Linux IDE Archive

• Thread Index

• Re: [PATCH 01/14] libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size
  • From: Alan Cox
• Re: [PATCH 03/14] libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_*
  • From: Alan Cox
• Re: [PATCH 05/13] libata: improve ATAPI draining
  • From: Tejun Heo
• [PATCH 10/14] libata: convert to chained sg
  • From: Tejun Heo
• [PATCH 11/14] libata: add qc->dma_nbytes
  • From: Tejun Heo
• [PATCH 12/14] libata: implement ATAPI drain buffer
  • From: Tejun Heo
• [PATCH 05/14] libata: make ->data_xfer return the number of consumed bytes
  • From: Tejun Heo
• [PATCH 09/14] libata: change ATA_QCFLAG_DMAMAP semantics
  • From: Tejun Heo
• [PATCH 07/14] libata: make atapi_request_sense() use sg
  • From: Tejun Heo
• [PATCH 14/14] libata: use PIO for misc ATAPI commands
  • From: Tejun Heo
• [PATCH 13/14] libata: implement ATAPI per-command-type DMA horkages
  • From: Tejun Heo
• [PATCH 04/14] libata: add ATAPI_* cmd types and implement atapi_cmd_type()
  • From: Tejun Heo
• [PATCH 02/14] cdrom: add more GPCMD_* constants
  • From: Tejun Heo
• [PATCH 08/14] libata: kill non-sg DMA interface
  • From: Tejun Heo
• [PATCH 06/14] libata: improve ATAPI draining
  • From: Tejun Heo
• [PATCH 03/14] libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_*
  • From: Tejun Heo
• [PATCH 01/14] libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size
  • From: Tejun Heo
• [PATCHSET] libata: improve ATAPI data transfer handling, take #2
  • From: Tejun Heo
• Issuing a vendor specific ATA cmd on SATA Disk via ATA Pass Thru
  • From: sam song
• [PATCH 1/1] Several fixes for the AVR32 PATA driver
  • From: Kristoffer Nyborg Gregertsen
• Re: 2.6.24-rc3-mm2: Result: hostbyte=0x01 driverbyte=0x00\nend_request: I/O error
  • From: Boaz Harrosh
• Re: [PATCH] [libata] Set proper ATA UDMA mode for bf548 according to system clock.
  • From: Alan Cox
• Re: [PATCH 05/13] libata: improve ATAPI draining
  • From: Tejun Heo
• Re: [PATCH] [libata] Set proper ATA UDMA mode for bf548 according to system clock.
  • From: Sonic Zhang
• Re: [PATCH 05/13] libata: improve ATAPI draining
  • From: Albert Lee
• Re: SATA Shutdown issue confuses (sda)
  • From: Dark Sylinc
• Re: SATA PMP support in 2.6.24-rc3?
  • From: Tom Evans
• Re: SATA Shutdown issue confuses (sda)
  • From: Tejun Heo
• Re: SATA Shutdown issue confuses (sda)
  • From: Dark Sylinc
• Re: SATA Shutdown issue confuses (sda)
  • From: Tejun Heo
• Re: [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Anton Vorontsov
• [PATCH 8/8] ide: make CONFIG_IDEPCI_PCIBUS_ORDER visible and deprecate it
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/8] ide: move CONFIG_IDEPCI_PCIBUS_ORDER code to ide-scan-pci.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/8] ide: coding style fixes for drivers/ide/setup-pci.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/8] ide: fix ide_scan_pcibus() error message
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/8] ide: print banner message once per controller in m68k host drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/8] ide: deprecate CONFIG_BLK_DEV_OFFBOARD
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/8] ide: add ide_set_irq() inline helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/8] ide: add missing checks for control register existence
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.24-rc3-mm2: Result: hostbyte=0x01 driverbyte=0x00\nend_request: I/O error
  • From: Andrew Morton
• [stable patch] backport of "be tolerant of 12-byte ATAPI commands in 16-byte CDBs"
  • From: Chuck Ebbert
• Re: 2.6.24-rc3-mm2: Result: hostbyte=0x01 driverbyte=0x00\nend_request: I/O error
  • From: Matthew Wilcox
• Re: 2.6.24-rc3-mm2: Result: hostbyte=0x01 driverbyte=0x00\nend_request: I/O error
  • From: Alan Cox
• Re: 2.6.24-rc3-mm2: Result: hostbyte=0x01 driverbyte=0x00\nend_request: I/O error
  • From: Andrew Morton
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Laurent Riffard
• Re: [PATCH 1/6] au1xxx-ide: au_ide_probe() fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: SATA Shutdown issue confuses (sda)
  • From: Dark Sylinc
• Re: Flexible SFF interrupt handling
  • From: Mark Lord
• Re: Flexible SFF interrupt handling
  • From: Mark Lord
• Re: [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Sergei Shtylyov
• Re: [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Sergei Shtylyov
• Re: Flexible SFF interrupt handling
  • From: Jeff Garzik
• Re: sata_mv fixes: coding style preference?
  • From: Jeff Garzik
• Re: Flexible SFF interrupt handling
  • From: Jeff Garzik
• Re: [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Anton Vorontsov
• Re: Flexible SFF interrupt handling
  • From: Alan Cox
• Re: Flexible SFF interrupt handling
  • From: Mark Lord
• Re: sata_mv fixes: coding style preference?
