NOTE: This is on top of the 'upstream-linus' branch, in a linear
history. If you pull this, you get BOTH this and upstream-linus. If
you already pulled upstream-linus, you will get only what you see below.
This has been in -mm for a while, but didn't make the initial push due
to my own fault.
Hardware SATA link power management (ALPM) has a __significant__
positive impact on power saving. At the min_power setting (maximize
power savings), there have been claimed of battery life being extended
by 30-60 minutes or more (on a 4-6 hour battery).
Please pull from 'alpm' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git alpm
to receive the following updates:
.../scsi/link_power_management_policy.txt | 19 ++
drivers/ata/ahci.c | 157 ++++++++++++++++-
drivers/ata/libata-core.c | 196 +++++++++++++++++++-
drivers/ata/libata-eh.c | 4 +
drivers/ata/libata-scsi.c | 68 +++++++
drivers/ata/libata.h | 2 +
include/linux/ata.h | 21 ++
include/linux/libata.h | 21 ++-
8 files changed, 484 insertions(+), 4 deletions(-)
create mode 100644 Documentation/scsi/link_power_management_policy.txt
Kristen Carlson Accardi (2):
[libata] Link power management infrastructure
[libata] AHCI: add hw link power management support
diff --git a/Documentation/scsi/link_power_management_policy.txt b/Documentation/scsi/link_power_management_policy.txt
new file mode 100644
index 0000000..d18993d
--- /dev/null
+++ b/Documentation/scsi/link_power_management_policy.txt
@@ -0,0 +1,19 @@
+This parameter allows the user to set the link (interface) power management.
+There are 3 possible options:
+
+Value Effect
+----------------------------------------------------------------------------
+min_power Tell the controller to try to make the link use the
+ least possible power when possible. This may
+ sacrifice some performance due to increased latency
+ when coming out of lower power states.
+
+max_performance Generally, this means no power management. Tell
+ the controller to have performance be a priority
+ over power management.
+
+medium_power Tell the controller to enter a lower power state
+ when possible, but do not enter the lowest power
+ state, thus improving latency over min_power setting.
+
+
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c8ab947..ed9b407 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -49,6 +49,9 @@
#define DRV_NAME "ahci"
#define DRV_VERSION "3.0"
+static int ahci_enable_alpm(struct ata_port *ap,
+ enum link_pm policy);
+static void ahci_disable_alpm(struct ata_port *ap);
enum {
AHCI_PCI_BAR = 5,
@@ -99,6 +102,7 @@ enum {
HOST_CAP_SSC = (1 << 14), /* Slumber capable */
HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
HOST_CAP_CLO = (1 << 24), /* Command List Override support */
+ HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
HOST_CAP_SNTF = (1 << 29), /* SNotification register */
HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
@@ -155,6 +159,8 @@ enum {
PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
/* PORT_CMD bits */
+ PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
+ PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
PORT_CMD_PMP = (1 << 17), /* PMP attached */
PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
@@ -178,13 +184,14 @@ enum {
AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
+ AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
/* ap->flags bits */
- AHCI_FLAG_NO_HOTPLUG = (1 << 24), /* ignore PxSERR.DIAG.N */
AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_ACPI_SATA | ATA_FLAG_AN,
+ ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
+ ATA_FLAG_IPM,
AHCI_LFLAG_COMMON = ATA_LFLAG_SKIP_D2H_BSY,
};
@@ -254,6 +261,11 @@ static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int ahci_pci_device_resume(struct pci_dev *pdev);
