Linux IDE Archive

• Thread Index

• Re: [PATCH] pata_sil680: kill bogus reset code (take 2)
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Robert Hancock
• Re: sata NCQ blacklist entry
  • From: Jan-Simon Möller
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Mark Lord
• RE: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Morrison, Tom
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Laurent Riffard
• [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce pata node, make use pata_of_platform driver
  • From: Anton Vorontsov
• [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Anton Vorontsov
• [PATCH 1/3] [libata] pata_platform: make probe and remove functions device type neutral
  • From: Anton Vorontsov
• [RFC][PATCH 0/3] OF-platform PATA driver
  • From: Anton Vorontsov
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Mark Lord
• RE: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Morrison, Tom
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Mark Lord
• Re: Lost interrupt with cmd 64x
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: add TORiSAN model: CD-ROM CDR_U200 fw: 1.09 to DMA blacklist
  • From: Sergei Shtylyov
• Re: [PATCH] alim15x3: add Mitac 8317 and derivatives to ali_cable_override()
  • From: Sergei Shtylyov
• Re: [PATCH] piix: add HP compaq laptop to short cable list
  • From: Sergei Shtylyov
• Re: [PATCH] ide: remove bogus ide_fix_driveid() comment
  • From: Sergei Shtylyov
• Re: [PATCH] trm290: remove bogus init_hwif_trm290() comment
  • From: Sergei Shtylyov
• Re: [PATCH] ali14xx: constify __initdata
  • From: Sergei Shtylyov
• Re: Lost interrupt with cmd 64x
  • From: Sergei Shtylyov
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Hannes Reinecke
• Re: 2.6.24-rc2 displays incorrect DVD description
  • From: Ansgar Knappheide
• Re: 2.6.24-rc2 displays incorrect DVD description
  • From: Andrew Morton
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Hannes Reinecke
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Laurent Riffard
• Re: sata NCQ blacklist entry
  • From: Andrew Morton
• [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Robert Hancock
• [PATCH] sata_nv: don't use legacy DMA in ADMA mode (v2)
  • From: Robert Hancock
• Re: SATA port multiplier Identify/Fail LEDs: driver support
  • From: Richard Scobie
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v2)
  • From: Tejun Heo
• Re: [PATCHSET] libata: update timing and fix pata_amd transfer mode selection
  • From: Tejun Heo
• Re: [PATCHSET] libata: update EH speed down logic, take #2
  • From: Tejun Heo
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v2)
  • From: Robert Hancock
• Re: Problem with PCMCIA IDE
  • From: Bartlomiej Zolnierkiewicz
• Re: Lost interrupt with cmd 64x
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] piix: add HP compaq laptop to short cable list
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ali14xx: constify __initdata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: remove bogus ide_fix_driveid() comment
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] trm290: remove bogus init_hwif_trm290() comment
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] alim15x3: add Mitac 8317 and derivatives to ali_cable_override()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: add TORiSAN model: CD-ROM CDR_U200 fw: 1.09 to DMA blacklist
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 17/59] drivers/ide: Add missing "space"
  • From: Bartlomiej Zolnierkiewicz
• "buggy cmd640" message followed by soft lockup
  • From: Frans Pop
• [PATCH #upstream-fixes] sata_sil24: fix sg table sizing
  • From: Tejun Heo
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v2)
  • From: Tejun Heo
• Re: [PATCH] pata_jmicron: fix disabled port handling in jmicron_pre_reset()
  • From: Tejun Heo
• Re: SATA port multiplier Identify/Fail LEDs: driver support
  • From: Tejun Heo
• Re: [PATCH 1/2] sata_nv: don't use legacy DMA in ADMA mode
  • From: Tejun Heo
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Andrew Morton
• SATA PMP support in 2.6.24-rc3?
  • From: Gaston, Jason D
• Re: Possibly SATA related freeze killed networking and RAID
  • From: noah
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v2)
  • From: Robert Hancock
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v2)
  • From: Vincent Fortier
• Re: [PATCH 6/21] ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig
  • From: Sergei Shtylyov
• Re: [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 1/2] sata_nv: don't use legacy DMA in ADMA mode
  • From: Robert Hancock
• [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v2)
  • From: Robert Hancock
• Re: Possibly SATA related freeze killed networking and RAID
  • From: Alan Cox
• Re: [PATCH 6/21] ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig
  • From: Bartlomiej Zolnierkiewicz
• Re: Possibly SATA related freeze killed networking and RAID
  • From: noah
• Re: Possibly SATA related freeze killed networking and RAID
  • From: Alan Cox
• sata_sil issue on 2.6.22
  • From: Mark Paulus
• SATA port multiplier Identify/Fail LEDs: driver support
  • From: Jeremy Jackson
• Possibly SATA related freeze killed networking and RAID
  • From: noah
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM II
  • From: Jens Axboe
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Andi Kleen
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Thomas Gleixner
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM II
  • From: Andi Kleen
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Andi Kleen
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Thomas Gleixner
• Re: laptop reboots right after hibernation
  • From: Kjartan Maraas
• [PATCH] libata: blacklist TOSHIBA MK1637GSX
  • From: Konstantin A. Lepikhov
• 2.6.23.1 SATA disk not properly spun down
  • From: Filippo Zangheri
• Re: [PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3)
  • From: Tejun Heo
• Re: [PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3)
  • From: Robert Hancock
• [PATCH 17/59] drivers/ide: Add missing "space"
