On Sat, 15 Dec 2007 21:10:47 +0100 Zsolt Barat <zsolt@xxxxxxxxxxxxxxxx> wrote: > Zsolt Barat schrieb: > > hi list, Let's cc the IDE development list. > > i just bought a "MyBook" called external HD with a fixed enclosure, from > > WD. Connected to the SATA port i constantly get "ATA bus error" messages > > in the kernel log. Is this a known issue? > > > > /var/log/messages: > > Dec 15 18:37:53 proto1 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 > > action 0x2 > > Dec 15 18:37:53 proto1 ata2.00: irq_stat 0x40000001 > > Dec 15 18:37:53 proto1 ata2.00: cmd 35/00:e0:a7:d2:01/00:01:33:00:00/e0 > > tag 0 cdb 0x0 data 245760 out > > Dec 15 18:37:53 proto1 res 51/84:00:86:d4:01/00:00:33:00:00/e0 Emask > > 0x10 (ATA bus error) > > Dec 15 18:37:54 proto1 ata2: soft resetting port > > Dec 15 18:37:54 proto1 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl > > 310) > > Dec 15 18:37:54 proto1 ata2.00: configured for UDMA/33 > > Dec 15 18:37:54 proto1 ata2: EH complete > > Dec 15 18:37:54 proto1 sd 1:0:0:0: [sdb] 976773168 512-byte hardware > > sectors (500108 MB) > > Dec 15 18:37:54 proto1 sd 1:0:0:0: [sdb] Write Protect is off > > Dec 15 18:37:54 proto1 sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > > Dec 15 18:37:54 proto1 sd 1:0:0:0: [sdb] Write cache: enabled, read > > cache: enabled, doesn't support DPO or FUA > > Dec 15 18:38:15 proto1 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 > > action 0x2 > > Dec 15 18:38:15 proto1 ata2.00: irq_stat 0x40000001 > > Dec 15 18:38:15 proto1 ata2.00: cmd 35/00:80:bf:09:14/00:01:33:00:00/e0 > > tag 0 cdb 0x0 data 196608 out > > Dec 15 18:38:15 proto1 res 51/84:00:3e:0b:14/00:00:33:00:00/e0 Emask > > 0x10 (ATA bus error) > > Dec 15 18:38:15 proto1 ata2: soft resetting port > > Dec 15 18:38:15 proto1 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl > > 310) > > Dec 15 18:38:15 proto1 ata2.00: configured for UDMA/33 > > Dec 15 18:38:15 proto1 ata2: EH complete > > Dec 15 18:38:15 proto1 sd 1:0:0:0: [sdb] 976773168 512-byte hardware > > sectors (500108 MB) > > Dec 15 18:38:15 proto1 sd 1:0:0:0: [sdb] Write Protect is off > > Dec 15 18:38:15 proto1 sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > > Dec 15 18:38:15 proto1 sd 1:0:0:0: [sdb] Write cache: enabled, read > > cache: enabled, doesn't support DPO or FUA > > > > lspci: > > 00:00.0 Host bridge: ATI Technologies Inc Unknown device 7910 > > 00:01.0 PCI bridge: ATI Technologies Inc Unknown device 7912 > > 00:07.0 PCI bridge: ATI Technologies Inc Unknown device 7917 > > 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA > > 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) > > 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) > > 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) > > 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) > > 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) > > 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) > > 00:14.0 SMBus: ATI Technologies Inc SB600 SMBus (rev 13) > > 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE > > 00:14.2 Audio device: ATI Technologies Inc SB600 Azalia > > 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge > > 00:14.4 PCI bridge: ATI Technologies Inc SB600 PCI to PCI Bridge > > 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > > HyperTransport Technology Configuration > > 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > > Address Map > > 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > > DRAM Controller > > 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > > Miscellaneous Control > > 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon X1200 Series > > 01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio > > Controller > > 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > > RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) > > 03:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host > > Controller (rev c0) > > > > thanks and best regards > > > > zsolt > > > sorry, kernel version is: 2.6.23-gentoo-r1 > - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
