Linux IDE Archive

• Thread Index

• [PATCH 2/3] ide: add IDE_HFLAG_CLEAR_SIMPLEX host flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/3] amd74xx: remove amd_ide_chips table
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] trm290: do hook dma_host_{on,off} methods (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-cd: move the remaining cdrom.c ioctl handling code to ide-cd_ioctl.c
  • From: Bartlomiej Zolnierkiewicz
• Re: HSM violation erros on sata_promise
  • From: Mikael Pettersson
• [PATCH] trm290: do hook dma_host_{on,off} methods (take 2)
  • From: Sergei Shtylyov
• Re: [PATCH 7/7] sg_ring: convert core ATA code to sg_ring.
  • From: Tejun Heo
• Re: [PATCH 7/7] sg_ring: convert core ATA code to sg_ring.
  • From: Rusty Russell
• HSM violation erros on sata_promise
  • From: Theo Baumgartner
• Re: [PATCH] ide-cd: move the remaining cdrom.c ioctl handling code to ide-cd_ioctl.c
  • From: Borislav Petkov
• Re: question about SATA vs (SATA via USB)
  • From: Harald Dunkel
• [PATCH] ide-cd: move the remaining cdrom.c ioctl handling code to ide-cd_ioctl.c
  • From: Borislav Petkov
• Re: [PATCH] trm290: do hook dma_host_{on,off} methods
  • From: Sergei Shtylyov
• [PATCH] trm290: do hook dma_host_{on,off} methods
  • From: Sergei Shtylyov
• Re: [PATCH 7/7] sg_ring: convert core ATA code to sg_ring.
  • From: James Bottomley
• Re: [PATCH 00/63] ide-cd: redux
  • From: Borislav Petkov
• Re: [PATCH 7/7] sg_ring: convert core ATA code to sg_ring.
  • From: Tejun Heo
• Re: question about SATA vs (SATA via USB)
  • From: Tejun Heo
• Re: 2.6.24-rc6 and earlier: "host bus error" after STR
  • From: Tejun Heo
• Re: HSM violation errors
  • From: Robert Hancock
• Re: [PATCH 00/63] ide-cd: redux
  • From: Andrew Morton
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: saeed bishara
• Re: [PATCH 1/2] ide: add ide_dump_identify() debug helper
  • From: Sergei Shtylyov
• Re: 2.6.24-rc6 and earlier: "host bus error" after STR
  • From: Jeff Garzik
• HSM violation errors
  • From: Jeff Mitchell
• 2.6.24-rc6 and earlier: "host bus error" after STR
  • From: Alexey Dobriyan
• Re: [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] cmd64x: fix hwif->chipset setup
  • From: Bartlomiej Zolnierkiewicz
• Debian shutdown fixes
  • From: Jim Paris
• Re: [PATCH 00/63] ide-cd: redux
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/2] ide-{floppy,tape}: remove debug code for dumping identify data
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/2] ide: add ide_dump_identify() debug helper
  • From: Bartlomiej Zolnierkiewicz
• Re: Peculiar out-of-sync boot log lines
  • From: Nick Warne
• Re: [PATCH 00/63] ide-cd: redux
  • From: Borislav Petkov
• Re: Sata 4726 Testing
  • From: Andrew Ryder
• O2 Xmas Promo 2007
  • From: O2 World Largest Promotion
• Re: [PATCH 00/63] ide-cd: redux
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 00/63] ide-cd: redux
  • From: Bartlomiej Zolnierkiewicz
• Re: pata_via question.
  • From: Alan Cox
• Re: [PATCH 06/63] ide-cd: fix error messages in cdrom_write_intr()
  • From: Sergei Shtylyov
• Re: [PATCH 07/63] ide-cd: add error message for DMA error to cdrom_read_intr()
  • From: Sergei Shtylyov
• Re: [PATCH 42/63] ide-cd: coding style fixes for cdrom_get_toc_entry()
  • From: Sergei Shtylyov
• Re: [PATCH 14/63] ide-cd: fix trailing whitespaces in changelog
  • From: Sergei Shtylyov
• Re: [PATCH 17/63] ide-cd: remove unused defines from ide-cd.h
  • From: Sergei Shtylyov
• pata_via question.
  • From: Gene Heskett
• Re: [PATCH 59/63] ide-cd: call blk_dump_rq_flags() on "missing data" in cdrom_rw_intr()
  • From: Sergei Shtylyov
• Re: [PATCH 63/63] ide-cd: update driver version, comments and copyrights
  • From: Sergei Shtylyov
• Re: [PATCH 46/63] ide-cd: call blk_dump_rq_flags() on "missing data" in cdrom_newpc_intr()
  • From: Sergei Shtylyov
• Re: [PATCH 21/63] ide-cd: remove unused and write-only struct ide_cd_config_flags fields
  • From: Sergei Shtylyov
• Re: [PATCH 20/63] ide-cd: remove needless zeroing of 'info' fields from ide_cdrom_setup()
  • From: Sergei Shtylyov
• Re: [PATCH 22/63] ide-cd: remove struct atapi_{mechstat_header,changer_info,slot}
  • From: Sergei Shtylyov
• Re: [PATCH 30/63] ide-cd: remove NO_DOOR_LOCKING define
  • From: Sergei Shtylyov
• Re: [PATCH 34/63] ide-cd: remove duplicate sense keys definitions from ide-cd.h
  • From: Sergei Shtylyov
• Re: [PATCH 23/63] ide-cd: cleanup ide_cdrom_update_speed()
  • From: Sergei Shtylyov
• Re: [PATCH 12/63] ide-cd: fix "missing data" handling in cdrom_pc_intr()
  • From: Sergei Shtylyov
• Re: [PATCH 19/63] ide-cd: remove unused struct atapi_cdrom_subchnl
  • From: Sergei Shtylyov
• Re: [PATCH 18/63] ide-cd: remove dead code from cdrom_pc_intr()
  • From: Sergei Shtylyov
• Re: [PATCH 16/63] ide-cd: remove stale cdrom_transfer_packet_command() comment
  • From: Sergei Shtylyov
• Re: [PATCH 13/63] ide-cd: fix DMA error handling in cdrom_newpc_intr()
  • From: Sergei Shtylyov
• Re: [PATCH 09/63] ide-cd: fix 'ireason' reporting in cdrom_pc_intr()
  • From: Sergei Shtylyov
• Re: [PATCH 08/63] ide-cd: fix error message in cdrom_pc_intr()
  • From: Sergei Shtylyov
• Re: [PATCH 05/63] ide-cd: add missing 'ireason' masking to cdrom_write_intr()
  • From: Sergei Shtylyov
• Re: [PATCH 04/63] ide-cd: fix error messages in cdrom_{read,write}_check_ireason()
  • From: Sergei Shtylyov
• Re: [PATCH 01/63] ide-cd: fix SAMSUNG CD-ROM SCR-3231 quirk
  • From: Sergei Shtylyov
• Re: [PATCH 02/63] ide-cd: fix ACER/AOpen 24X CDROM speed reporting on big-endian machines
  • From: Sergei Shtylyov
• Re: Questions about SATA hotplug in linux 2.6
  • From: Tejun Heo
• Re: [PATCH 2/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Paul Mundt
• Re: Sata 4726 Testing
  • From: Andrew Ryder
• Re: [PATCH] fix page_alloc for larger I/O segments (improved)
  • From: Matthew Wilcox
• Re: [PATCH 2/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Adrian McMenamin
• Re: [PATCH 00/63] ide-cd: redux
  • From: Phillip Susi
• Re: [PATCH] pata_of_platform: Move electra-ide support over to new framework
  • From: Olof Johansson
• Re: [PATCH 00/63] ide-cd: redux
  • From: Borislav Petkov
• RE: Questions about SATA hotplug in linux 2.6
  • From: Shane Huang
• RE: Questions about SATA hotplug in linux 2.6
  • From: Shane Huang
• Re: [PATCH] pata_of_platform: Move electra-ide support over to new framework
  • From: Paul Mackerras
• Re: [PATCH 41/63] ide-cd: move lba_to_msf() and msf_to_lba() to <linux/cdrom.h>
  • From: Jens Axboe
• Re: Questions about SATA hotplug in linux 2.6
  • From: Tejun Heo
• [PATCH 24/63] ide-cd: add IDE_CD_CAPABILITIES define
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 26/63] ide-cd: kill CDROM_CONFIG_FLAGS() macro
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/63] ide-cd: fix error messages in cdrom_write_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 29/63] ide-cd: remove struct ide_cd_{config,state}_flags
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/63] ide-cd: add error message for DMA error to cdrom_read_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 32/63] ide-cd: use BCD2BIN()/BIN2BCD() macros from <linux/bcd.h>
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 35/63] ide-cd: coding style fixes for VERBOSE_IDE_CD_ERRORS code
