[PATCH 10/12] MIPS: Markeins: Remove runtime debug prints

[Shinya Kuribayashi <skuribay@xxxxxxxxxxxxxx>]

Remove runtime db_* macros as we don't need them any more.  In general,
such helpers are useful for initial porting, but once approved, they are
not indispensable.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@xxxxxxxxx>
---
arch/mips/emma/markeins/irq.c |   17 -----------------
1 files changed, 0 insertions(+), 17 deletions(-)

diff --git a/arch/mips/emma/markeins/irq.c b/arch/mips/emma/markeins/irq.c
index ada33d8..03a663a 100644
--- a/arch/mips/emma/markeins/irq.c
+++ b/arch/mips/emma/markeins/irq.c
@@ -32,7 +32,6 @@
#include <asm/irq_cpu.h>
#include <asm/system.h>
#include <asm/mipsregs.h>
-#include <asm/debug.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>

@@ -67,7 +66,6 @@ void ll_emma2rh_irq_enable(int emma2rh_irq)
		    (emma2rh_irq / 32);
	reg_value = emma2rh_in32(reg_index);
	reg_bitmask = 0x1 << (emma2rh_irq % 32);
-	db_assert((reg_value & reg_bitmask) == 0);
	emma2rh_out32(reg_index, reg_value | reg_bitmask);
}

@@ -82,7 +80,6 @@ void ll_emma2rh_irq_disable(int emma2rh_irq)
		    (emma2rh_irq / 32);
	reg_value = emma2rh_in32(reg_index);
	reg_bitmask = 0x1 << (emma2rh_irq % 32);
-	db_assert((reg_value & reg_bitmask) != 0);
	emma2rh_out32(reg_index, reg_value & ~reg_bitmask);
}

@@ -118,9 +115,6 @@ void ll_emma2rh_sw_irq_enable(int irq)
{
	u32 reg;

-	db_assert(irq >= 0);
-	db_assert(irq < NUM_EMMA2RH_IRQ_SW);
-
	reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
	reg |= 1 << irq;
	emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
@@ -130,9 +124,6 @@ void ll_emma2rh_sw_irq_disable(int irq)
{
	u32 reg;

-	db_assert(irq >= 0);
-	db_assert(irq < 32);
-
	reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
	reg &= ~(1 << irq);
	emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
@@ -170,9 +161,6 @@ void ll_emma2rh_gpio_irq_enable(int irq)
{
	u32 reg;

-	db_assert(irq >= 0);
-	db_assert(irq < NUM_EMMA2RH_IRQ_GPIO);
-
	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
	reg |= 1 << irq;
	emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
@@ -182,9 +170,6 @@ void ll_emma2rh_gpio_irq_disable(int irq)
{
	u32 reg;

-	db_assert(irq >= 0);
-	db_assert(irq < NUM_EMMA2RH_IRQ_GPIO);
-
	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
	reg &= ~(1 << irq);
	emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
@@ -314,8 +299,6 @@ void __init arch_init_irq(void)
{
	u32 reg;

-	db_run(printk("markeins_irq_setup invoked.\n"));
-
	/* by default, interrupts are disabled. */
	emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0);
	emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0);