  • From: Mark Lord
• [PATCH] libata: report protocol and full CDB on error
  • From: Tejun Heo
• Re: laptop reboots right after hibernation
  • From: Mark Lord
• Re: laptop reboots right after hibernation
  • From: Jeff Garzik
• Flexible SFF interrupt handling
  • From: Jeff Garzik
• Re: laptop reboots right after hibernation
  • From: Tejun Heo
• Re: [PATCH 0/3] OF-platform PATA driver
  • From: Anton Vorontsov
• Re: [PATCH] pata_ali: Lots of problems still showing up with small ATAPI DMA
  • From: Alan Cox
• Re: Current sata_inic attempts (was pata_pcmcia: Minor cleanups and support for dual channel cards)
  • From: Alan Cox
• Re: laptop reboots right after hibernation
  • From: Kjartan Maraas
• Re: [PATCH 1/6] au1xxx-ide: au_ide_probe() fixes
  • From: Sergei Shtylyov
• Re: [PATCH 2/6] au1xxx-ide: use ide_init_port_hw()
  • From: Sergei Shtylyov
• Re: [PATCH 3/6] ide: always use ide_std_init_ports() in setup-pci.c
  • From: Sergei Shtylyov
• Re: [PATCH 6/6] ide-pmac: use custom hwif->sg_max_nents only if DMA support is enabled
  • From: Sergei Shtylyov
• Re: [PATCH 5/6] rapide: remove write-only hwif->hwif_data
  • From: Sergei Shtylyov
• Re: Current sata_inic attempts (was pata_pcmcia: Minor cleanups and support for dual channel cards)
  • From: Tejun Heo
• Re: [PATCH] pata_ali: Lots of problems still showing up with small ATAPI DMA
  • From: Tejun Heo
• Re: laptop reboots right after hibernation
  • From: Tomas Carnecky
• Re: [PATCH 0/3] OF-platform PATA driver
  • From: Paul Mundt
• Current sata_inic attempts (was pata_pcmcia: Minor cleanups and support for dual channel cards)
  • From: Alan Cox
• Re: [PATCH] pata_ali: Lots of problems still showing up with small ATAPI DMA
  • From: Alan Cox
• Re: [PATCH 6/8] libata: adjust speed down rules
  • From: Tejun Heo
• Re: laptop reboots right after hibernation
  • From: Tejun Heo
• Re: SATA Shutdown issue confuses (sda)
  • From: Tejun Heo
• Re: [PATCH] [libata] sata_mv: fix compilation error when enabling DEBUG
  • From: Tejun Heo
• My name is Sumiko
  • From: Maritza Gomez
• Re: [PATCH] pata_pcmcia: Minor cleanups and support for dual channel cards
  • From: Tejun Heo
• Re: Possibly SATA related freeze killed networking and RAID
  • From: Tejun Heo
• Re: [PATCH] pata_ali: Lots of problems still showing up with small ATAPI DMA
  • From: Tejun Heo
• Re: SATA PMP support in 2.6.24-rc3?
  • From: Tejun Heo
• Re: sata_sil issue on 2.6.22
  • From: Tejun Heo
• Re: [PATCH 6/8] libata: adjust speed down rules
  • From: Mark Lord
• Re: laptop reboots right after hibernation
  • From: Tejun Heo
• Re: [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Stephen Rothwell
• Re: spurious completions during NCQ on rt kernel
  • From: Tejun Heo
• Re: [PATCH 13/13] libata: use PIO for misc ATAPI commands
  • From: Tejun Heo
• Re: [PATCH 6/6] ide-pmac: use custom hwif->sg_max_nents only if DMA support is enabled
  • From: Benjamin Herrenschmidt
• Re: [PATCH 6/8] libata: adjust speed down rules
  • From: Tejun Heo
• Re: [PATCH 13/13] libata: use PIO for misc ATAPI commands
  • From: Mark Lord
• Re: [PATCH 6/8] libata: adjust speed down rules
  • From: Mark Lord
• Re: [PATCH 13/13] libata: use PIO for misc ATAPI commands
  • From: Mark Lord
• Re: [PATCH 6/8] libata: adjust speed down rules
  • From: Tejun Heo
• Re: [PATCH 13/13] libata: use PIO for misc ATAPI commands
  • From: Tejun Heo
• [PATCH 6/6] ide-pmac: use custom hwif->sg_max_nents only if DMA support is enabled
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/6] ide: use ide_init_port_hw() in setup-pci.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/6] rapide: remove write-only hwif->hwif_data
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/6] ide: always use ide_std_init_ports() in setup-pci.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/6] au1xxx-ide: use ide_init_port_hw()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/6] au1xxx-ide: au_ide_probe() fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 6/8] libata: adjust speed down rules
  • From: Mark Lord
• Re: [PATCH 1/3] [libata] pata_platform: make probe and remove functions device type neutral
  • From: Arnd Bergmann
• Re: [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Arnd Bergmann
• Re: [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Olof Johansson
• Re: [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes
  • From: Kumar Gala
• Re: [PATCH 2/2] ide-scsi: use print_hex_dump from <linux/kernel.h>
  • From: Bartlomiej Zolnierkiewicz
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] ide-scsi: use print_hex_dump from <linux/kernel.h>
  • From: Bartlomiej Zolnierkiewicz
• SATA Shutdown issue confuses (sda)
  • From: Dark Sylinc
• Re: [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes
  • From: Anton Vorontsov
• Re: [PATCH 2/2] ide-scsi: use print_hex_dump from <linux/kernel.h>
  • From: Joe Perches
• Re: [PATCH 2/21] ide: merge ->fixup and ->quirkproc methods
  • From: Sergei Shtylyov
• Re: [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes
  • From: Sergei Shtylyov
• Re: [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes
  • From: Anton Vorontsov
• Re: [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes
  • From: Sergei Shtylyov
• Re: [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes
  • From: Anton Vorontsov
• Re: [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes
  • From: Sergei Shtylyov
• Re: [PATCH 10/13] libata: add qc->dma_nbytes
  • From: Alan Cox
• Re: [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes
  • From: Anton Vorontsov
• Re: [PATCH 13/13] libata: use PIO for misc ATAPI commands
  • From: Alan Cox
• Re: [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes
  • From: Sergei Shtylyov
• Re: [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes
  • From: Anton Vorontsov
• [PATCH] [libata] sata_mv: fix compilation error when enabling DEBUG
  • From: Saeed Bishara