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 37/63] ide-cd: factor out ioctl handlers from ide_cdrom_audio_ioctl()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 40/63] ide-cd: merge cdrom_select_speed() into ide_cdrom_select_speed()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 41/63] ide-cd: move lba_to_msf() and msf_to_lba() to <linux/cdrom.h>
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 42/63] ide-cd: coding style fixes for cdrom_get_toc_entry()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/63] ide-cd: fix trailing whitespaces in changelog
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 43/63] ide-cd: rename cdrom_* functions to ide_cd_*
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 45/63] ide-cd: remove BUG_ON() from cdrom_newpc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 47/63] ide-cd: factor out request sense fixup from cdrom_pc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/63] ide-cd: add ide_cd_pad_transfer() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 48/63] ide-cd: unify request end exit path in cdrom_pc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 49/63] ide-cd: merge cdrom_pc_intr() and cdrom_newpc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 50/63] ide-cd: remove cdrom_do_pc_continuation()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 51/63] ide-cd: merge cdrom_do_packet_command() and cdrom_do_block_pc()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 52/63] ide-cd: add ide_cd_drain_data() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 53/63] ide-cd: factor out transfer size checking from cdrom_read_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 54/63] ide-cd: merge cdrom_read_intr() and cdrom_write_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 17/63] ide-cd: remove unused defines from ide-cd.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 55/63] ide-cd: merge cdrom_start_read_continuation() and cdrom_start_rw_cont()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 56/63] ide-cd: merge cdrom_start_read() and cdrom_start_write()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 57/63] ide-cd: unify moving to the next buffer in cdrom_rw_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 58/63] ide-cd: prepare cdrom_rw_intr() and cdrom_newpc_intr() to be merged
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 59/63] ide-cd: call blk_dump_rq_flags() on "missing data" in cdrom_rw_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 60/63] ide-cd: merge cdrom_rw_intr() and cdrom_newpc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 61/63] ide-cd: merge cdrom_write_check_ireason() and cdrom_read_check_ireason()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 62/63] ide-cd: unify request end exit path in cdrom_decode_status()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 63/63] ide-cd: update driver version, comments and copyrights
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 46/63] ide-cd: call blk_dump_rq_flags() on "missing data" in cdrom_newpc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 44/63] ide-cd: move code handling cdrom.c IOCTLs to ide-cd_ioctl.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 39/63] ide-cd: merge cdrom_read_subchannel() into ide_cdrom_get_mcn()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 38/63] ide-cd: merge cdrom_play_audio() into ide_cd_fake_play_trkind()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 36/63] ide-cd: move VERBOSE_IDE_CD_ERRORS code to ide-cd_verbose.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 34/63] ide-cd: remove duplicate sense keys definitions from ide-cd.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 33/63] ide-cd: re-organize handling of quirky devices
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 31/63] ide-cd: remove STANDARD_ATAPI define
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 30/63] ide-cd: remove NO_DOOR_LOCKING define
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 28/63] ide-cd: remove struct atapi_capabilities_page
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 27/63] ide-cd: kill CDROM_STATE_FLAGS() macro
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 25/63] ide-cd: remove redundant config flags
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 23/63] ide-cd: cleanup ide_cdrom_update_speed()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 22/63] ide-cd: remove struct atapi_{mechstat_header,changer_info,slot}
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 21/63] ide-cd: remove unused and write-only struct ide_cd_config_flags fields
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 20/63] ide-cd: remove needless zeroing of 'info' fields from ide_cdrom_setup()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/63] ide-cd: fix "missing data" handling in cdrom_pc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 19/63] ide-cd: remove unused struct atapi_cdrom_subchnl
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 18/63] ide-cd: remove dead code from cdrom_pc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 16/63] ide-cd: remove stale cdrom_transfer_packet_command() comment
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/63] ide-cd: move historical changelog to Documentation/ide/ChangeLog.ide-cd.1994-2004
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/63] ide-cd: fix DMA error handling in cdrom_newpc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/63] ide-cd: fix 'ireason' reporting in cdrom_pc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/63] ide-cd: use xfer_func_t in cdrom_pc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/63] ide-cd: fix error message in cdrom_pc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/63] ide-cd: add missing 'ireason' masking to cdrom_write_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/63] ide-cd: fix error messages in cdrom_{read,write}_check_ireason()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/63] ide-cd: fix SAMSUNG CD-ROM SCR-3231 quirk
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/63] ide-cd: use ide_cd_release() in ide_cd_probe()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 00/63] ide-cd: redux
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 02/63] ide-cd: fix ACER/AOpen 24X CDROM speed reporting on big-endian machines
  • From: Bartlomiej Zolnierkiewicz
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Alan Cox
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Marco Gatti
• question about SATA vs (SATA via USB)
  • From: Harri
• [PATCH 7/7] sg_ring: convert core ATA code to sg_ring.
  • From: Rusty Russell
• [PATCH 6/7] sg_ring: libata simplification
  • From: Rusty Russell
• [PATCH 5/7] sg_ring: Convert core scsi code to sg_ring.
  • From: Rusty Russell
• [PATCH 4/7] sg_ring: dma_map_sg_ring() helper
  • From: Rusty Russell
• [PATCH 3/7] sg_ring: blk_rq_map_sg_ring as a counterpart to blk_rq_map_sg.
  • From: Rusty Russell
• [PATCH 2/7] sg_ring: use in virtio.
  • From: Rusty Russell
• [PATCH 1/7] sg_ring: introduce sg_ring: a ring of scatterlist arrays.
  • From: Rusty Russell
• [PATCH 0/7] sg_ring: a ring of scatterlist arrays
  • From: Rusty Russell
• Re: [patch 9/9] pata_legacy: restructure and revamp
  • From: Jeff Garzik
• Re: [PATCH] pata_pcmcia: Minor cleanups and support for dual channel cards
  • From: Jeff Garzik
• Merged some Alan patches...