#endif
+static struct class_device_attribute *ahci_shost_attrs[] = {
+ &class_device_attr_link_power_management_policy,
+ NULL
+};
+
static struct scsi_host_template ahci_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
@@ -271,6 +283,7 @@ static struct scsi_host_template ahci_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+ .shost_attrs = ahci_shost_attrs,
};
static const struct ata_port_operations ahci_ops = {
@@ -302,6 +315,8 @@ static const struct ata_port_operations ahci_ops = {
.port_suspend = ahci_port_suspend,
.port_resume = ahci_port_resume,
#endif
+ .enable_pm = ahci_enable_alpm,
+ .disable_pm = ahci_disable_alpm,
.port_start = ahci_port_start,
.port_stop = ahci_port_stop,
@@ -836,6 +851,130 @@ static void ahci_power_up(struct ata_port *ap)
writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
}
+static void ahci_disable_alpm(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd;
+ struct ahci_port_priv *pp = ap->private_data;
+
+ /* IPM bits should be disabled by libata-core */
+ /* get the existing command bits */
+ cmd = readl(port_mmio + PORT_CMD);
+
+ /* disable ALPM and ASP */
+ cmd &= ~PORT_CMD_ASP;
+ cmd &= ~PORT_CMD_ALPE;
+
+ /* force the interface back to active */
+ cmd |= PORT_CMD_ICC_ACTIVE;
+
+ /* write out new cmd value */
+ writel(cmd, port_mmio + PORT_CMD);
+ cmd = readl(port_mmio + PORT_CMD);
+
+ /* wait 10ms to be sure we've come out of any low power state */
+ msleep(10);
+
+ /* clear out any PhyRdy stuff from interrupt status */
+ writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
+
+ /* go ahead and clean out PhyRdy Change from Serror too */
+ ahci_scr_write(ap, SCR_ERROR, ((1 << 16) | (1 << 18)));
+
+ /*
+ * Clear flag to indicate that we should ignore all PhyRdy
+ * state changes
+ */
+ hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
+
+ /*
+ * Enable interrupts on Phy Ready.
+ */
+ pp->intr_mask |= PORT_IRQ_PHYRDY;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+ /*
+ * don't change the link pm policy - we can be called
+ * just to turn of link pm temporarily
+ */
+}
+
+static int ahci_enable_alpm(struct ata_port *ap,
+ enum link_pm policy)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd;
+ struct ahci_port_priv *pp = ap->private_data;
+ u32 asp;
+
+ /* Make sure the host is capable of link power management */
+ if (!(hpriv->cap & HOST_CAP_ALPM))
+ return -EINVAL;
+
+ switch (policy) {
+ case MAX_PERFORMANCE:
+ case NOT_AVAILABLE:
+ /*
+ * if we came here with NOT_AVAILABLE,
+ * it just means this is the first time we
+ * have tried to enable - default to max performance,
+ * and let the user go to lower power modes on request.
+ */
+ ahci_disable_alpm(ap);
+ return 0;
+ case MIN_POWER:
+ /* configure HBA to enter SLUMBER */
+ asp = PORT_CMD_ASP;
+ break;
+ case MEDIUM_POWER:
+ /* configure HBA to enter PARTIAL */
+ asp = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /*
+ * Disable interrupts on Phy Ready. This keeps us from
+ * getting woken up due to spurious phy ready interrupts
+ * TBD - Hot plug should be done via polling now, is
+ * that even supported?
+ */
+ pp->intr_mask &= ~PORT_IRQ_PHYRDY;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+ /*
+ * Set a flag to indicate that we should ignore all PhyRdy
+ * state changes since these can happen now whenever we
+ * change link state
+ */
+ hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
+
+ /* get the existing command bits */
+ cmd = readl(port_mmio + PORT_CMD);
+
+ /*
+ * Set ASP based on Policy
+ */
+ cmd |= asp;
+
+ /*
+ * Setting this bit will instruct the HBA to aggressively
+ * enter a lower power link state when it's appropriate and
+ * based on the value set above for ASP
+ */
+ cmd |= PORT_CMD_ALPE;
+
+ /* write out new cmd value */