• Re: [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes
  • From: Sergei Shtylyov
• [PATCH] [libata] sata_mv: fix compilation error when enabling DEBUG
  • From: Saeed Bishara
• [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes
  • From: Anton Vorontsov
• [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Anton Vorontsov
• [PATCH 1/3] [libata] pata_platform: make probe and remove functions device type neutral
  • From: Anton Vorontsov
• [PATCH 0/3] OF-platform PATA driver
  • From: Anton Vorontsov
• program to test various ATAPI transfer lengths (and brasero bugs)
  • From: Tejun Heo
• [PATCH 12/13] libata: implement ATAPI per-command-type DMA horkages
  • From: Tejun Heo
• [PATCH 13/13] libata: use PIO for misc ATAPI commands
  • From: Tejun Heo
• [PATCH 09/13] libata: convert to chained sg
  • From: Tejun Heo
• [PATCH 11/13] libata: implement ATAPI drain buffer
  • From: Tejun Heo
• [PATCH 07/13] libata: kill non-sg DMA interface
  • From: Tejun Heo
• [PATCH 05/13] libata: improve ATAPI draining
  • From: Tejun Heo
• [PATCH 10/13] libata: add qc->dma_nbytes
  • From: Tejun Heo
• [PATCH 08/13] libata: change ATA_QCFLAG_DMAMAP semantics
  • From: Tejun Heo
• [PATCH 06/13] libata: make atapi_request_sense() use sg
  • From: Tejun Heo
• [PATCH 02/13] cdrom: add more GPCMD_* constants
  • From: Tejun Heo
• [PATCHSET] libata: improve ATAPI data transfer handling
  • From: Tejun Heo
• [PATCH 04/13] libata: add ATAPI_* cmd types and implement atapi_cmd_type()
  • From: Tejun Heo
• [PATCH 03/13] libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_*
  • From: Tejun Heo
• [PATCH 01/13] libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size
  • From: Tejun Heo
• Re: [PATCH 04/12] libata: kill ata_id_to_dma_mode()
  • From: Tejun Heo
• Re: [PATCH 16/21] ide: add ide_init_port_hw() helper
  • From: Sergei Shtylyov
• RE: [PATCH 7/21] ide-cris: don't override ide_register_hw() result
  • From: Mikael Starvik
• Re: [PATCH 19/21] cmd640: fix dependency on IDE_GENERIC
  • From: Sergei Shtylyov
• Re: [PATCH 7/21] ide-cris: don't override ide_register_hw() result
  • From: Sergei Shtylyov
• Re: [PATCH 15/21] sgiioc4: always init hwif->io_ports
  • From: Sergei Shtylyov
• Re: [PATCH 13/21] ide: add hwif->chipset fixup to ide_device_add()
  • From: Sergei Shtylyov
• Re: [PATCH 11/21] rapide: set hwif->chipset
  • From: Sergei Shtylyov
• Re: [PATCH 04/12] libata: kill ata_id_to_dma_mode()
  • From: Alan Cox
• Re: [PATCH 12/12] pata_amd: update mode selection for NV PATAs
  • From: Alan Cox
• [PATCH 03/12] libata: clean up xfermode / PATA timing related stuff
  • From: Tejun Heo
• [PATCH 11/12] libata: add ATA_CBL_PATA_IGN
  • From: Tejun Heo
• [PATCH 09/12] libata: implement ata_acpi_init_gtm()
  • From: Tejun Heo
• [PATCH 10/12] libata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask()
  • From: Tejun Heo
• [PATCH 12/12] pata_amd: update mode selection for NV PATAs
  • From: Tejun Heo
• [PATCH 08/12] libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi
  • From: Tejun Heo
• [PATCH 07/12] libata: fix ata_acpi_gtm_xfermask()
  • From: Tejun Heo
• [PATCH 06/12] libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes()
  • From: Tejun Heo
• [PATCH 04/12] libata: kill ata_id_to_dma_mode()
  • From: Tejun Heo
• [PATCH 05/12] libata: xfer_mask is unsigned long not unsigned int
  • From: Tejun Heo
• [PATCHSET] libata: improve timing code and fix pata_amd transfer mode selection, take #2
  • From: Tejun Heo
• [PATCH 02/12] libata: export xfermode / PATA timing related functions
  • From: Tejun Heo
• [PATCH 01/12] ata_generic: unindent loop in generic_set_mode()
  • From: Tejun Heo
• [PATCH 7/8] libata: implement ATA_DFLAG_DUBIOUS_XFER
  • From: Tejun Heo
• [PATCH 8/8] libata: implement fast speed down for unverified data transfer mode
  • From: Tejun Heo
• [PATCH 6/8] libata: adjust speed down rules
  • From: Tejun Heo
• [PATCH 5/8] libata: clean up EH speed down implementation
  • From: Tejun Heo
• [PATCH 4/8] libata: move ata_set_mode() to libata-eh.c
  • From: Tejun Heo
• [PATCH 2/8] libata: implement protocol tests
  • From: Tejun Heo
• [PATCH 1/8] libata: rearrange ATA_DFLAG_*
  • From: Tejun Heo
• [PATCH 3/8] libata: factor out ata_eh_schedule_probe()
  • From: Tejun Heo
• [PATCHSET] libata: improve EH speed down logic, take #3
  • From: Tejun Heo
• Re: Acard ATP8620 2SATA / 1 IDE driver - AHCI.C Nov082007
  • From: jameshsu
• Re: [PATCH 2/2] ide-scsi: use print_hex_dump from <linux/kernel.h>
  • From: Andrew Morton
• Re: [PATCH 05/12] libata: xfer_mask is unsigned int not unsigned long
  • From: Tejun Heo
• Re: [PATCH 07/12] libata: fix ata_acpi_gtm_xfermask()
  • From: Tejun Heo
• [PATCH] [libata] Set proper ATA UDMA mode for bf548 according to system clock.
  • From: sonic zhang
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Rafael J. Wysocki
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Adrian Bunk
• Re: [PATCH 2/2] ide-scsi: use print_hex_dump from <linux/kernel.h>
  • From: Randy Dunlap
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH] [libata] Return proper ATA INT status in pata_bf54x driver.
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: bump transfer chunk size if it's odd
  • From: Jeff Garzik
• Re: [PATCH] pata_pcmcia: Minor cleanups and support for dual channel cards
  • From: Alan Cox
• Re: [PATCH 2/2] ide-scsi: use print_hex_dump from <linux/kernel.h>
  • From: Matthew Wilcox
• Re: [PATCH RFC] sata_promise: make pdc_atapi_pkt() use values from qc->tf
  • From: Tejun Heo
• Re: Possibly SATA related freeze killed networking and RAID
  • From: Pavel Machek
• Re: [PATCH RFC] sata_promise: make pdc_atapi_pkt() use values from qc->tf
  • From: Mikael Pettersson
• [PATCH #upstream-fixes] libata: bump transfer chunk size if it's odd
  • From: Tejun Heo
• [PATCH RFC] sata_promise: make pdc_atapi_pkt() use values from qc->tf
  • From: Tejun Heo
• [PATCH] [libata] Return proper ATA INT status in pata_bf54x driver.