  • From: Jeff Garzik
• Re: [PATCH 2/2] [libata] sata_mv: Support integrated controllers
  • From: Jeff Garzik
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: Jeff Garzik
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: Jeff Garzik
• Re: [PATCH 1/1] [LibATA] sata_mv: Remove dumplicated host template
  • From: Jeff Garzik
• Re: [PATCH 13/15] libata: implement ATAPI drain buffer
  • From: Jeff Garzik
• Re: [PATCH 12/15] libata: make qc->nbytes include extra buffers
  • From: Jeff Garzik
• Re: [PATCH 08/15] libata: improve ATAPI draining
  • From: Jeff Garzik
• Re: [PATCH 07/15] change-data_xfer
  • From: Jeff Garzik
• Re: [PATCH 05/15] libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_*
  • From: Jeff Garzik
• Re: [PATCH 01/15] libata: make atapi_request_sense() use sg
  • From: Jeff Garzik
• Re: [patch 2/9] pata_hpt37x-fix-outstanding-bug-reports-on-the-hpt374-and-37x-cable-detect-checkpatch-fixes
  • From: Jeff Garzik
• Re: [patch 1/9] drivers/ata/libata-eh.c: fix printk warning
  • From: Jeff Garzik
• Re: [PATCH 1/5] libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes()
  • From: Jeff Garzik
• Re: sata_mv not working with a RocketRaid 2220
  • From: Jean-Louis Dupond
• Re: ATA bus error with external hd on esata
  • From: Zsolt Barat
• Re: ATA bus error with external hd on esata
  • From: Zsolt Barat
• RE: Questions about SATA hotplug in linux 2.6
  • From: Shane Huang
• Re: Questions about SATA hotplug in linux 2.6
  • From: Tejun Heo
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Marco Gatti
• RE: Questions about SATA hotplug in linux 2.6
  • From: Shane Huang
• [PATCH 5/5] pata_amd: update mode selection for NV PATAs
  • From: Tejun Heo
• [PATCH 4/5] libata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask()
  • From: Tejun Heo
• [PATCH 3/5] libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi
  • From: Tejun Heo
• [PATCH 1/5] libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes()
  • From: Tejun Heo
• [PATCH 2/5] libata: fix ata_acpi_gtm_xfermask()
  • From: Tejun Heo
• [PATCHSET] libata: improve timing code and fix pata_amd transfer mode selection, take #3
  • From: Tejun Heo
• Re: [patch 3/9] libata: xfer_mask is unsigned int not unsigned long
  • From: Jeff Garzik
• Re: [patch 3/9] libata: xfer_mask is unsigned int not unsigned long
  • From: Andrew Morton
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: git repo and #upstream merging
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: fix ATAPI draining
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: improve warnings about Highpoint RocketRAID 23xx cards
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: add ST3160023AS / 3.42 to NCQ blacklist
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: clear link->eh_info.serror from ata_std_postreset()
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] sata_sil: fix spurious IRQ handling
  • From: Jeff Garzik
• Re: [PATCH 01/10] libata-acpi: adjust constness in ata_acpi_gtm/stm() parameters
  • From: Jeff Garzik
• Re: [PATCH 01/10] libata-acpi: adjust constness in ata_acpi_gtm/stm() parameters
  • From: Jeff Garzik
• Re: [patch 3/9] libata: xfer_mask is unsigned int not unsigned long
  • From: Jeff Garzik
• Re: [PATCH] libata-core: blacklist drives from using NCQ
  • From: Alan Cox
• Re: [PATCH 2/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Jan Engelhardt
• Re: [PATCH] Fix build break caused by "ide: remove ideprobe_init()"
  • From: Olof Johansson
• Re: sata_mv not working with a RocketRaid 2220
  • From: Mark Lord
• [PATCH] libata-core: blacklist drives from using NCQ
  • From: David Milburn
• Re: [PATCH pata-2.6] hpt366: merge set_dma_mode() methods
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] drivers/ide/: Spelling fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Fix build break caused by "ide: remove ideprobe_init()"
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] drivers/ide/: Spelling fixes
  • From: Joe Perches
• [PATCH] drivers/ata/: Spelling fixes
  • From: Joe Perches
• Re: ATA bus error with external hd on esata
  • From: Jean-Louis Dupond
• Re: ATA bus error with external hd on esata
  • From: Greg Freemyer
• Re: [PATCH 2/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Adrian McMenamin
• Re: [PATCH 2/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Jens Axboe
• Re: CMD646 & cdrom: drive appears confused & drive not ready for command
  • From: Meelis Roos
• sata_mv not working with a RocketRaid 2220
  • From: Jean-Louis Dupond
• Re: CMD646 & cdrom: drive appears confused & drive not ready for command
  • From: Andrew Morton
• Re: ATA bus error with external hd on esata
  • From: Andrew Morton
• Re: Iomega ZIP-100 drive unsupported with jmicron JMB361 chip?
  • From: Andrew Morton
• [Patch]: ACPI : Not register gsi for PCI IDE controller in legacy mode
  • From: Zhao Yakui
• Re: Acard ATP8620 2SATA / 1 IDE driver - AHCI.C Nov082007
  • From: jameshsu
• Re: Iomega ZIP-100 drive unsupported with jmicron JMB361 chip?
  • From: Bill Davidsen
• Re: [PATCH 2/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Adrian McMenamin
• Re: [PATCH 2/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Paul Mundt
• Re: [PATCH] fix page_alloc for larger I/O segments (improved)
  • From: Mel Gorman
• Re: [PATCH 2/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Mike Frysinger
• Re: How to Switch DMA off for only one Harddisk at Kernelboot
  • From: Gabriel C
• Re: How to Switch DMA off for only one Harddisk at Kernelboot
  • From: Oliver Joa
• Re: How to Switch DMA off for only one Harddisk at Kernelboot
  • From: Gabriel C
• Re: [PATCH 2/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Adrian McMenamin
• Re: [PATCH 2/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Adrian McMenamin
• Re: [PATCH 0/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Adrian McMenamin
• [PATCH 1/1] [LibATA] sata_mv: Remove dumplicated host template
  • From: Saeed Bishara
• Re: [PATCH 1/3] [libata] pata_platform: make probe and remove functions device type neutral
  • From: Paul Mundt
• Re: [PATCH 2/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Christoph Hellwig
• Re: [PATCH 2/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Paul Mundt
• Re: [PATCH 0/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Paul Mundt
• [PATCH 2/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Adrian McMenamin
• Re: [PATCH 0/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Adrian McMenamin
• [PATCH 3/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Adrian McMenamin
• [PATCH 1/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Adrian McMenamin
• [PATCH 0/3] Add GD-Rom support to the SEGA Dreamcast
  • From: Adrian McMenamin
• Re: [PATCH] ata.h: Don't do a SATA check for 40wire_relaxed
  • From: Alan Cox
• Re: [PATCH] ata.h: Don't do a SATA check for 40wire_relaxed
  • From: Peter Missel
• Re: [PATCH] drivers/ata/ahci.c, kernel 2.6.23.10
  • From: Mark Lord
• Re: [PATCH] drivers/ata/ahci.c, kernel 2.6.23.10
  • From: Michael Kühn
• Re: [PATCH] drivers/ata/ahci.c, kernel 2.6.23.10
  • From: Mark Lord
• Re: [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Anton Vorontsov
• [PATCH] drivers/ata/ahci.c, kernel 2.6.23.10
  • From: Michael Kühn
• Re: [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Stephen Rothwell
• Re: git repo and #upstream merging
  • From: Tejun Heo
• [PATCH 05/10] libata-acpi: add new hooks ata_acpi_dissociate() and ata_acpi_on_disable()
  • From: Tejun Heo
• [PATCH 10/10] libata-acpi: implement _GTF command filtering
  • From: Tejun Heo
• [PATCH 07/10] libata-acpi: implement dev->gtf_cache and evaluate _GTF right after _STM during resume
  • From: Tejun Heo
• [PATCH 09/10] libata-acpi: improve _GTF execution error handling and reporting
  • From: Tejun Heo
• [PATCH 06/10] libata-acpi: implement and use ata_acpi_init_gtm()
  • From: Tejun Heo
• [PATCH 08/10] libata-acpi: improve ACPI disabling
  • From: Tejun Heo
• [PATCHSET #upstram-fixes] libata-acpi: improve ACPI corner case handling, take #2
  • From: Tejun Heo
• [PATCH 03/10] libata: add more opcodes to ata.h
  • From: Tejun Heo
• [PATCH 01/10] libata-acpi: adjust constness in ata_acpi_gtm/stm() parameters
  • From: Tejun Heo
• [PATCH 04/10] libata: ata_dev_disable() should be called from EH context
  • From: Tejun Heo
• [PATCH 02/10] libata: update ata_*_printk() macros such that level can be a variable
  • From: Tejun Heo
• Re: Iomega ZIP-100 drive unsupported with jmicron JMB361 chip?
