Linux IDE Archive

• Thread Index

• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Mark Lord
• Re: Bart's efforts?
  • From: Alan Cox
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Jeff Garzik
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Alan Cox
• Re: Bart's efforts?
  • From: Mark Lord
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Mark Lord
• [PATCH] Re: Should be Acard ATP8620 2SATA / 1 IDE driver
  • From: Jeff Garzik
• Re: [Bugme-new] [Bug 9320] New: PATA scan: ACPI Exception AE_AML_PACKAGE_LIMIT... is beyond end of object
  • From: Matthew Garrett
• Re: Should be Acard ATP8620 2SATA / 1 IDE driver
  • From: Jeff Garzik
• Re: Should be Acard ATP8620 2SATA / 1 IDE driver
  • From: Jeff Garzik
• Re: [Bugme-new] [Bug 9320] New: PATA scan: ACPI Exception AE_AML_PACKAGE_LIMIT... is beyond end of object
  • From: Andrew Morton
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Denys Fedoryshchenko
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Denys Fedoryshchenko
• Re: 2.6.24-rc1: pata_amd fails to detect 80-pin wire
  • From: Andrew Morton
• Re: libata: cdrw/dvdrom disabed after s2ram (2.6.24-rc2)
  • From: Andrew Morton
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Mark Lord
• Re: [PATCH 1/4] libata sata_qstor fix oops on rmmod
  • From: Mark Lord
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Denys Fedoryshchenko
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: James Andrewartha
• [PATCH 4/4] libata sata_qstor conversion to new error handling (EH).
  • From: Mark Lord
• [PATCH 3/4] libata sata_qstor workaround for spurious interrupts
  • From: Mark Lord
• [PATCH 2/4] libata sata_qstor nuke idle state
  • From: Mark Lord
• [PATCH 1/4] libata sata_qstor fix oops on rmmod
  • From: Mark Lord
• Re: [PATCH 1/2] libata: Support PIO polling-only hosts.
  • From: Alan Cox
• Re: [PATCH 1/2] libata: Support PIO polling-only hosts.
  • From: Alan Cox
• Re: [PATCH 1/2] libata: Support PIO polling-only hosts.
  • From: Paul Mundt
• Re: [PATCH 1/2] libata: Support PIO polling-only hosts.
  • From: Mark Lord
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Denys Fedoryshchenko
• Re: [PATCH 1/2] libata: Support PIO polling-only hosts.
  • From: Paul Mundt
• Re: [PATCH 2/2] libata: pata_platform: Support polling-mode configuration.
  • From: Alan Cox
• Re: [PATCH 1/2] libata: Support PIO polling-only hosts.
  • From: Alan Cox
• Re: sata NCQ blacklist entry
  • From: Tejun Heo
• [PATCH 2/2] libata: pata_platform: Support polling-mode configuration.
  • From: Paul Mundt
• [PATCH 1/2] libata: Support PIO polling-only hosts.
  • From: Paul Mundt
• Re: AHCI + ST3160023AS + NCQ problems
  • From: Matheus Izvekov
• Re: question about sata-error on boot.
  • From: Andrew Morton
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Andrew Morton
• Re: [PATCH] SCSI: Add the SGPIO support for sata_nv.c
  • From: Yinghai Lu
• [PATCH] ata_piix: add SATELLITE PRO U200 to broken suspend list
  • From: Tejun Heo
• Re: [PATCH 05/12] libata: xfer_mask is unsigned int not unsigned long
  • From: Tejun Heo
• Hitachi SATA HSM violation (Was: Re: Adding SATA disk with broken NCQ)
  • From: Simos Xenitellis
• only one drive in a port multiplier system is being recognized
  • From: Greg Hennessy
• Re: Strange freezes (seems like SATA related)
  • From: Max Krasnyansky
• Re: [PATCH 7/15] ide: remove atapi_ireason_t
  • From: Sergei Shtylyov
• Re: [PATCH 05/12] libata: xfer_mask is unsigned int not unsigned long
  • From: Jeff Garzik
• Re: Maxtor 6L200M0 sata irq timeouts
  • From: Michal Suchanek
• Re: [PATCH 11/18] pdc202xx_new: move PIO programming code to pdcnew_set_pio_mode()
  • From: Sergei Shtylyov
• Re: [PATCH] pata_hpt37x: Fix outstanding bug reports on the HPT374 and 37x cable detect
  • From: Alan Cox
• Re: [PATCH] pata_hpt37x: Fix outstanding bug reports on the HPT374 and 37x cable detect
  • From: Sergei Shtylyov
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Alan Cox
• Re: [PATCH 2/2] sl82c105: remove no longer needed ->selectproc method
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] sl82c105: program DMA/PIO timings in ->dma_start/->ide_dma_end
  • From: Sergei Shtylyov
• Re: [PATCH 18/18] ide: remove redundant DMA blacklist check from __ide_dma_on()
  • From: Sergei Shtylyov
• Re: [PATCH 16/18] ide: remove redundant ->ide_dma_on call from set_using_dma()
  • From: Sergei Shtylyov
• Re: [PATCH 13/18] ide: don't BUG() on unsupported transfer modes
  • From: Sergei Shtylyov
• Re: [PATCH 10/18] ide: make 'extra' field in struct ide_port_info u8
  • From: Sergei Shtylyov
• Re: [PATCH 5/18] ide: add missing HOB bit clearing to ide_dump_ata_status()
  • From: Sergei Shtylyov
• Re: [PATCH 4/18] ide: move ide_fixstring() documentation to ide-iops.c from ide.h
  • From: Sergei Shtylyov
• Re: [PATCH 3/18] ide: add missing #ifdef/#endif CONFIG_IDE_TASK_IOCTL
  • From: Sergei Shtylyov
• Re: [PATCH 2/18] ide-pmac: skip conservative PIO "downgrade"
  • From: Sergei Shtylyov
• Re: [PATCH 1/18] ide: fix ide_find_dma_mode() to print human-readable info
  • From: Sergei Shtylyov
• Re: [PATCH 11/12] libata: add ATA_CBL_PATA_IGN
  • From: Alan Cox
• Re: [PATCH 04/12] libata: kill ata_id_to_dma_mode()
  • From: Tejun Heo
• Re: [PATCH 08/12] libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi
  • From: Tejun Heo
• Re: [PATCH 11/12] libata: add ATA_CBL_PATA_IGN
  • From: Tejun Heo
• Re: [PATCH 06/12] libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes()
  • From: Tejun Heo
• Re: [PATCH 11/12] libata: add ATA_CBL_PATA_IGN
  • From: Alan Cox
• Re: [PATCH 05/12] libata: xfer_mask is unsigned int not unsigned long
  • From: Tejun Heo
• Re: [PATCH 08/12] libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi
  • From: Alan Cox
• Re: [PATCH 12/12] pata_amd: update mode selection for NV PATAs
  • From: Alan Cox
• Re: [PATCH 07/12] libata: fix ata_acpi_gtm_xfermask()
  • From: Alan Cox
• Re: [PATCH 06/12] libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes()
  • From: Alan Cox
• Re: [PATCH 05/12] libata: xfer_mask is unsigned int not unsigned long
  • From: Alan Cox
• Re: [PATCH 04/12] libata: kill ata_id_to_dma_mode()
  • From: Alan Cox
• Re: [PATCH] pata_hpt37x: Fix outstanding bug reports on the HPT374 and 37x cable detect
  • From: Alan Cox
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Tejun Heo
• Re: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
  • From: Bruce Allen
• [PATCH 12/12] pata_amd: update mode selection for NV PATAs
  • From: Tejun Heo
• [PATCH 05/12] libata: xfer_mask is unsigned int not unsigned long
  • From: Tejun Heo
• [PATCH 08/12] libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi
  • From: Tejun Heo
• [PATCH 09/12] libata: implement ata_acpi_init_gtm()
  • From: Tejun Heo
• [PATCH 10/12] libata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask()
  • From: Tejun Heo
• [PATCH 07/12] libata: fix ata_acpi_gtm_xfermask()
  • From: Tejun Heo
• [PATCH 11/12] libata: add ATA_CBL_PATA_IGN
  • From: Tejun Heo
• [PATCH 06/12] libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes()
  • From: Tejun Heo
• [PATCH 03/12] libata: clean up xfermode / PATA timing related stuff
  • From: Tejun Heo