  • From: Joe Perches
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Tejun Heo
• Re: [PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3)
  • From: Tejun Heo
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Srihari Vijayaraghavan
• Re: [Bugme-new] [Bug 9410] New: TOSHIBA MK1637GSX do spurious command completion
  • From: Andrew Morton
• Re: [PATCH 6/21] ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig
  • From: Sergei Shtylyov
• Re: [PATCH 5/21] ide: add CONFIG_IDE_H8300 config option
  • From: Sergei Shtylyov
• Re: [PATCH 4/21] ide/Kconfig: fix mpc8xx host driver dependencies
  • From: Sergei Shtylyov
• Re: Process Scheduling Issue using sg/libata
  • From: Alan Cox
• Re: Process Scheduling Issue using sg/libata
  • From: Tejun Heo
• Re: Process Scheduling Issue using sg/libata
  • From: James Chapman
• [PATCH] ata.h: Don't do a SATA check for 40wire_relaxed
  • From: Alan Cox
• [PATCH] pata_ninja32: Cardbus ATA initial support
  • From: Alan Cox
• [PATCH] pata_pcmcia: Minor cleanups and support for dual channel cards
  • From: Alan Cox
• [PATCH] pata_hpt37x: Fix cable detect bug spotted by Sergei
  • From: Alan Cox
• [PATCH] pata_ali: Lots of problems still showing up with small ATAPI DMA
  • From: Alan Cox
• [PATCH] pata_ali: Add Mitac 8317 and derivatives
  • From: Alan Cox
• [PATCH] libata-sff: tf_load
  • From: Alan Cox
• [PATCH] libata: IORDY handling
  • From: Alan Cox
• [PATCH] libata-core: List more documentation sources for reference
  • From: Alan Cox
• [PATCH] ahci: Invalid use of writel/readl with iomap
  • From: Alan Cox
• Re: [PATCH] pata_platform: move ARCH_RPC to use MACH_HAS_PATA_PLATFORM
  • From: Ben Dooks
• Re: Hang during boot in piix_init_pcs (ata_piix.c) with macbook pro
  • From: Thomas Rohwer
• Re: Hang during boot in piix_init_pcs (ata_piix.c) with macbook pro
  • From: Tejun Heo
• Re: Hang during boot in piix_init_pcs (ata_piix.c) with macbook pro
  • From: Thomas Rohwer
• Re: [PATCH] pata_platform: move ARCH_RPC to use MACH_HAS_PATA_PLATFORM
  • From: Russell King - ARM Linux
• [PATCH] pata_platform: move ARCH_RPC to use MACH_HAS_PATA_PLATFORM
  • From: Ben Dooks
• [PATCH] pata_platfrom: add MACH_HAS_PATA_PLATFORM configuration
  • From: Ben Dooks
• Re: [PATCH 1/21] ide: dump taskfile HOB registers in ide_tf_load() (if DEBUG is defined)
  • From: Sergei Shtylyov
• Re: [PATCH 3/21] macide/q40ide: add missing __init tag to {macide,q40ide}_init()
  • From: Sergei Shtylyov
• [PATCH] pata_jmicron: fix disabled port handling in jmicron_pre_reset()
  • From: Tejun Heo
• Re: stable basic 4-port SATA card
  • From: Tejun Heo
• [PATCH #upstream] ahci: update PCS programming
  • From: Tejun Heo
• Re: Hang during boot in piix_init_pcs (ata_piix.c) with macbook pro
  • From: Tejun Heo
• Re: size of git repository (was Re: [BUG] New Kernel Bugs)
  • From: Willy Tarreau
• [git patches] libata fixes
  • From: Tejun Heo
• [PATCH] ata_piix: port enable for the first SATA controller of ICH8 is 0xf not 0x3
  • From: Tejun Heo
• [PATCH] ata_piix: only enable the first port on apple macbook pro
  • From: Tejun Heo
• [PATCH] ata_piix: reorganize controller IDs
  • From: Tejun Heo
• Re: Hang during boot in piix_init_pcs (ata_piix.c) with macbook pro
  • From: Tejun Heo
• Re: Problem with PCMCIA IDE
  • From: Akkana Peck
• Re: [PATCH 21/21] ide: make remaining built-in only IDE host drivers modular
  • From: Bartlomiej Zolnierkiewicz
• Re: Process Scheduling Issue using sg/libata
  • From: Mark Lord
• Re: [PATCH 21/21] ide: make remaining built-in only IDE host drivers modular
  • From: Benjamin Herrenschmidt
• Re: Problem with PCMCIA IDE
  • From: Alan Cox
• [PATCH 21/21] ide: make remaining built-in only IDE host drivers modular
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 20/21] ide: fix host drivers depending on ide_generic to probe for interfaces
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 19/21] cmd640: fix dependency on IDE_GENERIC
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 18/21] ide: move ide_arm_init() call from init_ide_data() to ide_init()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 17/21] ide: drop 'initializing' argument from ide_register_hw()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 16/21] ide: add ide_init_port_hw() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/21] sgiioc4: always init hwif->io_ports
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/21] ide: remove ideprobe_init()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/21] ide: add hwif->chipset fixup to ide_device_add()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/21] rapide: set hwif->chipset
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/21] ide: fix probing for hosts with serialized or IRQ sharing interfaces
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 9/21] ide: kill probe_hwif_init()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/21] ide: don't try to unregister interfaces if 'initializing' in ide_register_hw()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/21] ide-cris: don't override ide_register_hw() result
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/21] ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/21] ide: add CONFIG_IDE_H8300 config option
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/21] ide/Kconfig: fix mpc8xx host driver dependencies
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/21] macide/q40ide: add missing __init tag to {macide,q40ide}_init()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/21] ide: merge ->fixup and ->quirkproc methods
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/21] ide: dump taskfile HOB registers in ide_tf_load() (if DEBUG is defined)
  • From: Bartlomiej Zolnierkiewicz
• Re: Process Scheduling Issue using sg/libata
  • From: Fajun Chen
• Re: [PATCH 2.6.24-rc3] aec62xx: Fix kernel oops in driver's probe function
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] drivers/ide/ide-probe.c Skip ide_wait_not_busy on noprobe-disks. was: [PATCH][RESUBMIT] drivers/ide/ide-probe.c, kernel 2.6.23.1