  • From: trash can
• Re: Strange ATA problems
  • From: Christoph Anton Mitterer
• Re: Strange ATA problems
  • From: Robert Hancock
• Re: [PATCH 12/30] blk_end_request: changing ub (take 4)
  • From: Pete Zaitcev
• [PATCH pata-2.6] hpt366: merge set_dma_mode() methods
  • From: Sergei Shtylyov
• Re: [PATCH] fix page_alloc for larger I/O segments (improved)
  • From: Mark Lord
• [PATCH 3/3] [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes
  • From: Anton Vorontsov
• [PATCH 2/3] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Anton Vorontsov
• [PATCH 1/3] [libata] pata_platform: make probe and remove functions device type neutral
  • From: Anton Vorontsov
• [PATCH v3 0/3] OF-platform PATA driver
  • From: Anton Vorontsov
• Re: [PATCH] fix page_alloc for larger I/O segments (improved)
  • From: Matthew Wilcox
• Re: [PATCH] fix page_alloc for larger I/O segments (improved)
  • From: Mark Lord
• Re: [patch 7/9] ata: ahci: Enclosure Management via LED
  • From: Kristen Carlson Accardi
• Re: [PATCH] fix page_alloc for larger I/O segments (improved)
  • From: Mel Gorman
• Re: [PATCH 12/30] blk_end_request: changing ub (take 4)
  • From: Kiyoshi Ueda
• Re: [PATCH v2 2/4] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Olof Johansson
• Re: [PATCH v2 2/4] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Scott Wood
• Re: Strange ATA problems
  • From: Tejun Heo
• Re: Best way to segments/requests
  • From: Mark Lord
• Re: Best way to segments/requests
  • From: Adrian McMenamin
• Re: Best way to segments/requests
  • From: Tejun Heo
• Re: [PATCH 7/9] libata-acpi: improve _GTF execution error handling and reporting
  • From: Mark Lord
• Re: [PATCH 7/9] libata-acpi: improve _GTF execution error handling and reporting
  • From: Tejun Heo
• Re: [BUG] Kernel Bugs Weekly (maybe bi-weekly)
  • From: Russell King
• Re: [PATCH 7/9] libata-acpi: improve _GTF execution error handling and reporting
  • From: Mark Lord
• Re: [PATCH 7/9] libata-acpi: improve _GTF execution error handling and reporting
  • From: Tejun Heo
• Re: [PATCH 7/9] libata-acpi: improve _GTF execution error handling and reporting
  • From: Mark Lord
• Re: ATA ACPI needs "Mr interpreter, would you please shut up?" flag
  • From: Mark Lord
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• Re: [BUG] Kernel Bugs Weekly (maybe bi-weekly)
  • From: James Bottomley
• Re: ATA ACPI needs "Mr interpreter, would you please shut up?" flag
  • From: Tejun Heo
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mel Gorman
• [PATCH] Fix build break caused by "ide: remove ideprobe_init()"
  • From: Olof Johansson
• Re: [PATCH v2 2/4] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Olof Johansson
• Re: [PATCHSET #upstram-fixes] libata-acpi: improve ACPI corner case handling
  • From: Tejun Heo
• Re: ATA ACPI needs "Mr interpreter, would you please shut up?" flag
  • From: Tejun Heo
• [PATCH 9/9] libata-acpi: implement _GTF command filtering and filter out LOCK commands
  • From: Tejun Heo
• [PATCH 7/9] libata-acpi: improve _GTF execution error handling and reporting
  • From: Tejun Heo
• [PATCH 8/9] libata-acpi: ignore _GTM failure during suspend
  • From: Tejun Heo
• [PATCH 5/9] libata: use init_gtm in ata_acpi_cbl_80wire()
  • From: Tejun Heo
• [PATCH 6/9] libata-acpi: improve ACPI disabling
  • From: Tejun Heo
• [PATCH 2/9] libata: update ata_*_printk() macros such that level can be a variable
  • From: Tejun Heo
• [PATCH 1/9] libata: drop const from struct ata_port param on ata_acpi_gtm/stm()
  • From: Tejun Heo
• [PATCH 3/9] libata: add more opcodes to ata.h
  • From: Tejun Heo
• [PATCH 4/9] libata: implement ata_acpi_init_gtm()
  • From: Tejun Heo
• [PATCHSET #upstram-fixes] libata-acpi: improve ACPI corner case handling
  • From: Tejun Heo
• Re: ATA ACPI needs "Mr interpreter, would you please shut up?" flag
  • From: Robert Hancock
• ATA ACPI needs "Mr interpreter, would you please shut up?" flag
  • From: Tejun Heo
• [BUG] Kernel Bugs Weekly (maybe bi-weekly)
  • From: Natalie Protasevich
• Re: [patch 5/9] libata: add TOSHIBA MK1637GSX to spurious command completion list
  • From: Tejun Heo
• Re: [PATCH] fix page_alloc for larger I/O segments
  • From: Matthew Wilcox
• Re: [PATCH] fix page_alloc for larger I/O segments (improved)
  • From: Mark Lord
• Re: [PATCH] fix page_alloc for larger I/O segments (improved)
  • From: Andrew Morton
• Re: [PATCH] fix page_alloc for larger I/O segments
  • From: Andrew Morton
• Re: [PATCH] fix page_alloc for larger I/O segments (improved)
  • From: James Bottomley
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• [PATCH] fix page_alloc for larger I/O segments (improved)
  • From: Mark Lord
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• [PATCH] fix page_alloc for larger I/O segments
  • From: Mark Lord
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Andrew Morton
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• [patch 9/9] pata_legacy: restructure and revamp
  • From: akpm
• [patch 4/9] pata_pcmcia: minor cleanups and support for dual channel cards
  • From: akpm
• [patch 7/9] ata: ahci: Enclosure Management via LED
  • From: akpm
• [patch 8/9] libata-fix-early-use-of-port-printk-checkpatch-fixes
  • From: akpm
• [patch 5/9] libata: add TOSHIBA MK1637GSX to spurious command completion list
  • From: akpm
• [patch 6/9] libata-set-proper-ata-udma-mode-for-bf548-according-to-system-clock-checkpatch-fixes
  • From: akpm
• [patch 3/9] libata: xfer_mask is unsigned int not unsigned long
  • From: akpm
• [patch 2/9] pata_hpt37x-fix-outstanding-bug-reports-on-the-hpt374-and-37x-cable-detect-checkpatch-fixes
  • From: akpm
• [patch 1/9] drivers/ata/libata-eh.c: fix printk warning
  • From: akpm
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• Best way to segments/requests
  • From: Adrian McMenamin
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Andrew Morton
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Jens Axboe
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: James Bottomley
• Re: Kernel 2.6.23.9 / P35 Chipset + WD 750GB Drives (reset port)
  • From: Bill Davidsen
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Andrew Morton
• VM allocates pages in reverse order again
  • From: Matthew Wilcox
• Re: [PATCH 12/30] blk_end_request: changing ub (take 4)
  • From: Pete Zaitcev
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Jens Axboe
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Jens Axboe
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Jens Axboe
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Jens Axboe
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Jens Axboe
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Jens Axboe
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Jens Axboe
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Jens Axboe
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Matthew Wilcox
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: James Bottomley
• Re: QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Matthew Wilcox
• QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• QUEUE_FLAG_CLUSTER: not working in 2.6.24 ?