• [PATCH 02/12] libata: export xfermode / PATA timing related functions
  • From: Tejun Heo
• [PATCH 04/12] libata: kill ata_id_to_dma_mode()
  • From: Tejun Heo
• [PATCH 01/12] ata_generic: unindent loop in generic_set_mode()
  • From: Tejun Heo
• [PATCHSET] libata: update timing and fix pata_amd transfer mode selection
  • From: Tejun Heo
• [PATCH 3/8 UPDATED] libata: factor out ata_eh_schedule_probe()
  • From: Tejun Heo
• Re: [PATCH] pata_hpt37x: Fix outstanding bug reports on the HPT374 and 37x cable detect
  • From: Andrew Morton
• Adding SATA disk with broken NCQ
  • From: Simos Xenitellis
• [git patches] libata fixes
  • From: Jeff Garzik
• [PATCH 1/2] sl82c105: program DMA/PIO timings in ->dma_start/->ide_dma_end
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/2] sl82c105: remove no longer needed ->selectproc method
  • From: Bartlomiej Zolnierkiewicz
• Re: [git patches] Add and use media change notification
  • From: Jeff Garzik
• [PATCH] libata: handle broken cable reporting
  • From: Alan Cox
• [PATCH] pata_hpt37x: Fix outstanding bug reports on the HPT374 and 37x cable detect
  • From: Alan Cox
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: fix IDE_HFLAG_NO_ATAPI_DMA handling in config_drive_for_dma()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 7/15] ide: remove atapi_ireason_t
  • From: Bartlomiej Zolnierkiewicz
• Re: Suspend to ram regression (2.6.24-rc1-git)
  • From: Kristen Carlson Accardi
• Re: IDE Problem with old Gateway laptop -SOLVED
  • From: Declan Moriarty
• [PATCH] pata_serverworks: Fix problem with some drive combinations
  • From: Alan Cox
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Alan Cox
• Re: Suspend to ram regression (2.6.24-rc1-git)
  • From: Jeff Garzik
• Re: Suspend to ram regression (2.6.24-rc1-git)
  • From: Jens Axboe
• Re: [PATCH 3/8] libata: factor out ata_eh_schedule_probe()
  • From: Tejun Heo
• Re: [PATCH 3/8] libata: factor out ata_eh_schedule_probe()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/8] libata: clean up EH speed down implementation
  • From: Tejun Heo
• [PATCH 8/8] libata: implement fast speed down for unverified data transfer mode
  • From: Tejun Heo
• [PATCH 7/8] libata: implement ATA_DFLAG_DUBIOUS_XFER
  • From: Tejun Heo
• [PATCH 6/8] libata: adjust speed down rules
  • From: Tejun Heo
• [PATCH 4/8] libata: move ata_set_mode() to libata-eh.c
  • From: Tejun Heo
• [PATCH 1/8] libata: rearrange ATA_DFLAG_*
  • From: Tejun Heo
• [PATCHSET] libata: update EH speed down logic, take #2
  • From: Tejun Heo
• [PATCH 2/8] libata: add protocol data transfer tests
  • From: Tejun Heo
• [PATCH 3/8] libata: factor out ata_eh_schedule_probe()
  • From: Tejun Heo
• Re: [git patches] Add and use media change notification
  • From: Linus Torvalds
• Re: [PATCH]libata-acpi: add ACPI _PSx method
  • From: Shaohua Li
• Re: [PATCH]libata-acpi: add ACPI _PSx method
  • From: Shaohua Li
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Daniel Drake
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Tejun Heo
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Alan Cox
• Re: [PATCH 2/18] ide-pmac: skip conservative PIO "downgrade"
  • From: Benjamin Herrenschmidt
• [PATCH 18/18] ide: remove redundant DMA blacklist check from __ide_dma_on()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 17/18] ide: cleanup ide_set_dma()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 16/18] ide: remove redundant ->ide_dma_on call from set_using_dma()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/18] sc1200: move DMA timings to timing tables
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/18] ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/18] ide: don't BUG() on unsupported transfer modes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/18] sis5513: factor out UDMA programming code
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/18] pdc202xx_new: move PIO programming code to pdcnew_set_pio_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 9/18] ide: kill duplicate code in ide_dump_{ata,atapi}_status()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/18] ide: make 'extra' field in struct ide_port_info u8
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/18] ide-disk: use ide_get_lba_addr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/18] ide: add ide_tf_read() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/18] ide: fix registers loading order in ide_dump_ata_status()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/18] ide: add missing HOB bit clearing to ide_dump_ata_status()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/18] ide: move ide_fixstring() documentation to ide-iops.c from ide.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/18] ide: add missing #ifdef/#endif CONFIG_IDE_TASK_IOCTL
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/18] ide-pmac: skip conservative PIO "downgrade"
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/18] ide: fix ide_find_dma_mode() to print human-readable info
  • From: Bartlomiej Zolnierkiewicz
• SATA eating my disk, port reset, destroying unrelated data
  • From: Norbert Preining
• Re: [PATCH 8/15] ide-cd: fix register loading order in cdrom_start_packet_command()
  • From: Sergei Shtylyov
• Re: [PATCH 6/15] ide: remove ata_nsector_t, ata_data_t and atapi_bcount_t
  • From: Sergei Shtylyov
• Re: [PATCH 5/15] ide: remove atapi_feature_t
  • From: Sergei Shtylyov
• [git patches] Add and use media change notification
  • From: Jeff Garzik
• Re: [PATCH 7/15] ide: remove atapi_ireason_t
  • From: Sergei Shtylyov
• Re: [PATCH 1/15] ide-floppy: remove dead code
  • From: Sergei Shtylyov
• Re: [PATCH 12/15] ide: remove SELECT_INTERRUPT()
  • From: Sergei Shtylyov
• Re: [PATCH 9/15] ide-{floppy,tape,scsi}: fix register loading order when issuing packet command
  • From: Sergei Shtylyov
• Re: [PATCH 11/15] ide: remove QUIRK_LIST()
  • From: Sergei Shtylyov
• Re: [PATCH 4/15] ide: remove atapi_error_t
  • From: Sergei Shtylyov
• Re: [PATCH 1/9] ide-disk: fix __ide_do_rw_disk() to use ->OUTBSYNC
  • From: Sergei Shtylyov
• Re: [PATCH 2/9] ide-disk: guarantee 400ns delay after writing command register
  • From: Sergei Shtylyov
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Albert Lee
• Re: new errors with sata_sil24 with port multiplier
  • From: Tejun Heo
• RE: new errors with sata_sil24 with port multiplier
  • From: Jon Chelton
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Tejun Heo
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Daniel Drake
• Re: Bart's efforts?
  • From: Mikael Pettersson
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: Suspend to ram regression (2.6.24-rc1-git)
  • From: Arjan van de Ven
• Re: Bart's efforts?
  • From: Alan Cox
• Re: Bart's efforts?
  • From: Alan Cox
• Re: Bart's efforts?
  • From: Felix Miata
• Re: Bart's efforts?
  • From: Mikael Pettersson
• Re: Bart's efforts?
  • From: Alan Cox
• Re: Bart's efforts?
  • From: Greg Freemyer
• Re: [PATCH 6/9] ide: remove 'handler' field from ide_task_t
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH]libata-acpi: add ACPI _PSx method
  • From: Jeff Garzik
• Re: Bart's efforts?