  • From: Bartlomiej Zolnierkiewicz
• Problem with PCMCIA IDE
  • From: Akkana Peck
• Re: laptop reboots right after hibernation
  • From: Tomas Carnecky
• Re: Process Scheduling Issue using sg/libata
  • From: Mark Lord
• Re: Process Scheduling Issue using sg/libata
  • From: Fajun Chen
• Re: Hang during boot in piix_init_pcs (ata_piix.c) with macbook pro
  • From: Thomas Rohwer
• Re: size of git repository (was Re: [BUG] New Kernel Bugs)
  • From: Rene Herman
• Re: size of git repository (was Re: [BUG] New Kernel Bugs)
  • From: Ingo Molnar
• Re: size of git repository (was Re: [BUG] New Kernel Bugs)
  • From: James Bottomley
• Re: Process Scheduling Issue using sg/libata
  • From: Mark Lord
• Re: size of git repository (was Re: [BUG] New Kernel Bugs)
  • From: Rene Herman
• Lost interrupt with cmd 64x
  • From: Tobias Oed
• size of git repository (was Re: [BUG] New Kernel Bugs)
  • From: Pavel Machek
• Re: Process Scheduling Issue using sg/libata
  • From: Fajun Chen
• [PATCH 2.6.24-rc3] aec62xx: Fix kernel oops in driver's probe function
  • From: Aleksandar Radovanovic
• Re: Process Scheduling Issue using sg/libata
  • From: Mark Lord
• Re: Process Scheduling Issue using sg/libata
  • From: Fajun Chen
• Re: Process Scheduling Issue using sg/libata
  • From: Fajun Chen
• Re: Process Scheduling Issue using sg/libata
  • From: James Chapman
• Re: Process Scheduling Issue using sg/libata
  • From: Mark Lord
• Re: Process Scheduling Issue using sg/libata
  • From: Fajun Chen
• Re: Process Scheduling Issue using sg/libata
  • From: Fajun Chen
• Re: Process Scheduling Issue using sg/libata
  • From: Mark Lord
• Re: Process Scheduling Issue using sg/libata
  • From: Tejun Heo
• Process Scheduling Issue using sg/libata
  • From: Fajun Chen
• [PATCH] drivers/ide/ide-probe.c Skip ide_wait_not_busy on noprobe-disks. was: [PATCH][RESUBMIT] drivers/ide/ide-probe.c, kernel 2.6.23.1
  • From: Jonas Stare
• Re: [PATCH] siimage: remove resetproc() method
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH][RESUBMIT] drivers/ide/ide-probe.c, kernel 2.6.23.1
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: don't set PIO mode on pre-EIDE drives
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 6/13] sgiioc4: add ide_toggle_bounce() calls
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: don't set PIO mode on pre-EIDE drives
  • From: Alan Cox
• Re: [PATCH][RESUBMIT] drivers/ide/ide-probe.c, kernel 2.6.23.1
  • From: Jonas Stare
• Re: [PATCH] ide: don't set PIO mode on pre-EIDE drives
  • From: Sergei Shtylyov
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: [PATCH] ide: don't set PIO mode on pre-EIDE drives
  • From: Alan Cox
• Re: [PATCH] pata_sil680: kill bogus reset code
  • From: Alan Cox
• [PATCH] pata_sil680: kill bogus reset code (take 2)
  • From: Sergei Shtylyov
• Re: [PATCH] ide: don't set PIO mode on pre-EIDE drives
  • From: Sergei Shtylyov
• Re: [PATCH] ide: don't set PIO mode on pre-EIDE drives
  • From: Alan Cox
• Re: [PATCH 7/9] via82cxxx: keep local ide_pci_device_t copy
  • From: Sergei Shtylyov
• [PATCH] pata_sil680: kill bogus reset code
  • From: Sergei Shtylyov
• [PATCH] siimage: remove resetproc() method
  • From: Sergei Shtylyov
• Re: [PATCH] cmd64x: don't clear the other channels interrupt
  • From: Sergei Shtylyov
• [PATCH] ide: don't set PIO mode on pre-EIDE drives
  • From: Sergei Shtylyov
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: [PATCH][RESUBMIT] drivers/ide/ide-probe.c, kernel 2.6.23.1
  • From: Sergei Shtylyov
• Re: [PATCH][RESUBMIT] drivers/ide/ide-probe.c, kernel 2.6.23.1
  • From: Jonas Stare
• Re: [PATCH] it821x/jmicron: fix return value of {it821x,jmicron}_init_one()
  • From: Sergei Shtylyov
• Re: [PATCH 6/13] sgiioc4: add ide_toggle_bounce() calls
  • From: Jeremy Higdon
• Re: [Bugme-new] [Bug 9393] New: SError: { DevExch } occuring and causing disruption
  • From: Andrew Morton
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: [BUG] New Kernel Bugs
  • From: J. Bruce Fields
• Re: stable basic 4-port SATA card
  • From: john
• Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Mark Lord
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: [BUG] New Kernel Bugs
  • From: Ben Dooks
• Re: [PATCH] drivers/ide/ide-probe.c, kernel 2.6.23.1
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 14/18] ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 10/13] ide-cris: fix DMA methods
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] sis5513.c: Add Packard Bell EasyNote K5305 to laptops
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] cmd64x: don't clear the other channels interrupt
  • From: Martin Rogge
• Re: sata_mv: hard resetting port
  • From: Mark Lord
• Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Mark Lord
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: [BUG] New Kernel Bugs
  • From: Daniel Barkalow
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: [BUG] New Kernel Bugs
  • From: Theodore Tso
• Re: FIS structure and Command List structure for AHCI SATA controller
  • From: mike zheng
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Rene Herman
• Re: sata_mv: hard resetting port
  • From: Mark Lord
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Takashi Iwai
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Olivier Galibert
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Jörn Engel
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Rene Herman
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Bron Gondwana
• Re: [PATCH 14/18] ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag
  • From: Sergei Shtylyov
• Re: sata_mv: hard resetting port
  • From: Tomasz Chmielewski
• Re: [PATCH 14/18] ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag
  • From: Sergei Shtylyov
• Re: sata_mv: hard resetting port
  • From: Tomasz Chmielewski
• Re: stable basic 4-port SATA card
  • From: Mikael Pettersson
• Re: stable basic 4-port SATA card
  • From: Jim Paris
• Re: libata_uli puts second channel to PIO4 on 2.6.18
  • From: Patric Karlsson
• Re: sata_nv on MCP51: NCQ possible?