+ writel(cmd, port_mmio + PORT_CMD);
+ cmd = readl(port_mmio + PORT_CMD);
+
+ /* IPM bits should be set by libata-core */
+ return 0;
+}
+
#ifdef CONFIG_PM
static void ahci_power_down(struct ata_port *ap)
{
@@ -1504,6 +1643,17 @@ static void ahci_port_intr(struct ata_port *ap)
if (unlikely(resetting))
status &= ~PORT_IRQ_BAD_PMP;
+ /* If we are getting PhyRdy, this is
+ * just a power state change, we should
+ * clear out this, plus the PhyRdy/Comm
+ * Wake bits from Serror
+ */
+ if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
+ (status & PORT_IRQ_PHYRDY)) {
+ status &= ~PORT_IRQ_PHYRDY;
+ ahci_scr_write(ap, SCR_ERROR, ((1 << 16) | (1 << 18)));
+ }
+
if (unlikely(status & PORT_IRQ_ERROR)) {
ahci_error_intr(ap, status);
return;
@@ -2151,6 +2301,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
ata_port_pbar_desc(ap, AHCI_PCI_BAR,
0x100 + ap->port_no * 0x80, "port");
+ /* set initial link pm policy */
+ ap->pm_policy = NOT_AVAILABLE;
+
/* standard SATA port setup */
if (hpriv->port_map & (1 << i))
ap->ioaddr.cmd_addr = port_mmio;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3891cdc..513babe 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -620,6 +620,177 @@ void ata_dev_disable(struct ata_device *dev)
}
}
+static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy)
+{
+ struct ata_link *link = dev->link;
+ struct ata_port *ap = link->ap;
+ u32 scontrol;
+ unsigned int err_mask;
+ int rc;
+
+ /*
+ * disallow DIPM for drivers which haven't set
+ * ATA_FLAG_IPM. This is because when DIPM is enabled,
+ * phy ready will be set in the interrupt status on
+ * state changes, which will cause some drivers to
+ * think there are errors - additionally drivers will
+ * need to disable hot plug.
+ */
+ if (!(ap->flags & ATA_FLAG_IPM) || !ata_dev_enabled(dev)) {
+ ap->pm_policy = NOT_AVAILABLE;
+ return -EINVAL;
+ }
+
+ /*
+ * For DIPM, we will only enable it for the
+ * min_power setting.
+ *
+ * Why? Because Disks are too stupid to know that
+ * If the host rejects a request to go to SLUMBER
+ * they should retry at PARTIAL, and instead it
+ * just would give up. So, for medium_power to
+ * work at all, we need to only allow HIPM.
+ */
+ rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
+ if (rc)
+ return rc;
+
+ switch (policy) {
+ case MIN_POWER:
+ /* no restrictions on IPM transitions */
+ scontrol &= ~(0x3 << 8);
+ rc = sata_scr_write(link, SCR_CONTROL, scontrol);
+ if (rc)
+ return rc;
+
+ /* enable DIPM */
+ if (dev->flags & ATA_DFLAG_DIPM)
+ err_mask = ata_dev_set_feature(dev,
+ SETFEATURES_SATA_ENABLE, SATA_DIPM);
+ break;
+ case MEDIUM_POWER:
+ /* allow IPM to PARTIAL */
+ scontrol &= ~(0x1 << 8);
+ scontrol |= (0x2 << 8);
+ rc = sata_scr_write(link, SCR_CONTROL, scontrol);
+ if (rc)
+ return rc;
+
+ /* disable DIPM */
+ if (ata_dev_enabled(dev) && (dev->flags & ATA_DFLAG_DIPM))
+ err_mask = ata_dev_set_feature(dev,
+ SETFEATURES_SATA_DISABLE, SATA_DIPM);
+ break;
+ case NOT_AVAILABLE:
+ case MAX_PERFORMANCE:
+ /* disable all IPM transitions */
+ scontrol |= (0x3 << 8);
+ rc = sata_scr_write(link, SCR_CONTROL, scontrol);
+ if (rc)
+ return rc;
+
+ /* disable DIPM */
+ if (ata_dev_enabled(dev) && (dev->flags & ATA_DFLAG_DIPM))
+ err_mask = ata_dev_set_feature(dev,
+ SETFEATURES_SATA_DISABLE, SATA_DIPM);
+ break;
+ }
+
+ /* FIXME: handle SET FEATURES failure */
+ (void) err_mask;
+
+ return 0;
+}
+
+/**
+ * ata_dev_enable_pm - enable SATA interface power management
+ * @device - device to enable ipm for
+ * @policy - the link power management policy
+ *
+ * Enable SATA Interface power management. This will enable
+ * Device Interface Power Management (DIPM) for min_power
+ * policy, and then call driver specific callbacks for
+ * enabling Host Initiated Power management.