  • From: Jeff Garzik
• Re: [PATCH 1/6] libata: fix timing computation in ata_eh_reset()
  • From: Jeff Garzik
• Re: [PATCH] libata: increase 128 KB / cmd limit for ATAPI tape drives
  • From: Jeff Garzik
• Re: [PATCH 2.6.24-rc1] sata_promise: fix endianess bug in ASIC PRD bug workaround
  • From: Jeff Garzik
• Re: [2.6 patch] make ata_scsi_lpm_get() static
  • From: Jeff Garzik
• Re: [PATCH] libata: suppress two warnings
  • From: Jeff Garzik
• Re: [PATCH 01/12] ata/sata_fsl: Update for ata_link introduction
  • From: Jeff Garzik
• Bart's efforts?
  • From: Greg Freemyer
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Jeff Garzik
• Re: [PATCH 1/3] libata: implement dev->acpi_init_gtm
  • From: Jeff Garzik
• Re: new errors with sata_sil24 with port multiplier
  • From: Tejun Heo
• Re: [PATCH 1/3] libata: implement dev->acpi_init_gtm
  • From: Tejun Heo
• Re: [PATCH 2/3] libata: extend ata_acpi_cbl_80wire() and fix cable detection in pata_via and pata_amd
  • From: Tejun Heo
• Re: Suspend to ram regression (2.6.24-rc1-git)
  • From: Theodore Tso
• Re: [PATCH 2/3] libata: extend ata_acpi_cbl_80wire() and fix cable detection in pata_via and pata_amd
  • From: Alan Cox
• new errors with sata_sil24 with port multiplier
  • From: Jon Chelton
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Tejun Heo
• Re: [PATCH 2/3] libata: extend ata_acpi_cbl_80wire() and fix cable detection in pata_via and pata_amd
  • From: Tejun Heo
• Re: [PATCH 2/3] libata: extend ata_acpi_cbl_80wire() and fix cable detection in pata_via and pata_amd
  • From: Alan Cox
• Re: [PATCH 2/3] libata: extend ata_acpi_cbl_80wire() and fix cable detection in pata_via and pata_amd
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] libata: extend ata_acpi_cbl_80wire() and fix cable detection in pata_via and pata_amd
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] libata: extend ata_acpi_cbl_80wire() and fix cable detection in pata_via and pata_amd
  • From: Tejun Heo
• Re: [PATCH 3/3] pata_amd: fix and improve cable detection
  • From: Tejun Heo
• Re: [PATCH 3/3] pata_amd: fix and improve cable detection
  • From: Tejun Heo
• Re: [PATCH 3/3] pata_amd: fix and improve cable detection
  • From: Alan Cox
• Re: [Bug 9274] segfault after upgrade from 2.6.19.4 to 2.6.23.1
  • From: Martin Rogge
• Re: [PATCH 2/3] libata: extend ata_acpi_cbl_80wire() and fix cable detection in pata_via and pata_amd
  • From: Alan Cox
• Re: Suspend to ram regression (2.6.24-rc1-git)
  • From: Kristen Carlson Accardi
• Re: [PATCH 3/3] pata_amd: fix and improve cable detection
  • From: Tejun Heo
• Re: [PATCH 2/3] libata: extend ata_acpi_cbl_80wire() and fix cable detection in pata_via and pata_amd
  • From: Tejun Heo
• Re: [PATCH 1/3] libata: implement dev->acpi_init_gtm
  • From: Tejun Heo
• Re: [PATCH 1/3] libata: implement dev->acpi_init_gtm
  • From: Tejun Heo
• [PATCH 9/9] ide-disk: use do_rw_taskfile()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/9] ide-disk: add ide_tf_set_cmd() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/9] ide-disk: extend timeout for PIO-in commands
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/9] ide: remove 'handler' field from ide_task_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/9] ide: use ->data_phase to set ->handler in do_rw_taskfile()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/9] ide: convert do_rw_taskfile() to use ->data_phase
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/9] ide-disk: fix __ide_do_rw_disk() to use ->OUTBSYNC
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/9] ide: merge flagged_taskfile() into do_rw_taskfile()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/9] ide-disk: guarantee 400ns delay after writing command register
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 7/15] ide: remove atapi_ireason_t
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/15] ide: remove atapi_error_t
  • From: Bartlomiej Zolnierkiewicz
• Re: question on patch: ide: do_identify() string termination fix [PATCH 2.6.11-rc2 08/29]
  • From: Bartlomiej Zolnierkiewicz
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Daniel Drake
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Jeff Garzik
• Re: pata_serverworks hangs
  • From: Alan Cox
• Re: pata_serverworks hangs
  • From: Krzysztof Oledzki
• Re: pata_serverworks hangs
  • From: Alan Cox
• Re: [PATCH 1/3] libata: implement dev->acpi_init_gtm
  • From: Alan Cox
• Re: [PATCH 3/3] pata_amd: fix and improve cable detection
  • From: Alan Cox
• Re: [PATCH 2/3] libata: extend ata_acpi_cbl_80wire() and fix cable detection in pata_via and pata_amd
  • From: Alan Cox
• Re: [PATCH 1/3] libata: implement dev->acpi_init_gtm
  • From: Jeff Garzik
• [PATCH 3/3] pata_amd: fix and improve cable detection
  • From: Tejun Heo
• [PATCH 2/3] libata: extend ata_acpi_cbl_80wire() and fix cable detection in pata_via and pata_amd
  • From: Tejun Heo
• [PATCH 1/3] libata: implement dev->acpi_init_gtm
  • From: Tejun Heo
• Re: pata_serverworks hangs
  • From: Krzysztof Oledzki
• Re: pata_serverworks hangs
  • From: Jeff Garzik
• pata_serverworks hangs
  • From: Krzysztof Oledzki
• Re: [IDE] Fix build bug
  • From: Ralf Baechle
• Re: [smartmontools-support] Bug/Issue
  • From: Tejun Heo
• Re: [smartmontools-support] Bug/Issue
  • From: Tejun Heo
• Re: [PATCH]libata-acpi: add ACPI _PSx method
  • From: Rafael J. Wysocki
• Re: SATA_SIL
  • From: Tejun Heo
• Re: SATA_SIL
  • From: Frans de Boer
• Re: sata_nv: ata2 errors
  • From: Amit Shah
• Re: [PATCH] libata ATAPI transfer size cleanups
  • From: Jeff Garzik
• Re: [PATCH]libata-acpi: add ACPI _PSx method
  • From: Shaohua Li
• Re: SATA_SIL
  • From: Tejun Heo
• Re: Strange freezes (seems like SATA related)
  • From: Andrew Morton
• Re: sata_nv: ata2 errors
  • From: Jeff Garzik
• Re: sata_nv: ata2 errors
  • From: Andrew Morton
• Re: [PATCH] libata ATAPI transfer size cleanups
  • From: Torsten Kaiser
• Re: [PATCH 4/15] ide: remove atapi_error_t
  • From: Sergei Shtylyov
• Re: [IDE] Fix build bug
  • From: Denys Vlasenko
• Re: Suspend to ram regression (2.6.24-rc1-git)
  • From: Kristen Carlson Accardi
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Tejun Heo
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Tejun Heo
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Alan Cox
• [PATCH 8/8] libata: implement fast speed down for unverified data transfer mode
  • From: Tejun Heo
• [PATCH 7/8] libata: implement ATA_DFLAG_DUBIOUS_XFER
  • From: Tejun Heo
• [PATCH 5/8] libata: clean up EH speed down implementation
  • From: Tejun Heo
• [PATCH 6/8] libata: adjust speed down rules
  • From: Tejun Heo
• [PATCHSET] libata: update EH speed down logic
  • From: Tejun Heo
• [PATCH 4/8] libata: move ata_set_mode() to libata-eh.c
  • From: Tejun Heo
• [PATCH 1/8] libata: rearrange ATA_DFLAG_*
  • From: Tejun Heo
• [PATCH 2/8] libata: add protocol data transfer tests
  • From: Tejun Heo
• [PATCH 3/8] libata: factor out ata_eh_schedule_probe()
  • From: Tejun Heo
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Daniel Drake
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Alan Cox
• Re: Suspend to ram regression (2.6.24-rc1-git)
  • From: Jens Axboe
• Re: Suspend to ram regression (2.6.24-rc1-git)
  • From: Jeff Garzik
• Re: Suspend to ram regression (2.6.24-rc1-git)
  • From: Jens Axboe
• Re: Suspend to ram regression (2.6.24-rc1-git)
  • From: Jeff Garzik
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Jeff Garzik
• Re: [PATCH] libata ATAPI transfer size cleanups
  • From: Alan Cox
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Alan Cox
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Alan Cox
• Re: [PATCH]libata-acpi: add ACPI _PSx method
  • From: Alan Cox
• Re: [PATCH] libata ATAPI transfer size cleanups
  • From: Jeff Garzik
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Jeff Garzik
• Re: [PATCH] libata ATAPI transfer size cleanups
  • From: Alan Cox
• Re: Suspend to ram regression (2.6.24-rc1-git)
  • From: Jens Axboe
• Re: Suspend to ram regression (2.6.24-rc1-git)
  • From: Jens Axboe
• [PATCH] libata ATAPI transfer size cleanups
  • From: Jeff Garzik
• Re: Should be Acard ATP8620 2SATA / 1 IDE driver
  • From: jameshsu
• Re: Suspend to ram regression (2.6.24-rc1-git)
  • From: Jens Axboe
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Tejun Heo
• Re: [PATCH]libata-acpi: add ACPI _PSx method
  • From: Shaohua Li
• Re: ATAPI devices in AHCI mode not working
  • From: Tejun Heo
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Tejun Heo
• RE: ATAPI devices in AHCI mode not working
  • From: Gaston, Jason D
• Re: SATA_SIL
  • From: Tejun Heo
• Re: [PATCH 2/3] drivers/ide/pci/sc1200.c: remove pointless hwif lookup loop
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 13/15] ide: remove hwif->intrproc
  • From: Sergei Shtylyov
• Re: IDE Problem with old Gateway laptop (1998 solo 2300)
  • From: Vlad Codrea
• Update (Now a False Alarm) RE: Other Problems with Marvell Driver - 7042 (2.6.23)...