  • From: sonic zhang
• Re: [PATCH 2/2] ide-scsi: use print_hex_dump from <linux/kernel.h>
  • From: rae l
• RE: Lost interrupt with cmd 64x
  • From: Tobias Oed
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Hannes Reinecke
• [PATCH 2/2] ide-scsi: use print_hex_dump from <linux/kernel.h>
  • From: Denis Cheng
• Re: spurious completions during NCQ on rt kernel
  • From: Mark Lord
• Re: [PATCH] sata_nv: don't use legacy DMA in ADMA mode (v3)
  • From: Tejun Heo
• Re: [RFC][PATCH 0/3] OF-platform PATA driver
  • From: Paul Mundt
• Re: "buggy cmd640" message followed by soft lockup
  • From: Frans Pop
• Re: [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce pata node, make use pata_of_platform driver
  • From: Anton Vorontsov
• Re: [RFC][PATCH 0/3] OF-platform PATA driver
  • From: Anton Vorontsov
• Re: [RFC][PATCH 0/3] OF-platform PATA driver
  • From: Anton Vorontsov
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Rafael J. Wysocki
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Adrian Bunk
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Rafael J. Wysocki
• [PATCH] sata_nv: don't use legacy DMA in ADMA mode (v3)
  • From: Robert Hancock
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Adrian Bunk
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Rafael J. Wysocki
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Rafael J. Wysocki
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Adrian Bunk
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Rafael J. Wysocki
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Dr. David Alan Gilbert
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Laurent Riffard
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Adrian Bunk
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Rafael J. Wysocki
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Rafael J. Wysocki
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Bartlomiej Zolnierkiewicz
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Adrian Bunk
• Re: kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Rafael J. Wysocki
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: James Bottomley
• kernel bugzilla is FPOS (was: Re: "buggy cmd640" message followed by soft lockup)
  • From: Bartlomiej Zolnierkiewicz
• spurious completions during NCQ on rt kernel
  • From: jozwicki
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Laurent Riffard
• Re: [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce pata node, make use pata_of_platform driver
  • From: Arnd Bergmann
• Re: [RFC][PATCH 0/3] OF-platform PATA driver
  • From: Arnd Bergmann
• Re: "buggy cmd640" message followed by soft lockup
  • From: Rafael J. Wysocki
• Re: "buggy cmd640" message followed by soft lockup
  • From: Rafael J. Wysocki
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Gabriel C
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Gabriel C
• Re: sata NCQ blacklist entry
  • From: Rafael J. Wysocki
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: James Bottomley
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Gabriel C
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: James Bottomley
• Re: [PATCH] ata.h: Don't do a SATA check for 40wire_relaxed
  • From: Alan Cox
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: James Bottomley
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Laurent Riffard
• [PATCH] ata_piix: separate controller IDs into separate enum
  • From: Tejun Heo
• Re: [RFC][PATCH 0/3] OF-platform PATA driver
  • From: Paul Mundt
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: James Bottomley
• Re: [PATCH] sata_nv: don't use legacy DMA in ADMA mode (v2)
  • From: Tejun Heo
• Re: [PATCH] sata_nv: don't use legacy DMA in ADMA mode (v2)
  • From: Tejun Heo
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Tejun Heo
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Mark Lord
• Re: [RFC][PATCH 0/3] OF-platform PATA driver
  • From: Vitaly Bordug
• Re: [RFC][PATCH 0/3] OF-platform PATA driver
  • From: Benjamin Herrenschmidt
• Re: [PATCH] ata.h: Don't do a SATA check for 40wire_relaxed
  • From: Jeff Garzik
• Re: [PATCH] ata_piix: port enable for the first SATA controller of ICH8 is 0xf not 0x3
  • From: Jeff Garzik
• Re: [PATCH] ata_piix: only enable the first port on apple macbook pro
  • From: Jeff Garzik
• Re: [PATCH] ata_piix: reorganize controller IDs
  • From: Jeff Garzik
• Re: [PATCHSET] libata: update timing and fix pata_amd transfer mode selection
  • From: Jeff Garzik
• Re: [PATCH 08/12] libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi
  • From: Jeff Garzik
• Re: [PATCH 07/12] libata: fix ata_acpi_gtm_xfermask()
  • From: Jeff Garzik
• Re: [PATCH 06/12] libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes()
  • From: Jeff Garzik
• Re: [PATCH 04/12] libata: kill ata_id_to_dma_mode()
  • From: Jeff Garzik
• Re: [PATCH 05/12] libata: xfer_mask is unsigned int not unsigned long
  • From: Jeff Garzik
• Re: [PATCH 05/12] libata: xfer_mask is unsigned int not unsigned long
  • From: Jeff Garzik
• Re: [RFC 0/3] [SCSI/libata] libata EH conversion for ipr SAS
  • From: Jeff Garzik
• Re: [PATCHSET] libata: update EH speed down logic, take #2
  • From: Jeff Garzik
• Re: [PATCH #upstream] ahci: update PCS programming
  • From: Jeff Garzik
• Re: [PATCH] pata_ninja32: Cardbus ATA initial support
  • From: Jeff Garzik
• Re: [RFC][PATCH 0/3] OF-platform PATA driver
  • From: Jeff Garzik
• Re: [PATCH] pata_pcmcia: Minor cleanups and support for dual channel cards
  • From: Jeff Garzik
• Re: [PATCH] libata-sff: tf_load
  • From: Jeff Garzik
• Re: [PATCH] libata: IORDY handling
  • From: Jeff Garzik
• Re: [PATCH] pata_hpt37x: Fix cable detect bug spotted by Sergei
  • From: Jeff Garzik
• Re: [PATCH] pata_ali: Lots of problems still showing up with small ATAPI DMA
  • From: Jeff Garzik
• Re: [PATCH] pata_ali: Add Mitac 8317 and derivatives
  • From: Jeff Garzik
• Re: [PATCH] libata-core: List more documentation sources for reference
  • From: Jeff Garzik
• Re: [PATCH] ahci: Invalid use of writel/readl with iomap
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Robert Hancock
• Re: [PATCH #upstream-fixes] sata_sil24: fix sg table sizing
  • From: Jeff Garzik
• Re: [PATCH] pata_jmicron: fix disabled port handling in jmicron_pre_reset()
  • From: Jeff Garzik
• Re: [PATCH] pata_sil680: kill bogus reset code (take 2)
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Robert Hancock
• Re: sata NCQ blacklist entry
  • From: Jan-Simon Möller
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Mark Lord
• RE: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Morrison, Tom
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Laurent Riffard
• [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce pata node, make use pata_of_platform driver
  • From: Anton Vorontsov
• [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Anton Vorontsov
• [PATCH 1/3] [libata] pata_platform: make probe and remove functions device type neutral
  • From: Anton Vorontsov
• [RFC][PATCH 0/3] OF-platform PATA driver
  • From: Anton Vorontsov
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Mark Lord
• RE: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Morrison, Tom
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Mark Lord
• Re: Lost interrupt with cmd 64x
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: add TORiSAN model: CD-ROM CDR_U200 fw: 1.09 to DMA blacklist
  • From: Sergei Shtylyov
• Re: [PATCH] alim15x3: add Mitac 8317 and derivatives to ali_cable_override()
  • From: Sergei Shtylyov
• Re: [PATCH] piix: add HP compaq laptop to short cable list
  • From: Sergei Shtylyov
• Re: [PATCH] ide: remove bogus ide_fix_driveid() comment
  • From: Sergei Shtylyov
• Re: [PATCH] trm290: remove bogus init_hwif_trm290() comment
  • From: Sergei Shtylyov
• Re: [PATCH] ali14xx: constify __initdata
  • From: Sergei Shtylyov
• Re: Lost interrupt with cmd 64x
  • From: Sergei Shtylyov
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Hannes Reinecke
• Re: 2.6.24-rc2 displays incorrect DVD description
  • From: Ansgar Knappheide
• Re: 2.6.24-rc2 displays incorrect DVD description
  • From: Andrew Morton
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Hannes Reinecke
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Laurent Riffard
• Re: sata NCQ blacklist entry
  • From: Andrew Morton
• [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Robert Hancock
• [PATCH] sata_nv: don't use legacy DMA in ADMA mode (v2)
  • From: Robert Hancock
• Re: SATA port multiplier Identify/Fail LEDs: driver support
  • From: Richard Scobie
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v2)
  • From: Tejun Heo
• Re: [PATCHSET] libata: update timing and fix pata_amd transfer mode selection
  • From: Tejun Heo
• Re: [PATCHSET] libata: update EH speed down logic, take #2
  • From: Tejun Heo
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v2)
  • From: Robert Hancock
• Re: Problem with PCMCIA IDE
  • From: Bartlomiej Zolnierkiewicz
• Re: Lost interrupt with cmd 64x
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] piix: add HP compaq laptop to short cable list
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ali14xx: constify __initdata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: remove bogus ide_fix_driveid() comment
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] trm290: remove bogus init_hwif_trm290() comment
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] alim15x3: add Mitac 8317 and derivatives to ali_cable_override()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: add TORiSAN model: CD-ROM CDR_U200 fw: 1.09 to DMA blacklist
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 17/59] drivers/ide: Add missing "space"
  • From: Bartlomiej Zolnierkiewicz
• "buggy cmd640" message followed by soft lockup
  • From: Frans Pop
• [PATCH #upstream-fixes] sata_sil24: fix sg table sizing
  • From: Tejun Heo
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v2)
  • From: Tejun Heo
• Re: [PATCH] pata_jmicron: fix disabled port handling in jmicron_pre_reset()
  • From: Tejun Heo
• Re: SATA port multiplier Identify/Fail LEDs: driver support
  • From: Tejun Heo
• Re: [PATCH 1/2] sata_nv: don't use legacy DMA in ADMA mode
  • From: Tejun Heo
• Re: 2.6.24-rc3-mm1: I/O error, system hangs
  • From: Andrew Morton
• SATA PMP support in 2.6.24-rc3?