+ *
+ * Locking: Caller.
+ * Returns: -EINVAL if IPM is not supported, 0 otherwise.
+ */
+void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy)
+{
+ int rc = 0;
+ struct ata_port *ap = dev->link->ap;
+
+ /* set HIPM first, then DIPM */
+ if (ap->ops->enable_pm)
+ rc = ap->ops->enable_pm(ap, policy);
+ if (rc)
+ goto enable_pm_out;
+ rc = ata_dev_set_dipm(dev, policy);
+
+enable_pm_out:
+ if (rc)
+ ap->pm_policy = MAX_PERFORMANCE;
+ else
+ ap->pm_policy = policy;
+ return /* rc */; /* hopefully we can use 'rc' eventually */
+}
+
+/**
+ * ata_dev_disable_pm - disable SATA interface power management
+ * @device - device to enable ipm for
+ *
+ * Disable SATA Interface power management. This will disable
+ * Device Interface Power Management (DIPM) without changing
+ * policy, call driver specific callbacks for disabling Host
+ * Initiated Power management.
+ *
+ * Locking: Caller.
+ * Returns: void
+ */
+static void ata_dev_disable_pm(struct ata_device *dev)
+{
+ struct ata_port *ap = dev->link->ap;
+
+ ata_dev_set_dipm(dev, MAX_PERFORMANCE);
+ if (ap->ops->disable_pm)
+ ap->ops->disable_pm(ap);
+}
+
+void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy)
+{
+ ap->pm_policy = policy;
+ ap->link.eh_info.action |= ATA_EHI_LPM;
+ ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY;
+ ata_port_schedule_eh(ap);
+}
+
+static void ata_lpm_enable(struct ata_host *host)
+{
+ struct ata_link *link;
+ struct ata_port *ap;
+ struct ata_device *dev;
+ int i;
+
+ for (i = 0; i < host->n_ports; i++) {
+ ap = host->ports[i];
+ ata_port_for_each_link(link, ap) {
+ ata_link_for_each_dev(dev, link)
+ ata_dev_disable_pm(dev);
+ }
+ }
+}
+
+static void ata_lpm_disable(struct ata_host *host)
+{
+ int i;
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+ ata_lpm_schedule(ap, ap->pm_policy);
+ }
+}
+
+
/**
* ata_devchk - PATA device presence detection
* @ap: ATA channel to examine
@@ -2101,6 +2272,13 @@ int ata_dev_configure(struct ata_device *dev)
if (dev->flags & ATA_DFLAG_LBA48)
dev->max_sectors = ATA_MAX_SECTORS_LBA48;
+ if (!(dev->horkage & ATA_HORKAGE_IPM)) {
+ if (ata_id_has_hipm(dev->id))
+ dev->flags |= ATA_DFLAG_HIPM;
+ if (ata_id_has_dipm(dev->id))
+ dev->flags |= ATA_DFLAG_DIPM;
+ }
+
if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) {
/* Let the user know. We don't want to disallow opens for
rescue purposes, or in case the vendor is just a blithering
@@ -2126,6 +2304,13 @@ int ata_dev_configure(struct ata_device *dev)
dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
dev->max_sectors);
+ if (ata_dev_blacklisted(dev) & ATA_HORKAGE_IPM) {
+ dev->horkage |= ATA_HORKAGE_IPM;
+
+ /* reset link pm_policy for this port to no pm */
+ ap->pm_policy = MAX_PERFORMANCE;
+ }
+
if (ap->ops->dev_config)
ap->ops->dev_config(dev);
@@ -6361,6 +6546,12 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
{
int rc;
+ /*
+ * disable link pm on all ports before requesting
+ * any pm activity
+ */
+ ata_lpm_enable(host);
+
rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1);
if (rc == 0)
host->dev->power.power_state = mesg;
@@ -6383,6 +6574,9 @@ void ata_host_resume(struct ata_host *host)
ata_host_request_pm(host, PMSG_ON, ATA_EH_SOFTRESET,
ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
host->dev->power.power_state = PMSG_ON;
+
+ /* reenable link pm */
+ ata_lpm_disable(host);
}
#endif
@@ -6925,6 +7119,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
struct ata_port *ap = host->ports[i];
ata_scsi_scan_host(ap, 1);
+ ata_lpm_schedule(ap, ap->pm_policy);
}
return 0;
@@ -7321,7 +7516,6 @@ const struct ata_port_info ata_dummy_port_info = {
* likely to change as new drivers are added and updated.