  • From: Morrison, Tom
• Re: IDE Problem with old Gateway laptop (1998 solo 2300)
  • From: Alan Cox
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Jens Axboe
• RE: ATAPI devices in AHCI mode not working
  • From: Gaston, Jason D
• Re: [PATCH 2/15] ide: CPU endianness doesn't matter for special_t
  • From: Sergei Shtylyov
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Daniel Drake
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Alan Cox
• Re: Other Problems with Marvell Driver - 7042 (2.6.23)...
  • From: Jeff Garzik
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Jeff Garzik
• Other Problems with Marvell Driver - 7042 (2.6.23)...
  • From: Morrison, Tom
• libata-core.c compile warnings with !CONFIG_PM
  • From: Gabriel C
• Re: [PATCH]libata-acpi: add ACPI _PSx method
  • From: Rafael J. Wysocki
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Jens Axboe
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Alan Cox
• Re: [PATCH] libata: increase 128 KB / cmd limit for ATAPI tape drives
  • From: Alan Cox
• [PATCH 2.6.24-rc1] sata_promise: fix endianess bug in ASIC PRD bug workaround
  • From: Mikael Pettersson
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Jeff Garzik
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Jens Axboe
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Alan Cox
• Re: IDE Problem with old Gateway laptop (1998 solo 2300)
  • From: Declan Moriarty
• [PATCH 12/12] ata/sata_fsl: Remove ata_scsi_suspend/resume callbacks
  • From: Li Yang
• [PATCH 11/12] ata/sata_fsl: Remove sending LOG EXT command in sata_fsl_softreset()
  • From: Li Yang
• [PATCH 10/12] ata/sata_fsl: Move MPC8315DS link speed limit workaround to specific ifdef
  • From: Li Yang
• [PATCH 09/12] ata/sata_fsl: cleanup style problem
  • From: Li Yang
• [PATCH 08/12] ata/sata_fsl: remove unneeded sata_fsl_hardreset()
  • From: Li Yang
• [PATCH 07/12] ata/sata_fsl: remove unneeded on-stack copy of FIS
  • From: Li Yang
• [PATCH 06/12] ata/sata_fsl: cleanup needless casts to/from void __iomem *
  • From: Li Yang
• [PATCH 05/12] ata/sata_fsl: Remove unnecessary SCR cases
  • From: Li Yang
• [PATCH 04/12] ata/sata_fsl: Kill ata_sg_is_last()
  • From: Li Yang
• [PATCH 03/12] ata/sata_fsl: save irq in private data for irq unmapping
  • From: Li Yang
• [PATCH 02/12] ata/sata_fsl: Remove deprecated hooks
  • From: Li Yang
• [PATCH 01/12] ata/sata_fsl: Update for ata_link introduction
  • From: Li Yang
• Re: [PATCH] "killing" sg_last(), and discussion
  • From: Boaz Harrosh
• Re: Slow hard drives
  • From: Alan Cox
• Re: [PATCH] "killing" sg_last(), and discussion
  • From: Jeff Garzik
• Re: [PATCH] "killing" sg_last(), and discussion
  • From: Boaz Harrosh
• Re: [git patches] libata fixes
  • From: Jeff Garzik
• Re: [git patches] libata fixes
  • From: Mikael Pettersson
• [PATCH] "killing" sg_last(), and discussion
  • From: Jeff Garzik
• Re: ATAPI devices in AHCI mode not working
  • From: Tejun Heo
• [PATCH] libata: suppress two warnings
  • From: Stephen Rothwell
• Re: [PATCH]libata-acpi: add ACPI _PSx method
  • From: Len Brown
• [PATCH 2/6] libata: cosmetic clean up / reorganization of ata_eh_reset()
  • From: Tejun Heo
• [PATCHSET] libata: update EH / configuration behavior
  • From: Tejun Heo
• [PATCH 4/6] libata: consider errors not associated with commands for speed down
  • From: Tejun Heo
• [PATCH 3/6] libata: more robust reset failure handling
  • From: Tejun Heo
• [PATCH 5/6] libata: request PHY speed configuration on SControl access failure
  • From: Tejun Heo
• [PATCH 6/6] libata: don't configure downstream links faster than the upstream link
  • From: Tejun Heo
• [PATCH 1/6] libata: fix timing computation in ata_eh_reset()
  • From: Tejun Heo
• Re: AHCI + ST3160023AS + NCQ problems
  • From: Matheus Izvekov
• Re: [PATCH #upstream 1/2] libata: relocate forcing PIO0 on reset
  • From: Tejun Heo
• Re: sata_nv and dynamically changing DMA mask?