  • From: Mark Lord
• Re: stable basic 4-port SATA card
  • From: Krzysztof Oledzki
• Re: [PATCH 0/2] [libata] sata_mv: Add support for Marvell's integrated SATA controller
  • From: Mark Lord
• Re: [PATCH 17/21] ide: drop 'initializing' argument from ide_register_hw()
  • From: Sergei Shtylyov
• Re: [PATCH 0/2] [libata] sata_mv: Add support for Marvell's integrated SATA controller
  • From: saeed bishara
• Re: stable basic 4-port SATA card
  • From: Mikael Pettersson
• Re: [PATCH 17/21] ide: drop 'initializing' argument from ide_register_hw()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 14/20] ide: convert "empty" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILE
  • From: Bartlomiej Zolnierkiewicz
• Re: stable basic 4-port SATA card
  • From: Patric Karlsson
• Re: [PATCH 17/21] ide: drop 'initializing' argument from ide_register_hw()
  • From: Sergei Shtylyov
• Re: [PATCH 15/20] ide: don't enable local IRQs for PIO-in in driver_cmd_intr()
  • From: Sergei Shtylyov
• Re: [PATCH 14/20] ide: convert "empty" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILE
  • From: Sergei Shtylyov
• [patch 56/60] libata: kill spurious NCQ completion detection
  • From: Greg KH
• [patch 35/36] libata: kill spurious NCQ completion detection
  • From: Greg KH
• patch libata-kill-spurious-ncq-completion-detection.patch queued to -stable tree
  • From: gregkh
• patch libata-kill-spurious-ncq-completion-detection.patch queued to -stable tree
  • From: gregkh
• RE: [PATCH] sata_nv,adma: fix error when rmmod sata_nv
  • From: Kuan Luo
• Re: [PATCH 01/30] blk_end_request: add new request completion interface (take 4)
  • From: Kiyoshi Ueda
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 20/21] ide: fix host drivers depending on ide_generic to probe for interfaces
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 19/30] blk_end_request: changing ide-scsi (take 4)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 17/21] ide: drop 'initializing' argument from ide_register_hw()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 12/20] ide: use wait_drive_not_busy() in drive_cmd_intr()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 15/20] ide: don't enable local IRQs for PIO-in in driver_cmd_intr()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 05/30] blk_end_request: changing um (take 4)
  • From: Jeff Dike
• Re: [PATCH 12/30] blk_end_request: changing ub (take 4)
  • From: Kiyoshi Ueda
• Re: Iomega ZIP-100 drive unsupported with jmicron JMB361 chip?
  • From: trash can
• RE: [PATCH 21/30] blk_end_request: changing cciss (take 4)
  • From: Miller, Mike (OS Dev)
• RE: [PATCH 21/30] blk_end_request: changing cciss (take 4)
  • From: Miller, Mike (OS Dev)
• Re: [PATCH 20/30] blk_end_request: changing xsysace (take 4)
  • From: Boaz Harrosh
• Re: [PATCH 21/30] blk_end_request: changing cciss (take 4)
  • From: Kiyoshi Ueda
• Re: [PATCH 20/30] blk_end_request: changing xsysace (take 4)
  • From: Kiyoshi Ueda
• Re: [PATCH] pata_legacy: Restructure and revamp
  • From: Alan Cox
• RE: [PATCH 21/30] blk_end_request: changing cciss (take 4)
  • From: Miller, Mike (OS Dev)
• RE: [PATCH 22/30] blk_end_request: changing cpqarray (take 4)
  • From: Miller, Mike (OS Dev)
• PATA_HPT37X embezzles two ports
  • From: Bjoern Olausson
• Re: sata_mv hotplug flaky?
  • From: Mark Lord
• Re: [PATCH 20/21] ide: fix host drivers depending on ide_generic to probe for interfaces
  • From: Sergei Shtylyov
• Re: Recent kernel hosing partition
  • From: For Junk Mail
• Re: [PATCH 27/30] blk_end_request: changing scsi (take 4)
  • From: James Bottomley
• Re: [PATCH 01/30] blk_end_request: add new request completion interface (take 4)
  • From: James Bottomley
• Re: [PATCH 00/30] blk_end_request: full I/O completion handler (take 4)
  • From: Jens Axboe
• Re: SATA drive keeps hard resetting
  • From: Matí­as Alejandro Torres
• Re: [PATCH #upstream-fixes] libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size
  • From: Yannick Dirou
• Re: [PATCH 20/30] blk_end_request: changing xsysace (take 4)
  • From: Boaz Harrosh
• Re: [PATCH #upstream-fixes] libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size
  • From: Will Trives
• Re: [PATCH #upstream-fixes] libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size
  • From: Will Trives
• Re: SATA drive keeps hard resetting
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size
  • From: Will Trives
• Re: [Bugme-new] [Bug 9533] New: 2.6.24-rc4: some ahci/acpi interaction causes delays during boot
  • From: Tejun Heo
• Re: [PATCH] sata_nv,adma: fix error when rmmod sata_nv
  • From: Tejun Heo
• Re: [PATCH] sata_mv: improve warnings about Highpoint RocketRAID 23xx cards
  • From: Subrata Modak
• Re: [PATCH #upstream-fixes] libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size
  • From: Tejun Heo
• Re: Recent kernel hosing partition
  • From: Tejun Heo
• Re: [PATCH] pata_legacy: Restructure and revamp
  • From: Andrew Morton
• Re: sata_mv hotplug flaky?