  • From: Michael Tokarev
• Re: libata_uli puts second channel to PIO4 on 2.6.18
  • From: Patric Karlsson
• sata_nv on MCP51: NCQ possible?
  • From: Michael Tokarev
• Re: [PATCH] drivers/ide/ide-probe.c, kernel 2.6.23.1
  • From: Jonas Stare
• Re: stable basic 4-port SATA card
  • From: Tejun Heo
• Re: stable basic 4-port SATA card
  • From: Jeff Breidenbach
• [patch 38/40] libata: backport ATA_FLAG_NO_SRST and ATA_FLAG_ASSUME_ATA, part 2
  • From: Greg Kroah-Hartman
• [patch 37/40] libata: backport ATA_FLAG_NO_SRST and ATA_FLAG_ASSUME_ATA
  • From: Greg Kroah-Hartman
• [patch 14/40] libata: sync NCQ blacklist with upstream
  • From: Greg Kroah-Hartman
• Re: Moderated list
  • From: Rene Herman
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Rene Herman
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Bron Gondwana
• Re: stable basic 4-port SATA card
  • From: Mark Lord
• Re: stable basic 4-port SATA card
  • From: Robert Hancock
• Re: sata_mv: hard resetting port
  • From: Mark Lord
• Re: [PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3)
  • From: Tejun Heo
• Re: [PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3)
  • From: Robert Hancock
• Re: sata_mv: hard resetting port
  • From: Tejun Heo
• Re: stable basic 4-port SATA card
  • From: Tejun Heo
• Re: [PATCH] pata_sis.c: Add Packard Bell EasyNote K5305 to laptops
  • From: Tejun Heo
• Re: [BUG] New Kernel Bugs
  • From: Neil Brown
• Re: [BUG] New Kernel Bugs
  • From: Neil Brown
• Re: [PATCH] libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs
  • From: Tejun Heo
• Re: [PATCH 1/2] sata_nv: don't use legacy DMA in ADMA mode
  • From: Tejun Heo
• Re: [PATCH 1/2] sata_nv: don't use legacy DMA in ADMA mode
  • From: Tejun Heo
• Re: [PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3)
  • From: Tejun Heo
• Re: Promise SATA TX4 300 port timeout with sata_promise in 2.6.22, kernel panic in 2.6.23
  • From: Tejun Heo
• Re: [PATCH 2/2] libata: use ATA_HORKAGE_STUCK_ERR for ATAPI tape drives
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  • From: Tejun Heo
• Re: sata_mv PCI ERROR; PCI IRQ reason=0x00000000 highpoint rocketraid 2300 pci-e
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Daniel Barkalow
• Re: Moderated list
  • From: David Miller
• sata_mv PCI ERROR; PCI IRQ reason=0x00000000 highpoint rocketraid 2300 pci-e
  • From: Hein-Pieter van Braam
• Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Mark Lord
• Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Mark Lord
• Re: [Bugme-new] [Bug 9373] New: PDC20267 exception Emask on I/O
  • From: Bjoern Olausson
• Re: [BUG] New Kernel Bugs
  • From: Gabriel C
• Re: [BUG] New Kernel Bugs
  • From: Denys Vlasenko
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: [BUG] New Kernel Bugs
  • From: Randy Dunlap
• Re: [BUG] New Kernel Bugs
  • From: david
• Re: [BUG] New Kernel Bugs
  • From: Ingo Molnar
• Re: [BUG] New Kernel Bugs
  • From: Ingo Molnar
• Re: [BUG] New Kernel Bugs
  • From: Ingo Molnar
• Re: [BUG] New Kernel Bugs
  • From: Randy Dunlap
• Re: [BUG] New Kernel Bugs
  • From: Ingo Molnar
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: [BUG] New Kernel Bugs
  • From: James Bottomley
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Greg KH
• Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Mark Lord
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Mark Lord
• Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Mark Lord
• RE: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Allen Martin
• Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Kok, Auke
• Re: [BUG] New Kernel Bugs
  • From: J. Bruce Fields
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Mark Lord
• Re: [PATCH] libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs
  • From: Alan Cox
• 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• [PATCH] libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Randy Dunlap
• Re: [stable] [PATCH] ide: fix serverworks.c UDMA regression
  • From: Greg KH
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Andi Kleen
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Thomas Gleixner
• Re: [PATCH 10/13] ide-cris: fix DMA methods
  • From: Sergei Shtylyov
• Re: [PATCH 13/13] ide: merge ->dma_host_{on,off} methods into ->dma_host_set method
  • From: Sergei Shtylyov
• Re: [PATCH 9/13] ide: remove ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t
  • From: Sergei Shtylyov
• Re: sata_mv: hard resetting port
  • From: Mark Lord
• Re: sata_mv: hard resetting port
  • From: Tomasz Chmielewski
• Re: sata_mv: hard resetting port
  • From: Mark Lord
• Re: [PATCH 4/13] cy82c693: correct DMA modes clipping
  • From: Sergei Shtylyov
• Re: [BUG] New Kernel Bugs
  • From: Larry Finger
• Re: [stable] [PATCH] ide: fix serverworks.c UDMA regression
  • From: Tony Battersby
• Re: [BUG] New Kernel Bugs
  • From: Ingo Molnar
• Re: [BUG] New Kernel Bugs
  • From: Fabio Comolli
• Re: [BUG] New Kernel Bugs
  • From: Ingo Molnar
• Re: [BUG] New Kernel Bugs
  • From: Pavel Machek
• Re: Moderated list (Was: Re: [BUG] New Kernel Bugs)
  • From: Takashi Iwai
• Re: [BUG] New Kernel Bugs
  • From: Hannes Reinecke
• Re: [BUG] New Kernel Bugs
  • From: Matthew Wilcox
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Rene Herman
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Rene Herman
• Re: [BUG] New Kernel Bugs
  • From: Jiri Kosina
• Re: Moderated list (Was: Re: [BUG] New Kernel Bugs)
  • From: Rene Herman
• Re: [PATCH 1/2] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  • From: Alan Cox
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Andi Kleen
• Moderated list (Was: Re: [BUG] New Kernel Bugs)
  • From: Takashi Iwai
• Re: [PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3)
  • From: Alan Cox
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: David Miller
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: David Miller
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Srihari Vijayaraghavan
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Rene Herman
• Re: [PATCH 9/18] ide: kill duplicate code in ide_dump_{ata,atapi}_status()
  • From: Sergei Shtylyov
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• sata_mv: hard resetting port
  • From: Tomasz Chmielewski
• Re: Promise SATA TX4 300 port timeout with sata_promise in 2.6.22, kernel panic in 2.6.23
  • From: Patric Karlsson
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: Promise SATA TX4 300 port timeout with sata_promise in 2.6.22, kernel panic in 2.6.23
  • From: I Stratford
• Re: [BUG] New Kernel Bugs
  • From: Denys Vlasenko
• Re: [BUG] New Kernel Bugs
  • From: Adrian Bunk
• stable basic 4-port SATA card
  • From: Jeff Breidenbach
• [PATCH 2/2] libata: use ATA_HORKAGE_STUCK_ERR for ATAPI tape drives
  • From: Albert Lee
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• [PATCH 1/2] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  • From: Albert Lee
• Re: [BUG] New Kernel Bugs
  • From: Sam Ravnborg
• Re: [BUG] New Kernel Bugs
  • From: Sam Ravnborg
• Re: Delkin Cardbus IDE, a.k.a. ASKA "Ninja" chipset
  • From: Mark Lord
• [PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3)
  • From: Robert Hancock
• [PATCH 1/2] sata_nv: don't use legacy DMA in ADMA mode
  • From: Robert Hancock
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB
  • From: Robert Hancock
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: libata , Silicon Image 3124
  • From: Tejun Heo
• Re: [PATCH] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  • From: Tejun Heo
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB
  • From: Tejun Heo
• Re: [Bugme-new] [Bug 9373] New: PDC20267 exception Emask on I/O
  • From: Bjoern Olausson
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• Re: [BUG] New Kernel Bugs
  • From: Stephen Hemminger
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• Re: [Bugme-new] [Bug 9373] New: PDC20267 exception Emask on I/O
  • From: Andrew Morton
• Re: Delkin Cardbus IDE, a.k.a. ASKA "Ninja" chipset
  • From: Alan Cox
• Re: [BUG] New Kernel Bugs
  • From: Chuck Ebbert
• Re: [BUG] New Kernel Bugs
  • From: Denys Vlasenko
• Re: [BUG] New Kernel Bugs
  • From: Denys Vlasenko
• Re: [BUG] New Kernel Bugs
  • From: Denys Vlasenko
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [stable] [PATCH] ide: fix serverworks.c UDMA regression
  • From: Greg KH
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [BUG] New Kernel Bugs
  • From: Thomas Gleixner
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: [BUG] New Kernel Bugs
  • From: Jörn Engel
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [BUG] New Kernel Bugs
  • From: Jörn Engel
• Re: [BUG] New Kernel Bugs
  • From: Frans Pop
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: [BUG] New Kernel Bugs
  • From: Rafael J. Wysocki
• Re: Correct behaviour of an ATA/ATAPI CD Drive
  • From: Alan Cox
• Correct behaviour of an ATA/ATAPI CD Drive
  • From: Adrian McMenamin
• Re: [BUG] New Kernel Bugs
  • From: Romano Giannetti
• Re: [BUG] New Kernel Bugs
  • From: Adrian Bunk
• Re: [PATCH 1/13] serverworks: cleanup ->set_dma_mode method
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 12/13] ide: move drive->using_dma check to callers of ->dma_host_on method
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] pata_sis.c: Add Packard Bell EasyNote K5305 to laptops
  • From: Alan Cox
• Re: [BUG] New Kernel Bugs
  • From: Alan Cox
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: remove stale/incorrect comment from setup-pci.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] it821x/jmicron: fix return value of {it821x,jmicron}_init_one()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] cmd64x: don't clear the other channels interrupt
  • From: Bartlomiej Zolnierkiewicz
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• [PATCH] pata_sis.c: Add Packard Bell EasyNote K5305 to laptops
  • From: Gabriel C
• [PATCH] sis5513.c: Add Packard Bell EasyNote K5305 to laptops
  • From: Gabriel C
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Adrian Bunk
• Re: [BUG] New Kernel Bugs
  • From: Larry Finger
• Re: [BUG] New Kernel Bugs
  • From: Adrian Bunk
• Re: [BUG] New Kernel Bugs
  • From: Adrian Bunk
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [BUG] New Kernel Bugs
  • From: Adrian Bunk
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Adrian Bunk
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: [BUG] New Kernel Bugs
  • From: Gabriel C
• Re: [BUG] New Kernel Bugs
  • From: Theodore Tso
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Matthew Wilcox
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Matthew Wilcox
• Re: [BUG] New Kernel Bugs
  • From: Adrian Bunk
• Re: [BUG] New Kernel Bugs
  • From: Alan Cox
• Re: [PATCH] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Peter Zijlstra
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [PATCH] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  • From: Alan Cox
• Re: [BUG] New Kernel Bugs
  • From: Adrian Bunk
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [BUG] New Kernel Bugs
  • From: Adrian Bunk
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Jan Kara
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Larry Finger
• Re: [BUG] New Kernel Bugs
  • From: Alan Cox
• Re: [BUG] New Kernel Bugs
  • From: Randy Dunlap
• Re: [PATCH] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Theodore Tso
• Re: [BUG] New Kernel Bugs
  • From: Adrian Bunk
• Re: [BUG] New Kernel Bugs
  • From: Randy Dunlap
• Re: [BUG] New Kernel Bugs
  • From: Ingo Molnar
• Re: [BUG] New Kernel Bugs
  • From: Ingo Molnar
• Re: [BUG] New Kernel Bugs
  • From: Thomas Gleixner
• Re: [BUG] New Kernel Bugs
  • From: Thomas Gleixner
• Re: [BUG] New Kernel Bugs
  • From: Ray Lee
• Re: [BUG] New Kernel Bugs
  • From: Benoit Boissinot
• Re: [BUG] New Kernel Bugs
  • From: James Bottomley
• Re: [BUG] New Kernel Bugs
  • From: Alan Cox
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Alan Cox
• Re: [BUG] New Kernel Bugs
  • From: Giacomo A. Catenazzi
• Re: [BUG] New Kernel Bugs
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  • From: Alan Cox
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [PATCH] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  • From: Mark Lord
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [PATCH] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Ingo Molnar
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: [BUG] New Kernel Bugs
  • From: Jarek Poplawski
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• Re: [PATCH 1/13] serverworks: cleanup ->set_dma_mode method
  • From: Sergei Shtylyov
• Re: [PATCH 12/13] ide: move drive->using_dma check to callers of ->dma_host_on method
  • From: Sergei Shtylyov
• Re: [BUG] New Kernel Bugs
  • From: Jens Axboe
• Re: [PATCH 7/13] icside: add ide_toggle_bounce() calls
  • From: Sergei Shtylyov
• Re: [PATCH 6/13] sgiioc4: add ide_toggle_bounce() calls
  • From: Sergei Shtylyov
• Re: [PATCH 8/13] au1xxx-ide: add ide_toggle_bounce() calls
  • From: Sergei Shtylyov
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Srihari Vijayaraghavan
• Re: [PATCH 3/13] ide: (hopefully) fix VDMA for CS5520
  • From: Sergei Shtylyov
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: pata_serverworks hangs
  • From: Krzysztof Oledzki
• Re: [PATCH 2/13] ide-disk: add idedisk_set_doorlock() helper
  • From: Sergei Shtylyov
• Re: [PATCH] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  • From: Tejun Heo
• [PATCH] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  • From: Albert Lee
• Re: ATA tape drive STT3401A needs DRQ HSM workaround too
  • From: Albert Lee
• RE: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Allen Martin
• [BUG] New Kernel Bugs
  • From: Natalie Protasevich
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB
  • From: Tejun Heo
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB
  • From: Robert Hancock
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Tejun Heo
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB
  • From: Tejun Heo
• Re: libata , Silicon Image 3124
  • From: Tejun Heo
• What's needed for PMP support?
  • From: Tejun Heo
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Srihari Vijayaraghavan
• [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB
  • From: Robert Hancock
• [PATCH 13/13] ide: merge ->dma_host_{on,off} methods into ->dma_host_set method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/13] ide: move drive->using_dma check to callers of ->dma_host_on method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/13] atiixp: remove ->dma_host_on and ->dma_host_off methods
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/13] ide-cris: fix DMA methods
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 9/13] ide: remove ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/13] au1xxx-ide: add ide_toggle_bounce() calls
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/13] sgiioc4: add ide_toggle_bounce() calls
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/13] icside: add ide_toggle_bounce() calls
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/13] cy82c693: add ->set_dma_mode method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/13] cy82c693: correct DMA modes clipping
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/13] ide: (hopefully) fix VDMA for CS5520
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/13] ide-disk: add idedisk_set_doorlock() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/13] serverworks: cleanup ->set_dma_mode method
  • From: Bartlomiej Zolnierkiewicz
• Re: Delkin Cardbus IDE, a.k.a. ASKA "Ninja" chipset
  • From: Mark Lord
• Re: Hang during boot in piix_init_pcs (ata_piix.c) with macbook pro
  • From: Thomas Rohwer
• Re: Delkin Cardbus IDE, a.k.a. ASKA "Ninja" chipset
  • From: Alan Cox
• Re: Delkin Cardbus IDE, a.k.a. ASKA "Ninja" chipset
  • From: Mark Lord
• Re: Delkin Cardbus IDE, a.k.a. ASKA "Ninja" chipset
  • From: Mark Lord
• Delkin Cardbus IDE, a.k.a. ASKA "Ninja" chipset
  • From: Mark Lord
• Re: Promise SATA TX4 300 port timeout with sata_promise in 2.6.22, kernel panic in 2.6.23
  • From: Peter Favrholdt
• libata , Silicon Image 3124
  • From: Kasimir Müller
• Re: [PATCH 8/9] ide-disk: add ide_tf_set_cmd() helper
  • From: Sergei Shtylyov
• Re: [PATCH 5/9] ide: use ->data_phase to set ->handler in do_rw_taskfile()
  • From: Sergei Shtylyov
• Re: possibly a dumb question about sb600/700
  • From: Alan Cox
• Re: Hang during boot in piix_init_pcs (ata_piix.c) with macbook pro
  • From: Tejun Heo
• Re: [2.6 patch] libata: remove unused functions
  • From: Tejun Heo
• Re: possibly a dumb question about sb600/700
  • From: Tejun Heo
• Re: possibly a dumb question about sb600/700
  • From: Alan Cox
• Re: question about sata-error on boot.