  • From: Robert Hancock
• [PATCH 12/15] ide: remove SELECT_INTERRUPT()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/15] ide: remove hwif->intrproc
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/15] ide: remove 'tf_in_flags' field from ide_task_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/15] ide-cd: fix register loading order in cdrom_start_packet_command()
  • From: Bartlomiej Zolnierkiewicz
• [2.6 patch] make ata_scsi_lpm_get() static
  • From: Adrian Bunk
• [PATCH 14/15] ide: remove 'command_type' field from ide_task_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/15] ide: remove QUIRK_LIST()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 9/15] ide-{floppy,tape,scsi}: fix register loading order when issuing packet command
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/15] ide: add ide_pktcmd_tf_load() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/15] ide: remove atapi_ireason_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/15] ide: remove ata_nsector_t, ata_data_t and atapi_bcount_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/15] ide: remove atapi_feature_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/15] ide: remove atapi_error_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/15] ide: remove ata_status_t and atapi_status_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/15] ide: CPU endianness doesn't matter for special_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/15] ide-floppy: remove dead code
  • From: Bartlomiej Zolnierkiewicz
• AW: AW: Possible NCQ problem with Seagate ST3250620NS/nForce 4
  • From: Kuckuck Kuckuck
• Re: SATA_SIL
  • From: Greg Freemyer
• Re: [git patches] libata fixes
  • From: Junio C Hamano
• Slow hard drives
  • From: Ben Court
• Re: SATA_SIL
  • From: Alan Cox
• question on patch: ide: do_identify() string termination fix [PATCH 2.6.11-rc2 08/29]
  • From: Yanping Du
• SATA_SIL
  • From: Frans de Boer
• Re: [PATCH #upstream 1/2] libata: relocate forcing PIO0 on reset
  • From: Chuck Ebbert
• Re: IDE Problem with old Gateway laptop (1998 solo 2300)
  • From: Vlad Codrea
• Re: [IDE] Fix build bug
  • From: Bartlomiej Zolnierkiewicz
• Re: [git patches] libata fixes
  • From: Jan Engelhardt
• Re: AHCI + ST3160023AS + NCQ problems
  • From: Michael Tokarev
• Re: [git patches] libata fixes
  • From: Linus Torvalds
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Daniel Drake
• Re: [git patches] libata fixes
  • From: Jeff Garzik
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Alan Cox
• Re: [git patches] libata fixes
  • From: Linus Torvalds
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Frans Pop
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Daniel Drake
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Alan Cox
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Jeff Garzik
• "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Daniel Drake
• [PATCH] libata: increase 128 KB / cmd limit for ATAPI tape drives
  • From: Tony Battersby
• Re: "Fix ATAPI transfer lengths" causes CD writing regression
  • From: Alan Cox
• Re: [RFC 0/3] [SCSI/libata] libata EH conversion for ipr SAS
  • From: Jeff Garzik
• Re: [PATCH] libata: Deal with ATA8-ACS proposed Trusted/Treacherous Computing features
  • From: Jeff Garzik
• Re: [PATCH] libata/pata_it821x: Improve handling of poorly compatible emulations
  • From: Jeff Garzik
• Re: [PATCH 1/3] libata: flush is an IO command
  • From: Tejun Heo
• Re: [PATCH] libata/pata_it821x: Improve handling of poorly compatible emulations
  • From: Alan Cox
• Re: [PATCH] libata/pata_it821x: Improve handling of poorly compatible emulations
  • From: Jeff Garzik
• Re: [PATCH 1/3] libata: flush is an IO command
  • From: Jeff Garzik
• Re: [PATCH] libata/pata_it821x: Improve handling of poorly compatible emulations
  • From: Alan Cox
• Re: [PATCH] libata: Deal with ATA8-ACS proposed Trusted/Treacherous Computing features
  • From: Alan Cox
• Re: [PATCH 2.6.24-rc1 1/2] sata_promise: ASIC PRD table bug workaround, take 2
  • From: Jeff Garzik
• Re: [PATCH] libata: Deal with ATA8-ACS proposed Trusted/Treacherous Computing features
  • From: Jeff Garzik
• Re: [PATCH] libata/pata_it821x: Improve handling of poorly compatible emulations
  • From: Jeff Garzik
• [PATCH 2.6.24-rc1 2/2] sata_promise: cleanups
  • From: Mikael Pettersson
• [PATCH 2.6.24-rc1 1/2] sata_promise: ASIC PRD table bug workaround, take 2
  • From: Mikael Pettersson
• Re: AHCI + ST3160023AS + NCQ problems
  • From: Eric D. Mudama
• Re: IDE Problem with old Gateway laptop (1998 solo 2300)
  • From: Declan Moriarty
• Re: [IDE] Fix build bug
  • From: Ralf Baechle
• Re: [IDE] Fix build bug
  • From: Denys Vlasenko
• Re: blacklisting ST3500630AS as not able to do NCQ
  • From: Michael Tokarev
• Re: AHCI + ST3160023AS + NCQ problems
  • From: Michael Tokarev
• Re: Should be Acard ATP8620 2SATA / 1 IDE driver
  • From: Jeff Garzik
• Re: sata_nv and dynamically changing DMA mask?
  • From: Alan Cox
• Re: [PATCH 2.6.24-rc1] sata_promise: ASIC PRD table bug workaround
  • From: Alexander Sabourenkov
• Re: [PATCH 2.6.24-rc1] sata_promise: ASIC PRD table bug workaround
  • From: Mikael Pettersson
• Re: 2.6.24-rc1, sata_sil: access to SH-S183A broken again?
  • From: Harald Dunkel
• Re: [PATCH 2.6.24-rc1] sata_promise: ASIC PRD table bug workaround
  • From: Alexander Sabourenkov
• sata_nv and dynamically changing DMA mask?
  • From: Robert Hancock
• Re: PMP device port link speed issues
  • From: Tejun Heo
• AHCI + ST3160023AS + NCQ problems
  • From: Matheus Izvekov
• Re[2]: blacklisting ST3500630AS as not able to do NCQ
  • From: diego torres
• RE: ATAPI devices in AHCI mode not working
  • From: Gaston, Jason D
• Re: PMP device port link speed issues
  • From: Tejun Heo
• Re: ATAPI devices in AHCI mode not working
  • From: Alan Cox
• Re: [RFC/PATCH] libata and bogus LBA48 drives
  • From: Geert Uytterhoeven
• RE: ATAPI devices in AHCI mode not working
  • From: Gaston, Jason D
• Re: [RFC/PATCH] libata and bogus LBA48 drives
  • From: Jeff Garzik
• Re: ATAPI devices in AHCI mode not working
  • From: Alan Cox
• [RFC 3/3] ipr: Use new libata EH API
  • From: Brian King
• [RFC/PATCH] libata and bogus LBA48 drives
  • From: Geert Uytterhoeven
• [RFC 2/3] [SCSI/libata] libata EH conversion for ipr SAS
  • From: Brian King
• [RFC 1/3] [SCSI/libata] libata EH conversion for ipr SAS
  • From: Brian King
• [RFC 0/3] [SCSI/libata] libata EH conversion for ipr SAS
  • From: Brian King
• Re: [PATCH 2.6.24-rc1] sata_promise: ASIC PRD table bug workaround
  • From: Jeff Garzik
• [git patches 2/2] libata: add ALPM
  • From: Jeff Garzik
• [git patches 1/2] libata fixes
  • From: Jeff Garzik
• ATAPI devices in AHCI mode not working
  • From: Gaston, Jason D
• [PATCH 2.6.24-rc1] sata_promise: ASIC PRD table bug workaround
  • From: Mikael Pettersson
• RE: PMP device port link speed issues
  • From: Kalra Ashish-B00888
• Re: IDE Problem with old Gateway laptop (1998 solo 2300)
  • From: Alan Cox
• Re: [PATCH]ata: sata_nv fix mcp51 timeout with SWNCQ
  • From: Jeff Garzik
• Re: IDE Problem with old Gateway laptop (1998 solo 2300)
  • From: Declan Moriarty
• Re: [PATCH] libata: add MAXTOR 7V300F0/VA111900 to NCQ blacklist
  • From: Jeff Garzik
• Re: [PATCH #upstream 1/2] libata: relocate forcing PIO0 on reset
  • From: Jeff Garzik
• Re: 2.6.24-rc1, sata_sil: access to SH-S183A broken again?
  • From: Tejun Heo
• Re: 2.6.24-rc1, sata_sil: access to SH-S183A broken again?
  • From: Harri
• [PATCH] libata: add MAXTOR 7V300F0/VA111900 to NCQ blacklist
  • From: Tejun Heo
• Re: [PATCH #upstream 2/2] libata: no need to speed down if already at PIO0
  • From: Alan Cox
• [PATCH #upstream 2/2] libata: no need to speed down if already at PIO0
  • From: Tejun Heo
• [PATCH #upstream 1/2] libata: relocate forcing PIO0 on reset
  • From: Tejun Heo
• Re: blacklisting ST3500630AS as not able to do NCQ
  • From: Tejun Heo
• Re: [PATCH 5/5]: [PCI]: Remove 3 incorrect MSI quirks.
