After the APUS removal, some code can be removed. Signed-off-by: Adrian Bunk <bunk@xxxxxxxxxx> --- arch/m68k/amiga/chipram.c | 2 drivers/ide/ide-probe.c | 8 +-- drivers/isdn/hisax/avm_pci.c | 8 --- drivers/scsi/a2091.c | 3 - drivers/scsi/a3000.c | 3 - drivers/scsi/gvp11.c | 3 - drivers/scsi/oktagon_esp.c | 2 drivers/scsi/oktagon_io.S | 72 ---------------------------- drivers/video/console/fbcon.c | 2 drivers/video/console/fonts.c | 4 - include/asm-m68k/pgtable.h | 2 sound/oss/dmasound/Kconfig | 2 sound/oss/dmasound/dmasound_paula.c | 4 - 13 files changed, 12 insertions(+), 103 deletions(-) 557134975b5c1098cd42a6295670723ecfb35b57 diff --git a/arch/m68k/amiga/chipram.c b/arch/m68k/amiga/chipram.c index fa015d8..75d4626 100644 --- a/arch/m68k/amiga/chipram.c +++ b/arch/m68k/amiga/chipram.c @@ -29,12 +29,10 @@ void __init amiga_chip_init(void) if (!AMIGAHW_PRESENT(CHIP_RAM)) return; -#ifndef CONFIG_APUS_FAST_EXCEPT /* * Remove the first 4 pages where PPC exception handlers will be located */ amiga_chip_size -= 0x4000; -#endif chipram_res.end = amiga_chip_size-1; request_resource(&iomem_resource, &chipram_res); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 6a6f2e0..1664e2d 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1062,9 +1062,9 @@ static int init_irq (ide_hwif_t *hwif) */ if (!match || match->irq != hwif->irq) { int sa = IRQF_DISABLED; -#if defined(__mc68000__) || defined(CONFIG_APUS) +#if defined(__mc68000__) sa = IRQF_SHARED; -#endif /* __mc68000__ || CONFIG_APUS */ +#endif /* __mc68000__ */ if (IDE_CHIPSET_IS_PCI(hwif->chipset)) { sa = IRQF_SHARED; @@ -1107,7 +1107,7 @@ static int init_irq (ide_hwif_t *hwif) spin_unlock_irq(&ide_lock); } -#if !defined(__mc68000__) && !defined(CONFIG_APUS) +#if !defined(__mc68000__) printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name, hwif->io_ports[IDE_DATA_OFFSET], hwif->io_ports[IDE_DATA_OFFSET]+7, @@ -1115,7 +1115,7 @@ static int init_irq (ide_hwif_t *hwif) #else printk("%s at 0x%08lx on irq %d", hwif->name, hwif->io_ports[IDE_DATA_OFFSET], hwif->irq); -#endif /* __mc68000__ && CONFIG_APUS */ +#endif /* __mc68000__ */ if (match) printk(" (%sed with %s)", hwif->sharing_irq ? "shar" : "serializ", match->name); diff --git a/drivers/isdn/hisax/avm_pci.c b/drivers/isdn/hisax/avm_pci.c index f8b7978..be55a26 100644 --- a/drivers/isdn/hisax/avm_pci.c +++ b/drivers/isdn/hisax/avm_pci.c @@ -263,11 +263,7 @@ hdlc_empty_fifo(struct BCState *bcs, int count) outl(idx, cs->hw.avm.cfg_reg + 4); while (cnt < count) { #ifdef __powerpc__ -#ifdef CONFIG_APUS - *ptr++ = in_le32((unsigned *)(cs->hw.avm.isac +_IO_BASE)); -#else *ptr++ = in_be32((unsigned *)(cs->hw.avm.isac +_IO_BASE)); -#endif /* CONFIG_APUS */ #else *ptr++ = inl(cs->hw.avm.isac); #endif /* __powerpc__ */ @@ -328,11 +324,7 @@ hdlc_fill_fifo(struct BCState *bcs) if (cs->subtyp == AVM_FRITZ_PCI) { while (cnt<count) { #ifdef __powerpc__ -#ifdef CONFIG_APUS - out_le32((unsigned *)(cs->hw.avm.isac +_IO_BASE), *ptr++); -#else out_be32((unsigned *)(cs->hw.avm.isac +_IO_BASE), *ptr++); -#endif /* CONFIG_APUS */ #else outl(*ptr++, cs->hw.avm.isac); #endif /* __powerpc__ */ diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c index b7c5385..0d4c593 100644 --- a/drivers/scsi/a2091.c +++ b/drivers/scsi/a2091.c @@ -46,8 +46,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) struct Scsi_Host *instance = cmd->device->host; /* don't allow DMA if the physical address is bad */ - if (addr & A2091_XFER_MASK || - (!dir_in && mm_end_of_chunk (addr, cmd->SCp.this_residual))) + if (addr & A2091_XFER_MASK) { HDATA(instance)->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff; diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c index 796f1c4..b3a6c58 100644 --- a/drivers/scsi/a3000.c +++ b/drivers/scsi/a3000.c @@ -54,8 +54,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) * end of a physical memory chunk, then allocate a bounce * buffer */ - if (addr & A3000_XFER_MASK || - (!dir_in && mm_end_of_chunk (addr, cmd->SCp.this_residual))) + if (addr & A3000_XFER_MASK) { HDATA(a3000_host)->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff; diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c index 37741e9..91f8522 100644 --- a/drivers/scsi/gvp11.c +++ b/drivers/scsi/gvp11.c @@ -54,8 +54,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) static int scsi_alloc_out_of_range = 0; /* use bounce buffer if the physical address is bad */ - if (addr & HDATA(cmd->device->host)->dma_xfer_mask || - (!dir_in && mm_end_of_chunk (addr, cmd->SCp.this_residual))) + if (addr & HDATA(cmd->device->host)->dma_xfer_mask) { HDATA(cmd->device->host)->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff; diff --git a/drivers/scsi/oktagon_esp.c b/drivers/scsi/oktagon_esp.c index 8e5eadb..c2c65ac 100644 --- a/drivers/scsi/oktagon_esp.c +++ b/drivers/scsi/oktagon_esp.c @@ -7,7 +7,7 @@ */ -#if defined(CONFIG_AMIGA) || defined(CONFIG_APUS) +#if defined(CONFIG_AMIGA) #define USE_BOTTOM_HALF #endif diff --git a/drivers/scsi/oktagon_io.S b/drivers/scsi/oktagon_io.S index 8a7340b..d294625 100644 --- a/drivers/scsi/oktagon_io.S +++ b/drivers/scsi/oktagon_io.S @@ -24,77 +24,6 @@ int oktag_from_io(long *addr,long *paddr,long len) */ -#ifdef CONFIG_APUS - - .file "oktagon_io.c" - -gcc2_compiled.: -/* - .section ".text" -*/ - .align 2 - .globl oktag_to_io - .type oktag_to_io,@function -oktag_to_io: - addi 5,5,3 - srwi 5,5,2 - cmpwi 1,5,0 - mr 9,3 - mr 3,4 - addi 5,5,-1 - bc 12,6,.L3 -.L5: - cmpwi 1,5,0 - lwz 0,0(3) - addi 3,3,4 - addi 5,5,-1 -exp1: stw 0,0(9) - bc 4,6,.L5 -.L3: -ret1: subf 3,4,3 - srawi 3,3,2 - blr -.Lfe1: - .size oktag_to_io,.Lfe1-oktag_to_io - .align 2 - .globl oktag_from_io - .type oktag_from_io,@function -oktag_from_io: - addi 5,5,3 - srwi 5,5,2 - cmpwi 1,5,0 - mr 9,3 - addi 5,5,-1 - bc 12,6,.L9 -.L11: - cmpwi 1,5,0 -exp2: lwz 0,0(4) - addi 5,5,-1 - stw 0,0(3) - addi 3,3,4 - bc 4,6,.L11 -.L9: -ret2: subf 3,9,3 - srawi 3,3,2 - blr -.Lfe2: - .size oktag_from_io,.Lfe2-oktag_from_io - .ident "GCC: (GNU) egcs-2.90.29 980515 (egcs-1.0.3 release)" - -/* - * Exception table. - * Second longword shows where to jump when an exception at the addr the first - * longword is pointing to is caught. - */ - -.section __ex_table,"a" - .align 2 -oktagon_except: - .long exp1,ret1 - .long exp2,ret2 - -#else - /* The code which follows is for 680x0 based assembler and is meant for Linux/m68k. It was created by cross compiling the code using the @@ -191,4 +120,3 @@ oktagon_except: .long exp2,ret2 #endif -#endif diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 0f32f4a..2cedb49 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -84,7 +84,7 @@ #ifdef CONFIG_MAC #include <asm/macints.h> #endif -#if defined(__mc68000__) || defined(CONFIG_APUS) +#if defined(__mc68000__) #include <asm/machdep.h> #include <asm/setup.h> #endif diff --git a/drivers/video/console/fonts.c b/drivers/video/console/fonts.c index 96979c3..d0c03fd 100644 --- a/drivers/video/console/fonts.c +++ b/drivers/video/console/fonts.c @@ -15,7 +15,7 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/string.h> -#if defined(__mc68000__) || defined(CONFIG_APUS) +#if defined(__mc68000__) #include <asm/setup.h> #endif #include <linux/font.h> @@ -120,7 +120,7 @@ const struct font_desc *get_default_font(int xres, int yres, u32 font_w, for(i=0; i<num_fonts; i++) { f = fonts[i]; c = f->pref; -#if defined(__mc68000__) || defined(CONFIG_APUS) +#if defined(__mc68000__) #ifdef CONFIG_FONT_PEARL_8x8 if (MACH_IS_AMIGA && f->idx == PEARL8x8_IDX) c = 100; diff --git a/include/asm-m68k/pgtable.h b/include/asm-m68k/pgtable.h index 778a4c5..0b604f0 100644 --- a/include/asm-m68k/pgtable.h +++ b/include/asm-m68k/pgtable.h @@ -107,8 +107,6 @@ extern void *empty_zero_page; /* 64-bit machines, beware! SRB. */ #define SIZEOF_PTR_LOG2 2 -#define mm_end_of_chunk(addr, len) 0 - extern void kernel_set_cachemode(void *addr, unsigned long size, int cmode); /* diff --git a/sound/oss/dmasound/Kconfig b/sound/oss/dmasound/Kconfig index 71b3134..3eb7827 100644 --- a/sound/oss/dmasound/Kconfig +++ b/sound/oss/dmasound/Kconfig @@ -14,7 +14,7 @@ config DMASOUND_ATARI config DMASOUND_PAULA tristate "Amiga DMA sound support" - depends on (AMIGA || APUS) && SOUND + depends on AMIGA && SOUND select DMASOUND help If you want to use the internal audio of your Amiga in Linux, answer diff --git a/sound/oss/dmasound/dmasound_paula.c b/sound/oss/dmasound/dmasound_paula.c index 90fc058..202e810 100644 --- a/sound/oss/dmasound/dmasound_paula.c +++ b/sound/oss/dmasound/dmasound_paula.c @@ -91,10 +91,6 @@ static irqreturn_t AmiInterrupt(int irq, void *dummy); * power LED are controlled by the same line. */ -#ifdef CONFIG_APUS -#define mach_heartbeat ppc_md.heartbeat -#endif - static void (*saved_heartbeat)(int) = NULL; static inline void disable_heartbeat(void) - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html