On Tuesday 27 November 2007, Andrew Morton wrote:
> On Mon, 26 Nov 2007 15:16:13 +0800 Denis Cheng <crquan@xxxxxxxxx> wrote:
>
> > these utilities implemented in lib/hexdump.c are more handy, please use this.
> >
> > ...
> >
> > --- a/drivers/scsi/ide-scsi.c
> > +++ b/drivers/scsi/ide-scsi.c
> > @@ -242,16 +242,6 @@ static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsign
> > }
> > }
> >
> > -static void hexdump(u8 *x, int len)
> > -{
> > - int i;
> > -
> > - printk("[ ");
> > - for (i = 0; i < len; i++)
> > - printk("%x ", x[i]);
> > - printk("]\n");
> > -}
> > -
> > static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command)
> > {
> > idescsi_scsi_t *scsi = drive_to_idescsi(drive);
> > @@ -282,7 +272,7 @@ static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_co
> > pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd;
> > if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
> > printk ("ide-scsi: %s: queue cmd = ", drive->name);
> > - hexdump(pc->c, 6);
> > + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, pc->c, 6, 1);
> > }
> > rq->rq_disk = scsi->disk;
> > return ide_do_drive_cmd(drive, rq, ide_preempt);
> > @@ -337,7 +327,7 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
> > idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer;
> > if (log) {
> > printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name,
opc->scsi_cmd->serial_number);
> > - hexdump(pc->buffer,16);
> > + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, pc->buffer, 16, 1);
> > }
> > memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE);
> > kfree(pc->buffer);
> > @@ -816,10 +806,10 @@ static int idescsi_queue (struct scsi_cmnd *cmd,
> >
> > if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
> > printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
> > - hexdump(cmd->cmnd, cmd->cmd_len);
> > + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, cmd->cmnd, cmd->cmd_len, 1);
> > if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) {
> > printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number);
> > - hexdump(pc->c, 12);
> > + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, pc->c, 12, 1);
> > }
> > }
> >
I applied the patch with a couple of fixes:
- s/KERN_DEBUG/KERN_CONT/ as pointed out by Randy
- s/DUMP_PREFIX_OFFSET/DUMP_PREFIX_NONE/
- don't include ASCII dump
- respect 80-columns limit
> Would you believe that this patch (which removes code) actually increases
> drivers/scsi/ide-scsi.o .text by 75 bytes?
Yeah, it somehow shrank down to +58 bytes after fixes but this is still bad.
> I didn't look to see why - probably that huge arg count is hurting,
> possibly some additional strings being emitted?
Probably.
> Either way, perhaps a simple little front-end to print_hex_dump() is called
> for.
Alternatively: it seems that we can easily replace 'prefix_type', 'rowsize',
'groupsize' and 'ascii' args by a single 'flags' arg.
Thanks,
Bart
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
