Re: 2.6.24-rc6 and earlier: "host bus error" after STR

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

Jeff Garzik wrote:
>> ata3.00: limiting speed to UDMA/33:PIO4
>> ata3.00: exception Emask 0x0 Sact 0x0 Serr 0x0 action 0x2
>> ata3.00: BMDMA stat 0x6
>> ata3.00: cmd ca/00:08:47:66:6e/00:00:00:00:00/eb tag 0 dma 4096 out
>> 	 res 51/84:08:47:66:6e/00:00:00:00:00/eb Emask 0x30 (host bus error)
>> ata3.00: status: { DRDY ERR }
>> ata3.00: error: { ICRC ABRT }
>> ata3: soft resetting link
> 
> host bus == PCI
> 
> So, your PCI bus is crapping itself in a major way.
> 
> One thing to try might be "libata.noacpi=1"

Yeah, BMDMA stat 0x6 is INTR and ERR which means the controller tried to
perform DMA write but couldn't pull data from main memory.  Maybe PCI
bus isn't setup properly after resuming.  Comparing the result of 'lspci
-xxx' before and after resume and see what changed can be helpful.

Thanks.

-- 
tejun

-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux