> sam song wrote: > > [USI]: ata pass through(16) cdb: 85 0b 06 00 41 00 00 00 00 00 00 00 00 e0 > > fd 00 > > [<unknown opcode>: 85 0b 06 00 41 00 00 00 00 00 00 00 00 e0 fd 00 ] > > scsi_status=0x2, host_status=0x0, driver_status=0x8 > > info=0x1 duration=8184280 milliseconds > [--snip--] > > ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > > ata2.00: cmd fd/41:00:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 33280 out > > res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) > > ata2: port is slow to respond, please be patient (Status 0xd0) > > ata2: device not ready (errno=-16), forcing hardreset > > ata2: soft resetting port > > ata2.00: configured for UDMA/133 > > ata2: EH complete > > sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) > > sd 2:0:0:0: [sdb] Write Protect is off > > sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > > sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA > > Hmmm... It's timeout. How long does the command take? It's a bit weird > because 36000s but the reported command duration is 136s. How long did > the command take actually? The command did actually take 136minutes25seconds. I set the timeout in app as 36000seconds(10-hour). Thanks so much, Sam Song - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html