sam song wrote: > Hi, > > I am convinced that the SATA Disk does support one vendor specific ATA > command and got the whole bus trace via Trainer. > However, I cannot implement that in the real cases with either HBA or SATA > Controller like ICH5/7 via ATA Pass Thru. > So I wonder whether there is one possible setup including HW and SW > supporting the ATA command via ATA Pass directly and no need to understand > the command meaning itself. > > Here is one result I got. > > [<unknown opcode>: 85 0b 06 00 01 00 00 00 00 00 00 00 00 e0 fd 00 ] > scsi_status=0x2, host_status=0x0, driver_status=0x8 > info=0x1 duration=270111 milliseconds > status=0x2: sense_key=0x7 asc=0x1 ascq=0x0 That sense key is data protect. I don't think any code in ATA passthrough code path can raise that sense key. What did you exactly do? Can you post the source code? -- tejun - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