  • From: Tejun Heo
• Re: possibly a dumb question about sb600/700
  • From: Tejun Heo
• Re: possibly a dumb question about sb600/700
  • From: Alan Cox
• Re: Promise SATA TX4 300 port timeout with sata_promise in 2.6.22, kernel panic in 2.6.23
  • From: Tejun Heo
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Srihari Vijayaraghavan
• Re: Promise SATA TX4 300 port timeout with sata_promise in 2.6.22, kernel panic in 2.6.23
  • From: Mikael Pettersson
• possibly a dumb question about sb600/700
  • From: Tejun Heo
• [PATCH] ata_piix: add SATELLITE U205 to broken suspend list
  • From: Tejun Heo
• Re: Promise SATA TX4 300 port timeout with sata_promise in 2.6.22, kernel panic in 2.6.23
  • From: Tejun Heo
• Re: Promise SATA TX4 300 port timeout with sata_promise in 2.6.22, kernel panic in 2.6.23
  • From: Patric Karlsson
• Re: Promise SATA TX4 300 port timeout with sata_promise in 2.6.22, kernel panic in 2.6.23
  • From: Tejun Heo
• Re: SATA eating my disk, port reset, destroying unrelated data
  • From: Tejun Heo
• Re: 2.6.24-rc1: pata_amd fails to detect 80-pin wire
  • From: Tejun Heo
• Re: AHCI + ST3160023AS + NCQ problems
  • From: Tejun Heo
• Re: only one drive in a port multiplier system is being recognized
  • From: Tejun Heo
• Re: linux-ata.org contributions
  • From: Tejun Heo
• Re: linux-ata.org contributions
  • From: Jeff Garzik
• Re: linux-ata.org contributions
  • From: Tejun Heo
• Re: [PATCH] cmd64x: don't clear the other channels interrupt
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.24-rc1: pata_acpi fails to activate DMA for DVD-ROM on ALi M5229 secondary channel
  • From: Alan Cox
• Re: 2.6.24-rc1: pata_acpi fails to activate DMA for DVD-ROM on ALi M5229 secondary channel
  • From: Andrey Borzenkov
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Matthias Schniedermeyer
• Hang during boot in piix_init_pcs (ata_piix.c) with macbook pro
  • From: Thomas Rohwer
• Re: linux-ata.org contributions
  • From: James Andrewartha
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Thorsten Leemhuis
• Tejun collecting libata patches this week
  • From: Jeff Garzik
• [2.6 patch] libata: remove unused functions
  • From: Adrian Bunk
• Re: cd/dvd inaccessible in 2.6.24-rc2
  • From: Andrew Morton
• Re: cd/dvd inaccessible in 2.6.24-rc2
  • From: Jeff Garzik
• Re: cd/dvd inaccessible in 2.6.24-rc2
  • From: Jeff Garzik
• Re: linux-ata.org contributions
  • From: Alan Cox
• Re: cd/dvd inaccessible in 2.6.24-rc2
  • From: Alan Cox
• Re: linux-ata.org contributions
  • From: Jeff Garzik
• Re: linux-ata.org contributions
  • From: Alan Cox
• Re: cd/dvd inaccessible in 2.6.24-rc2
  • From: Andrew Morton
• Re: linux-ata.org contributions
  • From: Jeff Garzik
• linux-ata.org contributions
  • From: Jeff Garzik
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Jeff Garzik
• Re: [PATCH] sata_nv,ahci: add the ahci legacy mode support to sata_nv
  • From: Robert Hancock
• RE: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Allen Martin
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Matthias Schniedermeyer
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Mark Lord
• Promise SATA TX4 300 port timeout with sata_promise in 2.6.22, kernel panic in 2.6.23
  • From: I Stratford
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Matthias Schniedermeyer
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Matthias Schniedermeyer
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH] Don't fail ata device revalidation for bad _GTF methods
  • From: Jeff Garzik
• Re: [PATCH] sata_nv,ahci: add the ahci legacy mode support to sata_nv
  • From: Jeff Garzik
• Re: [PATCH] sata_nv,ahci: add the ahci legacy mode support to sata_nv
  • From: Jeff Garzik
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Jeff Garzik
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Theodore Tso
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Jeff Garzik
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Jeff Garzik
• Re: FIS structure and Command List structure for AHCI SATA controller
  • From: Jeff Garzik
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Matthias Schniedermeyer
• Correction Re: Bug is fixed in 2.6.23.1: sata_promise: port is slow to respond, reset failed
  • From: Peter Favrholdt
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Riki Oktarianto
• Re: [PATCH 10/15] ide: add ide_pktcmd_tf_load() helper
  • From: Sergei Shtylyov
• Re: [PATCH 4/9] ide: convert do_rw_taskfile() to use ->data_phase
  • From: Sergei Shtylyov
• Re: [PATCH 1/8] alim15x3: PIO fallback fix
  • From: Sergei Shtylyov
• Re: libata: cdrw/dvdrom disabed after s2ram (2.6.24-rc2)
  • From: Roberto Oppedisano
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Arjan van de Ven
• Re: pata_serverworks hangs
  • From: Krzysztof Oledzki
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Török Edwin
• Re: pata_serverworks hangs
  • From: Krzysztof Oledzki
• Re: [PATCH 12/18] sis5513: factor out UDMA programming code
  • From: Sergei Shtylyov
• Re: [PATCH 6/18] ide: fix registers loading order in ide_dump_ata_status()
  • From: Sergei Shtylyov
• Re: [PATCH 7/9] ide-disk: extend timeout for PIO-in commands
  • From: Sergei Shtylyov
• Re: [PATCH 3/9] ide: merge flagged_taskfile() into do_rw_taskfile()
  • From: Sergei Shtylyov
• Re: [PATCH 15/15] ide: remove 'tf_in_flags' field from ide_task_t
  • From: Sergei Shtylyov
• Re: [PATCH 8/15] ide-cd: fix register loading order in cdrom_start_packet_command()
  • From: Sergei Shtylyov
• Re: [PATCH 3/15] ide: remove ata_status_t and atapi_status_t
  • From: Sergei Shtylyov
• Re: FIS structure and Command List structure for AHCI SATA controller
  • From: mike zheng
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Riki Oktarianto
• Re: [PATCH] Don't fail ata device revalidation for bad _GTF methods
  • From: Roberto Oppedisano
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Alan Cox
• [PATCH] cmd64x: don't clear the other channels interrupt
  • From: Sergei Shtylyov
• Re: [PATCH 7/18] ide: add ide_tf_read() helper
  • From: Sergei Shtylyov
• Re: Bart's efforts?