  • From: Gaston, Jason D
• Re: Possibly SATA related freeze killed networking and RAID
  • From: noah
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v2)
  • From: Robert Hancock
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v2)
  • From: Vincent Fortier
• Re: [PATCH 6/21] ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig
  • From: Sergei Shtylyov
• Re: [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 1/2] sata_nv: don't use legacy DMA in ADMA mode
  • From: Robert Hancock
• [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v2)
  • From: Robert Hancock
• Re: Possibly SATA related freeze killed networking and RAID
  • From: Alan Cox
• Re: [PATCH 6/21] ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig
  • From: Bartlomiej Zolnierkiewicz
• Re: Possibly SATA related freeze killed networking and RAID
  • From: noah
• Re: Possibly SATA related freeze killed networking and RAID
  • From: Alan Cox
• sata_sil issue on 2.6.22
  • From: Mark Paulus
• SATA port multiplier Identify/Fail LEDs: driver support
  • From: Jeremy Jackson
• Possibly SATA related freeze killed networking and RAID
  • From: noah
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM II
  • From: Jens Axboe
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Andi Kleen
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Thomas Gleixner
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM II
  • From: Andi Kleen
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Andi Kleen
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Thomas Gleixner
• Re: laptop reboots right after hibernation
  • From: Kjartan Maraas
• [PATCH] libata: blacklist TOSHIBA MK1637GSX
  • From: Konstantin A. Lepikhov
• 2.6.23.1 SATA disk not properly spun down
  • From: Filippo Zangheri
• Re: [PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3)
  • From: Tejun Heo
• Re: [PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3)
  • From: Robert Hancock
• [PATCH 17/59] drivers/ide: Add missing "space"
  • From: Joe Perches
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Tejun Heo
• Re: [PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3)
  • From: Tejun Heo
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Srihari Vijayaraghavan
• Re: [Bugme-new] [Bug 9410] New: TOSHIBA MK1637GSX do spurious command completion
  • From: Andrew Morton
• Re: [PATCH 6/21] ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig
  • From: Sergei Shtylyov
• Re: [PATCH 5/21] ide: add CONFIG_IDE_H8300 config option
  • From: Sergei Shtylyov
• Re: [PATCH 4/21] ide/Kconfig: fix mpc8xx host driver dependencies
  • From: Sergei Shtylyov
• Re: Process Scheduling Issue using sg/libata
  • From: Alan Cox
• Re: Process Scheduling Issue using sg/libata
  • From: Tejun Heo
• Re: Process Scheduling Issue using sg/libata
  • From: James Chapman
• [PATCH] ata.h: Don't do a SATA check for 40wire_relaxed
  • From: Alan Cox
• [PATCH] pata_ninja32: Cardbus ATA initial support
  • From: Alan Cox
• [PATCH] pata_pcmcia: Minor cleanups and support for dual channel cards
  • From: Alan Cox
• [PATCH] pata_hpt37x: Fix cable detect bug spotted by Sergei
  • From: Alan Cox
• [PATCH] pata_ali: Lots of problems still showing up with small ATAPI DMA
  • From: Alan Cox
• [PATCH] pata_ali: Add Mitac 8317 and derivatives
  • From: Alan Cox
• [PATCH] libata-sff: tf_load
  • From: Alan Cox
• [PATCH] libata: IORDY handling
  • From: Alan Cox
• [PATCH] libata-core: List more documentation sources for reference
  • From: Alan Cox
• [PATCH] ahci: Invalid use of writel/readl with iomap
  • From: Alan Cox
• Re: [PATCH] pata_platform: move ARCH_RPC to use MACH_HAS_PATA_PLATFORM
  • From: Ben Dooks
• Re: Hang during boot in piix_init_pcs (ata_piix.c) with macbook pro
  • From: Thomas Rohwer
• Re: Hang during boot in piix_init_pcs (ata_piix.c) with macbook pro
  • From: Tejun Heo
• Re: Hang during boot in piix_init_pcs (ata_piix.c) with macbook pro
  • From: Thomas Rohwer
• Re: [PATCH] pata_platform: move ARCH_RPC to use MACH_HAS_PATA_PLATFORM
  • From: Russell King - ARM Linux
• [PATCH] pata_platform: move ARCH_RPC to use MACH_HAS_PATA_PLATFORM
  • From: Ben Dooks
• [PATCH] pata_platfrom: add MACH_HAS_PATA_PLATFORM configuration
  • From: Ben Dooks
• Re: [PATCH 1/21] ide: dump taskfile HOB registers in ide_tf_load() (if DEBUG is defined)
  • From: Sergei Shtylyov
• Re: [PATCH 3/21] macide/q40ide: add missing __init tag to {macide,q40ide}_init()
  • From: Sergei Shtylyov
• [PATCH] pata_jmicron: fix disabled port handling in jmicron_pre_reset()
  • From: Tejun Heo
• Re: stable basic 4-port SATA card
  • From: Tejun Heo
• [PATCH #upstream] ahci: update PCS programming
  • From: Tejun Heo
• Re: Hang during boot in piix_init_pcs (ata_piix.c) with macbook pro
  • From: Tejun Heo
• Re: size of git repository (was Re: [BUG] New Kernel Bugs)
  • From: Willy Tarreau
• [git patches] libata fixes
  • From: Tejun Heo
• [PATCH] ata_piix: port enable for the first SATA controller of ICH8 is 0xf not 0x3
  • From: Tejun Heo
• [PATCH] ata_piix: only enable the first port on apple macbook pro
  • From: Tejun Heo
• [PATCH] ata_piix: reorganize controller IDs
  • From: Tejun Heo
• Re: Hang during boot in piix_init_pcs (ata_piix.c) with macbook pro
  • From: Tejun Heo
• Re: Problem with PCMCIA IDE
  • From: Akkana Peck
• Re: [PATCH 21/21] ide: make remaining built-in only IDE host drivers modular
  • From: Bartlomiej Zolnierkiewicz
• Re: Process Scheduling Issue using sg/libata
  • From: Mark Lord
• Re: [PATCH 21/21] ide: make remaining built-in only IDE host drivers modular
  • From: Benjamin Herrenschmidt
• Re: Problem with PCMCIA IDE
  • From: Alan Cox
• [PATCH 21/21] ide: make remaining built-in only IDE host drivers modular
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 20/21] ide: fix host drivers depending on ide_generic to probe for interfaces
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 19/21] cmd640: fix dependency on IDE_GENERIC
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 18/21] ide: move ide_arm_init() call from init_ide_data() to ide_init()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 17/21] ide: drop 'initializing' argument from ide_register_hw()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 16/21] ide: add ide_init_port_hw() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/21] sgiioc4: always init hwif->io_ports
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/21] ide: remove ideprobe_init()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/21] ide: add hwif->chipset fixup to ide_device_add()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/21] rapide: set hwif->chipset
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/21] ide: fix probing for hosts with serialized or IRQ sharing interfaces
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 9/21] ide: kill probe_hwif_init()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/21] ide: don't try to unregister interfaces if 'initializing' in ide_register_hw()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/21] ide-cris: don't override ide_register_hw() result
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/21] ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/21] ide: add CONFIG_IDE_H8300 config option
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/21] ide/Kconfig: fix mpc8xx host driver dependencies
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/21] macide/q40ide: add missing __init tag to {macide,q40ide}_init()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/21] ide: merge ->fixup and ->quirkproc methods
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/21] ide: dump taskfile HOB registers in ide_tf_load() (if DEBUG is defined)
  • From: Bartlomiej Zolnierkiewicz
• Re: Process Scheduling Issue using sg/libata
  • From: Fajun Chen
• Re: [PATCH 2.6.24-rc3] aec62xx: Fix kernel oops in driver's probe function
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] drivers/ide/ide-probe.c Skip ide_wait_not_busy on noprobe-disks. was: [PATCH][RESUBMIT] drivers/ide/ide-probe.c, kernel 2.6.23.1
  • From: Bartlomiej Zolnierkiewicz
• Problem with PCMCIA IDE
  • From: Akkana Peck
• Re: laptop reboots right after hibernation
  • From: Tomas Carnecky
• Re: Process Scheduling Issue using sg/libata
  • From: Mark Lord
• Re: Process Scheduling Issue using sg/libata
  • From: Fajun Chen
• Re: Hang during boot in piix_init_pcs (ata_piix.c) with macbook pro
  • From: Thomas Rohwer
• Re: size of git repository (was Re: [BUG] New Kernel Bugs)
  • From: Rene Herman
• Re: size of git repository (was Re: [BUG] New Kernel Bugs)
  • From: Ingo Molnar
• Re: size of git repository (was Re: [BUG] New Kernel Bugs)
  • From: James Bottomley
• Re: Process Scheduling Issue using sg/libata
  • From: Mark Lord
• Re: size of git repository (was Re: [BUG] New Kernel Bugs)
  • From: Rene Herman
• Lost interrupt with cmd 64x
  • From: Tobias Oed
• size of git repository (was Re: [BUG] New Kernel Bugs)
  • From: Pavel Machek
• Re: Process Scheduling Issue using sg/libata
  • From: Fajun Chen
• [PATCH 2.6.24-rc3] aec62xx: Fix kernel oops in driver's probe function
  • From: Aleksandar Radovanovic
• Re: Process Scheduling Issue using sg/libata
  • From: Mark Lord
• Re: Process Scheduling Issue using sg/libata
  • From: Fajun Chen
• Re: Process Scheduling Issue using sg/libata
  • From: Fajun Chen
• Re: Process Scheduling Issue using sg/libata
  • From: James Chapman
• Re: Process Scheduling Issue using sg/libata
  • From: Mark Lord
• Re: Process Scheduling Issue using sg/libata
  • From: Fajun Chen
• Re: Process Scheduling Issue using sg/libata
  • From: Fajun Chen
• Re: Process Scheduling Issue using sg/libata
  • From: Mark Lord
• Re: Process Scheduling Issue using sg/libata
  • From: Tejun Heo
• Process Scheduling Issue using sg/libata
  • From: Fajun Chen
• [PATCH] drivers/ide/ide-probe.c Skip ide_wait_not_busy on noprobe-disks. was: [PATCH][RESUBMIT] drivers/ide/ide-probe.c, kernel 2.6.23.1
  • From: Jonas Stare
• Re: [PATCH] siimage: remove resetproc() method
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH][RESUBMIT] drivers/ide/ide-probe.c, kernel 2.6.23.1
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: don't set PIO mode on pre-EIDE drives
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 6/13] sgiioc4: add ide_toggle_bounce() calls
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: don't set PIO mode on pre-EIDE drives
  • From: Alan Cox
• Re: [PATCH][RESUBMIT] drivers/ide/ide-probe.c, kernel 2.6.23.1
  • From: Jonas Stare
• Re: [PATCH] ide: don't set PIO mode on pre-EIDE drives
  • From: Sergei Shtylyov
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: [PATCH] ide: don't set PIO mode on pre-EIDE drives
  • From: Alan Cox
• Re: [PATCH] pata_sil680: kill bogus reset code
  • From: Alan Cox
• [PATCH] pata_sil680: kill bogus reset code (take 2)
  • From: Sergei Shtylyov
• Re: [PATCH] ide: don't set PIO mode on pre-EIDE drives
  • From: Sergei Shtylyov
• Re: [PATCH] ide: don't set PIO mode on pre-EIDE drives
  • From: Alan Cox
• Re: [PATCH 7/9] via82cxxx: keep local ide_pci_device_t copy
  • From: Sergei Shtylyov
• [PATCH] pata_sil680: kill bogus reset code
  • From: Sergei Shtylyov
• [PATCH] siimage: remove resetproc() method
  • From: Sergei Shtylyov
• Re: [PATCH] cmd64x: don't clear the other channels interrupt
  • From: Sergei Shtylyov
• [PATCH] ide: don't set PIO mode on pre-EIDE drives
  • From: Sergei Shtylyov
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: [PATCH][RESUBMIT] drivers/ide/ide-probe.c, kernel 2.6.23.1
  • From: Sergei Shtylyov
• Re: [PATCH][RESUBMIT] drivers/ide/ide-probe.c, kernel 2.6.23.1
  • From: Jonas Stare
• Re: [PATCH] it821x/jmicron: fix return value of {it821x,jmicron}_init_one()
  • From: Sergei Shtylyov
• Re: [PATCH 6/13] sgiioc4: add ide_toggle_bounce() calls
  • From: Jeremy Higdon
