Finding out matching transfer mode from ACPI GTM values is useful for
other purposes too. Separate out the function and timing tables from
pata_acpi::pacpi_discover_modes().
Other than checking shared-configuration bit after doing
ata_acpi_gtm() in pacpi_discover_modes() which should be safe, this
patch doesn't introduce any behavior change.
Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
---
drivers/ata/libata-acpi.c | 78 +++++++++++++++++++++++++++++++++++++++++++++
drivers/ata/pata_acpi.c | 66 ++++++-------------------------------
include/linux/libata.h | 25 ++++++++++++++
3 files changed, 114 insertions(+), 55 deletions(-)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 08a52dd..5ffa542 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -424,6 +424,84 @@ int ata_acpi_cbl_80wire(struct ata_port *ap)
EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire);
+/* Welcome to ACPI, bring a bucket */
+const unsigned int ata_acpi_pio_cycle[7] = {
+ 600, 383, 240, 180, 120, 100, 80
+};
+EXPORT_SYMBOL_GPL(ata_acpi_pio_cycle);
+
+const unsigned int ata_acpi_mwdma_cycle[5] = {
+ 480, 150, 120, 100, 80
+};
+EXPORT_SYMBOL_GPL(ata_acpi_mwdma_cycle);
+
+const unsigned int ata_acpi_udma_cycle[7] = {
+ 120, 80, 60, 45, 30, 20, 15
+};
+EXPORT_SYMBOL_GPL(ata_acpi_udma_cycle);
+
+/**
+ * ata_acpi_gtm_xfermode - determine xfermode from GTM parameter
+ * @dev: target device
+ * @gtm: GTM parameter to use
+ *
+ * Determine xfermask for @dev from @gtm.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * Determined xfermask.
+ */
+unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev,
+ const struct ata_acpi_gtm *gtm)
+{
+ int unit, i;
+ u32 t;
+ unsigned long mask = (0x7f << ATA_SHIFT_UDMA) | (0x7 << ATA_SHIFT_MWDMA) | (0x1F << ATA_SHIFT_PIO);
+
+ /* we always use the 0 slot for crap hardware */
+ unit = dev->devno;
+ if (!(gtm->flags & 0x10))
+ unit = 0;
+
+ /* start by scanning for PIO modes */
+ for (i = 0; i < 7; i++) {
+ t = gtm->drive[unit].pio;
+ if (t <= ata_acpi_pio_cycle[i]) {
+ mask |= (2 << (ATA_SHIFT_PIO + i)) - 1;
+ break;
+ }
+ }
+
+ /* See if we have MWDMA or UDMA data. We don't bother with
+ * MWDMA if UDMA is available as this means the BIOS set UDMA
+ * and our error changedown if it works is UDMA to PIO anyway.
+ */
+ if (gtm->flags & (1 << (2 * unit))) {
+ /* MWDMA */
+ for (i = 0; i < 5; i++) {
+ t = gtm->drive[unit].dma;
+ if (t <= ata_acpi_mwdma_cycle[i]) {
+ mask |= (2 << (ATA_SHIFT_MWDMA + i)) - 1;
+ break;
+ }
+ }
+ } else {
+ /* UDMA */
+ for (i = 0; i < 7; i++) {
+ t = gtm->drive[unit].dma;
+ if (t <= ata_acpi_udma_cycle[i]) {
+ mask |= (2 << (ATA_SHIFT_UDMA + i)) - 1;
+ break;
+ }
+ }
+ }
+
+ return mask;
+}
+EXPORT_SYMBOL_GPL(ata_acpi_gtm_xfermask);
+
/**
* taskfile_load_raw - send taskfile registers to host controller
* @dev: target ATA device
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 2323646..fc6e3a5 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -81,17 +81,6 @@ static void pacpi_error_handler(struct ata_port *ap)
NULL, ata_std_postreset);
}
-/* Welcome to ACPI, bring a bucket */
-static const unsigned int pio_cycle[7] = {
- 600, 383, 240, 180, 120, 100, 80
-};
-static const unsigned int mwdma_cycle[5] = {
- 480, 150, 120, 100, 80
-};
-static const unsigned int udma_cycle[7] = {
- 120, 80, 60, 45, 30, 20, 15
-};
-
/**
* pacpi_discover_modes - filter non ACPI modes
* @adev: ATA device
@@ -103,56 +92,20 @@ static const unsigned int udma_cycle[7] = {
