On Mon, 26 Nov 2007 15:16:13 +0800 Denis Cheng <crquan@xxxxxxxxx> wrote:
> these utilities implemented in lib/hexdump.c are more handy, please use this.
>
> ...
>
> --- a/drivers/scsi/ide-scsi.c
> +++ b/drivers/scsi/ide-scsi.c
> @@ -242,16 +242,6 @@ static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsign
> }
> }
>
> -static void hexdump(u8 *x, int len)
> -{
> - int i;
> -
> - printk("[ ");
> - for (i = 0; i < len; i++)
> - printk("%x ", x[i]);
> - printk("]\n");
> -}
> -
> static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command)
> {
> idescsi_scsi_t *scsi = drive_to_idescsi(drive);
> @@ -282,7 +272,7 @@ static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_co
> pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd;
> if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
> printk ("ide-scsi: %s: queue cmd = ", drive->name);
> - hexdump(pc->c, 6);
> + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, pc->c, 6, 1);
> }
> rq->rq_disk = scsi->disk;
> return ide_do_drive_cmd(drive, rq, ide_preempt);
> @@ -337,7 +327,7 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
> idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer;
> if (log) {
> printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number);
> - hexdump(pc->buffer,16);
> + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, pc->buffer, 16, 1);
> }
> memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE);
> kfree(pc->buffer);
> @@ -816,10 +806,10 @@ static int idescsi_queue (struct scsi_cmnd *cmd,
>
> if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
> printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
> - hexdump(cmd->cmnd, cmd->cmd_len);
> + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, cmd->cmnd, cmd->cmd_len, 1);
> if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) {
> printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number);
> - hexdump(pc->c, 12);
> + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, pc->c, 12, 1);
> }
> }
>
Would you believe that this patch (which removes code) actually increases
drivers/scsi/ide-scsi.o .text by 75 bytes?
I didn't look to see why - probably that huge arg count is hurting,
possibly some additional strings being emitted?
Either way, perhaps a simple little front-end to print_hex_dump() is called
for.
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