* Do not depend on ABI/API stability.
*/
-
EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
EXPORT_SYMBOL_GPL(sata_deb_timing_long);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ec55d63..fefea74 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2628,6 +2628,10 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
ehc->i.flags &= ~ATA_EHI_SETMODE;
}
+ if (ehc->i.action & ATA_EHI_LPM)
+ ata_link_for_each_dev(dev, link)
+ ata_dev_enable_pm(dev, ap->pm_policy);
+
/* this link is okay now */
ehc->i.flags = 0;
continue;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index f752edd..93bd36c 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -110,6 +110,74 @@ static struct scsi_transport_template ata_scsi_transport_template = {
};
+static const struct {
+ enum link_pm value;
+ const char *name;
+} link_pm_policy[] = {
+ { NOT_AVAILABLE, "max_performance" },
+ { MIN_POWER, "min_power" },
+ { MAX_PERFORMANCE, "max_performance" },
+ { MEDIUM_POWER, "medium_power" },
+};
+
+const char *ata_scsi_lpm_get(enum link_pm policy)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(link_pm_policy); i++)
+ if (link_pm_policy[i].value == policy)
+ return link_pm_policy[i].name;
+
+ return NULL;
+}
+
+static ssize_t ata_scsi_lpm_put(struct class_device *class_dev,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(class_dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ enum link_pm policy = 0;
+ int i;
+
+ /*
+ * we are skipping array location 0 on purpose - this
+ * is because a value of NOT_AVAILABLE is displayed
+ * to the user as max_performance, but when the user
+ * writes "max_performance", they actually want the
+ * value to match MAX_PERFORMANCE.
+ */
+ for (i = 1; i < ARRAY_SIZE(link_pm_policy); i++) {
+ const int len = strlen(link_pm_policy[i].name);
+ if (strncmp(link_pm_policy[i].name, buf, len) == 0 &&
+ buf[len] == '\n') {
+ policy = link_pm_policy[i].value;
+ break;
+ }
+ }
+ if (!policy)
+ return -EINVAL;
+
+ ata_lpm_schedule(ap, policy);
+ return count;
+}
+
+static ssize_t
+ata_scsi_lpm_show(struct class_device *class_dev, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(class_dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ const char *policy =
+ ata_scsi_lpm_get(ap->pm_policy);
+
+ if (!policy)
+ return -EINVAL;
+
+ return snprintf(buf, 23, "%s\n", policy);
+}
+CLASS_DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
+ ata_scsi_lpm_show, ata_scsi_lpm_put);
+EXPORT_SYMBOL_GPL(class_device_attr_link_power_management_policy);
+
static void ata_scsi_invalid_field(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 90df58a..0e6cf3a 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -101,6 +101,8 @@ extern int sata_link_init_spd(struct ata_link *link);
extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
extern struct ata_port *ata_port_alloc(struct ata_host *host);
+extern void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy);
+extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm);
/* libata-acpi.c */
#ifdef CONFIG_ATA_ACPI
diff --git a/include/linux/ata.h b/include/linux/ata.h
index e21c002..128dc7a 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -236,6 +236,7 @@ enum {
/* SETFEATURE Sector counts for SATA features */
SATA_AN = 0x05, /* Asynchronous Notification */