  • From: Mikael Pettersson
• [2.6 patch] BLK_DEV_IDECD help: remove outdated note
  • From: Adrian Bunk
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Jeff Garzik
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Mark Lord
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Tejun Heo
• Re: FIS structure and Command List structure for AHCI SATA controller
  • From: Jeff Garzik
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Jeff Garzik
• FIS structure and Command List structure for AHCI SATA controller
  • From: mike zheng
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Mark Lord
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Jeff Garzik
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libata: skip 0xff polling for PATA controllers
  • From: Tejun Heo
• Re: sata NCQ blacklist entry
  • From: Luca Tettamanti
• Re: sata NCQ blacklist entry
  • From: Robert Hancock
• 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Srihari Vijayaraghavan
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Alan Cox
• Re: SATA Target mode & libata
  • From: Jeff Garzik
• SATA Target mode & libata
  • From: Mark Lord
• Re: Acard ATP8620 2SATA / 1 IDE driver - AHCI.C Nov082007
  • From: Jeff Garzik
• Re: sata NCQ blacklist entry
  • From: Luca Tettamanti
• Re: Acard ATP8620 2SATA / 1 IDE driver - AHCI.C Nov082007
  • From: Mark Lord
• Re: Acard ATP8620 2SATA / 1 IDE driver - AHCI.C Nov082007
  • From: Jeff Garzik
• Re: libata: cdrw/dvdrom disabed after s2ram (2.6.24-rc2)
  • From: Andrew Morton
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Denys Fedoryshchenko
• Re: Acard ATP8620 2SATA / 1 IDE driver - AHCI.C Nov082007
  • From: Mark Lord
• Re: libata: cdrw/dvdrom disabed after s2ram (2.6.24-rc2)
  • From: Mark Lord
• Re: libata: cdrw/dvdrom disabed after s2ram (2.6.24-rc2)
  • From: Andrew Morton
• [PATCH] Don't fail ata device revalidation for bad _GTF methods
  • From: Matthew Garrett
• Re: libata: cdrw/dvdrom disabed after s2ram (2.6.24-rc2)
  • From: Matthew Garrett
• Re: libata: cdrw/dvdrom disabed after s2ram (2.6.24-rc2)
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: port and host should be stopped before hardware resources are released
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: skip 0xff polling for PATA controllers
  • From: Jeff Garzik
• Re: [PATCH 1/2 take #2] libata: Support PIO polling-only hosts.
  • From: Jeff Garzik
• Re: [PATCH 2/4] libata sata_qstor nuke idle state
  • From: Jeff Garzik
• Re: libata: cdrw/dvdrom disabed after s2ram (2.6.24-rc2)
  • From: Andrew Morton
• Re: [PATCH] ata_piix: add SATELLITE PRO U200 to broken suspend list
  • From: Jeff Garzik
• Re: libata: cdrw/dvdrom disabed after s2ram (2.6.24-rc2)
  • From: Jeff Garzik
• Re: libata: cdrw/dvdrom disabed after s2ram (2.6.24-rc2)
  • From: Andrew Morton
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Jeff Garzik
• Re: libata: cdrw/dvdrom disabed after s2ram (2.6.24-rc2)
  • From: Roberto Oppedisano
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Denys Fedoryshchenko
• Re: Acard ATP8620 2SATA / 1 IDE driver - AHCI.C Nov082007
  • From: Jeff Garzik
• Re: [PATCH] Re: Should be Acard ATP8620 2SATA / 1 IDE driver
  • From: Jeff Garzik
• Re: [PATCH 8/18] ide-disk: use ide_get_lba_addr()
  • From: Sergei Shtylyov
• Re: [PATCH 1/4] libata sata_qstor fix oops on rmmod
  • From: Mark Lord
• Re: [PATCH 15/18] sc1200: move DMA timings to timing tables
  • From: Sergei Shtylyov
• Re: [PATCH #upstream-fixes] libata: skip 0xff polling for PATA controllers
  • From: Mark Lord
• Re: [PATCH 17/18] ide: cleanup ide_set_dma()
  • From: Sergei Shtylyov
• Re: [PATCH] Re: Should be Acard ATP8620 2SATA / 1 IDE driver
  • From: jameshsu
• Re:Acard ATP8620 2SATA / 1 IDE driver - AHCI.C Nov082007
  • From: jameshsu
• Re: [PATCH 13/15] ide: remove hwif->intrproc
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libata: skip 0xff polling for PATA controllers
  • From: Alan Cox
• Re: [PATCH 1/2 take #2] libata: Support PIO polling-only hosts.
  • From: Alan Cox
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Alan Cox
• Re: [PATCH 13/15] ide: remove hwif->intrproc
  • From: Alan Cox
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Denys Fedoryshchenko
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Denys Fedoryshchenko
• [PATCH #upstream-fixes] libata: port and host should be stopped before hardware resources are released
  • From: Tejun Heo
• Re: [PATCH 13/15] ide: remove hwif->intrproc
  • From: Tejun Heo
• Re: [PATCH 1/4] libata sata_qstor fix oops on rmmod
  • From: Tejun Heo
• [PATCH #upstream-fixes] libata: skip 0xff polling for PATA controllers
  • From: Tejun Heo
• [PATCH 2/2 take #2] libata: pata_platform: Support polling-mode configuration.
  • From: Paul Mundt
• [PATCH 1/2 take #2] libata: Support PIO polling-only hosts.
  • From: Paul Mundt
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Robert Hancock
• Re: [PATCH 13/15] ide: remove hwif->intrproc
  • From: Mark Lord
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Bartlomiej Zolnierkiewicz
• Re: SATA eating my disk, port reset, destroying unrelated data
  • From: Robert Hancock
• Re: sata NCQ blacklist entry
  • From: Robert Hancock
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Denys Fedoryshchenko
• Re: [PATCH 4/4] libata sata_qstor conversion to new error handling (EH).
  • From: Mark Lord
• Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
  • From: Denys Fedoryshchenko
• Re: [PATCH 4/4] libata sata_qstor conversion to new error handling (EH).
  • From: Jeff Garzik
• Re: [PATCH 4/4] libata sata_qstor conversion to new error handling (EH).
  • From: Mark Lord
• Re: Bart's efforts?
  • From: Mark Lord
• Re: [PATCH 4/4] libata sata_qstor conversion to new error handling (EH).
  • From: Mark Lord
• Re: Bart's efforts?
  • From: Alan Cox
• Re: Bart's efforts?
  • From: Mark Lord
• Re: [PATCH 4/4] libata sata_qstor conversion to new error handling (EH).
  • From: Jeff Garzik