  • From: Tejun Heo
• Re: western digital WD1500ADFD: spurious completions during NCQ
  • From: Tejun Heo
• RE: [PATCH 5/5]: [PCI]: Remove 3 incorrect MSI quirks.
  • From: Shane Huang
• Re: [PATCH 3/3] sata_inic162x: finally, driver for initio 162x SATA controllers
  • From: Tejun Heo
• Re: Re-enabling Serial ATA ports possible?
  • From: Tejun Heo
• RE: [PATCH]ata: sata_nv fix mcp51 timeout with SWNCQ
  • From: Kuan Luo
• Re: 2.6.24-rc1, sata_sil: access to SH-S183A broken again?
  • From: Tejun Heo
• Re: [PATCH 5/5]: [PCI]: Remove 3 incorrect MSI quirks.
  • From: David Miller
• Re: [patch 3/4] scsi: expose AN support to user space
  • From: James Bottomley
• Re: [2.6.23-rc3] Regression: "spurious completions during NCQ"
  • From: Carsten Otto
• Re: IDE Problem with old Gateway laptop (1998 solo 2300)
  • From: Declan Moriarty
• Re: [PATCH 5/5]: [PCI]: Remove 3 incorrect MSI quirks.
  • From: David Gaarenstroom
• Re: [PATCH-RFC] Promise TX4 implement hw-bug workaround
  • From: Alexander Sabourenkov
• Re: [PATCH 5/15] ide: fix registers loading order for WIN_SMART in execute_drive_cmd()
  • From: Sergei Shtylyov
• Re: AW: Possible NCQ problem with Seagate ST3250620NS/nForce 4
  • From: Jens Prüfer
• Re: [PATCH-RFC] Promise TX4 implement hw-bug workaround
  • From: Mikael Pettersson
• 2.6.24-rc1, sata_sil: access to SH-S183A broken again?
  • From: Harri
• Re: [PATCH 3/3] sata_inic162x: finally, driver for initio 162x SATA controllers
  • From: Jo Lodewyckx
• Re: [PATCH-RFC] Promise TX4 implement hw-bug workaround
  • From: Jeff Garzik
• Re: [PATCH-RFC] Promise TX4 implement hw-bug workaround
  • From: Mikael Pettersson
• Re: [PATCH-RFC] Promise TX4 implement hw-bug workaround
  • From: Alexander Sabourenkov
• Re: [PATCH-RFC] Promise TX4 implement hw-bug workaround
  • From: Jeff Garzik
• Re: [PATCH-RFC] Promise SATA300 TX4
  • From: Jeff Garzik
• Re: [PATCH-RFC] Promise TX4 implement hw-bug workaround
  • From: Jeff Garzik
• Re: 2.6.24-rc1 IDE regression on PMAC?
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH-RFC] Promise TX4 implement hw-bug workaround
  • From: Alexander Sabourenkov
• Re: [PATCH-RFC] Promise TX4 implement hw-bug workaround
  • From: Alexander Sabourenkov
• Re: [PATCH-RFC] Promise TX4 implement hw-bug workaround
  • From: Alan Cox
• 2.6.24-rc1 IDE regression on PMAC?
  • From: Mikael Pettersson
• [PATCH 15/15] ide: remove REQ_TYPE_ATA_TASK
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/15] ide: extend timeout for REQ_TYPE_ATA_{CMD,TASK} requests
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/15] ide: switch ide_task_ioctl() to use REQ_TYPE_ATA_TASKFILE requests
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/15] ide: switch idedisk_prepare_flush() to use REQ_TYPE_ATA_TASKFILE requests
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/15] ide: remove unnecessary writes to HOB taskfile registers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/15] ide: use IDE_TFLAG_LBA48 for REQ_TYPE_ATA_TASKFILE requests
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 9/15] ide: use ide_tf_load() in execute_drive_cmd()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/15] ide: remove ide_cmd() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/15] ide: execute_drive_cmd() cleanup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/15] ide: fix registers loading order for IDE_NSECTOR_REG in execute_drive_cmd()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/15] ide: fix registers loading order for WIN_SMART in execute_drive_cmd()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/15] ide: use drive->select.all for REQ_TYPE_ATA_TASK in execute_drive_cmd()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/15] ide: add missing rq.ref_count initialization to ide_diag_taskfile()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/15] ide: clear HOB bit for REQ_TYPE_ATA_TASK requests in ide_end_drive_cmd()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/15] ide: check rq->cmd_type in drive_cmd_intr()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 8/9] ide: replace ide_pci_device_t by struct ide_port_info
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 8/9] ide: replace ide_pci_device_t by struct ide_port_info
  • From: Sergei Shtylyov
• Re: [PATCH] ide: remove stale ide.h "configuration options"
  • From: Sergei Shtylyov
• [PATCH] ide/Kconfig: fix BLK_DEV_OFFBOARD dependencies
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] unexport ide_fix_driveid
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH-RFC] Promise SATA300 TX4
  • From: Alexander Sabourenkov
• Re: [2.6 patch] unexport ide_fix_driveid
  • From: Alan Cox
• [PATCH-RFC] Promise TX4 implement hw-bug workaround
  • From: Alexander Sabourenkov
• Re: [PATCH-RFC]
  • From: Alexander Sabourenkov
• Re: [PATCH-RFC] (was: Re: Sata Sil3512 bug?; Promise SATA300 TX4)
  • From: Mikael Pettersson
• [2.6 patch] unexport ide_fix_driveid
  • From: Adrian Bunk
• Re[2]: [PATCH-RFC]
  • From: MisterE
• Re: [PATCH-RFC]
  • From: Alexander Sabourenkov
• [PATCH-RFC] (was: Re: Sata Sil3512 bug?; Promise SATA300 TX4)
  • From: Alexander Sabourenkov
• 2.6.24-rc1-gec3b67c1 broken reg. libata-sata_nv in non NCQ mode
  • From: Prakash Punnoor
• Re: seagate disks on sil3114 - slow?
  • From: Soeren Sonnenburg
• Re: [PATCH] ide: remove stale ide.h "configuration options"
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: remove stale ide.h "configuration options"
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-tape: remove dead USE_IOTRACE code
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: add IDEDISK_MULTI_MODE text adapted from hdparm manual page
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.24-rc1: pata_acpi fails to activate DMA for DVD-ROM on ALi M5229 secondary channel
  • From: Alan Cox
• Re: [PATCH]ata: sata_nv fix mcp51 timeout with SWNCQ
  • From: Bartlomiej Zolnierkiewicz
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: Regression: commit "ide: constify struct ide_port_info" causes breakage
  • From: Bartlomiej Zolnierkiewicz
• 2.6.24-rc1: pata_acpi fails to activate DMA for DVD-ROM on ALi M5229 secondary channel
  • From: Andrey Borzenkov
• Re: Regression: commit "ide: constify struct ide_port_info" causes breakage
  • From: Arjan van de Ven
• [PATCH] ide: add IDEDISK_MULTI_MODE text adapted from hdparm manual page
  • From: Matti Linnanvuori
• Re: Regression: commit "ide: constify struct ide_port_info" causes breakage
  • From: Sergei Shtylyov
• Re: Regression: commit "ide: constify struct ide_port_info" causes breakage
  • From: Linus Torvalds
• Re: Regression: commit "ide: constify struct ide_port_info" causes breakage
  • From: Linus Torvalds
• Re: Regression: commit "ide: constify struct ide_port_info" causes breakage
  • From: Sergei Shtylyov
• Regression: commit "ide: constify struct ide_port_info" causes breakage
  • From: Russell King
• Re: Fwd: CMD 64x regression from 2.6.21 to 2.6.22 and 2.6.23?
  • From: Sergei Shtylyov
• RE: 2.6.24-rc1, sata_nv: MCP51 is boned with SWNCQ too
  • From: Andrew
• Re: Re-enabling Serial ATA ports possible?