  • From: Jeff Garzik
• [PATCH #upstream-fixes] libata: fix ATAPI draining
  • From: Tejun Heo
• [PATCH #upstream-fixes] libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size
  • From: Tejun Heo
• Re: [PATCH 12/30] blk_end_request: changing ub (take 4)
  • From: Pete Zaitcev
• Re: PROBLEM: WARNING: at kernel/irq/manage.c:158 enable_irq() during boot
  • From: Tejun Heo
• Re: [stable] [PATCH -stable] libata: kill spurious NCQ completion detection
  • From: Tejun Heo
• Re: [PATCH 20/30] blk_end_request: changing xsysace (take 4)
  • From: Grant Likely
• [PATCH 29/30] blk_end_request: cleanup 'uptodate' related code (take 4)
  • From: Kiyoshi Ueda
• [PATCH 30/30] blk_end_request: cleanup of request completion (take 4)
  • From: Kiyoshi Ueda
• [PATCH 28/30] blk_end_request: remove/unexport end_that_request_* (take 4)
  • From: Kiyoshi Ueda
• [PATCH 27/30] blk_end_request: changing scsi (take 4)
  • From: Kiyoshi Ueda
• Re: [stable] [PATCH -stable] libata: kill spurious NCQ completion detection
  • From: Greg KH
• [PATCH 26/30] blk_end_request: add bidi completion interface (take 4)
  • From: Kiyoshi Ueda
• [PATCH 25/30] blk_end_request: changing ide-cd (take 4)
  • From: Kiyoshi Ueda
• [PATCH 22/30] blk_end_request: changing cpqarray (take 4)
  • From: Kiyoshi Ueda
• [PATCH 24/30] blk_end_request: add callback feature (take 4)
  • From: Kiyoshi Ueda
• [PATCH 23/30] blk_end_request: changing ide normal caller (take 4)
  • From: Kiyoshi Ueda
• [PATCH 20/30] blk_end_request: changing xsysace (take 4)
  • From: Kiyoshi Ueda
• [PATCH 21/30] blk_end_request: changing cciss (take 4)
  • From: Kiyoshi Ueda
• [PATCH 19/30] blk_end_request: changing ide-scsi (take 4)
  • From: Kiyoshi Ueda
• [PATCH 18/30] blk_end_request: changing s390 (take 4)
  • From: Kiyoshi Ueda
• [PATCH 17/30] blk_end_request: changing mmc (take 4)
  • From: Kiyoshi Ueda
• [PATCH 15/30] blk_end_request: changing viocd (take 4)
  • From: Kiyoshi Ueda
• [PATCH 14/30] blk_end_request: changing xen-blkfront (take 4)
  • From: Kiyoshi Ueda
• [PATCH 16/30] blk_end_request: changing i2o_block (take 4)
  • From: Kiyoshi Ueda
• [PATCH 13/30] blk_end_request: changing viodasd (take 4)
  • From: Kiyoshi Ueda
• [PATCH 11/30] blk_end_request: changing sx8 (take 4)
  • From: Kiyoshi Ueda
• [PATCH 12/30] blk_end_request: changing ub (take 4)
  • From: Kiyoshi Ueda
• [PATCH 09/30] blk_end_request: changing ps3disk (take 4)
  • From: Kiyoshi Ueda
• [PATCH 10/30] blk_end_request: changing sunvdc (take 4)
  • From: Kiyoshi Ueda
• [PATCH 08/30] blk_end_request: changing nbd (take 4)
  • From: Kiyoshi Ueda
• [PATCH 06/30] blk_end_request: changing DAC960 (take 4)
  • From: Kiyoshi Ueda
• [PATCH 05/30] blk_end_request: changing um (take 4)
  • From: Kiyoshi Ueda
• [PATCH 07/30] blk_end_request: changing floppy (take 4)
  • From: Kiyoshi Ueda
• [PATCH 03/30] blk_end_request: changing block layer core (take 4)
  • From: Kiyoshi Ueda
• [PATCH 04/30] blk_end_request: changing arm (take 4)
  • From: Kiyoshi Ueda
• [PATCH 00/30] blk_end_request: full I/O completion handler (take 4)
  • From: Kiyoshi Ueda
• [PATCH 02/30] blk_end_request: add/export functions to get request size (take 4)
  • From: Kiyoshi Ueda
• [PATCH 01/30] blk_end_request: add new request completion interface (take 4)
  • From: Kiyoshi Ueda
• Re: Iomega ZIP-100 drive unsupported with jmicron JMB361 chip?
  • From: Mark Lord
• Re: Iomega ZIP-100 drive unsupported with jmicron JMB361 chip?
  • From: trash can
• Re: [PATCH 17/21] ide: drop 'initializing' argument from ide_register_hw()
  • From: Sergei Shtylyov
• [PATCH] sata_mv: improve warnings about Highpoint RocketRAID 23xx cards
  • From: Mark Lord
• RE: Responding to 2 thread <2.6.23.8 - Hang with sata_mv (7042)...> AND <Bug: get EXT3-fs error Allocating block in system zone>
  • From: Morrison, Tom
• Re: Responding to 2 thread <2.6.23.8 - Hang with sata_mv (7042)...> AND <Bug: get EXT3-fs error Allocating block in system zone>
  • From: Mark Lord
• Responding to 2 thread <2.6.23.8 - Hang with sata_mv (7042)...> AND <Bug: get EXT3-fs error Allocating block in system zone>
  • From: Morrison, Tom
• Re: Iomega ZIP-100 drive unsupported with jmicron JMB361 chip?
  • From: Mark Lord
• Re: Iomega ZIP-100 drive unsupported with jmicron JMB361 chip?
  • From: Mark Lord
• Re: Iomega ZIP-100 drive unsupported with jmicron JMB361 chip?
  • From: trash can
• Re: PROBLEM: WARNING: at kernel/irq/manage.c:158 enable_irq() during boot
  • From: Wojciech Zareba
• Re: SATA drive keeps hard resetting
  • From: Matí­as Alejandro Torres
• RE: [PATCH] sata_nv,adma: fix error when rmmod sata_nv
  • From: Kuan Luo
• Re: Recent kernel hosing partition
  • From: For Junk Mail
• Re: SATA drive keeps hard resetting
  • From: Michael Tokarev
• SATA drive keeps hard resetting
  • From: Matí­as Alejandro Torres
• Re: Recent kernel hosing partition
  • From: Tejun Heo
• Re: Iomega ZIP-100 drive unsupported with jmicron JMB361 chip?
  • From: Robert Hancock
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Robert Hancock
• Re: [Bugme-new] [Bug 9533] New: 2.6.24-rc4: some ahci/acpi interaction causes delays during boot
  • From: Chuck Ebbert
• Re: [Bugme-new] [Bug 9533] New: 2.6.24-rc4: some ahci/acpi interaction causes delays during boot
  • From: Andrew Morton
• Re: [Bugme-new] [Bug 9533] New: 2.6.24-rc4: some ahci/acpi interaction causes delays during boot
  • From: Andrew Morton
• Re: [PATCH 27/28] blk_end_request: changing scsi mid-layer for bidi (take 3)
  • From: Kiyoshi Ueda
• Re: Recent kernel hosing partition
  • From: For Junk Mail
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Linus Torvalds
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Jens Axboe
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Marco Gatti
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Marco Gatti
• RE: Revisiting - 2.6.23.8 - Hang with sata_mv (7042) + Flat 4Gig (no holes) Memory
  • From: Morrison, Tom
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Mark Lord
• Re: SAS v SATA interface performance
  • From: Mark Lord
• Re: SAS v SATA interface performance
  • From: Mark Lord
• Re: SAS v SATA interface performance
  • From: Mark Lord
• Re: SAS v SATA interface performance
  • From: James Bottomley
• Re: SAS v SATA interface performance
  • From: Jens Axboe
• Re: laptop reboots right after hibernation
  • From: Kjartan Maraas
• Re: laptop reboots right after hibernation
  • From: Tejun Heo
• Re: [PATCH 17/20] ide: fix final status check in drive_cmd_intr()
  • From: Sergei Shtylyov
• Re: Recent kernel hosing partition
  • From: Tejun Heo
• Re: [PATCH 15/20] ide: don't enable local IRQs for PIO-in in driver_cmd_intr()
  • From: Sergei Shtylyov
• Re: [PATCH 16/20] ide: check BUSY and ERROR status bits before reading data in drive_cmd_intr()
  • From: Sergei Shtylyov
• Re: [PATCH 13/20] ide: initialize rq->cmd_type in ide_init_drive_cmd() callers
  • From: Sergei Shtylyov
• Re: [PATCH 12/20] ide: use wait_drive_not_busy() in drive_cmd_intr()
  • From: Sergei Shtylyov
• Re: [PATCH 11/20] ide: kill DATA_READY define
  • From: Sergei Shtylyov
• Re: [PATCH 4/20] ide: clear HOB bit for REQ_TYPE_ATA_CMD requests in ide_end_drive_cmd()
  • From: Sergei Shtylyov
• Re: [PATCH 5/20] ide: fix final status check in task_in_intr()
  • From: Sergei Shtylyov
• Re: [PATCH 1/20] ide: fix ->io_32bit race in set_io_32bit()
  • From: Sergei Shtylyov
• Re: [PATCH pata-2.6] hpt366: change timing register masks
  • From: Sergei Shtylyov
• Re: Possibly SATA related freeze killed networking and RAID
  • From: noah
• Re: [PATCH] hpt366: fix HPT37x PIO mode timings (take 2)
  • From: Sergei Shtylyov
• Re: ata_piix init/performance regression ?