static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device *adev)
{
- int unit = adev->devno;
struct pata_acpi *acpi = ap->private_data;
- int i;
- u32 t;
- unsigned long mask = (0x7f << ATA_SHIFT_UDMA) | (0x7 << ATA_SHIFT_MWDMA) | (0x1F << ATA_SHIFT_PIO);
-
struct ata_acpi_gtm probe;
+ unsigned int xfer_mask;
probe = acpi->gtm;
- /* We always use the 0 slot for crap hardware */
- if (!(probe.flags & 0x10))
- unit = 0;
-
ata_acpi_gtm(ap, &probe);
- /* Start by scanning for PIO modes */
- for (i = 0; i < 7; i++) {
- t = probe.drive[unit].pio;
- if (t <= pio_cycle[i]) {
- mask |= (2 << (ATA_SHIFT_PIO + i)) - 1;
- break;
- }
- }
+ xfer_mask = ata_acpi_gtm_xfermask(adev, &probe);
- /* See if we have MWDMA or UDMA data. We don't bother with MWDMA
- if UDMA is availabe as this means the BIOS set UDMA and our
- error changedown if it works is UDMA to PIO anyway */
- if (probe.flags & (1 << (2 * unit))) {
- /* MWDMA */
- for (i = 0; i < 5; i++) {
- t = probe.drive[unit].dma;
- if (t <= mwdma_cycle[i]) {
- mask |= (2 << (ATA_SHIFT_MWDMA + i)) - 1;
- break;
- }
- }
- } else {
- /* UDMA */
- for (i = 0; i < 7; i++) {
- t = probe.drive[unit].dma;
- if (t <= udma_cycle[i]) {
- mask |= (2 << (ATA_SHIFT_UDMA + i)) - 1;
- break;
- }
- }
- }
- if (mask & (0xF8 << ATA_SHIFT_UDMA))
+ if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
ap->cbl = ATA_CBL_PATA80;
- return mask;
+
+ return xfer_mask;
}
/**
@@ -185,7 +138,8 @@ static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev)
unit = 0;
/* Now stuff the nS values into the structure */
- acpi->gtm.drive[unit].pio = pio_cycle[adev->pio_mode - XFER_PIO_0];
+ acpi->gtm.drive[unit].pio =
+ ata_acpi_pio_cycle[adev->pio_mode - XFER_PIO_0];
ata_acpi_stm(ap, &acpi->gtm);
/* See what mode we actually got */
ata_acpi_gtm(ap, &acpi->gtm);
@@ -207,10 +161,12 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
/* Now stuff the nS values into the structure */
if (adev->dma_mode >= XFER_UDMA_0) {
- acpi->gtm.drive[unit].dma = udma_cycle[adev->dma_mode - XFER_UDMA_0];
+ acpi->gtm.drive[unit].dma =
+ ata_acpi_udma_cycle[adev->dma_mode - XFER_UDMA_0];
acpi->gtm.flags |= (1 << (2 * unit));
} else {
- acpi->gtm.drive[unit].dma = mwdma_cycle[adev->dma_mode - XFER_MW_DMA_0];
+ acpi->gtm.drive[unit].dma =
+ ata_acpi_mwdma_cycle[adev->dma_mode - XFER_MW_DMA_0];
acpi->gtm.flags &= ~(1 << (2 * unit));
}
ata_acpi_stm(ap, &acpi->gtm);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 80c711a..e626137 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -955,11 +955,36 @@ enum {
/* libata-acpi.c */
#ifdef CONFIG_ATA_ACPI
+extern const unsigned int ata_acpi_pio_cycle[7];
+extern const unsigned int ata_acpi_mwdma_cycle[5];
+extern const unsigned int ata_acpi_udma_cycle[7];
+
extern int ata_acpi_cbl_80wire(struct ata_port *ap);
int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm);
int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *stm);
+unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev,
+ const struct ata_acpi_gtm *gtm);
+
#else
static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; }
+
+static inline int ata_acpi_stm(const struct ata_port *ap,
+ struct ata_acpi_gtm *stm)
+{
+ return -ENOSYS;
+}
+
+static inline int ata_acpi_gtm(const struct ata_port *ap,
+ struct ata_acpi_gtm *stm)
+{
+ return -ENOSYS;
+}
+
+static inline unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev,
+ const struct ata_acpi_gtm *gtm)
+{
+ return 0;
+}
#endif
#ifdef CONFIG_PCI
--
1.5.2.4
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