  • From: Marcin Juszkiewicz
• Re: marvell 88SX6081 and linux 2.6.23.1
  • From: jeffunit
• Re: [PATCH 2/3] ide: fix drive_is_ready() for non-PCI hosts and CONFIG_IDEPCI_SHARE_IRQ=y
  • From: Alan Cox
• Re: [PATCH 5/5]: [PCI]: Remove 3 incorrect MSI quirks.
  • From: David Miller
• Re: [PATCH 5/5]: [PCI]: Remove 3 incorrect MSI quirks.
  • From: David Gaarenstroom
• Re: IDE Problem with old Gateway laptop (1998 solo 2300)
  • From: Declan Moriarty
• Re: Re-enabling Serial ATA ports possible?
  • From: Tejun Heo
• Re: Re-enabling Serial ATA ports possible?
  • From: Marcin Juszkiewicz
• [PATCH]ata: sata_nv fix mcp51 timeout with SWNCQ
  • From: Kuan Luo
• [PATCH 3/3] libata: implement and use ATA_QCFLAG_QUIET
  • From: Tejun Heo
• [PATCH 2/3] libata: stop being overjealous about non-IO commands
  • From: Tejun Heo
• [PATCH 1/3] libata: flush is an IO command
  • From: Tejun Heo
• Re: seagate disks on sil3114 - slow?
  • From: Tejun Heo
• Re: seagate disks on sil3114 - slow?
  • From: Soeren Sonnenburg
• RE: 2.6.24-rc1, sata_nv: MCP51 is boned with SWNCQ too
  • From: Kuan Luo
• Re: marvell 88SX6081 and linux 2.6.23.1
  • From: Tejun Heo
• Re: [stable] [PATCH 1/2] libata: backport ATA_FLAG_NO_SRST and ATA_FLAG_ASSUME_ATA
  • From: Greg KH
• Re: marvell 88SX6081 and linux 2.6.23.1
  • From: jeffunit
• Re: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
  • From: Jim Paris
• Re: marvell 88SX6081 and linux 2.6.23.1
  • From: Tejun Heo
• Re: marvell 88SX6081 and linux 2.6.23.1
  • From: jeffunit
• Re: [git patches] libata update
  • From: Tejun Heo
• Re: Questions about SATA hotplug in linux 2.6
  • From: Tejun Heo
• Re: PMP device port link speed issues
  • From: Tejun Heo
• Re: Questions about SATA hotplug in linux 2.6
  • From: Jeff Garzik
• Re: seagate disks on sil3114 - slow?
  • From: Tejun Heo
• Questions about SATA hotplug in linux 2.6
  • From: Shane Huang
• Re: Re-enabling Serial ATA ports possible?
  • From: Tejun Heo
• Re: ata_piix: ICH7 "invalid MAP value 0" msg at boot
  • From: Tejun Heo
• Re: marvell 88SX6081 and linux 2.6.23.1
  • From: Tejun Heo
• Re: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
  • From: Tejun Heo
• Re: [PATCH 2/3] drivers/ide/pci/sc1200.c: remove pointless hwif lookup loop
  • From: Jeff Garzik
• Re: [PATCH 2/3] ide: fix drive_is_ready() for non-PCI hosts and CONFIG_IDEPCI_SHARE_IRQ=y
  • From: Jeff Garzik
• Re: [PATCH 2/3] ide: fix drive_is_ready() for non-PCI hosts and CONFIG_IDEPCI_SHARE_IRQ=y
  • From: Alan Cox
• Re: [PATCH 2/3] ide: fix drive_is_ready() for non-PCI hosts and CONFIG_IDEPCI_SHARE_IRQ=y
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] ide: fix drive_is_ready() for non-PCI hosts and CONFIG_IDEPCI_SHARE_IRQ=y
  • From: Alan Cox
• Re: [PATCH] Add a global ide=off switch for drivers/ide
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] cleanup after APUS removal
  • From: Geert Uytterhoeven
• [PATCH 3/3] ide: remove CONFIG_IDEPCI_SHARE_IRQ config option
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/3] ide: fix drive_is_ready() for non-PCI hosts and CONFIG_IDEPCI_SHARE_IRQ=y
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/3] ide: remove IRQF_DISABLED from IRQ flags for IDE IRQ handler
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: fix Kconfig IDEPCI_SHARE_IRQ and IDEDISK_MULTI_MODE
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: ahci: Enable enclosure management via LED (resend)
  • From: Ingo Oeser
• Re: [PATCH] Add a global ide=off switch for drivers/ide
  • From: Andi Kleen
• Re: [PATCH] libata/pata_it821x: Improve handling of poorly compatible emulations
  • From: Alan Cox
• Re: [PATCH 0/4]: Resolve MSI vs. INTX_DISABLE quirks, V2.
  • From: David Miller
• Re: [PATCH] ata: ahci: Enable enclosure management via LED (resend)
  • From: Richard Purdie
• Re: [PATCH] ata: ahci: Enable enclosure management via LED (resend)
  • From: Kristen Carlson Accardi
• Re: [IDE] Fix build bug
  • From: Bartlomiej Zolnierkiewicz
• Re: [IDE] Fix build bug
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata: ahci: Enable enclosure management via LED (resend)
  • From: Ingo Oeser
• Re: [PATCH] Add a global ide=off switch for drivers/ide
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.24-rc1, sata_nv: MCP51 is boned with SWNCQ too
  • From: Andrew
• Re: [PATCH] libata/pata_it821x: Improve handling of poorly compatible emulations
  • From: Andrew Morton
• Re: [PATCH 3/3] drivers/ide/pci/sc1200.c: fix suspend/resume buglets and warnings
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] drivers/ide/pci/sc1200.c: remove pointless hwif lookup loop
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/3] [IDE] Add helper __ide_setup_pci_device()
  • From: Bartlomiej Zolnierkiewicz
• Re: Warnings on shutdown (Debian Etch and Kernel 2.6.22.9)
  • From: Jim Paris
• Re: [PATCH 0/4]: Resolve MSI vs. INTX_DISABLE quirks, V2.
  • From: Greg KH
• Re: [PATCH 7/12] ide-disk: merge LBA28 and LBA48 Host Protected Area support code
  • From: Sergei Shtylyov
• Re: [IDE] Fix build bug
  • From: Maciej W. Rozycki
• Re: [PATCH 6/12] ide: add struct ide_taskfile
  • From: Sergei Shtylyov
• Re: [IDE] Fix build bug
  • From: Ralf Baechle
• Re: [PATCH 12/15] ide: remove ->dma_master field from ide_hwif_t
  • From: Sergei Shtylyov
• Re: [IDE] Fix build bug
  • From: Maciej W. Rozycki
• Re: [IDE] Fix build bug
  • From: Ralf Baechle
• Re: [IDE] Fix build bug
  • From: Sam Ravnborg
• Re: 2.6.24-rc1, sata_nv: MCP51 is boned with SWNCQ too
  • From: Bartlomiej Zolnierkiewicz
• [IDE] Fix build bug
  • From: Ralf Baechle
• [PATCH] libata/pata_it821x: Improve handling of poorly compatible emulations
  • From: Alan Cox
• Re: [PATCH] libata: Deal with ATA8-ACS proposed Trusted/Treacherous Computing features
  • From: Alan Cox
• Re: 2.6.24-rc1, sata_nv: MCP51 is boned with SWNCQ too
  • From: Jeff Garzik
• Re: 2.6.24-rc1, sata_nv: MCP51 is boned with SWNCQ too
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.24-rc1, sata_nv: MCP51 is boned with SWNCQ too
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.24-rc1, sata_nv: MCP51 is boned with SWNCQ too
  • From: Andrew
• Re: Warnings on shutdown (Debian Etch and Kernel 2.6.22.9)
  • From: Renato S. Yamane
• Re: 2.6.24-rc1, sata_nv: MCP51 is boned with SWNCQ too
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.24-rc1, sata_nv: MCP51 is boned with SWNCQ too
  • From: Andrew Nelless
• Re: 2.6.24-rc1, sata_nv: MCP51 is boned with SWNCQ too
  • From: Jeff Garzik
• 2.6.24-rc1, sata_nv: MCP51 is boned with SWNCQ too
  • From: Andrew
• Re: PMP device port link speed issues
  • From: Jeff Garzik
• PMP device port link speed issues
  • From: Kalra Ashish-B00888
• Re: [patch 2/4] libata: implement ata_wait_after_reset()
  • From: Jeff Garzik
• Re: What's left in libata-dev.git?
