On Fri, 07 Dec 2007 23:09:43 +0000
Zan Lynx <zlynx@xxxxxxx> wrote:
>
> On Fri, 2007-12-07 at 15:02 -0800, Andrew Morton wrote:
> > On Fri, 07 Dec 2007 20:38:24 +0000
> > Zan Lynx <zlynx@xxxxxxx> wrote:
> >
> > > While I'm reporting problems I'll get this one out there.
> > >
> > > I normally use a USB-2 memory card reader but I also have a PCMCIA
> > > CompactFlash adapter that I use occasionally. During the MM series
> > > kernels 2.6.22 and 23 (I am pretty sure) this didn't work at all. I
> > > don't know about vanilla since I don't run that.
> > >
> > > Now with MM kernels 2.6.24 rc1-4 the PCMCIA adapter works again, but I
> > > only get read rates of 1.6 MB/s. When it used to work in 2.6.20 I got
> > > at least 16 MB/s. The card itself is capable of 30+ in the USB-2
> > > reader.
> > >
>
> > Are we talking about this?
> [cut]
> > > It might be that it auto-configures for PIO-0. I have no idea why it
> > > does that.
> > >
> > > Another interesting thing is that doing a dd to or from the card brings
> > > the rest of the system to a nearly complete halt. Interrupt problem?
> >
> > Where are you seeing the evidence that it autoconfigures for PIO-0?
>
> No, this:
> pccard: PCMCIA card inserted into slot 0
> cs: memory probe 0x50000000-0x57ffffff: excluding 0x50000000-0x57ffffff
> cs: memory probe 0xe0100000-0xe17fffff: excluding 0xe0100000-0xe026ffff 0xe03e0000-0xe082ffff 0xe0b10000-0xe10cffff
> pcmcia: registering new device pcmcia0.0
> scsi2 : pata_pcmcia
> ata3: PATA max PIO0 cmd 0x3100 ctl 0x310e irq 19
> ata3.00: CFA: LEXAR ATA FLASH, V2.00, max PIO6
> ata3.00: 8018640 sectors, multi 0: LBA
> ata3.00: configured for PIO0
> ata3.00: configured for PIO0
> ata3: EH complete
> isa bounce pool size: 16 pages
> scsi 2:0:0:0: Direct-Access ATA LEXAR ATA FLASH V2.0 PQ: 0 ANSI: 5
> sd 2:0:0:0: [sdb] 8018640 512-byte hardware sectors (4106 MB)
> sd 2:0:0:0: [sdb] Write Protect is off
> sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sd 2:0:0:0: [sdb] 8018640 512-byte hardware sectors (4106 MB)
> sd 2:0:0:0: [sdb] Write Protect is off
> sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1
> sd 2:0:0:0: [sdb] Attached SCSI removable disk
>
> Specifically:
> ata3.00: configured for PIO0
> ata3.00: configured for PIO0
Oh, OK. Hopefully the ata guys can help out with this.
I don't know if it actually strictly a regression? Did libata ever support
that device in any earlier kernels?
Alan will be non-respnosive for a few weeks.
<looks>
Maybe pata_pcmcia-minor-cleanups-and-support-for-dual-channel-cards.patch?
Could you try a `patch -R' of the below?
From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/ata/pata_pcmcia.c | 31 +++++++++++++++++--------------
1 file changed, 17 insertions(+), 14 deletions(-)
diff -puN drivers/ata/pata_pcmcia.c~pata_pcmcia-minor-cleanups-and-support-for-dual-channel-cards drivers/ata/pata_pcmcia.c
--- a/drivers/ata/pata_pcmcia.c~pata_pcmcia-minor-cleanups-and-support-for-dual-channel-cards
+++ a/drivers/ata/pata_pcmcia.c
@@ -42,7 +42,7 @@
#define DRV_NAME "pata_pcmcia"
-#define DRV_VERSION "0.3.2"
+#define DRV_VERSION "0.3.3"
/*
* Private data structure to glue stuff together
@@ -198,7 +198,6 @@ do { last_fn = (fn); if ((last_ret = (re
/**
* pcmcia_init_one - attach a PCMCIA interface
* @pdev: pcmcia device
- * @ops: operations for this device
*
* Register a PCMCIA IDE interface. Such interfaces are PIO 0 and
* shared IRQ.
@@ -217,9 +216,10 @@ static int pcmcia_init_one(struct pcmcia
cistpl_cftable_entry_t dflt;
} *stk = NULL;
cistpl_cftable_entry_t *cfg;
- int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM;
+ int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
unsigned long io_base, ctl_base;
void __iomem *io_addr, *ctl_addr;
+ int n_ports = 1;
struct ata_port_operations *ops = &pcmcia_port_ops;
@@ -348,7 +348,7 @@ next_entry:
/* FIXME: Could be more ports at base + 0x10 but we only deal with
one right now */
if (pdev->io.NumPorts1 >= 0x20)
- printk(KERN_WARNING DRV_NAME ": second channel not yet supported.\n");
+ n_ports = 2;
if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620)
ops = &pcmcia_8bit_port_ops;
@@ -357,20 +357,23 @@ next_entry:
* sane.
*/
ret = -ENOMEM;
- host = ata_host_alloc(&pdev->dev, 1);
+ host = ata_host_alloc(&pdev->dev, n_ports);
if (!host)
goto failed;
- ap = host->ports[0];
- ap->ops = ops;
- ap->pio_mask = 1; /* ISA so PIO 0 cycles */
- ap->flags |= ATA_FLAG_SLAVE_POSS;
- ap->ioaddr.cmd_addr = io_addr;
- ap->ioaddr.altstatus_addr = ctl_addr;
- ap->ioaddr.ctl_addr = ctl_addr;
- ata_std_ports(&ap->ioaddr);
+ for (p = 0; p < n_ports; p++) {
+ ap = host->ports[p];
- ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
+ ap->ops = ops;
+ ap->pio_mask = 1; /* ISA so PIO 0 cycles */
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
+ ap->ioaddr.cmd_addr = io_addr + 0x10 * p;
+ ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p;
+ ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p;
+ ata_std_ports(&ap->ioaddr);
+
+ ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
+ }
/* activate */
ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt,
_
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