  • From: Tejun Heo
• Re: Failure with SATA DVD-RW
  • From: Tejun Heo
• Re: Hard drives only detected when booting from CD on nVidia MCP67 SATA
  • From: Tejun Heo
• Re: PROBLEM: WARNING: at kernel/irq/manage.c:158 enable_irq() during boot
  • From: Tejun Heo
• Re: Comments - using the qc_defer hook for serializing controllers ?
  • From: Tejun Heo
• Re: ATA ACPI (was Re: Linux 2.6.24-rc4)
  • From: Tejun Heo
• Re: Kernel 2.6.23.9 / P35 Chipset + WD 750GB Drives (reset port)
  • From: Tejun Heo
• Re: Kernel 2.6.23.9 / P35 Chipset + WD 750GB Drives (reset port)
  • From: Tejun Heo
• Re: problems with packet command
  • From: Tejun Heo
• Re: Recent kernel hosing partition
  • From: Tejun Heo
• Re: SAS v SATA interface performance
  • From: Tejun Heo
• Re: SAS v SATA interface performance
  • From: Tejun Heo
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Robert Hancock
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Tejun Heo
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Tejun Heo
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Robert Hancock
• Re: laptop reboots right after hibernation
  • From: Tejun Heo
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Andreas Mohr
• Re: [PATCH 3/20] dtc2278: ->io_32bit setting don't have to be identical for master/slave
  • From: Alan Cox
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Andreas Mohr
• Re: [PATCH 3/20] dtc2278: ->io_32bit setting don't have to be identical for master/slave
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/20] dtc2278: ->io_32bit setting don't have to be identical for master/slave
  • From: Alan Cox
• Re: [PATCH 3/20] dtc2278: ->io_32bit setting don't have to be identical for master/slave
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/20] dtc2278: ->io_32bit setting don't have to be identical for master/slave
  • From: Alan Cox
• Re: laptop reboots right after hibernation
  • From: Kjartan Maraas
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Andreas Mohr
• [PATCH 20/20] ide: remove REQ_TYPE_ATA_CMD
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 19/20] ide: switch ide_cmd_ioctl() to use REQ_TYPE_ATA_TASKFILE requests
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 18/20] ide: switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 17/20] ide: fix final status check in drive_cmd_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 16/20] ide: check BUSY and ERROR status bits before reading data in drive_cmd_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/20] ide: convert "empty" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILE
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/20] ide: don't enable local IRQs for PIO-in in driver_cmd_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/20] ide: initialize rq->cmd_type in ide_init_drive_cmd() callers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/20] ide: use wait_drive_not_busy() in drive_cmd_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/20] ide: kill DATA_READY define
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/20] ide: task_end_request() fix
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 9/20] ide: use rq->nr_sectors in task_end_request()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/20] ide: remove needless ->cursg clearing from task_end_request()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/20] ide: set IDE_TFLAG_IN_* flags before queuing/executing command
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/20] ide-tape: fix handling of non-special requests in ->end_request method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/20] ide: fix final status check in task_in_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/20] ide: clear HOB bit for REQ_TYPE_ATA_CMD requests in ide_end_drive_cmd()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/20] dtc2278: ->io_32bit setting don't have to be identical for master/slave
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/20] ide: fix ->io_32bit race in ide_taskfile_ioctl()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/20] ide: fix ->io_32bit race in set_io_32bit()
  • From: Bartlomiej Zolnierkiewicz
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Jens Axboe
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Marco Gatti
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Jens Axboe
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Andreas Mohr
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Jens Axboe
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Linus Torvalds
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Linus Torvalds
• Re: [PATCH pata-2.6] hpt366: kill set_dma_mode() method wrapper
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH pata-2.6] hpt366: change timing register masks
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] pdc202xx_new: fix Promise TX4 support
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] hpt366: fix HPT37x PIO mode timings (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: Peculiar out-of-sync boot log lines
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Tejun Heo
• Re: WDC WD1600BEVS-2 on NCQ blacklist
  • From: Michael Tokarev
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Tejun Heo
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Rafael J. Wysocki
• WDC WD1600BEVS-2 on NCQ blacklist
  • From: Marco Schuster
• [PATCH #upstream-fixes] libata: add ST3160023AS / 3.42 to NCQ blacklist
  • From: Tejun Heo
• Re: AHCI + ST3160023AS + NCQ problems
  • From: Tejun Heo
• Re: [PATCH 27/28] blk_end_request: changing scsi mid-layer for bidi (take 3)
  • From: Boaz Harrosh
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Tejun Heo
• Re: laptop reboots right after hibernation
  • From: Tejun Heo
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Tejun Heo
• Re: 2.6.24-rc4-mm1 and Very Slow PCMCIA Compact Flash
  • From: Andrew Morton
• Re: 2.6.24-rc4-mm1 and Very Slow PCMCIA Compact Flash
  • From: Zan Lynx
• Re: [PATCH] sata_nv: fix ADMA ATAPI issues with memory over 4GB (v3)
  • From: Robert Hancock
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Robert Hancock
• [PATCH pata-2.6] hpt366: kill set_dma_mode() method wrapper
  • From: Sergei Shtylyov
• [PATCH pata-2.6] hpt366: change timing register masks
  • From: Sergei Shtylyov
• [PATCH] pata_legacy: Restructure and revamp
  • From: Alan Cox
• [PATCH] hpt366: fix HPT37x PIO mode timings (take 2)
  • From: Sergei Shtylyov
• Re: [PATCH] ata.h: Don't do a SATA check for 40wire_relaxed
  • From: Peter Missel
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Andreas Mohr
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Matthew Garrett
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Andreas Mohr
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Andrew Morton
• Re: 2.6.24-rc4-mm1 and Very Slow PCMCIA Compact Flash
  • From: Andrew Morton
• Re: 2.6.24-rc4-git5: Reported regressions from 2.6.23
  • From: Andrew Morton
• Re: 2.6.24-rc4-mm1 and Very Slow PCMCIA Compact Flash
  • From: Zan Lynx
• Re: 2.6.24-rc4-mm1 and Very Slow PCMCIA Compact Flash
  • From: Robert Hancock
• Re: AHCI + ST3160023AS + NCQ problems
  • From: Matheus Izvekov
• [PATCH -stable] libata: kill spurious NCQ completion detection
  • From: Tejun Heo
• Re: 2.6.24-rc4-mm1 and Very Slow PCMCIA Compact Flash
  • From: Zan Lynx
• Re: [PATCH #upstream-fixes] libata: clear link->eh_info.serror from ata_std_postreset()
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libata: clear link->eh_info.serror from ata_std_postreset()
  • From: Jeff Garzik
• Re: AHCI + ST3160023AS + NCQ problems
  • From: Tejun Heo
• [PATCH #upstream-fixes] libata: clear link->eh_info.serror from ata_std_postreset()
  • From: Tejun Heo
• ata_piix init/performance regression ?