  • From: Jeff Garzik
• Re: What's left in libata-dev.git?
  • From: Tejun Heo
• Re: What's left in libata-dev.git?
  • From: Jeff Garzik
• What's left in libata-dev.git?
  • From: Jeff Garzik
• Re: [PATCH #upstream] libata: relocate and fix post-command processing
  • From: Tejun Heo
• Re: [PATCH #upstream] libata: track SLEEP state and issue SRST to wake it up
  • From: Jeff Garzik
• Re: [PATCH #upstream] libata: relocate and fix post-command processing
  • From: Jeff Garzik
• [PATCH #upstream] libata: track SLEEP state and issue SRST to wake it up
  • From: Tejun Heo
• [PATCH #upstream] libata: relocate and fix post-command processing
  • From: Tejun Heo
• Re: [PATCH] libata: Deal with ATA8-ACS proposed Trusted/Treacherous Computing features
  • From: Jeff Garzik
• Re: [PATCH 0/5]: Resolve MSI vs. INTX_DISABLE quirks, V2.
  • From: Jeff Garzik
• Re: [PATCH] ata: ahci: Enable enclosure management via LED (resend)
  • From: David Härdeman
• [PATCH 5/5]: [PCI]: Remove 3 incorrect MSI quirks.
  • From: David Miller
• [PATCH 4/5]: [PCI]: Add MSI INTX_DISABLE quirks for ATI SB700/800 SATA and IXP SB400 USB
  • From: David Miller
• [PATCH 3/5]: [PCI]: Add quirk for devices which disable MSI when INTX_DISABLE is set.
  • From: David Miller
• [PATCH 2/5]: [PCI]: Add MSI quirk for ServerWorks HT1000 PCIX bridge.
  • From: David Miller
• [PATCH 1/5]: Revert "PCI: disable MSI by default on systems with Serverworks HT1000 chips"
  • From: David Miller
• [PATCH 0/4]: Resolve MSI vs. INTX_DISABLE quirks, V2.
  • From: David Miller
• Re: [PATCH 4/4]: [PCI]: Add MSI INTX_DISABLE quirks for ATI SB700/800 SATA and IXP SB400 USB
  • From: David Miller
• [git patches] libata updates
  • From: Jeff Garzik
• Re: [PATCH 1/2] libata: backport ATA_FLAG_NO_SRST and ATA_FLAG_ASSUME_ATA
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: backport ATA_FLAG_NO_SRST and ATA_FLAG_ASSUME_ATA
  • From: Jeff Garzik
• Re: [patch 4/4] libata: expose AN to user space
  • From: Jeff Garzik
• Re: [patch 3/4] scsi: expose AN support to user space
  • From: Jeff Garzik
• [PATCH 2/2 -stable] libata: backport ATA_FLAG_NO_SRST and ATA_FLAG_ASSUME_ATA
  • From: Tejun Heo
• [PATCH 1/2] libata: backport ATA_FLAG_NO_SRST and ATA_FLAG_ASSUME_ATA
  • From: Tejun Heo
• Re: [PATCH] ata: sata_nv MCP61 using GENERIC instead of SWNCQ
  • From: Jeff Garzik
• Re: [PATCH] ahci: ahci: implement workaround for ASUS P5W-DH Deluxe ahci_broken_hardreset(), take #2
  • From: Tejun Heo
• Re: [PATCH] libata-core: Be a bit more relaxed about early DMA zero devices
  • From: Jeff Garzik
• Re: [PATCH] ahci: ahci: implement workaround for ASUS P5W-DH Deluxe ahci_broken_hardreset(), take #2
  • From: Jeff Garzik
• Re: [git patches] IDE updates (part 2)
  • From: Jeff Garzik
• Re: [PATCH] libata-core: Don't have screaming fits over DF/ERR combinations
  • From: Jeff Garzik
• RE: [PATCH] ata: sata_nv MCP61 using GENERIC instead of SWNCQ
  • From: Kuan Luo
• Re: [PATCH] libata: cosmetic clean up in ata_eh_reset()
  • From: Jeff Garzik
• Re: [2.6 patch] libata-core.c: make 2 functions static
  • From: Jeff Garzik
• [PATCH] ahci: ahci: implement workaround for ASUS P5W-DH Deluxe ahci_broken_hardreset(), take #2
  • From: Tejun Heo
• Re: [PATCH] ata: ahci: Enable enclosure management via LED (resend)
  • From: Jeff Garzik
• Re: [PATCH 0/4]: Resolve MSI vs. INTX_DISABLE quirks.
  • From: Jeff Garzik
• Re: [patch 2/2] Enable Aggressive Link Power management for AHCI controllers.
  • From: Jeff Garzik
• Re: [PATCH] ata: sata_nv MCP61 using GENERIC instead of SWNCQ
  • From: Jeff Garzik
• Re: [patch 1/2] Enable link power management for ata drivers
  • From: Jeff Garzik
• Re: [PATCH 2/2] ahci: implement workaround for ASUS P5W-DH Deluxe ahci_broken_hardreset()
  • From: Tejun Heo
• [PATCH 2/2] ahci: implement workaround for ASUS P5W-DH Deluxe ahci_broken_hardreset()
  • From: Tejun Heo
• [PATCH 1/2] ahci: rename ahci_vt8251_hardreset() to ahci_broken_hardreset()
  • From: Tejun Heo
• [PATCH 3/3] drivers/ide/pci/sc1200.c: fix suspend/resume buglets and warnings
  • From: Jeff Garzik
• [PATCH 2/3] drivers/ide/pci/sc1200.c: remove pointless hwif lookup loop
  • From: Jeff Garzik
• [PATCH 1/3] [IDE] Add helper __ide_setup_pci_device()
  • From: Jeff Garzik
• Re: [PATCH 7/12] ide-disk: merge LBA28 and LBA48 Host Protected Area support code
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 6/12] ide: add struct ide_taskfile
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 5/12] ide: remove task_ioreg_t typedef
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 12/15] ide: remove ->dma_master field from ide_hwif_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ata: ahci: Enable enclosure management via LED (resend)
  • From: Kristen Carlson Accardi
• [SOLVED - Could be a bug though] AW: Raid autodetect problem, boot fails if root=/dev/md1 DG965RY
  • From: Kuckuck Kuckuck
• Re: New CD/DVD drive - 80-wire cable detection failure
  • From: Alan Cox
• AW: Possible NCQ problem with Seagate ST3250620NS/nForce 4
  • From: Kuckuck Kuckuck
• Re: [PATCH 12/12] ide: use do_rw_taskfile() in flagged_taskfile()
  • From: Sergei Shtylyov
• Possible NCQ problem with Seagate ST3250620NS/nForce 4
  • From: Jens Prüfer
• Re: [PATCH 11/15] ide: PCI BMDMA initialization fixes
  • From: Sergei Shtylyov
• Re: New CD/DVD drive - 80-wire cable detection failure
  • From: Nick Warne
• Re: [PATCH 0/4]: Resolve MSI vs. INTX_DISABLE quirks.
  • From: Daniel Barkalow
• 2.6.24-rc1 : compile failure with CONFIG_HOTPLUG=n
  • From: Martijn Uffing
• [2.6 patch] cleanup after APUS removal
  • From: Adrian Bunk
• [2.6 patch] libata-core.c: make 2 functions static
  • From: Adrian Bunk