• Re: [Bugme-new] [Bug 9393] New: SError: { DevExch } occuring and causing disruption
  • From: Andrew Morton
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: [BUG] New Kernel Bugs
  • From: J. Bruce Fields
• Re: stable basic 4-port SATA card
  • From: john
• Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Mark Lord
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: [BUG] New Kernel Bugs
  • From: Ben Dooks
• Re: [PATCH] drivers/ide/ide-probe.c, kernel 2.6.23.1
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 14/18] ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 10/13] ide-cris: fix DMA methods
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] sis5513.c: Add Packard Bell EasyNote K5305 to laptops
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] cmd64x: don't clear the other channels interrupt
  • From: Martin Rogge
• Re: sata_mv: hard resetting port
  • From: Mark Lord
• Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Mark Lord
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: [BUG] New Kernel Bugs
  • From: Daniel Barkalow
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: [BUG] New Kernel Bugs
  • From: Theodore Tso
• Re: FIS structure and Command List structure for AHCI SATA controller
  • From: mike zheng
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Rene Herman
• Re: sata_mv: hard resetting port
  • From: Mark Lord
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Takashi Iwai
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Olivier Galibert
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Jörn Engel
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Rene Herman
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Bron Gondwana
• Re: [PATCH 14/18] ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag
  • From: Sergei Shtylyov
• Re: sata_mv: hard resetting port
  • From: Tomasz Chmielewski
• Re: [PATCH 14/18] ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag
  • From: Sergei Shtylyov
• Re: sata_mv: hard resetting port
  • From: Tomasz Chmielewski
• Re: stable basic 4-port SATA card
  • From: Mikael Pettersson
• Re: stable basic 4-port SATA card
  • From: Jim Paris
• Re: libata_uli puts second channel to PIO4 on 2.6.18
  • From: Patric Karlsson
• Re: sata_nv on MCP51: NCQ possible?
  • From: Michael Tokarev
• Re: libata_uli puts second channel to PIO4 on 2.6.18
  • From: Patric Karlsson
• sata_nv on MCP51: NCQ possible?
  • From: Michael Tokarev
• Re: [PATCH] drivers/ide/ide-probe.c, kernel 2.6.23.1
  • From: Jonas Stare
• Re: stable basic 4-port SATA card
  • From: Tejun Heo
• Re: stable basic 4-port SATA card
  • From: Jeff Breidenbach
• [patch 38/40] libata: backport ATA_FLAG_NO_SRST and ATA_FLAG_ASSUME_ATA, part 2
  • From: Greg Kroah-Hartman
• [patch 37/40] libata: backport ATA_FLAG_NO_SRST and ATA_FLAG_ASSUME_ATA
  • From: Greg Kroah-Hartman
• [patch 14/40] libata: sync NCQ blacklist with upstream
  • From: Greg Kroah-Hartman
• Re: Moderated list
  • From: Rene Herman
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Rene Herman
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Bron Gondwana
• Re: stable basic 4-port SATA card
  • From: Mark Lord
• Re: stable basic 4-port SATA card
  • From: Robert Hancock
• Re: sata_mv: hard resetting port
  • From: Mark Lord
• Re: [PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3)
  • From: Tejun Heo
• Re: [PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3)
  • From: Robert Hancock
• Re: sata_mv: hard resetting port
  • From: Tejun Heo
• Re: stable basic 4-port SATA card
  • From: Tejun Heo
• Re: [PATCH] pata_sis.c: Add Packard Bell EasyNote K5305 to laptops
  • From: Tejun Heo
• Re: [BUG] New Kernel Bugs
  • From: Neil Brown
• Re: [BUG] New Kernel Bugs
  • From: Neil Brown
• Re: [PATCH] libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs
  • From: Tejun Heo
• Re: [PATCH 1/2] sata_nv: don't use legacy DMA in ADMA mode
  • From: Tejun Heo
• Re: [PATCH 1/2] sata_nv: don't use legacy DMA in ADMA mode
  • From: Tejun Heo
• Re: [PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3)
  • From: Tejun Heo
• Re: Promise SATA TX4 300 port timeout with sata_promise in 2.6.22, kernel panic in 2.6.23
  • From: Tejun Heo
• Re: [PATCH 2/2] libata: use ATA_HORKAGE_STUCK_ERR for ATAPI tape drives
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  • From: Tejun Heo
• Re: sata_mv PCI ERROR; PCI IRQ reason=0x00000000 highpoint rocketraid 2300 pci-e
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Daniel Barkalow
• Re: Moderated list
  • From: David Miller
• sata_mv PCI ERROR; PCI IRQ reason=0x00000000 highpoint rocketraid 2300 pci-e
  • From: Hein-Pieter van Braam
• Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Mark Lord
• Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Mark Lord
• Re: [Bugme-new] [Bug 9373] New: PDC20267 exception Emask on I/O
  • From: Bjoern Olausson
• Re: [BUG] New Kernel Bugs
  • From: Gabriel C
• Re: [BUG] New Kernel Bugs
  • From: Denys Vlasenko
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: [BUG] New Kernel Bugs
  • From: Randy Dunlap
• Re: [BUG] New Kernel Bugs
  • From: david
• Re: [BUG] New Kernel Bugs
  • From: Ingo Molnar
• Re: [BUG] New Kernel Bugs
  • From: Ingo Molnar
• Re: [BUG] New Kernel Bugs
  • From: Ingo Molnar
• Re: [BUG] New Kernel Bugs
  • From: Randy Dunlap
• Re: [BUG] New Kernel Bugs
  • From: Ingo Molnar
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: [BUG] New Kernel Bugs
  • From: James Bottomley
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Greg KH
• Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Mark Lord
• Re: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Mark Lord
• Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Mark Lord
• RE: [PATCH] Add quirk to set AHCI mode on ICH boards
  • From: Allen Martin
• Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Kok, Auke
• Re: [BUG] New Kernel Bugs
  • From: J. Bruce Fields