  • From: devzero
• [PATCH #upstream-fixes] sata_sil: fix spurious IRQ handling
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libata: kill spurious NCQ completion detection
  • From: Mark Lord
• Re: 2.6.24-rc4-mm1 and Very Slow PCMCIA Compact Flash
  • From: Andrew Morton
• Re: question about sata-error on boot.
  • From: Tejun Heo
• Re: [git patches] libata fixes
  • From: Frans Pop
• Re: [patch] ata: ahci: Enclosure Management via LED
  • From: Pavel Machek
• Re: AHCI + ST3160023AS + NCQ problems
  • From: Matheus Izvekov
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] ahci: don't attach if ICH6 is in combined mode
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] ata_piix: add Toshiba Tecra M4 to broken suspend list
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: kill spurious NCQ completion detection
  • From: Jeff Garzik
• Re: [PATCH pata-2.6] hpt366: fix HPT37x PIO mode timings
  • From: Sergei Shtylyov
• [PATCH pata-2.6] hpt366: fix HPT37x PIO mode timings
  • From: Sergei Shtylyov
• Re: [PATCH 9/9] ide-disk: use do_rw_taskfile()
  • From: Sergei Shtylyov
• Re: [PATCH 10/13] ide-cris: fix DMA methods
  • From: Sergei Shtylyov
• Re: [PATCH 8/21] ide: don't try to unregister interfaces if 'initializing' in ide_register_hw()
  • From: Sergei Shtylyov
• Re: [PATCH 9/21] ide: kill probe_hwif_init()
  • From: Sergei Shtylyov
• Re: Peculiar out-of-sync boot log lines
  • From: Sergei Shtylyov
• Re: question about sata-error on boot.
  • From: Hemmann, Volker Armin
• [PATCH #upstream-fixes] libata: kill spurious NCQ completion detection
  • From: Tejun Heo
• Re: Why we were seeing so many spurious NCQ completions
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: Fix broken Marvell 7042 support.
  • From: Jeff Garzik
• Why we were seeing so many spurious NCQ completions
  • From: Tejun Heo
• Re: Failure with SATA DVD-RW
  • From: Andrew Morton
• Re: Failure with SATA DVD-RW
  • From: Andrew Morton
• Re: Kernel 2.6.23.9 / P35 Chipset + WD 750GB Drives (reset port)
  • From: Andrew Morton
• Re: Hard drives only detected when booting from CD on nVidia MCP67 SATA
  • From: Chuck Ebbert
• Re: Kernel 2.6.23.9 / P35 Chipset + WD 750GB Drives (reset port)
  • From: Justin Piszcz
• Re: [PATCH] sata_mv: Fix broken Marvell 7042 support.
  • From: Mark Lord
• Re: [PATCH] sata_mv: Fix broken Marvell 7042 support.
  • From: Mark Lord
• Re: [PATCH] sata_mv: Fix broken Marvell 7042 support.
  • From: Mark Lord
• Re: Kernel 2.6.23.9 / P35 Chipset + WD 750GB Drives (reset port)
  • From: Andrew Morton
• Re: [PATCH 27/28] blk_end_request: changing scsi mid-layer for bidi (take 3)
  • From: Kiyoshi Ueda
• Re: laptop reboots right after hibernation
  • From: Kjartan Maraas
• Revisiting - 2.6.23.8 - Hang with sata_mv (7042) + Flat 4Gig (no holes) Memory
  • From: Morrison, Tom
• PROBLEM: WARNING: at kernel/irq/manage.c:158 enable_irq() during boot
  • From: wojtekz
• Re: [PATCH 14/14] libata: use PIO for misc ATAPI commands
  • From: Petr Vandrovec
• Re: [PATCH 14/14] libata: use PIO for misc ATAPI commands
  • From: Tejun Heo
• Re: [PATCH 27/28] blk_end_request: changing scsi mid-layer for bidi (take 3)
  • From: Boaz Harrosh
• Re: [PATCH 08/15] libata: improve ATAPI draining
  • From: Albert Lee
• Re: [PATCH 02/15] libata: zero xfer length on ATAPI data xfer IRQ is HSM violation
  • From: Albert Lee
• [PATCH #upstream-fixes] ahci: don't attach if ICH6 is in combined mode
  • From: Tejun Heo
• [PATCH #upstream-fixes] ahci: fix engine reset failed message
  • From: Tejun Heo
• Re: [PATCH] sata_mv: Fix broken Marvell 7042 support.
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: Fix broken Marvell 7042 support.
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: Fix broken Marvell 7042 support.
  • From: Mark Lord
• Re: [PATCH] sata_mv: Fix broken Marvell 7042 support.
  • From: Mark Lord
• Re: laptop reboots right after hibernation
  • From: Tejun Heo
• Re: a question about interrupt of IDE controller( bug 5637)
  • From: Alan Cox
• Re: sata_sil issue on 2.6.22
  • From: Tejun Heo
• Re: a question about interrupt of IDE controller( bug 5637)
  • From: Zhao Yakui
• Re: a question about interrupt of IDE controller( bug 5637)
  • From: Zhao Yakui
• Re: [PATCH 27/28] blk_end_request: changing scsi mid-layer for bidi (take 3)
  • From: Kiyoshi Ueda
• Re: sata_sil issue on 2.6.22
  • From: Tejun Heo
• Re: [PATCH] sata_mv: Fix broken Marvell 7042 support.
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: Fix broken Marvell 7042 support.
  • From: Mark Lord
• Hard drives only detected when booting from CD on nVidia MCP67 SATA
  • From: Chuck Ebbert
• Re: [PATCH] sata_mv: Fix broken Marvell 7042 support.
  • From: Mark Lord
• Re: [PATCH] sata_mv: Fix broken Marvell 7042 support.
  • From: Mark Lord
• Re: [PATCH] sata_mv: Fix broken Marvell 7042 support.
  • From: Mark Lord
• Re: [PATCH 14/14] libata: use PIO for misc ATAPI commands
  • From: Jeff Garzik
• Re: [PATCH v2 2/4] [libata] pata_of_platform: OF-Platform PATA device driver
  • From: Scott Wood
• Re: laptop reboots right after hibernation
  • From: Kjartan Maraas
• Re: [PATCH v2 1/4] [libata] pata_platform: make probe and remove functions device type neutral
  • From: Anton Vorontsov
• Comments - using the qc_defer hook for serializing controllers ?
  • From: Alan Cox
• Re: [PATCH 14/14] libata: use PIO for misc ATAPI commands
  • From: Tejun Heo