+ SATA_DIPM = 0x03, /* Device Initiated Power Management */
/* ATAPI stuff */
ATAPI_PKT_DMA = (1 << 0),
@@ -378,6 +379,26 @@ struct ata_taskfile {
#define ata_id_cdb_intr(id) (((id)[0] & 0x60) == 0x20)
+static inline bool ata_id_has_hipm(const u16 *id)
+{
+ u16 val = id[76];
+
+ if (val == 0 || val == 0xffff)
+ return false;
+
+ return val & (1 << 9);
+}
+
+static inline bool ata_id_has_dipm(const u16 *id)
+{
+ u16 val = id[78];
+
+ if (val == 0 || val == 0xffff)
+ return false;
+
+ return val & (1 << 3);
+}
+
static inline int ata_id_has_fua(const u16 *id)
{
if ((id[84] & 0xC000) != 0x4000)
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 439d40f..147ccc4 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -133,6 +133,8 @@ enum {
ATA_DFLAG_ACPI_PENDING = (1 << 5), /* ACPI resume action pending */
ATA_DFLAG_ACPI_FAILED = (1 << 6), /* ACPI on devcfg has failed */
ATA_DFLAG_AN = (1 << 7), /* AN configured */
+ ATA_DFLAG_HIPM = (1 << 8), /* device supports HIPM */
+ ATA_DFLAG_DIPM = (1 << 9), /* device supports DIPM */
ATA_DFLAG_CFG_MASK = (1 << 12) - 1,
ATA_DFLAG_PIO = (1 << 12), /* device limited to PIO mode */
@@ -186,6 +188,7 @@ enum {
ATA_FLAG_ACPI_SATA = (1 << 17), /* need native SATA ACPI layout */
ATA_FLAG_AN = (1 << 18), /* controller supports AN */
ATA_FLAG_PMP = (1 << 19), /* controller supports PMP */
+ ATA_FLAG_IPM = (1 << 20), /* driver can handle IPM */
/* The following flag belongs to ap->pflags but is kept in
* ap->flags because it's referenced in many LLDs and will be
@@ -302,6 +305,7 @@ enum {
ATA_EHI_RESUME_LINK = (1 << 1), /* resume link (reset modifier) */
ATA_EHI_NO_AUTOPSY = (1 << 2), /* no autopsy */
ATA_EHI_QUIET = (1 << 3), /* be quiet */
+ ATA_EHI_LPM = (1 << 4), /* link power management action */
ATA_EHI_DID_SOFTRESET = (1 << 16), /* already soft-reset this port */
ATA_EHI_DID_HARDRESET = (1 << 17), /* already soft-reset this port */
@@ -333,6 +337,7 @@ enum {
ATA_HORKAGE_BROKEN_HPA = (1 << 4), /* Broken HPA */
ATA_HORKAGE_SKIP_PM = (1 << 5), /* Skip PM operations */
ATA_HORKAGE_HPA_SIZE = (1 << 6), /* native size off by one */
+ ATA_HORKAGE_IPM = (1 << 7), /* Link PM problems */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
@@ -378,6 +383,18 @@ typedef int (*ata_reset_fn_t)(struct ata_link *link, unsigned int *classes,
unsigned long deadline);
typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes);
+/*
+ * host pm policy: If you alter this, you also need to alter libata-scsi.c
+ * (for the ascii descriptions)
+ */
+enum link_pm {
+ NOT_AVAILABLE,
+ MIN_POWER,
+ MAX_PERFORMANCE,
+ MEDIUM_POWER,
+};
+extern struct class_device_attribute class_device_attr_link_power_management_policy;
+
struct ata_ioports {
void __iomem *cmd_addr;
void __iomem *data_addr;
@@ -624,6 +641,7 @@ struct ata_port {
pm_message_t pm_mesg;
int *pm_result;
+ enum link_pm pm_policy;
struct timer_list fastdrain_timer;
unsigned long fastdrain_cnt;
@@ -691,7 +709,8 @@ struct ata_port_operations {
int (*port_suspend) (struct ata_port *ap, pm_message_t mesg);
int (*port_resume) (struct ata_port *ap);
-
+ int (*enable_pm) (struct ata_port *ap, enum link_pm policy);
+ void (*disable_pm) (struct ata_port *ap);
int (*port_start) (struct ata_port *ap);
void (*port_stop) (struct ata_port *ap);
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