• RE: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• Re: 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Mark Lord
• Re: [PATCH] libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs
  • From: Alan Cox
• 2.6.23.1 - sata_mv (7042) hang with large file operations
  • From: Morrison, Tom
• [PATCH] libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Randy Dunlap
• Re: [stable] [PATCH] ide: fix serverworks.c UDMA regression
  • From: Greg KH
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Andi Kleen
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Thomas Gleixner
• Re: [PATCH 10/13] ide-cris: fix DMA methods
  • From: Sergei Shtylyov
• Re: [PATCH 13/13] ide: merge ->dma_host_{on,off} methods into ->dma_host_set method
  • From: Sergei Shtylyov
• Re: [PATCH 9/13] ide: remove ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t
  • From: Sergei Shtylyov
• Re: sata_mv: hard resetting port
  • From: Mark Lord
• Re: sata_mv: hard resetting port
  • From: Tomasz Chmielewski
• Re: sata_mv: hard resetting port
  • From: Mark Lord
• Re: [PATCH 4/13] cy82c693: correct DMA modes clipping
  • From: Sergei Shtylyov
• Re: [BUG] New Kernel Bugs
  • From: Larry Finger
• Re: [stable] [PATCH] ide: fix serverworks.c UDMA regression
  • From: Tony Battersby
• Re: [BUG] New Kernel Bugs
  • From: Ingo Molnar
• Re: [BUG] New Kernel Bugs
  • From: Fabio Comolli
• Re: [BUG] New Kernel Bugs
  • From: Ingo Molnar
• Re: [BUG] New Kernel Bugs
  • From: Pavel Machek
• Re: Moderated list (Was: Re: [BUG] New Kernel Bugs)
  • From: Takashi Iwai
• Re: [BUG] New Kernel Bugs
  • From: Hannes Reinecke
• Re: [BUG] New Kernel Bugs
  • From: Matthew Wilcox
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Rene Herman
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Rene Herman
• Re: [BUG] New Kernel Bugs
  • From: Jiri Kosina
• Re: Moderated list (Was: Re: [BUG] New Kernel Bugs)
  • From: Rene Herman
• Re: [PATCH 1/2] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  • From: Alan Cox
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Andi Kleen
• Moderated list (Was: Re: [BUG] New Kernel Bugs)
  • From: Takashi Iwai
• Re: [PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3)
  • From: Alan Cox
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: David Miller
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: David Miller
• Re: 2.6.24-rc & SB600 AHCI no go on >=4GB of RAM
  • From: Srihari Vijayaraghavan
• Re: [alsa-devel] [BUG] New Kernel Bugs
  • From: Rene Herman
• Re: [PATCH 9/18] ide: kill duplicate code in ide_dump_{ata,atapi}_status()
  • From: Sergei Shtylyov
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• sata_mv: hard resetting port
  • From: Tomasz Chmielewski
• Re: Promise SATA TX4 300 port timeout with sata_promise in 2.6.22, kernel panic in 2.6.23
  • From: Patric Karlsson
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: Promise SATA TX4 300 port timeout with sata_promise in 2.6.22, kernel panic in 2.6.23
  • From: I Stratford
• Re: [BUG] New Kernel Bugs
  • From: Denys Vlasenko
• Re: [BUG] New Kernel Bugs
  • From: Adrian Bunk
• stable basic 4-port SATA card
  • From: Jeff Breidenbach
• [PATCH 2/2] libata: use ATA_HORKAGE_STUCK_ERR for ATAPI tape drives
  • From: Albert Lee
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• [PATCH 1/2] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  • From: Albert Lee
• Re: [BUG] New Kernel Bugs
  • From: Sam Ravnborg
• Re: [BUG] New Kernel Bugs
  • From: Sam Ravnborg
• Re: Delkin Cardbus IDE, a.k.a. ASKA "Ninja" chipset
  • From: Mark Lord
• [PATCH 2/2] sata_nv: fix ATAPI issues with memory over 4GB (v3)
  • From: Robert Hancock
• [PATCH 1/2] sata_nv: don't use legacy DMA in ADMA mode
  • From: Robert Hancock
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB
  • From: Robert Hancock
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: libata , Silicon Image 3124
  • From: Tejun Heo
• Re: [PATCH] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
  • From: Tejun Heo
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB
  • From: Tejun Heo
• Re: [Bugme-new] [Bug 9373] New: PDC20267 exception Emask on I/O
  • From: Bjoern Olausson
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• Re: [BUG] New Kernel Bugs
  • From: Stephen Hemminger
• Re: [BUG] New Kernel Bugs
  • From: David Miller
• Re: [Bugme-new] [Bug 9373] New: PDC20267 exception Emask on I/O
  • From: Andrew Morton
• Re: Delkin Cardbus IDE, a.k.a. ASKA "Ninja" chipset
  • From: Alan Cox
• Re: [BUG] New Kernel Bugs
  • From: Chuck Ebbert
• Re: [BUG] New Kernel Bugs
  • From: Denys Vlasenko
• Re: [BUG] New Kernel Bugs
  • From: Denys Vlasenko
• Re: [BUG] New Kernel Bugs
  • From: Denys Vlasenko
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [stable] [PATCH] ide: fix serverworks.c UDMA regression
  • From: Greg KH
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [BUG] New Kernel Bugs
  • From: Thomas Gleixner
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: [BUG] New Kernel Bugs
  • From: Jörn Engel
• Re: [BUG] New Kernel Bugs
  • From: Mark Lord
• Re: [BUG] New Kernel Bugs
  • From: Russell King
• Re: [BUG] New Kernel Bugs
  • From: Jörn Engel
• Re: [BUG] New Kernel Bugs
  • From: Frans Pop
• Re: [BUG] New Kernel Bugs
  • From: Andrew Morton
• Re: [BUG] New Kernel Bugs
  • From: Rafael J. Wysocki
• Re: Correct behaviour of an ATA/ATAPI CD Drive
  • From: Alan Cox
• Correct behaviour of an ATA/ATAPI CD Drive
  • From: Adrian McMenamin
• Re: [BUG] New Kernel Bugs
  • From: Romano Giannetti
• Re: [BUG] New Kernel Bugs
  • From: Adrian Bunk
• Re: [PATCH 1/13] serverworks: cleanup ->set_dma_mode method
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 12/13] ide: move drive->using_dma check to callers of ->dma_host_on method
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] pata_sis.c: Add Packard Bell EasyNote K5305 to laptops
  • From: Alan Cox
• Re: [BUG] New Kernel Bugs
  • From: Alan Cox