cdi->mask is cleared by ide_cdrom_register() which is called after the quirk.
Fix it by adding new ->no_speed_select flag to struct ide_cd_config_flags
and using it in ide_cdrom_register() to set CDC_SELECT_SPEED flag.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ide/ide-cd.c | 5 ++++-
drivers/ide/ide-cd.h | 3 ++-
2 files changed, 6 insertions(+), 2 deletions(-)
Index: b/drivers/ide/ide-cd.c
===================================================================
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -2903,6 +2903,9 @@ static int ide_cdrom_register (ide_drive
if (!CDROM_CONFIG_FLAGS(drive)->ram)
devinfo->mask |= CDC_RAM;
+ if (CDROM_CONFIG_FLAGS(drive)->no_speed_select)
+ devinfo->mask |= CDC_SELECT_SPEED;
+
devinfo->disk = info->disk;
return register_cdrom(devinfo);
}
@@ -3155,7 +3158,7 @@ int ide_cdrom_setup (ide_drive_t *drive)
CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1;
/* the 3231 model does not support the SET_CD_SPEED command */
else if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-3231"))
- cdi->mask |= CDC_SELECT_SPEED;
+ CDROM_CONFIG_FLAGS(drive)->no_speed_select = 1;
#if ! STANDARD_ATAPI
/* by default Sanyo 3 CD changer support is turned off and
Index: b/drivers/ide/ide-cd.h
===================================================================
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -91,7 +91,8 @@ struct ide_cd_config_flags {
__u8 close_tray : 1; /* can close the tray */
__u8 writing : 1; /* pseudo write in progress */
__u8 mo_drive : 1; /* drive is an MO device */
- __u8 reserved : 2;
+ __u8 no_speed_select : 1; /* SET_CD_SPEED command is unsupported. */
+ __u8 reserved : 1;
byte max_speed; /* Max speed of the drive */
};
#define CDROM_CONFIG_FLAGS(drive) (&(((struct cdrom_info *)(drive->driver_data))->config_flags))
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
