenv(const char *name)
{
const s32 *str = (const s32 *)fw_arg2;
+printk("fw_arg0 = 0x%lx\n", fw_arg0);
+printk("fw_arg1 = 0x%lx\n", fw_arg1);
+printk("fw_arg2 = 0x%lx\n", fw_arg2);
+printk("fw_arg3 = 0x%lx\n", fw_arg3);
+return NULL;
if (!str)
return NULL;
/* YAMON style ("name", "value" pairs) */
it boots again and prints:
| fw_arg0 = 0x80002000
| fw_arg1 = 0x80001fe0
| fw_arg2 = 0x2000
| fw_arg3 = 0x20
So your assumption that bootloaders other than YAMON pass NULL for fw_arg2 is
apparently wrong.
BTW, after making this change, I still have another issue with the network.
I get
| ne.c:v1.10 9/23/94 Donald Becker (becker@xxxxxxxxx)
| Last modified Nov 1, 2000 by Paul Gortmaker
| NE*000 ethercard probe at 0x6020280:<4>eth%d: interrupt from stopped card
| irq 13: nobody cared (try booting with the "irqpoll" option)
| Call Trace:
| [<8010cd90>] dump_stack+0x8/0x34
| [<8014d944>] __report_bad_irq+0x4c/0xb0
| [<8014db28>] note_interrupt+0x180/0x200
| [<8014ebbc>] handle_level_irq+0xc4/0x114
| [<80107cb4>] plat_irq_dispatch+0x74/0x94
| [<80100424>] ret_from_irq+0x0/0x4
| [<8012bab0>] __do_softirq+0x54/0x140
| [<8012bbf8>] do_softirq+0x5c/0x90
| [<8012c094>] irq_exit+0x40/0x90
| [<80100424>] ret_from_irq+0x0/0x4
| [<8014d0a0>] __setup_irq+0x214/0x2a4
| [<8014d210>] request_irq+0xe0/0x128
| [<80340e50>] ne_probe1+0x4c8/0x660
| [<80341234>] ne_drv_probe+0xd4/0x170
| [<80229214>] driver_probe_device+0xf0/0x1a8
| [<8022933c>] __driver_attach+0x70/0xa8
| [<80228700>] bus_for_each_dev+0x54/0xa0
| [<80228bb4>] bus_add_driver+0xc4/0x1e8
| [<80229594>] driver_register+0xb4/0x15c
| [<8022a330>] platform_driver_probe+0x18/0x74
| [<80340968>] ne_init+0x20/0x40
| [<8010759c>] __kprobes_text_end+0x64/0x1c4
| [<8032a5fc>] kernel_init+0x8c/0xfc
| [<80109124>] kernel_thread_helper+0x10/0x18
|
| handlers:
| [<802348b8>] (eip_interrupt+0x0/0x360)
| Disabling IRQ #13
| 00:60:0a:00:45:33
| eth0: RBHMA4X00/RTL8019 found at 0x6020280, using IRQ 13.
and
| WARNING: at net/sched/sch_generic.c:226 dev_watchdog+0x168/0x25c()
| NETDEV WATCHDOG: eth0 (): transmit timed out
| Modules linked in:
| Call Trace:
| [<8010cd90>] dump_stack+0x8/0x34
| [<801262f8>] warn_slowpath+0x80/0xac
| [<80259ab4>] dev_watchdog+0x168/0x25c
| [<80130ab0>] run_timer_softirq+0x168/0x20c
| [<8012bae0>] __do_softirq+0x84/0x140
| [<8012bbf8>] do_softirq+0x5c/0x90
| [<8012c094>] irq_exit+0x40/0x90
| [<80100424>] ret_from_irq+0x0/0x4
| [<80108620>] r4k_wait_irqoff+0x4c/0x54
| [<80109300>] cpu_idle+0x2c/0x54
| [<8032aa1c>] start_kernel+0x3b0/0x3e4
|
| ---[ end trace ecf0edc63f731c6d ]---
| ..<7>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=1873.
| ..<7>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=5533.
| timed out!
| IP-Config: Reopening network devices...
| Sending DHCP requests ..<7>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=733.
| ..<7>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=2319.
| ..<7>eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=6709.
| timed out!
| IP-Config: Reopening network devices...
This is plain 2.6.27+ as of yesterday. I'll see if it goes away with today's
linux-mips git tree.
With kind regards,
Geert Uytterhoeven
Software Architect
Sony Techsoft Centre Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium
Phone: +32 (0)2 700 8453
Fax: +32 (0)2 700 8622
E-mail: Geert.Uytterhoeven@xxxxxxxxxxx
Internet: http://www.sony-europe.com/
A division of Sony Europe (Belgium) N.V.
VAT BE 0413.825.160 · RPR Brussels
Fortis · BIC GEBABEBB · IBAN BE41293037680010
